Turns out there's a difference between loading the program with "gdb
PROGRAM", vs loading it with "(gdb) file PROGRAM". The latter results
in the objfile ending up with OBJF_USERLOADED set, while not with the
former. (That difference seems bogus, but still that's not the point
of this patch. We can revisit that afterwards.)
The new code that suppresses breakpoint removal errors for
add-symbol-file objects ends up being too greedy:
/* In some cases, we might not be able to remove a breakpoint in
a shared library that has already been removed, but we have
not yet processed the shlib unload event. Similarly for an
unloaded add-symbol-file object - the user might not yet have
had the chance to remove-symbol-file it. shlib_disabled will
be set if the library/object has already been removed, but
the breakpoint hasn't been uninserted yet, e.g., after
"nosharedlibrary" or "remove-symbol-file" with breakpoints
always-inserted mode. */
if (val
&& (bl->loc_type == bp_loc_software_breakpoint
&& (bl->shlib_disabled
|| solib_name_from_address (bl->pspace, bl->address)
|| userloaded_objfile_contains_address_p (bl->pspace,
bl->address))))
val = 0;
as it turns out that OBJF_USERLOADED can be set for objfiles loaded by
some other means not add-symbol-file. In this case, symbol-file (or
"file", which is really just "exec-file"+"symbol-file").
Recall that add-symbol-file is documented as:
(gdb) help add-symbol-file
Load symbols from FILE, assuming FILE has been dynamically loaded.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
And it's the "dynamically loaded" aspect that the breakpoint.c code
cares about. So make add-symbol-file set OBJF_SHARED on its objfiles
too, and tweak the breakpoint.c code to look for OBJF_SHARED instead
of OBJF_USERLOADED.
This restores back the missing breakpoint removal warning when we let
sss-bp-on-user-bp-2.exp run on native GNU/Linux
(https://sourceware.org/ml/gdb-patches/2014-06/msg00335.html):
(gdb) PASS: gdb.base/sss-bp-on-user-bp-2.exp: define stepi_del_break
stepi_del_break
warning: Error removing breakpoint 3
(gdb) FAIL: gdb.base/sss-bp-on-user-bp-2.exp: stepi_del_break
I say "restores" because this was GDB's behavior in 7.7 and earlier.
And, likewise, "file" with no arguments only started turning
breakpoints set in the main executable to "<pending>" with the
remote-symbol-file patch (
63644780). The old behavior is now
restored, and we break-unload-file.exp test now exercizes both "gdb;
file PROGRAM" and "gdb PROGRAM".
gdb/
2014-06-16 Pedro Alves <palves@redhat.com>
* breakpoint.c (insert_bp_location, remove_breakpoint_1): Adjust.
(disable_breakpoints_in_freed_objfile): Skip objfiles that don't
have OBJF_SHARED set.
* objfiles.c (userloaded_objfile_contains_address_p): Rename to...
(shared_objfile_contains_address_p): ... this. Check OBJF_SHARED
instead of OBJF_USERLOADED.
* objfiles.h (OBJF_SHARED): Update comment.
(userloaded_objfile_contains_address_p): Rename to ...
(shared_objfile_contains_address_p): ... this, and update
comments.
* symfile.c (add_symbol_file_command): Also set OBJF_SHARED in the
new objfile.
(remove_symbol_file_command): Skip objfiles that don't have
OBJF_SHARED set.
gdb/testsuite/
2014-06-16 Pedro Alves <palves@redhat.com>
* gdb.base/break-main-file-remove-fail.c: New file.
* gdb.base/break-main-file-remove-fail.exp: New file.
* gdb.base/break-unload-file.exp: Use build_executable instead of
prepare_for_testing.
(test_break): New parameter "initial_load". Handle it.
(top level): Add initial_load cmdline/file axis.
+2014-06-16 Pedro Alves <palves@redhat.com>
+
+ * breakpoint.c (insert_bp_location, remove_breakpoint_1): Adjust.
+ (disable_breakpoints_in_freed_objfile): Skip objfiles that don't
+ have OBJF_SHARED set.
+ * objfiles.c (userloaded_objfile_contains_address_p): Rename to...
+ (shared_objfile_contains_address_p): ... this. Check OBJF_SHARED
+ instead of OBJF_USERLOADED.
+ * objfiles.h (OBJF_SHARED): Update comment.
+ (userloaded_objfile_contains_address_p): Rename to ...
