net: use core MTU range checking in virt drivers
authorJarod Wilson <jarod@redhat.com>
Thu, 20 Oct 2016 17:55:21 +0000 (13:55 -0400)
committerDavid S. Miller <davem@davemloft.net>
Thu, 20 Oct 2016 18:51:09 +0000 (14:51 -0400)
hyperv_net:
- set min/max_mtu, per Haiyang, after rndis_filter_device_add

virtio_net:
- set min/max_mtu
- remove virtnet_change_mtu

vmxnet3:
- set min/max_mtu

xen-netback:
- min_mtu = 0, max_mtu = 65517

xen-netfront:
- min_mtu = 0, max_mtu = 65535

unisys/visor:
- clean up defines a little to not clash with network core or add
  redundat definitions

CC: netdev@vger.kernel.org
CC: virtualization@lists.linux-foundation.org
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: "Michael S. Tsirkin" <mst@redhat.com>
CC: Shrikrishna Khare <skhare@vmware.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Paul Durrant <paul.durrant@citrix.com>
CC: David Kershner <david.kershner@unisys.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/hyperv/hyperv_net.h
drivers/net/hyperv/netvsc_drv.c
drivers/net/virtio_net.c
drivers/net/vmxnet3/vmxnet3_drv.c
drivers/net/xen-netback/interface.c
drivers/net/xen-netfront.c
drivers/staging/unisys/include/iochannel.h
drivers/staging/unisys/visornic/visornic_main.c

index f4fbcb5..3958ada 100644 (file)
@@ -606,8 +606,8 @@ struct nvsp_message {
 } __packed;
 
 
-#define NETVSC_MTU 65536
-#define NETVSC_MTU_MIN 68
+#define NETVSC_MTU 65535
+#define NETVSC_MTU_MIN ETH_MIN_MTU
 
 #define NETVSC_RECEIVE_BUFFER_SIZE             (1024*1024*16)  /* 16MB */
 #define NETVSC_RECEIVE_BUFFER_SIZE_LEGACY      (1024*1024*15)  /* 15MB */
index f0919bd..3b28cf1 100644 (file)
@@ -872,19 +872,12 @@ static int netvsc_change_mtu(struct net_device *ndev, int mtu)
        struct netvsc_device *nvdev = ndevctx->nvdev;
        struct hv_device *hdev = ndevctx->device_ctx;
        struct netvsc_device_info device_info;
-       int limit = ETH_DATA_LEN;
        u32 num_chn;
        int ret = 0;
 
        if (ndevctx->start_remove || !nvdev || nvdev->destroy)
                return -ENODEV;
 
-       if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
-               limit = NETVSC_MTU - ETH_HLEN;
-
-       if (mtu < NETVSC_MTU_MIN || mtu > limit)
-               return -EINVAL;
-
        ret = netvsc_close(ndev);
        if (ret)
                goto out;
@@ -1402,6 +1395,13 @@ static int netvsc_probe(struct hv_device *dev,
        netif_set_real_num_tx_queues(net, nvdev->num_chn);
        netif_set_real_num_rx_queues(net, nvdev->num_chn);
 
+       /* MTU range: 68 - 1500 or 65521 */
+       net->min_mtu = NETVSC_MTU_MIN;
+       if (nvdev->nvsp_version >= NVSP_PROTOCOL_VERSION_2)
+               net->max_mtu = NETVSC_MTU - ETH_HLEN;
+       else
+               net->max_mtu = ETH_DATA_LEN;
+
        ret = register_netdev(net);
        if (ret != 0) {
                pr_err("Unable to register netdev.\n");
index fad84f3..720809f 100644 (file)
@@ -1419,17 +1419,6 @@ static const struct ethtool_ops virtnet_ethtool_ops = {
        .set_settings = virtnet_set_settings,
 };
 
