scsi: Documentation: Correct spelling

Correct spelling problems for Documentation/scsi/ as reported by codespell.

Link: https://lore.kernel.org/r/20230129231053.20863-8-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

diff --git a/Documentation/scsi/ncr53c8xx.rst b/Documentation/scsi/ncr53c8xx.rst
index c41cec99f07c7761b44f91d9bff0cc98b569abcd..1c79e08ec96497342bf4ffe1cc5e5ffd14e5c07e 100644 (file)
--- a/Documentation/scsi/ncr53c8xx.rst
+++ b/Documentation/scsi/ncr53c8xx.rst
@@ -906,7 +906,7 @@ burst:#x   burst enabled (1<<#x burst transfers max)
         led:0      disable LED support
         =====      ===================
 
-  Donnot enable LED support if your scsi board does not use SDMS BIOS.
+  Do not enable LED support if your scsi board does not use SDMS BIOS.
   (See 'Configuration parameters')
 
 10.2.13 Max wide
@@ -1222,7 +1222,7 @@ Unfortunately, the following common SCSI BUS problems are not detected:
 - Bad quality terminators.
 
 On the other hand, either bad cabling, broken devices, not conformant
-devices, ... may cause a SCSI signal to be wrong when te driver reads it.
+devices, ... may cause a SCSI signal to be wrong when the driver reads it.
 
 10.7 IMMEDIATE ARBITRATION boot option
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

diff --git a/Documentation/scsi/sym53c8xx_2.rst b/Documentation/scsi/sym53c8xx_2.rst
index 8de44a7baa9b37ce53d8659e79969ce6c7bb02e6..004f1a750e7d5166200a54f0567cc7335728059c 100644 (file)
--- a/Documentation/scsi/sym53c8xx_2.rst
+++ b/Documentation/scsi/sym53c8xx_2.rst
@@ -703,7 +703,7 @@ Unfortunately, the following common SCSI BUS problems are not detected:
 - Bad quality terminators.
 
 On the other hand, either bad cabling, broken devices, not conformant
-devices, ... may cause a SCSI signal to be wrong when te driver reads it.
+devices, ... may cause a SCSI signal to be wrong when the driver reads it.
 
 15. SCSI problem troubleshooting
 ================================

diff --git a/Documentation/scsi/tcm_qla2xxx.rst b/Documentation/scsi/tcm_qla2xxx.rst
index 91bc1fcd369e253015b23e33fcde6abb33b4241e..7268c2771e8fb98f1dd6c78624fb324c669905ad 100644 (file)
--- a/Documentation/scsi/tcm_qla2xxx.rst
+++ b/Documentation/scsi/tcm_qla2xxx.rst
@@ -6,7 +6,7 @@ tcm_qla2xxx Driver Notes
 
 tcm_qla2xxx jam_host attribute
 ------------------------------
-There is now a new module endpoint atribute called jam_host
+There is now a new module endpoint attribute called jam_host
 attribute::
 
        jam_host: boolean=0/1

diff --git a/Documentation/scsi/ufs.rst b/Documentation/scsi/ufs.rst
index 885b1a736e3f3cb20fcc65ece7d73697288b81bd..a7b2b2ed1c3ae953520154aa20ae2f05da6cb62a 100644 (file)
--- a/Documentation/scsi/ufs.rst
+++ b/Documentation/scsi/ufs.rst
@@ -206,5 +206,5 @@ Device-Specific Data property named "ref-clk-freq". In both ways the value
 is interpreted as frequency in Hz and must match one of the values given in
 the UFS specification. UFS subsystem will attempt to read the value when
 executing common controller initialization. If the value is available, UFS
-subsytem will ensure the bRefClkFreq attribute of the UFS storage device is
+subsystem will ensure the bRefClkFreq attribute of the UFS storage device is
 set accordingly and will modify it if there is a mismatch.