fbdev: bfin_adv7393fb: new Blackfin ADV7393 driver
authorMichael Hennerich <michael.hennerich@analog.com>
Wed, 24 Nov 2010 09:33:59 +0000 (09:33 +0000)
committerPaul Mundt <lethal@linux-sh.org>
Fri, 26 Nov 2010 06:06:39 +0000 (15:06 +0900)
Driver for ADV7393 add-on card for multiple Blackfin boards.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
drivers/video/Kconfig
drivers/video/Makefile
drivers/video/bfin_adv7393fb.c [new file with mode: 0644]
drivers/video/bfin_adv7393fb.h [new file with mode: 0644]

index 04d09ca..e231041 100644 (file)
@@ -657,6 +657,58 @@ config FB_BF537_LQ035
          To compile this driver as a module, choose M here: the
          module will be called bf537-lq035.
 
+config FB_BFIN_7393
+       tristate "Blackfin ADV7393 Video encoder"
+       depends on FB && BLACKFIN
+       select I2C
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       help
+         This is the framebuffer device for a ADV7393 video encoder
+         attached to a Blackfin on the PPI port.
+         If your Blackfin board has a ADV7393 select Y.
+
+         To compile this driver as a module, choose M here: the
+         module will be called bfin_adv7393fb.
+
+choice
+       prompt  "Video mode support"
+       depends on FB_BFIN_7393
+       default NTSC
+
+config NTSC
+       bool 'NTSC 720x480'
+
+config PAL
+       bool 'PAL 720x576'
+
+config NTSC_640x480
+       bool 'NTSC 640x480 (Experimental)'
+
+config PAL_640x480
+       bool 'PAL 640x480 (Experimental)'
+
+config NTSC_YCBCR
+       bool 'NTSC 720x480 YCbCR input'
+
+config PAL_YCBCR
+       bool 'PAL 720x576 YCbCR input'
+
+endchoice
+
+choice
+       prompt  "Size of ADV7393 frame buffer memory Single/Double Size"
+       depends on (FB_BFIN_7393)
+       default ADV7393_1XMEM
+
+config ADV7393_1XMEM
+       bool 'Single'
+
+config ADV7393_2XMEM
+       bool 'Double'
+endchoice
+
 config FB_STI
        tristate "HP STI frame buffer device support"
        depends on FB && PARISC
index cf1c45d..bdf6264 100644 (file)
@@ -148,6 +148,7 @@ obj-$(CONFIG_FB_BF537_LQ035)      += bf537-lq035.o
 obj-$(CONFIG_FB_BF54X_LQ043)     += bf54x-lq043fb.o
 obj-$(CONFIG_FB_BFIN_LQ035Q1)     += bfin-lq035q1-fb.o
 obj-$(CONFIG_FB_BFIN_T350MCQB)   += bfin-t350mcqb-fb.o
+obj-$(CONFIG_FB_BFIN_7393)        += bfin_adv7393fb.o
 obj-$(CONFIG_FB_MX3)             += mx3fb.o
 obj-$(CONFIG_FB_DA8XX)           += da8xx-fb.o
 
diff --git a/drivers/video/bfin_adv7393fb.c b/drivers/video/bfin_adv7393fb.c
new file mode 100644 (file)
index 0000000..8486f54
--- /dev/null
@@ -0,0 +1,832 @@
+/*
+ * Frame buffer driver for ADV7393/2 video encoder
+ *
+ * Copyright 2006-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or late.
+ */
+
+/*
+ * TODO: Remove Globals
+ * TODO: Code Cleanup
+ */
+
+#define pr_fmt(fmt) DRIVER_NAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <asm/blackfin.h>
+#include <asm/irq.h>
+#include <asm/dma.h>
+#include <linux/uaccess.h>
+#include <linux/gpio.h>
+#include <asm/portmux.h>
+
+#include <linux/dma-mapping.h>
+#include <linux/proc_fs.h>
+#include <linux/platform_device.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c-dev.h>
+
+#include "bfin_adv7393fb.h"
+
+static int mode = VMODE;
+static int mem = VMEM;
+static int nocursor = 1;
+
+static const unsigned short ppi_pins[] = {
+       P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2,
+       P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, P_PPI0_D3,
+       P_PPI0_D4, P_PPI0_D5, P_PPI0_D6, P_PPI0_D7,
+       P_PPI0_D8, P_PPI0_D9, P_PPI0_D10, P_PPI0_D11,
+       P_PPI0_D12, P_PPI0_D13, P_PPI0_D14, P_PPI0_D15,
+       0
+};
+
+/*
+ * card parameters
+ */
+
+static struct bfin_adv7393_fb_par {
+       /* structure holding blackfin / adv7393 paramters when
+          screen is blanked */
+       struct {
+               u8 Mode;        /* ntsc/pal/? */
+       } vga_state;
+       atomic_t ref_count;
+} bfin_par;
+
+/* --------------------------------------------------------------------- */
+
+static struct fb_var_screeninfo bfin_adv7393_fb_defined = {
+       .xres = 720,
+       .yres = 480,
+       .xres_virtual = 720,
+       .yres_virtual = 480,
+       .bits_per_pixel = 16,
+       .activate = FB_ACTIVATE_TEST,
+       .height = -1,
+       .width = -1,
+       .left_margin = 0,
+       .right_margin = 0,
+       .upper_margin = 0,
+       .lower_margin = 0,
+       .vmode = FB_VMODE_INTERLACED,
+       .red = {11, 5, 0},
+       .green = {5, 6, 0},
+       .blue = {0, 5, 0},
+       .transp = {0, 0, 0},
+};
+
+static struct fb_fix_screeninfo bfin_adv7393_fb_fix __devinitdata = {
+       .id = "BFIN ADV7393",
+       .smem_len = 720 * 480 * 2,
+       .type = FB_TYPE_PACKED_PIXELS,
+       .visual = FB_VISUAL_TRUECOLOR,
+       .xpanstep = 0,
+       .ypanstep = 0,
+       .line_length = 720 * 2,
+       .accel = FB_ACCEL_NONE
+};
+
+static struct fb_ops bfin_adv7393_fb_ops = {
