u16 qc;
} __packed;
-enum eap_type {
- EAP_PACKET = 0,
- EAPOL_START,
- EAPOL_LOGOFF,
- EAPOL_KEY,
- EAPOL_ENCAP_ASF_ALERT
-};
-
#define IEEE80211_3ADDR_LEN 24
#define IEEE80211_4ADDR_LEN 30
#define IEEE80211_FCS_LEN 4
> 0: TID
*/
-enum ieee80211_state {
- /* the card is not linked at all */
- IEEE80211_NOLINK = 0,
-
- /* IEEE80211_ASSOCIATING* are for BSS client mode
- * the driver shall not perform RX filtering unless
- * the state is LINKED.
- * The driver shall just check for the state LINKED and
- * defaults to NOLINK for ALL the other states (including
- * LINKED_SCANNING)
- */
-
- /* the association procedure will start (wq scheduling)*/
- IEEE80211_ASSOCIATING,
- IEEE80211_ASSOCIATING_RETRY,
-
- /* the association procedure is sending AUTH request*/
- IEEE80211_ASSOCIATING_AUTHENTICATING,
-
- /* the association procedure has successfully authentcated
- * and is sending association request
- */
- IEEE80211_ASSOCIATING_AUTHENTICATED,
-
- /* the link is ok. the card associated to a BSS or linked
- * to a ibss cell or acting as an AP and creating the bss
- */
- IEEE80211_LINKED,
-
- /* same as LINKED, but the driver shall apply RX filter
- * rules as we are in NO_LINK mode. As the card is still
- * logically linked, but it is doing a syncro site survey
- * then it will be back to LINKED state.
- */
- IEEE80211_LINKED_SCANNING,
-
-};
-
#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
#define DEFAULT_FTS 2346
RTW_WLAN_ACTION_DELBA = 2,
};
-/* HT features action code */
-enum rtw_ieee80211_ht_actioncode {
- RTW_WLAN_ACTION_NOTIFY_CH_WIDTH = 0,
- RTW_WLAN_ACTION_SM_PS = 1,
- RTW_WLAN_ACTION_PSPM = 2,
- RTW_WLAN_ACTION_PCO_PHASE = 3,
- RTW_WLAN_ACTION_MIMO_CSI_MX = 4,
- RTW_WLAN_ACTION_MIMO_NONCP_BF = 5,
- RTW_WLAN_ACTION_MIMP_CP_BF = 6,
- RTW_WLAN_ACTION_ASEL_INDICATES_FB = 7,
- RTW_WLAN_ACTION_HI_INFO_EXCHG = 8,
-};
-
-/* BACK (block-ack) parties */
-enum rtw_ieee80211_back_parties {
- RTW_WLAN_BACK_RECIPIENT = 0,
- RTW_WLAN_BACK_INITIATOR = 1,
- RTW_WLAN_BACK_TIMER = 2,
-};
-
#define OUI_MICROSOFT 0x0050f2 /* Microsoft (also used in Wi-Fi specs)
* 00:50:F2 */
#define WME_OUI_TYPE 2