--- /dev/null
+/*
+ * Shared Transport Line discipline driver Core
+ * Init Manager module responsible for GPIO control
+ * and firmware download
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#define pr_fmt(fmt) "(stk) :" fmt
+#include <linux/platform_device.h>
+#include <linux/jiffies.h>
+#include <linux/firmware.h>
+#include <linux/delay.h>
+#include <linux/wait.h>
+#include <linux/gpio.h>
+
+#include <linux/sched.h>
+
+#include "st_kim.h"
+/* understand BT events for fw response */
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+#include <net/bluetooth/hci.h>
+
+
+static int kim_probe(struct platform_device *pdev);
+static int kim_remove(struct platform_device *pdev);
+
+/* KIM platform device driver structure */
+static struct platform_driver kim_platform_driver = {
+ .probe = kim_probe,
+ .remove = kim_remove,
+ /* TODO: ST driver power management during suspend/resume ?
+ */
+#if 0
+ .suspend = kim_suspend,
+ .resume = kim_resume,
+#endif
+ .driver = {
+ .name = "kim",
+ .owner = THIS_MODULE,
+ },
+};
+
+#ifndef LEGACY_RFKILL_SUPPORT
+static ssize_t show_pid(struct device *dev, struct device_attribute
+ *attr, char *buf);
+static ssize_t store_pid(struct device *dev, struct device_attribute
+ *devattr, char *buf, size_t count);
+static ssize_t show_list(struct device *dev, struct device_attribute
+ *attr, char *buf);
+
+/* structures specific for sysfs entries */
+static struct kobj_attribute pid_attr =
+__ATTR(pid, 0644, (void *)show_pid, (void *)store_pid);
+
+static struct kobj_attribute list_protocols =
+__ATTR(protocols, 0444, (void *)show_list, NULL);
+
+static struct attribute *uim_attrs[] = {
+ &pid_attr.attr,
+ /* add more debug sysfs entries */
+ &list_protocols.attr,
+ NULL,
+};
+
+static struct attribute_group uim_attr_grp = {
+ .attrs = uim_attrs,
+};
+#else
+static int kim_toggle_radio(void*, bool);
+static const struct rfkill_ops kim_rfkill_ops = {
+ .set_block = kim_toggle_radio,
+};
+#endif /* LEGACY_RFKILL_SUPPORT */
+
+/* strings to be used for rfkill entries and by
+ * ST Core to be used for sysfs debug entry
+ */
+#define PROTO_ENTRY(type, name) name
+const unsigned char *protocol_names[] = {
+ PROTO_ENTRY(ST_BT, "Bluetooth"),
+ PROTO_ENTRY(ST_FM, "FM"),
+ PROTO_ENTRY(ST_GPS, "GPS"),
+};
+
+struct kim_data_s *kim_gdata;
+
+/**********************************************************************/
+/* internal functions */
+
+/*
+ * function to return whether the firmware response was proper
+ * in case of error don't complete so that waiting for proper
+ * response times out
+ */
+void validate_firmware_response(struct sk_buff *skb)
+{
+ if (unlikely(skb->data[5] != 0)) {
+ pr_err("no proper response during fw download");
+ pr_err("data6 %x", skb->data[5]);
+ return; /* keep waiting for the proper response */
+ }
+ /* becos of all the script being downloaded */
+ complete_all(&kim_gdata->kim_rcvd);
+ kfree_skb(skb);
+}
+
+/* check for data len received inside kim_int_recv
+ * most often hit the last case to update state to waiting for data
+ */
+static inline int kim_check_data_len(int len)
+{
+ register int room = skb_tailroom(kim_gdata->rx_skb);
+
+ pr_info("len %d room %d", len, room);
+
+ if (!len) {
+ validate_firmware_response(kim_gdata->rx_skb);
+ } else if (len > room) {
+ /* Received packet's payload length is larger.
+ * We can't accommodate it in created skb.