+ (shared_objfile_contains_address_p): ... this, and update
+ comments.
+ * symfile.c (add_symbol_file_command): Also set OBJF_SHARED in the
+ new objfile.
+ (remove_symbol_file_command): Skip objfiles that don't have
+ OBJF_SHARED set.
+
2014-06-16 Tom Tromey <tromey@redhat.com>
* minsyms.h (prim_record_minimal_symbol)
if ((bp_err == GENERIC_ERROR || bp_err == MEMORY_ERROR)
&& bl->loc_type == bp_loc_software_breakpoint
&& (solib_name_from_address (bl->pspace, bl->address)
- || userloaded_objfile_contains_address_p (bl->pspace,
- bl->address)))
+ || shared_objfile_contains_address_p (bl->pspace,
+ bl->address)))
{
/* See also: disable_breakpoints_in_shlibs. */
bl->shlib_disabled = 1;
whether another dynamic object might have loaded over the
breakpoint's address -- the user might well let us know
about it next with add-symbol-file (the whole point of
- OBJF_USERLOADED is letting the user manually maintain a
+ add-symbol-file is letting the user manually maintain a
list of dynamically loaded objects). If we have the
breakpoint's shadow memory, that is, this is a software
breakpoint managed by GDB, check whether the breakpoint
&& (bl->loc_type == bp_loc_software_breakpoint
&& (bl->shlib_disabled
|| solib_name_from_address (bl->pspace, bl->address)
- || userloaded_objfile_contains_address_p (bl->pspace,
- bl->address))))
+ || shared_objfile_contains_address_p (bl->pspace,
+ bl->address))))
val = 0;
if (val)
if (objfile == NULL)
return;
- /* OBJF_USERLOADED are dynamic modules manually managed by the user
- with add-symbol-file/remove-symbol-file. Similarly to how
- breakpoints in shared libraries are handled in response to
- "nosharedlibrary", mark breakpoints in OBJF_USERLOADED modules
+ /* OBJF_SHARED|OBJF_USERLOADED objfiles are dynamic modules manually
+ managed by the user with add-symbol-file/remove-symbol-file.
+ Similarly to how breakpoints in shared libraries are handled in
+ response to "nosharedlibrary", mark breakpoints in such modules
shlib_disabled so they end up uninserted on the next global
location list update. Shared libraries not loaded by the user
aren't handled here -- they're already handled in
disable_breakpoints_in_unloaded_shlib, called by solib.c's
solib_unloaded observer. We skip objfiles that are not
- OBJF_USERLOADED (nor OBJF_SHARED) as those aren't considered
- dynamic objects (e.g. the main objfile). */
- if ((objfile->flags & OBJF_USERLOADED) == 0)
+ OBJF_SHARED as those aren't considered dynamic objects (e.g. the
+ main objfile). */
+ if ((objfile->flags & OBJF_SHARED) == 0
+ || (objfile->flags & OBJF_USERLOADED) == 0)
return;
ALL_BREAKPOINTS (b)
}
int
-userloaded_objfile_contains_address_p (struct program_space *pspace,
- CORE_ADDR address)
+shared_objfile_contains_address_p (struct program_space *pspace,
+ CORE_ADDR address)
{
struct objfile *objfile;
ALL_PSPACE_OBJFILES (pspace, objfile)
{
- if ((objfile->flags & OBJF_USERLOADED) != 0
+ if ((objfile->flags & OBJF_SHARED) != 0
&& is_addr_in_objfile (address, objfile))
return 1;
}
#define OBJF_REORDERED (1 << 0) /* Functions are reordered */
/* Distinguish between an objfile for a shared library and a "vanilla"
- objfile. (If not set, the objfile may still actually be a solib.