+       .owner = THIS_MODULE,
+       .fb_open = bfin_adv7393_fb_open,
+       .fb_release = bfin_adv7393_fb_release,
+       .fb_check_var = bfin_adv7393_fb_check_var,
+       .fb_pan_display = bfin_adv7393_fb_pan_display,
+       .fb_blank = bfin_adv7393_fb_blank,
+       .fb_fillrect = cfb_fillrect,
+       .fb_copyarea = cfb_copyarea,
+       .fb_imageblit = cfb_imageblit,
+       .fb_cursor = bfin_adv7393_fb_cursor,
+       .fb_setcolreg = bfin_adv7393_fb_setcolreg,
+};
+
+static int dma_desc_list(struct adv7393fb_device *fbdev, u16 arg)
+{
+       if (arg == BUILD) {     /* Build */
+               fbdev->vb1 = l1_data_sram_zalloc(sizeof(struct dmasg));
+               if (fbdev->vb1 == NULL)
+                       goto error;
+
+               fbdev->av1 = l1_data_sram_zalloc(sizeof(struct dmasg));
+               if (fbdev->av1 == NULL)
+                       goto error;
+
+               fbdev->vb2 = l1_data_sram_zalloc(sizeof(struct dmasg));
+               if (fbdev->vb2 == NULL)
+                       goto error;
+
+               fbdev->av2 = l1_data_sram_zalloc(sizeof(struct dmasg));
+               if (fbdev->av2 == NULL)
+                       goto error;
+
+               /* Build linked DMA descriptor list */
+               fbdev->vb1->next_desc_addr = fbdev->av1;
+               fbdev->av1->next_desc_addr = fbdev->vb2;
+               fbdev->vb2->next_desc_addr = fbdev->av2;
+               fbdev->av2->next_desc_addr = fbdev->vb1;
+
+               /* Save list head */
+               fbdev->descriptor_list_head = fbdev->av2;
+
+               /* Vertical Blanking Field 1 */
+               fbdev->vb1->start_addr = VB_DUMMY_MEMORY_SOURCE;
+               fbdev->vb1->cfg = DMA_CFG_VAL;
+
+               fbdev->vb1->x_count =
+                   fbdev->modes[mode].xres + fbdev->modes[mode].boeft_blank;
+
+               fbdev->vb1->x_modify = 0;
+               fbdev->vb1->y_count = fbdev->modes[mode].vb1_lines;
+               fbdev->vb1->y_modify = 0;
+
+               /* Active Video Field 1 */
+
+               fbdev->av1->start_addr = (unsigned long)fbdev->fb_mem;
+               fbdev->av1->cfg = DMA_CFG_VAL;
+               fbdev->av1->x_count =
+                   fbdev->modes[mode].xres + fbdev->modes[mode].boeft_blank;
+               fbdev->av1->x_modify = fbdev->modes[mode].bpp / 8;
+               fbdev->av1->y_count = fbdev->modes[mode].a_lines;
+               fbdev->av1->y_modify =
+                   (fbdev->modes[mode].xres - fbdev->modes[mode].boeft_blank +
+                    1) * (fbdev->modes[mode].bpp / 8);
+
+               /* Vertical Blanking Field 2 */
+
+               fbdev->vb2->start_addr = VB_DUMMY_MEMORY_SOURCE;
+               fbdev->vb2->cfg = DMA_CFG_VAL;
+               fbdev->vb2->x_count =
+                   fbdev->modes[mode].xres + fbdev->modes[mode].boeft_blank;
+
+               fbdev->vb2->x_modify = 0;
+               fbdev->vb2->y_count = fbdev->modes[mode].vb2_lines;
+               fbdev->vb2->y_modify = 0;
+
+               /* Active Video Field 2 */
+
+               fbdev->av2->start_addr =
+                   (unsigned long)fbdev->fb_mem + fbdev->line_len;
+
+               fbdev->av2->cfg = DMA_CFG_VAL;
+
+               fbdev->av2->x_count =
+                   fbdev->modes[mode].xres + fbdev->modes[mode].boeft_blank;
+
+               fbdev->av2->x_modify = (fbdev->modes[mode].bpp / 8);
+               fbdev->av2->y_count = fbdev->modes[mode].a_lines;
+
+               fbdev->av2->y_modify =
+                   (fbdev->modes[mode].xres - fbdev->modes[mode].boeft_blank +
+                    1) * (fbdev->modes[mode].bpp / 8);
+
+               return 1;
+       }
+
+error:
+       l1_data_sram_free(fbdev->vb1);
+       l1_data_sram_free(fbdev->av1);
+       l1_data_sram_free(fbdev->vb2);
+       l1_data_sram_free(fbdev->av2);
+
+       return 0;
+}
+
+static int bfin_config_dma(struct adv7393fb_device *fbdev)
+{
+       BUG_ON(!(fbdev->fb_mem));
+
+       set_dma_x_count(CH_PPI, fbdev->descriptor_list_head->x_count);
+       set_dma_x_modify(CH_PPI, fbdev->descriptor_list_head->x_modify);
+       set_dma_y_count(CH_PPI, fbdev->descriptor_list_head->y_count);
+       set_dma_y_modify(CH_PPI, fbdev->descriptor_list_head->y_modify);
+       set_dma_start_addr(CH_PPI, fbdev->descriptor_list_head->start_addr);
+       set_dma_next_desc_addr(CH_PPI,
+                              fbdev->descriptor_list_head->next_desc_addr);
+       set_dma_config(CH_PPI, fbdev->descriptor_list_head->cfg);
+
+       return 1;
+}
+
+static void bfin_disable_dma(void)
+{
+       bfin_write_DMA0_CONFIG(bfin_read_DMA0_CONFIG() & ~DMAEN);
+}
+
+static void bfin_config_ppi(struct adv7393fb_device *fbdev)
+{
+       if (ANOMALY_05000183) {
+               bfin_write_TIMER2_CONFIG(WDTH_CAP);
+               bfin_write_TIMER_ENABLE(TIMEN2);
+       }
+
+       bfin_write_PPI_CONTROL(0x381E);