+ */
+ pr_err("Data length is too large len %d room %d", len,
+ room);
+ kfree_skb(kim_gdata->rx_skb);
+ } else {
+ /* Packet header has non-zero payload length and
+ * we have enough space in created skb. Lets read
+ * payload data */
+ kim_gdata->rx_state = ST_BT_W4_DATA;
+ kim_gdata->rx_count = len;
+ return len;
+ }
+
+ /* Change ST LL state to continue to process next
+ * packet */
+ kim_gdata->rx_state = ST_W4_PACKET_TYPE;
+ kim_gdata->rx_skb = NULL;
+ kim_gdata->rx_count = 0;
+
+ return 0;
+}
+
+/* receive function called during firmware download
+ * - firmware download responses on different UART drivers
+ * have been observed to come in bursts of different
+ * tty_receive and hence the logic
+ */
+void kim_int_recv(const unsigned char *data, long count)
+{
+ register char *ptr;
+ struct hci_event_hdr *eh;
+ register int len = 0, type = 0;
+
+ pr_info("%s", __func__);
+ /* Decode received bytes here */
+ ptr = (char *)data;
+ if (unlikely(ptr == NULL)) {
+ pr_err(" received null from TTY ");
+ return;
+ }
+ while (count) {
+ if (kim_gdata->rx_count) {
+ len = min_t(unsigned int, kim_gdata->rx_count, count);
+ memcpy(skb_put(kim_gdata->rx_skb, len), ptr, len);
+ kim_gdata->rx_count -= len;
+ count -= len;
+ ptr += len;
+
+ if (kim_gdata->rx_count)
+ continue;
+
+ /* Check ST RX state machine , where are we? */
+ switch (kim_gdata->rx_state) {
+ /* Waiting for complete packet ? */
+ case ST_BT_W4_DATA:
+ pr_info("Complete pkt received");
+ validate_firmware_response(kim_gdata->rx_skb);
+ kim_gdata->rx_state = ST_W4_PACKET_TYPE;
+ kim_gdata->rx_skb = NULL;
+ continue;
+ /* Waiting for Bluetooth event header ? */
+ case ST_BT_W4_EVENT_HDR:
+ eh = (struct hci_event_hdr *)kim_gdata->
+ rx_skb->data;
+ pr_info("Event header: evt 0x%2.2x"
+ "plen %d", eh->evt, eh->plen);
+ kim_check_data_len(eh->plen);
+ continue;
+ } /* end of switch */
+ } /* end of if rx_state */
+ switch (*ptr) {
+ /* Bluetooth event packet? */
+ case HCI_EVENT_PKT:
+ pr_info("Event packet");
+ kim_gdata->rx_state = ST_BT_W4_EVENT_HDR;
+ kim_gdata->rx_count = HCI_EVENT_HDR_SIZE;
+ type = HCI_EVENT_PKT;
+ break;
+ default:
+ pr_info("unknown packet");
+ ptr++;
+ count--;
+ continue;
+ } /* end of switch *ptr */
+ ptr++;
+ count--;
+ kim_gdata->rx_skb =
+ bt_skb_alloc(HCI_MAX_FRAME_SIZE, GFP_ATOMIC);
+ if (!kim_gdata->rx_skb) {
+ pr_err("can't allocate mem for new packet");
+ kim_gdata->rx_state = ST_W4_PACKET_TYPE;
+ kim_gdata->rx_count = 0;
+ return;
+ } /* not necessary in this case */
+ bt_cb(kim_gdata->rx_skb)->pkt_type = type;
+ } /* end of while count */
+ pr_info("done %s", __func__);
+ return;
+}
+
+static long read_local_version(char *bts_scr_name)
+{
+ unsigned short version = 0, chip = 0, min_ver = 0, maj_ver = 0;
+ char read_ver_cmd[] = { 0x01, 0x01, 0x10, 0x00 };
+
+ pr_info("%s", __func__);
+
+ INIT_COMPLETION(kim_gdata->kim_rcvd);
+ if (4 != st_int_write(kim_gdata->core_data, read_ver_cmd, 4)) {
+ pr_err("kim: couldn't write 4 bytes");
+ return ST_ERR_FAILURE;
+ }
+
+ if (!wait_for_completion_timeout
+ (&kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME))) {
+ pr_err(" waiting for ver info- timed out ");
+ return ST_ERR_FAILURE;
+ }
+
+ version =
+ MAKEWORD(kim_gdata->resp_buffer[13], kim_gdata->resp_buffer[14]);
+ chip = (version & 0x7C00) >> 10;
+ min_ver = (version & 0x007F);
+ maj_ver = (version & 0x0380) >> 7;