- This can happen if the user created the objfile by using the
- add-symbol-file command. GDB doesn't in that situation actually
- check whether the file is a solib. Rather, the target's
- implementation of the solib interface is responsible for setting
- this flag when noticing solibs used by an inferior.) */
+ objfile. This may come from a target's implementation of the solib
+ interface, from add-symbol-file, or any other mechanism that loads
+ dynamic objects. */
#define OBJF_SHARED (1 << 1) /* From a shared library */
extern int is_addr_in_objfile (CORE_ADDR addr, const struct objfile *objfile);
-/* Return true if ADDRESS maps into one of the sections of the
- userloaded ("add-symbol-file") objfiles of PSPACE and false
- otherwise. */
+/* Return true if ADDRESS maps into one of the sections of a
+ OBJF_SHARED objfile of PSPACE and false otherwise. */
-extern int userloaded_objfile_contains_address_p (struct program_space *pspace,
- CORE_ADDR address);
+extern int shared_objfile_contains_address_p (struct program_space *pspace,
+ CORE_ADDR address);
/* This operation deletes all objfile entries that represent solibs that
weren't explicitly loaded by the user, via e.g., the add-symbol-file
{
struct gdbarch *gdbarch = get_current_arch ();
char *filename = NULL;
- int flags = OBJF_USERLOADED;
+ int flags = OBJF_USERLOADED | OBJF_SHARED;
char *arg;
int section_index = 0;
int argcnt = 0;
ALL_OBJFILES (objf)
{
- if (objf != 0
- && objf->flags & OBJF_USERLOADED
+ if ((objf->flags & OBJF_USERLOADED) != 0
+ && (objf->flags & OBJF_SHARED) != 0
&& objf->pspace == pspace && is_addr_in_objfile (addr, objf))
break;
}
ALL_OBJFILES (objf)
{
- if (objf != 0
- && objf->flags & OBJF_USERLOADED
+ if ((objf->flags & OBJF_USERLOADED) != 0
+ && (objf->flags & OBJF_SHARED) != 0
&& objf->pspace == pspace
&& filename_cmp (filename, objfile_name (objf)) == 0)
break;
+2014-06-16 Pedro Alves <palves@redhat.com>
+
+ * gdb.base/break-main-file-remove-fail.c: New file.
+ * gdb.base/break-main-file-remove-fail.exp: New file.
+ * gdb.base/break-unload-file.exp: Use build_executable instead of
+ prepare_for_testing.
+ (test_break): New parameter "initial_load". Handle it.
+ (top level): Add initial_load cmdline/file axis.
+
2014-06-12 Tom Tromey <tromey@redhat.com>
* gdb.base/completion.exp: Don't use directory name in test.
--- /dev/null
+/* This testcase is part of GDB, the GNU debugger.
+
+ Copyright 2014 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 3 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+#include <unistd.h>
+#include <sys/mman.h>
+
+size_t pg_size;
+
+void
+start (void)
+{
+}
+
+void
+foo (void)
+{
+}
+
+int
+main (void)
+{
+ pg_size = getpagesize ();
+
+ /* This just makes sure the test fails to compile (and is therefore
+ skipped) on targets that don't have munmap. */
+ munmap (0, 0);
+
+ start ();
+ foo ();
+
+ return 0;
+}
--- /dev/null
+# Copyright 2014 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>. */
+
+# Test that GDB isn't silent if it fails to remove a breakpoint from
+# the main program, independently of whether the program was loaded
+# with "file PROGRAM" or directly from the command line with "gdb
+# PROGRAM".
+
+standard_testfile
+
+if {[build_executable "failed to prepare" $testfile $srcfile debug]} {
+ return -1
+}
+
+# Run the test proper. INITIAL_LOAD determines whether the program is
+# initially loaded by the "file" command or by passing it to GDB on
+# the command line.
+proc test_remove_bp { initial_load } {
+ with_test_prefix "$initial_load" {
+ global srcdir subdir binfile
+ global gdb_prompt hex
+ global GDBFLAGS
+
+ gdb_exit
+
+ set saved_gdbflags $GDBFLAGS
+
+ # See "used to behave differently" further below.
+ if { $initial_load == "file" } {
+ gdb_start
+ gdb_file_cmd $binfile
+ } else {
+ global last_loaded_file
+
+ # gdb_file_cmd sets this. This is what gdb_reload
+ # implementations use as binary.
+ set last_loaded_file $binfile
+
+ set GDBFLAGS "$GDBFLAGS $binfile"
+ gdb_start
+ }
+ gdb_reinitialize_dir $srcdir/$subdir
+ gdb_reload
+ set GDBFLAGS $saved_gdbflags
+
+ if ![runto start] {
+ fail "Can't run to start"
+ return
+ }
+
+ delete_breakpoints
+
+ # So we can easily control when are breakpoints removed.