+       bfin_write_PPI_FRAME(fbdev->modes[mode].tot_lines);
+       bfin_write_PPI_COUNT(fbdev->modes[mode].xres +
+                            fbdev->modes[mode].boeft_blank - 1);
+       bfin_write_PPI_DELAY(fbdev->modes[mode].aoeft_blank - 1);
+}
+
+static void bfin_enable_ppi(void)
+{
+       bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN);
+}
+
+static void bfin_disable_ppi(void)
+{
+       bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() & ~PORT_EN);
+}
+
+static inline int adv7393_write(struct i2c_client *client, u8 reg, u8 value)
+{
+       return i2c_smbus_write_byte_data(client, reg, value);
+}
+
+static inline int adv7393_read(struct i2c_client *client, u8 reg)
+{
+       return i2c_smbus_read_byte_data(client, reg);
+}
+
+static int
+adv7393_write_block(struct i2c_client *client,
+                   const u8 *data, unsigned int len)
+{
+       int ret = -1;
+       u8 reg;
+
+       while (len >= 2) {
+               reg = *data++;
+               ret = adv7393_write(client, reg, *data++);
+               if (ret < 0)
+                       break;
+               len -= 2;
+       }
+
+       return ret;
+}
+
+static int adv7393_mode(struct i2c_client *client, u16 mode)
+{
+       switch (mode) {
+       case POWER_ON:          /* ADV7393 Sleep mode OFF */
+               adv7393_write(client, 0x00, 0x1E);
+               break;
+       case POWER_DOWN:        /* ADV7393 Sleep mode ON */
+               adv7393_write(client, 0x00, 0x1F);
+               break;
+       case BLANK_OFF:         /* Pixel Data Valid */
+               adv7393_write(client, 0x82, 0xCB);
+               break;
+       case BLANK_ON:          /* Pixel Data Invalid */
+               adv7393_write(client, 0x82, 0x8B);
+               break;
+       default:
+               return -EINVAL;
+               break;
+       }
+       return 0;
+}
+
+static irqreturn_t ppi_irq_error(int irq, void *dev_id)
+{
+
+       struct adv7393fb_device *fbdev = (struct adv7393fb_device *)dev_id;
+
+       u16 status = bfin_read_PPI_STATUS();
+
+       pr_debug("%s: PPI Status = 0x%X\n", __func__, status);
+
+       if (status) {
+               bfin_disable_dma();     /* TODO: Check Sequence */
+               bfin_disable_ppi();
+               bfin_clear_PPI_STATUS();
+               bfin_config_dma(fbdev);
+               bfin_enable_ppi();
+       }
+
+       return IRQ_HANDLED;
+
+}
+
+static int proc_output(char *buf)
+{
+       char *p = buf;
+
+       p += sprintf(p,
+               "Usage:\n"
+               "echo 0x[REG][Value] > adv7393\n"
+               "example: echo 0x1234 >adv7393\n"
+               "writes 0x34 into Register 0x12\n");
+
+       return p - buf;
+}
+
+static int
+adv7393_read_proc(char *page, char **start, off_t off,
+                 int count, int *eof, void *data)
+{
+       int len;
+
+       len = proc_output(page);
+       if (len <= off + count)
+               *eof = 1;
+       *start = page + off;
+       len -= off;
+       if (len > count)
+               len = count;
+       if (len < 0)
+               len = 0;
+       return len;
+}
+
+static int
+adv7393_write_proc(struct file *file, const char __user * buffer,
+                  unsigned long count, void *data)
+{
+       struct adv7393fb_device *fbdev = data;
+       char line[8];
+       unsigned int val;
+       int ret;
+
+       ret = copy_from_user(line, buffer, count);
+       if (ret)
+               return -EFAULT;
+
+       val = simple_strtoul(line, NULL, 0);
+       adv7393_write(fbdev->client, val >> 8, val & 0xff);
+
+       return count;
+}
+
+static int __devinit bfin_adv7393_fb_probe(struct i2c_client *client,
+                                          const struct i2c_device_id *id)
+{
+       int ret = 0;
+       struct proc_dir_entry *entry;
+       int num_modes = ARRAY_SIZE(known_modes);
+
+       struct adv7393fb_device *fbdev = NULL;
+
+       if (mem > 2) {
+               dev_err(&client->dev, "mem out of allowed range [1;2]\n");
+               return -EINVAL;
+       }
+
+       if (mode > num_modes) {
+               dev_err(&client->dev, "mode %d: not supported", mode);
+               return -EFAULT;
+       }
+
+       fbdev = kzalloc(sizeof(*fbdev), GFP_KERNEL);
+       if (!fbdev) {
+               dev_err(&client->dev, "failed to allocate device private record");
+               return -ENOMEM;
+       }
+
+       i2c_set_clientdata(client, fbdev);
+
+       fbdev->modes = known_modes;
+       fbdev->client = client;
+
+       fbdev->fb_len =
+           mem * fbdev->modes[mode].xres * fbdev->modes[mode].xres *
+           (fbdev->modes[mode].bpp / 8);
+
+       fbdev->line_len =
+           fbdev->modes[mode].xres * (fbdev->modes[mode].bpp / 8);
+
+       /* Workaround "PPI Does Not Start Properly In Specific Mode" */
+       if (ANOMALY_05000400) {
+               if (gpio_request(P_IDENT(P_PPI0_FS3), "PPI0_FS3")) {
