regulator: dt-bindings: Drop unneeded quotes

Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230317233616.3968003-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
index 0a66338..1725037 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
@@ -10,7 +10,7 @@ maintainers:
   - Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
 
 properties:
   compatible:
@@ -19,43 +19,43 @@ properties:
   regulator-name: true
 
   anatop-reg-offset:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the anatop MFD register offset.
 
   anatop-vol-bit-shift:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the bit shift for the register.
 
   anatop-vol-bit-width:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the number of bits used in the register.
 
   anatop-min-bit-val:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the minimum value of this register.
 
   anatop-min-voltage:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the minimum voltage of this regulator.
 
   anatop-max-voltage:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the maximum voltage of this regulator.
 
   anatop-delay-reg-offset:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the anatop MFD step time register offset.
 
   anatop-delay-bit-shift:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the bit shift for the step time register.
 
   anatop-delay-bit-width:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing the number of bits used in the step time register.
 
   anatop-enable-bit:
-    $ref: '/schemas/types.yaml#/definitions/uint32'
+    $ref: /schemas/types.yaml#/definitions/uint32
     description: u32 value representing regulator enable bit offset.
 
   vin-supply:

diff --git a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
index 63e1161..dc62651 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
+++ b/Documentation/devicetree/bindings/regulator/dlg,da9121.yaml
@@ -109,7 +109,7 @@ properties:
             description: Specify a valid GPIO for platform control of the regulator
 
           dlg,ripple-cancel:
-            $ref: "/schemas/types.yaml#/definitions/uint32"
+            $ref: /schemas/types.yaml#/definitions/uint32
             enum: [ 0, 1, 2, 3 ]
             description: |
               Defined in include/dt-bindings/regulator/dlg,da9121-regulator.h

diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
index 48af7cb..ac0281b 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -17,7 +17,7 @@ description:
   to be the same.
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
   - if:
       properties:
         compatible:

diff --git a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
index 0921f01..e0ff501 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml
@@ -14,7 +14,7 @@ description:
   regulator.yaml, can also be used.
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
 
 properties:
   compatible:

diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
index 6c3371d..f4c1f36 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml
@@ -15,7 +15,7 @@ description:
   regulator.txt, can also be used.
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
 
 properties:
   compatible:

diff --git a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
index 01b9775..27d5e9c 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/max77650-regulator.yaml
@@ -25,7 +25,7 @@ properties:
 
 patternProperties:
   "^regulator-(ldo|sbb[0-2])$":
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
     unevaluatedProperties: false
 
 required:

diff --git a/Documentation/devicetree/bindings/regulator/max8660.yaml b/Documentation/devicetree/bindings/regulator/max8660.yaml
index 35792a9..f05f464 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/max8660.yaml
+++ b/Documentation/devicetree/bindings/regulator/max8660.yaml
@@ -25,7 +25,7 @@ properties:
 
     patternProperties:
       "^regulator-.+$":
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
         unevaluatedProperties: false
 
     additionalProperties: false

diff --git a/Documentation/devicetree/bindings/regulator/max8893.yaml b/Documentation/devicetree/bindings/regulator/max8893.yaml
index 2b5e977..e40ee79 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/max8893.yaml
+++ b/Documentation/devicetree/bindings/regulator/max8893.yaml
@@ -25,7 +25,7 @@ properties:
 
     patternProperties:
       "^(ldo[1-5]|buck)$":
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
 
     additionalProperties: false
 

diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
index 771cc13..79e5198 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6331-regulator.yaml
@@ -18,7 +18,7 @@ description: |
 patternProperties:
   "^buck-v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -28,7 +28,7 @@ patternProperties:
 
   "^ldo-v(avdd32aud|auxa32)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -38,7 +38,7 @@ patternProperties:
 
   "^ldo-v(dig18|emc33|ibr|mc|mch|mipi|rtc|sram|usb10)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -48,7 +48,7 @@ patternProperties:
 
   "^ldo-vcam(a|af|d|io)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -58,7 +58,7 @@ patternProperties:
 
   "^ldo-vtcxo[12]$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -71,7 +71,7 @@ patternProperties:
 