+ gdb_test_no_output "set breakpoint always-inserted on"
+
+ set bp_addr ""
+
+ set test "break foo"
+ gdb_test_multiple $test $test {
+ -re "Breakpoint .* at ($hex).*$gdb_prompt $" {
+ set bp_addr $expect_out(1,string)
+ pass $test
+ }
+ }
+
+ if {$bp_addr == ""} {
+ unsupported "can't extract foo's address"
+ return
+ }
+
+ gdb_test "info break" "y.*$hex.*in foo at.*" \
+ "breakpoint is set"
+
+ # Now unmap the page where the breakpoint is set. Trying to
+ # remove the memory breakpoint afterwards should fail, and GDB
+ # should warn the user about it.
+ set pagesize [get_integer_valueof "pg_size" 0]
+ set align_addr [expr $bp_addr - $bp_addr % $pagesize]
+ set munmap [get_integer_valueof "munmap ($align_addr, $pagesize)" -1]
+
+ if {$munmap != 0} {
+ unsupported "can't munmap foo's page"
+ return
+ }
+
+ gdb_test "delete \$bpnum" \
+ "warning: Error removing breakpoint .*" \
+ "failure to remove breakpoint warns"
+ }
+}
+
+foreach initial_load { "cmdline" "file" } {
+ test_remove_bp $initial_load
+}
standard_testfile
-if {[prepare_for_testing "failed to prepare" $testfile $srcfile debug]} {
+if {[build_executable "failed to prepare" $testfile $srcfile debug]} {
return -1
}
-if ![runto_main] then {
- fail "Can't run to main"
- return 0
-}
-
-# Run the test proper. ALWAYS_INSERT determines whether
-# always-inserted mode is on/off, and BREAK_COMMAND is the break
-# command being tested.
+# Run the test proper. INITIAL_LOAD determines whether the program is
+# initially loaded by the "file" command or by passing it to GDB on
+# the command line. ALWAYS_INSERT determines whether always-inserted
+# mode is on/off. BREAK_COMMAND is the break command being tested.
#
-proc test_break { always_inserted break_command } {
- global gdb_prompt binfile hex
+proc test_break { initial_load always_inserted break_command } {
+ global srcdir subdir binfile
+ global gdb_prompt hex
+ global GDBFLAGS
+
+ append prefix "$initial_load: "
+ append prefix "always-inserted $always_inserted: "
+ append prefix "$break_command"
+ with_test_prefix "$prefix" {
+ gdb_exit
+
+ set saved_gdbflags $GDBFLAGS
+
+ # See "used to behave differently" further below.
+ if { $initial_load == "file" } {
+ gdb_start
+ gdb_file_cmd $binfile
+ } else {
+ global last_loaded_file
+
+ # gdb_file_cmd sets this. This is what gdb_reload
+ # implementations use as binary.
+ set last_loaded_file $binfile
+
+ set GDBFLAGS "$GDBFLAGS $binfile"
+ gdb_start
+ }
- with_test_prefix "always-inserted $always_inserted: $break_command" {
- clean_restart $binfile
+ gdb_reinitialize_dir $srcdir/$subdir
+ gdb_reload
+ set GDBFLAGS $saved_gdbflags
if ![runto_main] then {
fail "Can't run to main"
}
}
- gdb_test "info break" "y.*PENDING.*foo" \
- "breakpoint is pending"
+ # This test used to behave differently depending on whether
+ # the program was first loaded through "file PROGRAM" or "gdb
+ # PROGRAM".
+ set ws "\[ \t\]"
+ gdb_test "info break" "breakpoint${ws}+keep${ws}+n${ws}+$hex${ws}*" \
+ "breakpoint is disabled"
# Now delete the breakpoint from GDB's tables, to make sure
# GDB doesn't reinsert it, masking the bug (with the bug, on
}
}
-# While it doesn't trigger the original bug this is a regression test
-# for, test with breakpoint always-inserted off for extra coverage.
-foreach always_inserted { "off" "on" } {
- test_break $always_inserted "break"
- if {![skip_hw_breakpoint_tests]} {
- test_break $always_inserted "hbreak"
+foreach initial_load { "cmdline" "file" } {
+ # While it doesn't trigger the original bug this is a regression
+ # test for, test with breakpoint always-inserted off for extra
+ # coverage.
+ foreach always_inserted { "off" "on" } {
+ test_break $initial_load $always_inserted "break"
+ if {![skip_hw_breakpoint_tests]} {
+ test_break $initial_load $always_inserted "hbreak"
+ }
}
}
projects / platform / upstream / binutils.git / commitdiff