-#define MIN_MTU 68
-#define MAX_MTU 65535
-
-static int virtnet_change_mtu(struct net_device *dev, int new_mtu)
-{
-       if (new_mtu < MIN_MTU || new_mtu > MAX_MTU)
-               return -EINVAL;
-       dev->mtu = new_mtu;
-       return 0;
-}
-
 static const struct net_device_ops virtnet_netdev = {
        .ndo_open            = virtnet_open,
        .ndo_stop            = virtnet_close,
@@ -1437,7 +1426,6 @@ static const struct net_device_ops virtnet_netdev = {
        .ndo_validate_addr   = eth_validate_addr,
        .ndo_set_mac_address = virtnet_set_mac_address,
        .ndo_set_rx_mode     = virtnet_set_rx_mode,
-       .ndo_change_mtu      = virtnet_change_mtu,
        .ndo_get_stats64     = virtnet_stats,
        .ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid,
        .ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid,
@@ -1748,6 +1736,9 @@ static bool virtnet_validate_features(struct virtio_device *vdev)
        return true;
 }
 
+#define MIN_MTU ETH_MIN_MTU
+#define MAX_MTU ETH_MAX_MTU
+
 static int virtnet_probe(struct virtio_device *vdev)
 {
        int i, err;
@@ -1821,6 +1812,10 @@ static int virtnet_probe(struct virtio_device *vdev)
 
        dev->vlan_features = dev->features;
 
+       /* MTU range: 68 - 65535 */
+       dev->min_mtu = MIN_MTU;
+       dev->max_mtu = MAX_MTU;
+
        /* Configuration may specify what MAC to use.  Otherwise random. */
        if (virtio_has_feature(vdev, VIRTIO_NET_F_MAC))
                virtio_cread_bytes(vdev,
@@ -1875,8 +1870,10 @@ static int virtnet_probe(struct virtio_device *vdev)
                mtu = virtio_cread16(vdev,
                                     offsetof(struct virtio_net_config,
                                              mtu));
-               if (virtnet_change_mtu(dev, mtu))
+               if (mtu < dev->min_mtu || mtu > dev->max_mtu)
                        __virtio_clear_bit(vdev, VIRTIO_NET_F_MTU);
+               else
+                       dev->mtu = mtu;
        }
 
        if (vi->any_header_sg)
index b5554f2..0c36de1 100644 (file)
@@ -2969,9 +2969,6 @@ vmxnet3_change_mtu(struct net_device *netdev, int new_mtu)
        struct vmxnet3_adapter *adapter = netdev_priv(netdev);
        int err = 0;
 
-       if (new_mtu < VMXNET3_MIN_MTU || new_mtu > VMXNET3_MAX_MTU)
-               return -EINVAL;
-
        netdev->mtu = new_mtu;
 
        /*
@@ -3428,6 +3425,10 @@ vmxnet3_probe_device(struct pci_dev *pdev,
        vmxnet3_set_ethtool_ops(netdev);
        netdev->watchdog_timeo = 5 * HZ;
 
+       /* MTU range: 60 - 9000 */
+       netdev->min_mtu = VMXNET3_MIN_MTU;
+       netdev->max_mtu = VMXNET3_MAX_MTU;
+
        INIT_WORK(&adapter->work, vmxnet3_reset_work);
        set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state);
 
index 74dc2bf..e30ffd2 100644 (file)
@@ -302,7 +302,7 @@ static int xenvif_close(struct net_device *dev)
 static int xenvif_change_mtu(struct net_device *dev, int mtu)
 {
        struct xenvif *vif = netdev_priv(dev);
-       int max = vif->can_sg ? 65535 - VLAN_ETH_HLEN : ETH_DATA_LEN;
+       int max = vif->can_sg ? ETH_MAX_MTU - VLAN_ETH_HLEN : ETH_DATA_LEN;
 
        if (mtu > max)
                return -EINVAL;
@@ -471,6 +471,9 @@ struct xenvif *xenvif_alloc(struct device *parent, domid_t domid,
 
        dev->tx_queue_len = XENVIF_QUEUE_LENGTH;
 
