cpu_to_le32(UMAC_RST_CTRL_FLG_LARC_CLK_EN), 0);
}
+static int iwm_init_calib(struct iwm_priv *iwm, unsigned long cfg_bitmap,
+ unsigned long expected_bitmap, u8 rx_iq_cmd)
+{
+ /* Read RX IQ calibration result from EEPROM */
+ if (test_bit(rx_iq_cmd, &cfg_bitmap)) {
+ iwm_store_rxiq_calib_result(iwm);
+ set_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->calib_done_map);
+ }
+
+ iwm_send_prio_table(iwm);
+ iwm_send_init_calib_cfg(iwm, cfg_bitmap);
+
+ while (iwm->calib_done_map != expected_bitmap) {
+ if (iwm_notif_handle(iwm, CALIBRATION_RES_NOTIFICATION,
+ IWM_SRC_LMAC, WAIT_NOTIF_TIMEOUT)) {
+ IWM_DBG_FW(iwm, DBG, "Initial calibration timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ IWM_DBG_FW(iwm, DBG, "Got calibration result. calib_done_map: "
+ "0x%lx, expected calibrations: 0x%lx\n",
+ iwm->calib_done_map, expected_bitmap);
+ }
+
+ return 0;
+}
+
/*
* We currently have to load 3 FWs:
* 1) The UMAC (Upper MAC).
int iwm_load_fw(struct iwm_priv *iwm)
{
unsigned long init_calib_map, periodic_calib_map;
+ unsigned long expected_calib_map;
int ret;
/* We first start downloading the UMAC */
}
init_calib_map = iwm->conf.calib_map & IWM_CALIB_MAP_INIT_MSK;
+ expected_calib_map = iwm->conf.expected_calib_map &
+ IWM_CALIB_MAP_INIT_MSK;
periodic_calib_map = IWM_CALIB_MAP_PER_LMAC(iwm->conf.calib_map);
- /* Read RX IQ calibration result from EEPROM */
- if (test_bit(PHY_CALIBRATE_RX_IQ_CMD, &init_calib_map)) {
- iwm_store_rxiq_calib_result(iwm);
- set_bit(PHY_CALIBRATE_RX_IQ_CMD, &iwm->calib_done_map);
- }
-
- iwm_send_prio_table(iwm);
- iwm_send_init_calib_cfg(iwm, init_calib_map);
-
- while (iwm->calib_done_map != init_calib_map) {
- ret = iwm_notif_handle(iwm, CALIBRATION_RES_NOTIFICATION,
- IWM_SRC_LMAC, WAIT_NOTIF_TIMEOUT);
- if (ret) {
- IWM_ERR(iwm, "Wait for calibration result timeout\n");
+ ret = iwm_init_calib(iwm, init_calib_map, expected_calib_map,
+ CALIB_CFG_RX_IQ_IDX);
+ if (ret < 0) {
+ /* Let's try the old way */
+ ret = iwm_init_calib(iwm, expected_calib_map,
+ expected_calib_map,
+ PHY_CALIBRATE_RX_IQ_CMD);
+ if (ret < 0) {
+ IWM_ERR(iwm, "Calibration result timeout\n");
goto out;
}
- IWM_DBG_FW(iwm, DBG, "Got calibration result. calib_done_map: "
- "0x%lx, requested calibrations: 0x%lx\n",
- iwm->calib_done_map, init_calib_map);
}
/* Handle LMAC CALIBRATION_COMPLETE notification */
CALIBRATION_CMD_NUM,
};
+enum {
+ CALIB_CFG_RX_BB_IDX = 0,
+ CALIB_CFG_DC_IDX = 1,
+ CALIB_CFG_LO_IDX = 2,
+ CALIB_CFG_TX_IQ_IDX = 3,
+ CALIB_CFG_RX_IQ_IDX = 4,
+ CALIB_CFG_NOISE_IDX = 5,
+ CALIB_CFG_CRYSTAL_IDX = 6,
+ CALIB_CFG_TEMPERATURE_IDX = 7,
+ CALIB_CFG_PAPD_IDX = 8,
+ CALIB_CFG_LAST_IDX = CALIB_CFG_PAPD_IDX,
+ CALIB_CFG_MODULE_NUM,
+};
+
#define IWM_CALIB_MAP_INIT_MSK 0xFFFF
#define IWM_CALIB_MAP_PER_LMAC(m) ((m & 0xFF0000) >> 16)
#define IWM_CALIB_MAP_PER_UMAC(m) ((m & 0xFF000000) >> 24)
+#define IWM_CALIB_OPCODE_TO_INDEX(op) (op - PHY_CALIBRATE_OPCODES_NUM)
struct iwm_lmac_calib_hdr {
u8 opcode;
static struct iwm_conf def_iwm_conf = {
.sdio_ior_timeout = 5000,
- .calib_map = BIT(PHY_CALIBRATE_DC_CMD) |
+ .calib_map = BIT(CALIB_CFG_DC_IDX) |
+ BIT(CALIB_CFG_LO_IDX) |
+ BIT(CALIB_CFG_TX_IQ_IDX) |
+ BIT(CALIB_CFG_RX_IQ_IDX) |
+ BIT(SHILOH_PHY_CALIBRATE_BASE_BAND_CMD),
+ .expected_calib_map = BIT(PHY_CALIBRATE_DC_CMD) |
BIT(PHY_CALIBRATE_LO_CMD) |
BIT(PHY_CALIBRATE_TX_IQ_CMD) |
BIT(PHY_CALIBRATE_RX_IQ_CMD) |