+                       dev_err(&client->dev, "PPI0_FS3 GPIO request failed\n");
+                       ret = -EBUSY;
+                       goto out_8;
+               }
+               gpio_direction_output(P_IDENT(P_PPI0_FS3), 0);
+       }
+
+       if (peripheral_request_list(ppi_pins, DRIVER_NAME)) {
+               dev_err(&client->dev, "requesting PPI peripheral failed\n");
+               ret = -EFAULT;
+               goto out_8;
+       }
+
+       fbdev->fb_mem =
+           dma_alloc_coherent(NULL, fbdev->fb_len, &fbdev->dma_handle,
+                              GFP_KERNEL);
+
+       if (NULL == fbdev->fb_mem) {
+               dev_err(&client->dev, "couldn't allocate dma buffer (%d bytes)\n",
+                      (u32) fbdev->fb_len);
+               ret = -ENOMEM;
+               goto out_7;
+       }
+
+       fbdev->info.screen_base = (void *)fbdev->fb_mem;
+       bfin_adv7393_fb_fix.smem_start = (int)fbdev->fb_mem;
+
+       bfin_adv7393_fb_fix.smem_len = fbdev->fb_len;
+       bfin_adv7393_fb_fix.line_length = fbdev->line_len;
+
+       if (mem > 1)
+               bfin_adv7393_fb_fix.ypanstep = 1;
+
+       bfin_adv7393_fb_defined.red.length = 5;
+       bfin_adv7393_fb_defined.green.length = 6;
+       bfin_adv7393_fb_defined.blue.length = 5;
+
+       bfin_adv7393_fb_defined.xres = fbdev->modes[mode].xres;
+       bfin_adv7393_fb_defined.yres = fbdev->modes[mode].yres;
+       bfin_adv7393_fb_defined.xres_virtual = fbdev->modes[mode].xres;
+       bfin_adv7393_fb_defined.yres_virtual = mem * fbdev->modes[mode].yres;
+       bfin_adv7393_fb_defined.bits_per_pixel = fbdev->modes[mode].bpp;
+
+       fbdev->info.fbops = &bfin_adv7393_fb_ops;
+       fbdev->info.var = bfin_adv7393_fb_defined;
+       fbdev->info.fix = bfin_adv7393_fb_fix;
+       fbdev->info.par = &bfin_par;
+       fbdev->info.flags = FBINFO_DEFAULT;
+
+       fbdev->info.pseudo_palette = kzalloc(sizeof(u32) * 16, GFP_KERNEL);
+       if (!fbdev->info.pseudo_palette) {
+               dev_err(&client->dev, "failed to allocate pseudo_palette\n");
+               ret = -ENOMEM;
+               goto out_6;
+       }
+
+       if (fb_alloc_cmap(&fbdev->info.cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0) < 0) {
+               dev_err(&client->dev, "failed to allocate colormap (%d entries)\n",
+                          BFIN_LCD_NBR_PALETTE_ENTRIES);
+               ret = -EFAULT;
+               goto out_5;
+       }
+
+       if (request_dma(CH_PPI, "BF5xx_PPI_DMA") < 0) {
+               dev_err(&client->dev, "unable to request PPI DMA\n");
+               ret = -EFAULT;
+               goto out_4;
+       }
+
+       if (request_irq(IRQ_PPI_ERROR, ppi_irq_error, IRQF_DISABLED,
+                       "PPI ERROR", fbdev) < 0) {
+               dev_err(&client->dev, "unable to request PPI ERROR IRQ\n");
+               ret = -EFAULT;
+               goto out_3;
+       }
+
+       fbdev->open = 0;
+
+       ret = adv7393_write_block(client, fbdev->modes[mode].adv7393_i2c_initd,
+                               fbdev->modes[mode].adv7393_i2c_initd_len);
+
+       if (ret) {
+               dev_err(&client->dev, "i2c attach: init error\n");
+               goto out_1;
+       }
+
+
+       if (register_framebuffer(&fbdev->info) < 0) {
+               dev_err(&client->dev, "unable to register framebuffer\n");
+               ret = -EFAULT;
+               goto out_1;
+       }
+
+       dev_info(&client->dev, "fb%d: %s frame buffer device\n",
+              fbdev->info.node, fbdev->info.fix.id);
+       dev_info(&client->dev, "fb memory address : 0x%p\n", fbdev->fb_mem);
+
+       entry = create_proc_entry("driver/adv7393", 0, NULL);
+       if (!entry) {
+               dev_err(&client->dev, "unable to create /proc entry\n");
+               ret = -EFAULT;
+               goto out_0;
+       }
+
+       entry->read_proc = adv7393_read_proc;
+       entry->write_proc = adv7393_write_proc;
+       entry->data = fbdev;
+
+       return 0;
+
+ out_0:
+       unregister_framebuffer(&fbdev->info);
+ out_1:
+       free_irq(IRQ_PPI_ERROR, fbdev);
+ out_3:
+       free_dma(CH_PPI);
+ out_4:
+       dma_free_coherent(NULL, fbdev->fb_len, fbdev->fb_mem,
+                         fbdev->dma_handle);
+ out_5:
+       fb_dealloc_cmap(&fbdev->info.cmap);
+ out_6:
+       kfree(fbdev->info.pseudo_palette);
+ out_7:
+       peripheral_free_list(ppi_pins);
+ out_8:
+       kfree(fbdev);
+
+       return ret;
+}
+
+static int bfin_adv7393_fb_open(struct fb_info *info, int user)
+{
+       struct adv7393fb_device *fbdev = to_adv7393fb_device(info);
+
+       fbdev->info.screen_base = (void *)fbdev->fb_mem;
+       if (!fbdev->info.screen_base) {
+               dev_err(&fbdev->client->dev, "unable to map device\n");
+               return -ENOMEM;
+       }
+
+       fbdev->open = 1;
+       dma_desc_list(fbdev, BUILD);