   "^ldo-vgp[1234]$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:

diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
index 3218f43..2eb512c 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6332-regulator.yaml
@@ -18,7 +18,7 @@ description: |
 patternProperties:
   "^buck-v(dram|dvfs2|pa|rf18a|rf18b|sbst)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -28,7 +28,7 @@ patternProperties:
 
   "^ldo-v(bif28|dig18|sram|usb33)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:

diff --git a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
index 7023c59..2e720d1 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mp5416.yaml
@@ -28,11 +28,11 @@ properties:
 
     patternProperties:
       "^buck[1-4]$":
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
         type: object
 
       "^ldo[1-4]$":
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
         type: object
 
     additionalProperties: false

diff --git a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
index 9245b71..374a4f6 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mp886x.yaml
@@ -28,7 +28,7 @@ properties:
   mps,fb-voltage-divider:
     description: An array of two integers containing the resistor
       values R1 and R2 of the feedback voltage divider in kilo ohms.
-    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    $ref: /schemas/types.yaml#/definitions/uint32-array
     maxItems: 2
 
   mps,switch-frequency-hz:

diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
index c2e8c54..f3fcfc8 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@@ -29,7 +29,7 @@ properties:
 
     properties:
       mps,switch-freq:
-        $ref: "/schemas/types.yaml#/definitions/uint8"
+        $ref: /schemas/types.yaml#/definitions/uint8
         enum: [0, 1, 2, 3]
         default: 2
         description: |
@@ -51,14 +51,14 @@ properties:
 
         properties:
           mps,buck-softstart:
-            $ref: "/schemas/types.yaml#/definitions/uint8"
+            $ref: /schemas/types.yaml#/definitions/uint8
             enum: [0, 1, 2, 3]
             description: |
               defines the soft start time of this buck, must be one of the following
               corresponding values 150us, 300us, 610us, 920us
 
           mps,buck-phase-delay:
-            $ref: "/schemas/types.yaml#/definitions/uint8"
+            $ref: /schemas/types.yaml#/definitions/uint8
             enum: [0, 1, 2, 3]
             description: |
               defines the phase delay of this buck, must be one of the following

diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
index 364b587..6317daf 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -28,7 +28,7 @@ properties:
     patternProperties:
       "^vbuck[1-4]$":
         type: object
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
         unevaluatedProperties: false
 
         properties:

diff --git a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
index 8cc413e..d6b3b5a 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mt6359-regulator.yaml
@@ -17,7 +17,7 @@ description: |
 patternProperties:
   "^buck_v(s1|gpu11|modem|pu|core|s2|pa|proc2|proc1|core_sshub)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -27,7 +27,7 @@ patternProperties:
 
   "^ldo_v(ibr|rf12|usb|camio|efuse|xo22)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -37,7 +37,7 @@ patternProperties:
 
   "^ldo_v(rfck|emc|a12|a09|ufs|bbck)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -47,7 +47,7 @@ patternProperties:
 
   "^ldo_vcn(18|13|33_1_bt|13_1_wifi|33_2_bt|33_2_wifi)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -57,7 +57,7 @@ patternProperties:
 
   "^ldo_vsram_(proc2|others|md|proc1|others_sshub)$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -67,7 +67,7 @@ patternProperties:
 
   "^ldo_v(fe|bif|io)28$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -77,7 +77,7 @@ patternProperties:
 
   "^ldo_v(aud|io|aux|rf|m)18$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:
@@ -87,7 +87,7 @@ patternProperties:
 
   "^ldo_vsim[12]$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       regulator-name:

diff --git a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
index 8a0931d..9c879bc 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/mt6360-regulator.yaml
@@ -26,11 +26,11 @@ properties:
 
 patternProperties:
   "^buck[12]$":
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
     unevaluatedProperties: false
 
   "^ldo[123567]$":
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
     unevaluatedProperties: false
 
 required:

diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
index 835b533..d2383e5 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -57,7 +57,7 @@ properties:
 
         properties:
           nxp,dvs-run-voltage:
-            $ref: "/schemas/types.yaml#/definitions/uint32"
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 600000
             maximum: 2187500
             description:
@@ -65,7 +65,7 @@ properties:
               dvs(dynamic voltage scaling) property.
 