+
+ if (version & 0x8000)
+ maj_ver |= 0x0008;
+
+ sprintf(bts_scr_name, "TIInit_%d.%d.%d.bts", chip, maj_ver, min_ver);
+ pr_info("%s", bts_scr_name);
+ return ST_SUCCESS;
+}
+
+/* internal function which parses through the .bts firmware script file
+ * intreprets SEND, DELAY actions only as of now
+ */
+static long download_firmware(void)
+{
+ long err = ST_SUCCESS;
+ long len = 0;
+ register unsigned char *ptr = NULL;
+ register unsigned char *action_ptr = NULL;
+ unsigned char bts_scr_name[30] = { 0 }; /* 30 char long bts scr name? */
+
+ pr_info("%s", __func__);
+
+ err = read_local_version(bts_scr_name);
+ if (err != ST_SUCCESS) {
+ pr_err("kim: failed to read local ver");
+ return err;
+ }
+ err =
+ request_firmware(&kim_gdata->fw_entry, bts_scr_name,
+ &kim_gdata->kim_pdev->dev);
+ if (unlikely((err != 0) || (kim_gdata->fw_entry->data == NULL) ||
+ (kim_gdata->fw_entry->size == 0))) {
+ pr_err(" request_firmware failed(errno %ld) for %s", err,
+ bts_scr_name);
+ return ST_ERR_FAILURE;
+ }
+ ptr = (void *)kim_gdata->fw_entry->data;
+ len = kim_gdata->fw_entry->size;
+ /* bts_header to remove out magic number and
+ * version
+ */
+ ptr += sizeof(struct bts_header);
+ len -= sizeof(struct bts_header);
+
+ while (len > 0 && ptr) {
+ pr_info(" action size %d, type %d ",
+ ((struct bts_action *)ptr)->size,
+ ((struct bts_action *)ptr)->type);
+
+ switch (((struct bts_action *)ptr)->type) {
+ case ACTION_SEND_COMMAND: /* action send */
+ action_ptr = &(((struct bts_action *)ptr)->data[0]);
+ if (unlikely
+ (((struct hci_command *)action_ptr)->opcode ==
+ 0xFF36)) {
+ /* ignore remote change
+ * baud rate HCI VS command */
+ pr_err
+ (" change remote baud\
+ rate command in firmware");
+ break;
+ }
+
+ INIT_COMPLETION(kim_gdata->kim_rcvd);
+ err = st_int_write(kim_gdata->core_data,
+ ((struct bts_action_send *)action_ptr)->data,
+ ((struct bts_action *)ptr)->size);
+ if (unlikely(err < 0)) {
+ release_firmware(kim_gdata->fw_entry);
+ return ST_ERR_FAILURE;
+ }
+ if (!wait_for_completion_timeout
+ (&kim_gdata->kim_rcvd,
+ msecs_to_jiffies(CMD_RESP_TIME))) {
+ pr_err
+ (" response timeout during fw download ");
+ /* timed out */
+ release_firmware(kim_gdata->fw_entry);
+ return ST_ERR_FAILURE;
+ }
+ break;
+ case ACTION_DELAY: /* sleep */
+ pr_info("sleep command in scr");
+ action_ptr = &(((struct bts_action *)ptr)->data[0]);
+ mdelay(((struct bts_action_delay *)action_ptr)->msec);
+ break;
+ }
+ len =
+ len - (sizeof(struct bts_action) +
+ ((struct bts_action *)ptr)->size);
+ ptr =
+ ptr + sizeof(struct bts_action) +
+ ((struct bts_action *)ptr)->size;
+ }
+ /* fw download complete */
+ release_firmware(kim_gdata->fw_entry);
+ return ST_SUCCESS;
+}
+
+/**********************************************************************/
+/* functions called from ST core */
+
+/* function to toggle the GPIO
+ * needs to know whether the GPIO is active high or active low
+ */
+void st_kim_chip_toggle(enum proto_type type, enum kim_gpio_state state)
+{
+ pr_info(" %s ", __func__);
+
+ if (kim_gdata->gpios[type] == -1) {
+ pr_info(" gpio not requested for protocol %s",
+ protocol_names[type]);
+ return;
+ }
+ switch (type) {
+ case ST_BT:
+ /*Do Nothing */
+ break;
+
+ case ST_FM:
+ if (state == KIM_GPIO_ACTIVE)
+ gpio_set_value(kim_gdata->gpios[ST_FM], GPIO_LOW);
+ else