+       adv7393_mode(fbdev->client, BLANK_OFF);
+       bfin_config_ppi(fbdev);
+       bfin_config_dma(fbdev);
+       bfin_enable_ppi();
+
+       return 0;
+}
+
+static int bfin_adv7393_fb_release(struct fb_info *info, int user)
+{
+       struct adv7393fb_device *fbdev = to_adv7393fb_device(info);
+
+       adv7393_mode(fbdev->client, BLANK_ON);
+       bfin_disable_dma();
+       bfin_disable_ppi();
+       dma_desc_list(fbdev, DESTRUCT);
+       fbdev->open = 0;
+       return 0;
+}
+
+static int
+bfin_adv7393_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+
+       switch (var->bits_per_pixel) {
+       case 16:/* DIRECTCOLOUR, 64k */
+               var->red.offset = info->var.red.offset;
+               var->green.offset = info->var.green.offset;
+               var->blue.offset = info->var.blue.offset;
+               var->red.length = info->var.red.length;
+               var->green.length = info->var.green.length;
+               var->blue.length = info->var.blue.length;
+               var->transp.offset = 0;
+               var->transp.length = 0;
+               var->transp.msb_right = 0;
+               var->red.msb_right = 0;
+               var->green.msb_right = 0;
+               var->blue.msb_right = 0;
+               break;
+       default:
+               pr_debug("%s: depth not supported: %u BPP\n", __func__,
+                        var->bits_per_pixel);
+               return -EINVAL;
+       }
+
+       if (info->var.xres != var->xres ||
+           info->var.yres != var->yres ||
+           info->var.xres_virtual != var->xres_virtual ||
+           info->var.yres_virtual != var->yres_virtual) {
+               pr_debug("%s: Resolution not supported: X%u x Y%u\n",
+                        __func__, var->xres, var->yres);
+               return -EINVAL;
+       }
+
+       /*
+        *  Memory limit
+        */
+
+       if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
+               pr_debug("%s: Memory Limit requested yres_virtual = %u\n",
+                        __func__, var->yres_virtual);
+               return -ENOMEM;
+       }
+
+       return 0;
+}
+
+static int
+bfin_adv7393_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+       int dy;
+       u32 dmaaddr;
+       struct adv7393fb_device *fbdev = to_adv7393fb_device(info);
+
+       if (!var || !info)
+               return -EINVAL;
+
+       if (var->xoffset - info->var.xoffset) {
+               /* No support for X panning for now! */
+               return -EINVAL;
+       }
+       dy = var->yoffset - info->var.yoffset;
+
+       if (dy) {
+               pr_debug("%s: Panning screen of %d lines\n", __func__, dy);
+
+               dmaaddr = fbdev->av1->start_addr;
+               dmaaddr += (info->fix.line_length * dy);
+               /* TODO: Wait for current frame to finished */
+
+               fbdev->av1->start_addr = (unsigned long)dmaaddr;
+               fbdev->av2->start_addr = (unsigned long)dmaaddr + fbdev->line_len;
+       }
+
+       return 0;
+
+}
+
+/* 0 unblank, 1 blank, 2 no vsync, 3 no hsync, 4 off */
+static int bfin_adv7393_fb_blank(int blank, struct fb_info *info)
+{
+       struct adv7393fb_device *fbdev = to_adv7393fb_device(info);
+
+       switch (blank) {
+
+       case VESA_NO_BLANKING:
+               /* Turn on panel */
+               adv7393_mode(fbdev->client, BLANK_OFF);
+               break;
+
+       case VESA_VSYNC_SUSPEND:
+       case VESA_HSYNC_SUSPEND:
+       case VESA_POWERDOWN:
+               /* Turn off panel */
+               adv7393_mode(fbdev->client, BLANK_ON);
+               break;
+
+       default:
+               return -EINVAL;
+               break;
+       }
+       return 0;
+}
+
+int bfin_adv7393_fb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+       if (nocursor)
+               return 0;
+       else
+               return -EINVAL; /* just to force soft_cursor() call */
+}
+
+static int bfin_adv7393_fb_setcolreg(u_int regno, u_int red, u_int green,
+                                    u_int blue, u_int transp,
+                                    struct fb_info *info)
+{
+       if (regno >= BFIN_LCD_NBR_PALETTE_ENTRIES)
+               return -EINVAL;
+
+       if (info->var.grayscale)
+               /* grayscale = 0.30*R + 0.59*G + 0.11*B */
+               red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8;
+
+       if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+               u32 value;
+               /* Place color in the pseudopalette */
+               if (regno > 16)
+                       return -EINVAL;
+
+               red   >>= (16 - info->var.red.length);
+               green >>= (16 - info->var.green.length);
+               blue  >>= (16 - info->var.blue.length);
+
+               value = (red   << info->var.red.offset) |
+                       (green << info->var.green.offset)|
+                       (blue  << info->var.blue.offset);