+       dev->min_mtu = 0;
+       dev->max_mtu = ETH_MAX_MTU - VLAN_ETH_HLEN;
+
        /*
         * Initialise a dummy MAC address. We choose the numerically
         * largest non-broadcast address to prevent the address getting
index e17879d..7d616b0 100644 (file)
@@ -1329,6 +1329,8 @@ static struct net_device *xennet_create_dev(struct xenbus_device *dev)
        netdev->features |= netdev->hw_features;
 
        netdev->ethtool_ops = &xennet_ethtool_ops;
+       netdev->min_mtu = 0;
+       netdev->max_mtu = XEN_NETIF_MAX_TX_SIZE;
        SET_NETDEV_DEV(netdev, &dev->dev);
 
        np->netdev = netdev;
index cba4433..9081b3f 100644 (file)
@@ -113,12 +113,10 @@ enum net_types {
 
 };
 
-#define                ETH_HEADER_SIZE 14      /* size of ethernet header */
-
 #define                ETH_MIN_DATA_SIZE 46    /* minimum eth data size */
-#define                ETH_MIN_PACKET_SIZE (ETH_HEADER_SIZE + ETH_MIN_DATA_SIZE)
+#define                ETH_MIN_PACKET_SIZE (ETH_HLEN + ETH_MIN_DATA_SIZE)
 
-#define                ETH_MAX_MTU 16384       /* maximum data size */
+#define                VISOR_ETH_MAX_MTU 16384 /* maximum data size */
 
 #ifndef MAX_MACADDR_LEN
 #define MAX_MACADDR_LEN 6      /* number of bytes in MAC address */
@@ -288,7 +286,7 @@ struct net_pkt_xmt {
        int len;        /* full length of data in the packet */
        int num_frags;  /* number of fragments in frags containing data */
        struct phys_info frags[MAX_PHYS_INFO];  /* physical page information */
-       char ethhdr[ETH_HEADER_SIZE];   /* the ethernet header  */
+       char ethhdr[ETH_HLEN];  /* the ethernet header  */
        struct {
                /* these are needed for csum at uisnic end */
                u8 valid;       /* 1 = struct is valid - else ignore */
@@ -323,7 +321,7 @@ struct net_pkt_xmtdone {
  */
 #define RCVPOST_BUF_SIZE 4032
 #define MAX_NET_RCV_CHAIN \
-       ((ETH_MAX_MTU + ETH_HEADER_SIZE + RCVPOST_BUF_SIZE - 1) \
+       ((VISOR_ETH_MAX_MTU + ETH_HLEN + RCVPOST_BUF_SIZE - 1) \
        / RCVPOST_BUF_SIZE)
 
 struct net_pkt_rcvpost {
index 1367007..f8a584b 100644 (file)
@@ -791,7 +791,7 @@ visornic_xmit(struct sk_buff *skb, struct net_device *netdev)
         * pointing to
         */
        firstfraglen = skb->len - skb->data_len;
-       if (firstfraglen < ETH_HEADER_SIZE) {
+       if (firstfraglen < ETH_HLEN) {
                spin_unlock_irqrestore(&devdata->priv_lock, flags);
                devdata->busy_cnt++;
                dev_err(&netdev->dev,
@@ -864,7 +864,7 @@ visornic_xmit(struct sk_buff *skb, struct net_device *netdev)
        /* copy ethernet header from first frag into ocmdrsp
         * - everything else will be pass in frags & DMA'ed
         */
-       memcpy(cmdrsp->net.xmt.ethhdr, skb->data, ETH_HEADER_SIZE);
+       memcpy(cmdrsp->net.xmt.ethhdr, skb->data, ETH_HLEN);
        /* copy frags info - from skb->data we need to only provide access
         * beyond eth header
         */