           nxp,dvs-standby-voltage:
-            $ref: "/schemas/types.yaml#/definitions/uint32"
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 600000
             maximum: 2187500
             description:

diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
index aabf50f..8c0f37d 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
@@ -59,7 +59,7 @@ properties:
               should be "buck1", ..., "buck7"
 
           nxp,ilim-ma:
-            $ref: "/schemas/types.yaml#/definitions/uint32"
+            $ref: /schemas/types.yaml#/definitions/uint32
             minimum: 2100
             maximum: 4500
             deprecated: true
@@ -75,7 +75,7 @@ properties:
               4500
 
           nxp,phase-shift:
-            $ref: "/schemas/types.yaml#/definitions/uint32"
+            $ref: /schemas/types.yaml#/definitions/uint32
             default: 0
             enum: [ 0, 45, 90, 135, 180, 225, 270, 315 ]
             description:

diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.yaml b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
index a26bbd6..67a30b2 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/pfuze100.yaml
+++ b/Documentation/devicetree/bindings/regulator/pfuze100.yaml
@@ -63,19 +63,19 @@ properties:
 
     patternProperties:
       "^sw([1-4]|[1-4][a-c]|[1-4][a-c][a-c])$":
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
         type: object
 
       "^vgen[1-6]$":
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
         type: object
 
       "^vldo[1-4]$":
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
         type: object
 
       "^(vsnvs|vref|vrefddr|swbst|coin|v33|vccsd)$":
-        $ref: "regulator.yaml#"
+        $ref: regulator.yaml#
         type: object
 
     additionalProperties: false

diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index 297a750..a765837 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -105,18 +105,18 @@ properties:
 
   bob:
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
     description: BOB regulator node.
     dependencies:
-      regulator-allow-set-load: ["regulator-allowed-modes"]
+      regulator-allow-set-load: [ regulator-allowed-modes ]
 
 patternProperties:
   "^(smps|ldo|lvs|bob)[0-9]+$":
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
     description: smps/ldo regulator nodes(s).
     dependencies:
-      regulator-allow-set-load: ["regulator-allowed-modes"]
+      regulator-allow-set-load: [ regulator-allowed-modes ]
 
 required:
   - compatible

diff --git a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
index 0ae25d1..4167840 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/raspberrypi,7inch-touchscreen-panel-regulator.yaml
@@ -15,7 +15,7 @@ description: |
   and control the backlight.
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
 
 properties:
   compatible:

diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml
index 53b81d8..e158c2d 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/regulator.yaml
@@ -13,7 +13,7 @@ maintainers:
 properties:
   regulator-name:
     description: A string used as a descriptive name for regulator outputs
-    $ref: "/schemas/types.yaml#/definitions/string"
+    $ref: /schemas/types.yaml#/definitions/string
 
   regulator-min-microvolt:
     description: smallest voltage consumers may set
@@ -23,7 +23,7 @@ properties:
 
   regulator-microvolt-offset:
     description: Offset applied to voltages to compensate for voltage drops
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   regulator-min-microamp:
     description: smallest current consumers may set
@@ -59,7 +59,7 @@ properties:
     description: ramp delay for regulator(in uV/us) For hardware which supports
       disabling ramp rate, it should be explicitly initialised to zero (regulator-ramp-delay
       = <0>) for disabling ramp delay.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   regulator-enable-ramp-delay:
     description: The time taken, in microseconds, for the supply rail to
@@ -68,7 +68,7 @@ properties:
       required due to the combination of internal ramping of the regulator
       itself, and board design issues such as trace capacitance and load
       on the supply.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   regulator-settling-time-us:
     description: Settling time, in microseconds, for voltage change if regulator
@@ -95,7 +95,7 @@ properties:
     description: initial operating mode. The set of possible operating modes
       depends on the capabilities of every hardware so each device binding
       documentation explains which values the regulator supports.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   regulator-allowed-modes:
     description: list of operating modes that software is allowed to configure
@@ -103,12 +103,12 @@ properties:
       The set of possible operating modes depends on the capabilities of
       every hardware so each device binding document explains which values
       the regulator supports.
-    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   regulator-system-load:
     description: Load in uA present on regulator that is not captured by
       any consumer request.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
 
   regulator-pull-down:
     description: Enable pull down resistor when the regulator is disabled.
@@ -206,14 +206,14 @@ properties:
       0: Disable active discharge.
       1: Enable active discharge.
       Absence of this property will leave configuration to default.
-    $ref: "/schemas/types.yaml#/definitions/uint32"
+    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [0, 1]
 
   regulator-coupled-with:
     description: Regulators with which the regulator is coupled. The linkage
       is 2-way - all coupled regulators should be linked with each other.
       A regulator should not be coupled with its supplier.
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     items:
       maxItems: 1
 