+ gpio_set_value(kim_gdata->gpios[ST_FM], GPIO_HIGH);
+ break;
+
+ case ST_GPS:
+ if (state == KIM_GPIO_ACTIVE)
+ gpio_set_value(kim_gdata->gpios[ST_GPS], GPIO_HIGH);
+ else
+ gpio_set_value(kim_gdata->gpios[ST_GPS], GPIO_LOW);
+ break;
+
+ case ST_MAX:
+ default:
+ break;
+ }
+
+ return;
+}
+
+/* called from ST Core, when REG_IN_PROGRESS (registration in progress)
+ * can be because of
+ * 1. response to read local version
+ * 2. during send/recv's of firmware download
+ */
+void st_kim_recv(void *disc_data, const unsigned char *data, long count)
+{
+ pr_info(" %s ", __func__);
+ /* copy to local buffer */
+ if (unlikely(data[4] == 0x01 && data[5] == 0x10 && data[0] == 0x04)) {
+ /* must be the read_ver_cmd */
+ memcpy(kim_gdata->resp_buffer, data, count);
+ complete_all(&kim_gdata->kim_rcvd);
+ return;
+ } else {
+ kim_int_recv(data, count);
+ /* either completes or times out */
+ }
+ return;
+}
+
+/* to signal completion of line discipline installation
+ * called from ST Core, upon tty_open
+ */
+void st_kim_complete(void)
+{
+ complete(&kim_gdata->ldisc_installed);
+}
+
+/* called from ST Core upon 1st registration
+*/
+long st_kim_start(void)
+{
+ long err = ST_SUCCESS;
+ long retry = POR_RETRY_COUNT;
+ pr_info(" %s", __func__);
+
+ do {
+#ifdef LEGACY_RFKILL_SUPPORT
+ /* TODO: this is only because rfkill sub-system
+ * doesn't send events to user-space if the state
+ * isn't changed
+ */
+ rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 1);
+#endif
+ /* Configure BT nShutdown to HIGH state */
+ gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
+ mdelay(5); /* FIXME: a proper toggle */
+ gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_HIGH);
+ mdelay(100);
+ /* re-initialize the completion */
+ INIT_COMPLETION(kim_gdata->ldisc_installed);
+#ifndef LEGACY_RFKILL_SUPPORT
+ /* send signal to UIM */
+ err = kill_pid(find_get_pid(kim_gdata->uim_pid), SIGUSR2, 0);
+ if (err != 0) {
+ pr_info(" sending SIGUSR2 to uim failed %ld", err);
+ err = ST_ERR_FAILURE;
+ continue;
+ }
+#else
+ /* unblock and send event to UIM via /dev/rfkill */
+ rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 0);
+#endif
+ /* wait for ldisc to be installed */
+ err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
+ msecs_to_jiffies(LDISC_TIME));
+ if (!err) { /* timeout */
+ pr_err("line disc installation timed out ");
+ err = ST_ERR_FAILURE;
+ continue;
+ } else {
+ /* ldisc installed now */
+ pr_info(" line discipline installed ");
+ err = download_firmware();
+ if (err != ST_SUCCESS) {
+ pr_err("download firmware failed");
+ continue;
+ } else { /* on success don't retry */
+ break;
+ }
+ }
+ } while (retry--);
+ return err;
+}
+
+/* called from ST Core, on the last un-registration
+*/
+long st_kim_stop(void)
+{
+ long err = ST_SUCCESS;
+
+ INIT_COMPLETION(kim_gdata->ldisc_installed);
+#ifndef LEGACY_RFKILL_SUPPORT
+ /* send signal to UIM */
+ err = kill_pid(find_get_pid(kim_gdata->uim_pid), SIGUSR2, 1);
+ if (err != 0) {
+ pr_err("sending SIGUSR2 to uim failed %ld", err);
+ return ST_ERR_FAILURE;
+ }
+#else
+ /* set BT rfkill to be blocked */
+ err = rfkill_set_hw_state(kim_gdata->rfkill[ST_BT], 1);
+#endif
+
+ /* wait for ldisc to be un-installed */
+ err = wait_for_completion_timeout(&kim_gdata->ldisc_installed,
+ msecs_to_jiffies(LDISC_TIME));
+ if (!err) { /* timeout */