+               value &= 0xFFFF;
+
+               ((u32 *) (info->pseudo_palette))[regno] = value;
+       }
+
+       return 0;
+}
+
+static int __devexit bfin_adv7393_fb_remove(struct i2c_client *client)
+{
+       struct adv7393fb_device *fbdev = i2c_get_clientdata(client);
+
+       adv7393_mode(client, POWER_DOWN);
+
+       if (fbdev->fb_mem)
+               dma_free_coherent(NULL, fbdev->fb_len, fbdev->fb_mem, fbdev->dma_handle);
+       free_dma(CH_PPI);
+       free_irq(IRQ_PPI_ERROR, fbdev);
+       unregister_framebuffer(&fbdev->info);
+       remove_proc_entry("driver/adv7393", NULL);
+       fb_dealloc_cmap(&fbdev->info.cmap);
+       kfree(fbdev->info.pseudo_palette);
+
+       if (ANOMALY_05000400)
+               gpio_free(P_IDENT(P_PPI0_FS3)); /* FS3 */
+       peripheral_free_list(ppi_pins);
+       kfree(fbdev);
+
+       return 0;
+}
+
+#ifdef CONFIG_PM
+static int bfin_adv7393_fb_suspend(struct device *dev)
+{
+       struct adv7393fb_device *fbdev = dev_get_drvdata(dev);
+
+       if (fbdev->open) {
+               bfin_disable_dma();
+               bfin_disable_ppi();
+               dma_desc_list(fbdev, DESTRUCT);
+       }
+       adv7393_mode(fbdev->client, POWER_DOWN);
+
+       return 0;
+}
+
+static int bfin_adv7393_fb_resume(struct device *dev)
+{
+       struct adv7393fb_device *fbdev = dev_get_drvdata(dev);
+
+       adv7393_mode(fbdev->client, POWER_ON);
+
+       if (fbdev->open) {
+               dma_desc_list(fbdev, BUILD);
+               bfin_config_ppi(fbdev);
+               bfin_config_dma(fbdev);
+               bfin_enable_ppi();
+       }
+
+       return 0;
+}
+
+static const struct dev_pm_ops bfin_adv7393_dev_pm_ops = {
+       .suspend = bfin_adv7393_fb_suspend,
+       .resume  = bfin_adv7393_fb_resume,
+};
+#endif
+
+static const struct i2c_device_id bfin_adv7393_id[] = {
+       {DRIVER_NAME, 0},
+       {}
+};
+
+MODULE_DEVICE_TABLE(i2c, bfin_adv7393_id);
+
+static struct i2c_driver bfin_adv7393_fb_driver = {
+       .driver = {
+               .name = DRIVER_NAME,
+#ifdef CONFIG_PM
+               .pm   = &bfin_adv7393_dev_pm_ops,
+#endif
+       },
+       .probe = bfin_adv7393_fb_probe,
+       .remove = __devexit_p(bfin_adv7393_fb_remove),
+       .id_table = bfin_adv7393_id,
+};
+
+static int __init bfin_adv7393_fb_driver_init(void)
+{
+#if  defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+       request_module("i2c-bfin-twi");
+#else
+       request_module("i2c-gpio");
+#endif
+
+       return i2c_add_driver(&bfin_adv7393_fb_driver);
+}
+module_init(bfin_adv7393_fb_driver_init);
+
+static void __exit bfin_adv7393_fb_driver_cleanup(void)
+{
+       i2c_del_driver(&bfin_adv7393_fb_driver);
+}
+module_exit(bfin_adv7393_fb_driver_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("Frame buffer driver for ADV7393/2 Video Encoder");
+
+module_param(mode, int, 0);
+MODULE_PARM_DESC(mode,
+       "Video Mode (0=NTSC,1=PAL,2=NTSC 640x480,3=PAL 640x480,4=NTSC YCbCr input,5=PAL YCbCr input)");
+
+module_param(mem, int, 0);
+MODULE_PARM_DESC(mem,
+       "Size of frame buffer memory 1=Single 2=Double Size (allows y-panning / frame stacking)");
+
+module_param(nocursor, int, 0644);
+MODULE_PARM_DESC(nocursor, "cursor enable/disable");
diff --git a/drivers/video/bfin_adv7393fb.h b/drivers/video/bfin_adv7393fb.h
new file mode 100644 (file)
index 0000000..8c7f9e4
--- /dev/null
@@ -0,0 +1,321 @@
+/*
+ * Frame buffer driver for ADV7393/2 video encoder
+ *
+ * Copyright 2006-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or late.
+ */
+
+#ifndef __BFIN_ADV7393FB_H__
+#define __BFIN_ADV7393FB_H__
+
+#define BFIN_LCD_NBR_PALETTE_ENTRIES   256
+
+#ifdef CONFIG_NTSC
+# define VMODE 0
+#endif
+#ifdef CONFIG_PAL
+# define VMODE 1
+#endif
+#ifdef CONFIG_NTSC_640x480
+# define VMODE 2
+#endif
+#ifdef CONFIG_PAL_640x480
+# define VMODE 3
+#endif
+#ifdef CONFIG_NTSC_YCBCR
+# define VMODE 4
+#endif
+#ifdef CONFIG_PAL_YCBCR
+# define VMODE 5
+#endif
+
+#ifndef VMODE
+# define VMODE 1
+#endif
+
+#ifdef CONFIG_ADV7393_2XMEM
+# define VMEM 2
+#else
+# define VMEM 1
+#endif
+
+#if defined(CONFIG_BF537) || defined(CONFIG_BF536) || defined(CONFIG_BF534)
+# define DMA_CFG_VAL   0x7935  /* Set Sync Bit */
+# define VB_DUMMY_MEMORY_SOURCE        L1_DATA_B_START
+#else
+# define DMA_CFG_VAL   0x7915
+# define VB_DUMMY_MEMORY_SOURCE        BOOT_ROM_START
+#endif
+
+enum {
+       DESTRUCT,
+       BUILD,
+};
+
+enum {
+       POWER_ON,
+       POWER_DOWN,
+       BLANK_ON,
+       BLANK_OFF,
+};
+
+#define DRIVER_NAME "bfin-adv7393"
+
+struct adv7393fb_modes {
+       const s8 name[25];      /* Full name */
+       u16 xres;               /* Active Horizonzal Pixels  */
+       u16 yres;               /* Active Vertical Pixels  */
+       u16 bpp;
+       u16 vmode;
+       u16 a_lines;            /* Active Lines per Field */
+       u16 vb1_lines;          /* Vertical Blanking Field 1 Lines */