@@ -221,7 +221,7 @@ properties:
     description: Array of maximum spread between voltages of coupled regulators
       in microvolts, each value in the array relates to the corresponding
       couple specified by the regulator-coupled-with property.
-    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    $ref: /schemas/types.yaml#/definitions/uint32-array
 
   regulator-max-step-microvolt:
     description: Maximum difference between current and target voltages
@@ -269,7 +269,7 @@ patternProperties:
           of possible operating modes depends on the capabilities of every
           hardware so the valid modes are documented on each regulator device
           tree binding document.
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
 
     additionalProperties: false
 

diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
index e983d0e..b73762e 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
@@ -32,7 +32,7 @@ properties:
     maxItems: 1
 
   richtek,oc-level-select:
-    $ref: "/schemas/types.yaml#/definitions/uint8"
+    $ref: /schemas/types.yaml#/definitions/uint8
     enum: [0, 1, 2, 3]
     description: |
       Over current level selection. Each respective value means the current
@@ -40,7 +40,7 @@ properties:
       in chip default.
 
   richtek,ot-level-select:
-    $ref: "/schemas/types.yaml#/definitions/uint8"
+    $ref: /schemas/types.yaml#/definitions/uint8
     enum: [0, 1, 2]
     description: |
       Over temperature level selection. Each respective value means the degree
@@ -48,7 +48,7 @@ properties:
       default.
 
   richtek,pgdly-time-select:
-    $ref: "/schemas/types.yaml#/definitions/uint8"
+    $ref: /schemas/types.yaml#/definitions/uint8
     enum: [0, 1, 2, 3]
     description: |
       Power good signal delay time selection. Each respective value means the
@@ -57,7 +57,7 @@ properties:
 
 
   richtek,switch-freq-select:
-    $ref: "/schemas/types.yaml#/definitions/uint8"
+    $ref: /schemas/types.yaml#/definitions/uint8
     enum: [0, 1, 2]
     description: |
       Buck switch frequency selection. Each respective value means 400KHz,

diff --git a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml
index a8ccb5c..446ec51 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rtmv20-regulator.yaml
@@ -120,7 +120,7 @@ properties:
   lsw:
     description: load switch current regulator description.
     type: object
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
 required:
   - compatible

diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
index 027fab3..cc4ceb3 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml
@@ -56,7 +56,7 @@ patternProperties:
           PMIC "RUN" state voltage in uV when PMIC HW states are used. See
           comments below for bucks/LDOs which support this. 0 means
           regulator should be disabled at RUN state.
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3300000
 
@@ -67,7 +67,7 @@ patternProperties:
           keeps regulator enabled. BD71815 does not change voltage level
           when PMIC transitions to SNVS.SNVS voltage depends on the previous
           state (from which the PMIC transitioned to SNVS).
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3300000
 
@@ -76,7 +76,7 @@ patternProperties:
           PMIC "SUSPEND" state voltage in uV when PMIC HW states are used. See
           comments below for bucks/LDOs which support this. 0 means
           regulator should be disabled at SUSPEND state.
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3300000
 
@@ -85,7 +85,7 @@ patternProperties:
           PMIC "LPSR" state voltage in uV when PMIC HW states are used. See
           comments below for bucks/LDOs which support this. 0 means
           regulator should be disabled at LPSR state.
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3300000
 

diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
index 3cbe3b7..19b253c 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
@@ -52,7 +52,7 @@ patternProperties:
         description:
           PMIC default "RUN" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3300000
 
@@ -60,7 +60,7 @@ patternProperties:
         description:
           PMIC default "IDLE" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3300000
 