+ pr_err(" timed out waiting for ldisc to be un-installed");
+ return ST_ERR_FAILURE;
+ }
+
+ /* By default configure BT nShutdown to LOW state */
+ gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
+ mdelay(1);
+ gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_HIGH);
+ mdelay(1);
+ gpio_set_value(kim_gdata->gpios[ST_BT], GPIO_LOW);
+ return err;
+}
+
+/**********************************************************************/
+/* functions called from subsystems */
+
+#ifndef LEGACY_RFKILL_SUPPORT
+/* called when sysfs entry is written to */
+static ssize_t store_pid(struct device *dev, struct device_attribute
+ *devattr, char *buf, size_t count)
+{
+ pr_info("%s: pid %s ", __func__, buf);
+ sscanf(buf, "%ld", &kim_gdata->uim_pid);
+ /* to be made use by kim_start to signal SIGUSR2
+ */
+ return strlen(buf);
+}
+
+/* called when sysfs entry is read from */
+static ssize_t show_pid(struct device *dev, struct device_attribute
+ *attr, char *buf)
+{
+ sprintf(buf, "%ld", kim_gdata->uim_pid);
+ return strlen(buf);
+}
+
+/* called when sysfs entry is read from */
+static ssize_t show_list(struct device *dev, struct device_attribute
+ *attr, char *buf)
+{
+ kim_st_list_protocols(kim_gdata->core_data, buf);
+ return strlen(buf);
+}
+
+#else /* LEGACY_RFKILL_SUPPORT */
+
+/* function called from rfkill subsystem, when someone from
+ * user space would write 0/1 on the sysfs entry
+ * /sys/class/rfkill/rfkill0,1,3/state
+ */
+static int kim_toggle_radio(void *data, bool blocked)
+{
+ enum proto_type type = *((enum proto_type *)data);
+ pr_info(" %s: %d ", __func__, type);
+
+ switch (type) {
+ case ST_BT:
+ /* do nothing */
+ break;
+ case ST_FM:
+ case ST_GPS:
+ if (blocked)
+ st_kim_chip_toggle(type, KIM_GPIO_INACTIVE);
+ else
+ st_kim_chip_toggle(type, KIM_GPIO_ACTIVE);
+ break;
+ case ST_MAX:
+ pr_err(" wrong proto type ");
+ break;
+ }
+ return ST_SUCCESS;
+}
+
+#endif /* LEGACY_RFKILL_SUPPORT */
+
+void st_kim_ref(struct st_data_s **core_data)
+{
+ *core_data = kim_gdata->core_data;
+}
+
+/**********************************************************************/
+/* functions called from platform device driver subsystem
+ * need to have a relevant platform device entry in the platform's
+ * board-*.c file
+ */
+
+static int kim_probe(struct platform_device *pdev)
+{
+ long status;
+ long proto;
+ long *gpios = pdev->dev.platform_data;
+
+ status = st_core_init(&kim_gdata->core_data);
+ if (status != 0) {
+ pr_err(" ST core init failed");
+ return ST_ERR_FAILURE;
+ }
+
+ for (proto = 0; proto < ST_MAX; proto++) {
+ kim_gdata->gpios[proto] = gpios[proto];
+ pr_info(" %ld gpio to be requested", gpios[proto]);
+ }
+
+ for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
+ /* Claim the Bluetooth/FM/GPIO
+ * nShutdown gpio from the system
+ */
+ status = gpio_request(gpios[proto], "kim");
+ if (unlikely(status)) {
+ pr_err(" gpio %ld request failed ", gpios[proto]);
+ proto -= 1;
+ while (proto >= 0) {
+ if (gpios[proto] != -1)
+ gpio_free(gpios[proto]);
+ }
+ return status;
+ }
+
+ /* Configure nShutdown GPIO as output=0 */
+ status =
+ gpio_direction_output(gpios[proto], 0);
+ if (unlikely(status)) {
+ pr_err(" unable to configure gpio %ld",
+ gpios[proto]);
+ proto -= 1;
+ while (proto >= 0) {
+ if (gpios[proto] != -1)
+ gpio_free(gpios[proto]);
+ }
+ return status;
+ }
+ }
+#ifndef LEGACY_RFKILL_SUPPORT