+       u16 vb2_lines;          /* Vertical Blanking Field 2 Lines */
+       u16 tot_lines;          /* Total Lines per Frame */
+       u16 boeft_blank;        /* Before Odd/Even Field Transition No. of Blank Pixels */
+       u16 aoeft_blank;        /* After Odd/Even Field Transition No. of Blank Pixels */
+       const s8 *adv7393_i2c_initd;
+       u16 adv7393_i2c_initd_len;
+};
+
+static const u8 init_NTSC_TESTPATTERN[] = {
+       0x00, 0x1E,     /* Power up all DACs and PLL */
+       0x01, 0x00,     /* SD-Only Mode */
+       0x80, 0x10,     /* SSAF Luma Filter Enabled, NTSC Mode */
+       0x82, 0xCB,     /* Step control on, pixel data valid, pedestal on, PrPb SSAF on, CVBS/YC output */
+       0x84, 0x40,     /* SD Color Bar Test Pattern Enabled, DAC 2 = Luma, DAC 3 = Chroma */
+};
+
+static const u8 init_NTSC[] = {
+       0x00, 0x1E,     /* Power up all DACs and PLL */
+       0xC3, 0x26,     /* Program RGB->YCrCb Color Space convertion matrix */
+       0xC5, 0x12,     /* Program RGB->YCrCb Color Space convertion matrix */
+       0xC2, 0x4A,     /* Program RGB->YCrCb Color Space convertion matrix */
+       0xC6, 0x5E,     /* Program RGB->YCrCb Color Space convertion matrix */
+       0xBD, 0x19,     /* Program RGB->YCrCb Color Space convertion matrix */
+       0xBF, 0x42,     /* Program RGB->YCrCb Color Space convertion matrix */
+       0x8C, 0x1F,     /* NTSC Subcarrier Frequency */
+       0x8D, 0x7C,     /* NTSC Subcarrier Frequency */
+       0x8E, 0xF0,     /* NTSC Subcarrier Frequency */
+       0x8F, 0x21,     /* NTSC Subcarrier Frequency */
+       0x01, 0x00,     /* SD-Only Mode */
+       0x80, 0x30,     /* SSAF Luma Filter Enabled, NTSC Mode */
+       0x82, 0x8B,     /* Step control on, pixel data invalid, pedestal on, PrPb SSAF on, CVBS/YC output */
+       0x87, 0x80,     /* SD Color Bar Test Pattern Enabled, DAC 2 = Luma, DAC 3 = Chroma */
+       0x86, 0x82,
+       0x8B, 0x11,
+       0x88, 0x20,
+       0x8A, 0x0d,
+};
+
+static const u8 init_PAL[] = {
+       0x00, 0x1E,     /* Power up all DACs and PLL */
+       0xC3, 0x26,     /* Program RGB->YCrCb Color Space convertion matrix */
+       0xC5, 0x12,     /* Program RGB->YCrCb Color Space convertion matrix */
+       0xC2, 0x4A,     /* Program RGB->YCrCb Color Space convertion matrix */
+       0xC6, 0x5E,     /* Program RGB->YCrCb Color Space convertion matrix */
+       0xBD, 0x19,     /* Program RGB->YCrCb Color Space convertion matrix */
+       0xBF, 0x42,     /* Program RGB->YCrCb Color Space convertion matrix */
+       0x8C, 0xCB,     /* PAL Subcarrier Frequency */
+       0x8D, 0x8A,     /* PAL Subcarrier Frequency */
+       0x8E, 0x09,     /* PAL Subcarrier Frequency */
+       0x8F, 0x2A,     /* PAL Subcarrier Frequency */
+       0x01, 0x00,     /* SD-Only Mode */
+       0x80, 0x11,     /* SSAF Luma Filter Enabled, PAL Mode */
+       0x82, 0x8B,     /* Step control on, pixel data invalid, pedestal on, PrPb SSAF on, CVBS/YC output */
+       0x87, 0x80,     /* SD Color Bar Test Pattern Enabled, DAC 2 = Luma, DAC 3 = Chroma */
+       0x86, 0x82,
+       0x8B, 0x11,
+       0x88, 0x20,
+       0x8A, 0x0d,
+};
+
+static const u8 init_NTSC_YCbCr[] = {
+       0x00, 0x1E,     /* Power up all DACs and PLL */
+       0x8C, 0x1F,     /* NTSC Subcarrier Frequency */
+       0x8D, 0x7C,     /* NTSC Subcarrier Frequency */
+       0x8E, 0xF0,     /* NTSC Subcarrier Frequency */
+       0x8F, 0x21,     /* NTSC Subcarrier Frequency */
+       0x01, 0x00,     /* SD-Only Mode */
+       0x80, 0x30,     /* SSAF Luma Filter Enabled, NTSC Mode */
+       0x82, 0x8B,     /* Step control on, pixel data invalid, pedestal on, PrPb SSAF on, CVBS/YC output */
+       0x87, 0x00,     /* DAC 2 = Luma, DAC 3 = Chroma */
+       0x86, 0x82,
+       0x8B, 0x11,
+       0x88, 0x08,
+       0x8A, 0x0d,
+};
+
+static const u8 init_PAL_YCbCr[] = {
+       0x00, 0x1E,     /* Power up all DACs and PLL */
+       0x8C, 0xCB,     /* PAL Subcarrier Frequency */
+       0x8D, 0x8A,     /* PAL Subcarrier Frequency */
+       0x8E, 0x09,     /* PAL Subcarrier Frequency */
+       0x8F, 0x2A,     /* PAL Subcarrier Frequency */
+       0x01, 0x00,     /* SD-Only Mode */
+       0x80, 0x11,     /* SSAF Luma Filter Enabled, PAL Mode */
+       0x82, 0x8B,     /* Step control on, pixel data invalid, pedestal on, PrPb SSAF on, CVBS/YC output */
+       0x87, 0x00,     /* DAC 2 = Luma, DAC 3 = Chroma */
+       0x86, 0x82,
+       0x8B, 0x11,
+       0x88, 0x08,
+       0x8A, 0x0d,
+};
+
+static struct adv7393fb_modes known_modes[] = {
+       /* NTSC 720x480 CRT */
+       {
+               .name = "NTSC 720x480",
+               .xres = 720,
+               .yres = 480,
+               .bpp = 16,
+               .vmode = FB_VMODE_INTERLACED,
+               .a_lines = 240,
+               .vb1_lines = 22,
+               .vb2_lines = 23,
+               .tot_lines = 525,