@@ -68,7 +68,7 @@ patternProperties:
         description:
           PMIC default "SUSPEND" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3300000
 
@@ -76,7 +76,7 @@ patternProperties:
         description:
           PMIC default "LPSR" state voltage in uV. See below table for
           bucks which support this. 0 means disabled.
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 3300000
 

diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
index ab84281..6e693fe 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.yaml
@@ -55,7 +55,7 @@ patternProperties:
           should be "buck1", ..., "buck8"
 
       rohm,dvs-run-voltage:
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1300000
         description:
@@ -63,7 +63,7 @@ patternProperties:
           bucks which support this. 0 means disabled.
 
       rohm,dvs-idle-voltage:
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1300000
         description:
@@ -71,7 +71,7 @@ patternProperties:
           bucks which support this. 0 means disabled.
 
       rohm,dvs-suspend-voltage:
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1300000
         description:

diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
index 65fc3d1..1d3dcfb 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71847-regulator.yaml
@@ -54,7 +54,7 @@ patternProperties:
           should be "buck1", ..., "buck6"
 
       rohm,dvs-run-voltage:
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1300000
         description:
@@ -62,7 +62,7 @@ patternProperties:
           bucks which support this. 0 means disabled.
 
       rohm,dvs-idle-voltage:
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1300000
         description:
@@ -70,7 +70,7 @@ patternProperties:
           bucks which support this. 0 means disabled.
 
       rohm,dvs-suspend-voltage:
-        $ref: "/schemas/types.yaml#/definitions/uint32"
+        $ref: /schemas/types.yaml#/definitions/uint32
         minimum: 0
         maximum: 1300000
         description:

diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
index 89b8592..f573128 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
@@ -25,7 +25,7 @@ patternProperties:
     type: object
     description:
       Properties for single regulator.
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
     properties:
       rohm,ocw-fet-ron-micro-ohms:

diff --git a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
index a6949a5..ddaa112 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/socionext,uniphier-regulator.yaml
@@ -42,7 +42,7 @@ properties:
   reset-names: true
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
   - if:
       properties:
         compatible:

diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
index c82f6f8..c863100 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
@@ -14,7 +14,7 @@ description: |
   to supply ADC analog input switches.
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
 
 properties:
   compatible:
@@ -23,7 +23,7 @@ properties:
       - st,stm32mp1-booster
 
   st,syscfg:
-    $ref: "/schemas/types.yaml#/definitions/phandle"
+    $ref: /schemas/types.yaml#/definitions/phandle
     description: phandle to system configuration controller.
 
   vdda-supply:

diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
index c1bf1f9..05f4ad2 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
@@ -15,7 +15,7 @@ maintainers:
   - Fabrice Gasnier <fabrice.gasnier@foss.st.com>
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
 
 properties:
   compatible:

diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
index bd07b9c..7d53cfa 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
@@ -26,7 +26,7 @@ patternProperties:
   "^(reg11|reg18|usb33)$":
     type: object
 
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
 
 required:
   - compatible

diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
index 12aedde..90c3927 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
+++ b/Documentation/devicetree/bindings/regulator/ti,tps62360.yaml
@@ -19,7 +19,7 @@ description: |
   https://www.ti.com/lit/gpn/tps62360
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
 
 properties:
   compatible:

diff --git a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
index dd7a2f9..3b16a25 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/vqmmc-ipq4019-regulator.yaml
@@ -15,7 +15,7 @@ description: |
   controller is also embedded.
 
 allOf:
-  - $ref: "regulator.yaml#"
+  - $ref: regulator.yaml#
 
 properties:
   compatible:

diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
index 7b4ae5d..011819c 100644 (file)
--- a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
+++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
@@ -21,19 +21,19 @@ properties:
   wlf,ldoena:
     description:
       GPIO specifier for the GPIO controlling LDOENA.
-    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    $ref: /schemas/types.yaml#/definitions/phandle-array
     maxItems: 1
 
   ldo1:
     description:
       Initial data for the LDO1 regulator.
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
     type: object
 
   micvdd:
     description:
       Initial data for the MICVDD regulator.
-    $ref: "regulator.yaml#"
+    $ref: regulator.yaml#
     type: object
 
 additionalProperties: true