+ /* pdev to contain BT, FM and GPS enable/N-Shutdown GPIOs
+ * execute request_gpio, set output direction
+ */
+ kim_gdata->kim_kobj = kobject_create_and_add("uim", NULL);
+ /* create the sysfs entry for UIM to put in pid */
+ if (sysfs_create_group(kim_gdata->kim_kobj, &uim_attr_grp)) {
+ pr_err(" sysfs entry creation failed");
+ kobject_put(kim_gdata->kim_kobj);
+ /* free requested GPIOs and fail probe */
+ for (proto = ST_BT; proto < ST_MAX; proto++) {
+ if (gpios[proto] != -1)
+ gpio_free(gpios[proto]);
+ }
+ return -1; /* fail insmod */
+ }
+ pr_info(" sysfs entry created ");
+#endif
+ /* get reference of pdev for request_firmware
+ */
+ kim_gdata->kim_pdev = pdev;
+ init_completion(&kim_gdata->kim_rcvd);
+ init_completion(&kim_gdata->ldisc_installed);
+#ifdef LEGACY_RFKILL_SUPPORT
+ for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
+ /* TODO: should all types be rfkill_type_bt ? */
+ kim_gdata->rf_protos[proto] = proto;
+ kim_gdata->rfkill[proto] = rfkill_alloc(protocol_names[proto],
+ &pdev->dev, RFKILL_TYPE_BLUETOOTH,
+ &kim_rfkill_ops, &kim_gdata->rf_protos[proto]);
+ if (kim_gdata->rfkill[proto] == NULL) {
+ pr_err("cannot create rfkill entry for gpio %ld",
+ gpios[proto]);
+ continue;
+ }
+ /* block upon creation */
+ rfkill_init_sw_state(kim_gdata->rfkill[proto], 1);
+ status = rfkill_register(kim_gdata->rfkill[proto]);
+ if (unlikely(status)) {
+ pr_err("rfkill registration failed for gpio %ld",
+ gpios[proto]);
+ rfkill_unregister(kim_gdata->rfkill[proto]);
+ continue;
+ }
+ pr_info("rfkill entry created for %ld", gpios[proto]);
+ }
+#endif
+ return ST_SUCCESS;
+}
+
+static int kim_remove(struct platform_device *pdev)
+{
+ /* free the GPIOs requested
+ */
+ long *gpios = pdev->dev.platform_data;
+ long proto;
+
+ for (proto = 0; (proto < ST_MAX) && (gpios[proto] != -1); proto++) {
+ /* Claim the Bluetooth/FM/GPIO
+ * nShutdown gpio from the system
+ */
+ gpio_free(gpios[proto]);
+#ifdef LEGACY_RFKILL_SUPPORT
+ rfkill_unregister(kim_gdata->rfkill[proto]);
+ rfkill_destroy(kim_gdata->rfkill[proto]);
+ kim_gdata->rfkill[proto] = NULL;
+#endif
+ }
+ pr_info("kim: GPIO Freed");
+#ifndef LEGACY_RFKILL_SUPPORT
+ /* delete the sysfs entries */
+ sysfs_remove_group(kim_gdata->kim_kobj, &uim_attr_grp);
+ kobject_put(kim_gdata->kim_kobj);
+#endif
+ kim_gdata->kim_pdev = NULL;
+ st_core_exit(kim_gdata->core_data);
+ return ST_SUCCESS;
+}
+
+/**********************************************************************/
+/* entry point for ST KIM module, called in from ST Core */
+
+static int __init st_kim_init(void)
+{
+ long ret = ST_SUCCESS;
+ kim_gdata = kzalloc(sizeof(struct kim_data_s), GFP_ATOMIC);
+ if (!kim_gdata) {
+ pr_err("no mem to allocate");
+ return -ENOMEM;
+ }
+
+ ret = platform_driver_register(&kim_platform_driver);
+ if (ret != 0) {
+ pr_err("platform drv registration failed");
+ return ST_ERR_FAILURE;
+ }
+ return ST_SUCCESS;
+}
+
+static void __exit st_kim_deinit(void)
+{
+ /* the following returns void */
+ platform_driver_unregister(&kim_platform_driver);
+ kfree(kim_gdata);
+ kim_gdata = NULL;
+}
+
+
+module_init(st_kim_init);
+module_exit(st_kim_deinit);
+MODULE_AUTHOR("Pavan Savoy <pavan_savoy@ti.com>");
+MODULE_DESCRIPTION("Shared Transport Driver for TI BT/FM/GPS combo chips ");
+MODULE_LICENSE("GPL");
projects / platform / kernel / linux-exynos.git / commitdiff