+               .boeft_blank = 16,
+               .aoeft_blank = 122,
+               .adv7393_i2c_initd = init_NTSC,
+               .adv7393_i2c_initd_len = sizeof(init_NTSC)
+       },
+       /* PAL 720x480 CRT */
+       {
+               .name = "PAL 720x576",
+               .xres = 720,
+               .yres = 576,
+               .bpp = 16,
+               .vmode = FB_VMODE_INTERLACED,
+               .a_lines = 288,
+               .vb1_lines = 24,
+               .vb2_lines = 25,
+               .tot_lines = 625,
+               .boeft_blank = 12,
+               .aoeft_blank = 132,
+               .adv7393_i2c_initd = init_PAL,
+               .adv7393_i2c_initd_len = sizeof(init_PAL)
+       },
+       /* NTSC 640x480 CRT Experimental */
+       {
+               .name = "NTSC 640x480",
+               .xres = 640,
+               .yres = 480,
+               .bpp = 16,
+               .vmode = FB_VMODE_INTERLACED,
+               .a_lines = 240,
+               .vb1_lines = 22,
+               .vb2_lines = 23,
+               .tot_lines = 525,
+               .boeft_blank = 16 + 40,
+               .aoeft_blank = 122 + 40,
+               .adv7393_i2c_initd = init_NTSC,
+               .adv7393_i2c_initd_len = sizeof(init_NTSC)
+       },
+       /* PAL 640x480 CRT Experimental */
+       {
+               .name = "PAL 640x480",
+               .xres = 640,
+               .yres = 480,
+               .bpp = 16,
+               .vmode = FB_VMODE_INTERLACED,
+               .a_lines = 288 - 20,
+               .vb1_lines = 24 + 20,
+               .vb2_lines = 25 + 20,
+               .tot_lines = 625,
+               .boeft_blank = 12 + 40,
+               .aoeft_blank = 132 + 40,
+               .adv7393_i2c_initd = init_PAL,
+               .adv7393_i2c_initd_len = sizeof(init_PAL)
+       },
+       /* NTSC 720x480 YCbCR */
+       {
+               .name = "NTSC 720x480 YCbCR",
+               .xres = 720,
+               .yres = 480,
+               .bpp = 16,
+               .vmode = FB_VMODE_INTERLACED,
+               .a_lines = 240,
+               .vb1_lines = 22,
+               .vb2_lines = 23,
+               .tot_lines = 525,
+               .boeft_blank = 16,
+               .aoeft_blank = 122,
+               .adv7393_i2c_initd = init_NTSC_YCbCr,
+               .adv7393_i2c_initd_len = sizeof(init_NTSC_YCbCr)
+       },
+       /* PAL 720x480 CRT */
+       {
+               .name = "PAL 720x576 YCbCR",
+               .xres = 720,
+               .yres = 576,
+               .bpp = 16,
+               .vmode = FB_VMODE_INTERLACED,
+               .a_lines = 288,
+               .vb1_lines = 24,
+               .vb2_lines = 25,
+               .tot_lines = 625,
+               .boeft_blank = 12,
+               .aoeft_blank = 132,
+               .adv7393_i2c_initd = init_PAL_YCbCr,
+               .adv7393_i2c_initd_len = sizeof(init_PAL_YCbCr)
+       }
+};
+
+struct adv7393fb_regs {
+
+};
+
+struct adv7393fb_device {
+       struct fb_info info;    /* FB driver info record */
+
+       struct i2c_client *client;
+
+       struct dmasg *descriptor_list_head;
+       struct dmasg *vb1;
+       struct dmasg *av1;
+       struct dmasg *vb2;
+       struct dmasg *av2;
+
+       dma_addr_t dma_handle;
+
+       struct fb_info bfin_adv7393_fb;
+
+       struct adv7393fb_modes *modes;
+
+       struct adv7393fb_regs *regs;    /* Registers memory map */
+       size_t regs_len;
+       size_t fb_len;
+       size_t line_len;
+       u16 open;
+       u16 *fb_mem;            /* RGB Buffer */
+
+};
+
+#define to_adv7393fb_device(_info) \
+         (_info ? container_of(_info, struct adv7393fb_device, info) : NULL);
+
+static int bfin_adv7393_fb_open(struct fb_info *info, int user);
+static int bfin_adv7393_fb_release(struct fb_info *info, int user);
+static int bfin_adv7393_fb_check_var(struct fb_var_screeninfo *var,
+                                    struct fb_info *info);
+
+static int bfin_adv7393_fb_pan_display(struct fb_var_screeninfo *var,
+                                      struct fb_info *info);
+
+static int bfin_adv7393_fb_blank(int blank, struct fb_info *info);
+
+static void bfin_config_ppi(struct adv7393fb_device *fbdev);
+static int bfin_config_dma(struct adv7393fb_device *fbdev);
+static void bfin_disable_dma(void);
+static void bfin_enable_ppi(void);
+static void bfin_disable_ppi(void);
+
+static inline int adv7393_write(struct i2c_client *client, u8 reg, u8 value);
+static inline int adv7393_read(struct i2c_client *client, u8 reg);
+static int adv7393_write_block(struct i2c_client *client, const u8 *data,
+                              unsigned int len);
+
+int bfin_adv7393_fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
+static int bfin_adv7393_fb_setcolreg(u_int, u_int, u_int, u_int,
+                                    u_int, struct fb_info *info);
+
+#endif