V4L/DVB (10033): m5602: add some comments
authorErik Andrén <erik.andren@gmail.com>
Fri, 19 Dec 2008 16:12:04 +0000 (13:12 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Tue, 30 Dec 2008 11:40:00 +0000 (09:40 -0200)
Signed-off-by: Erik Andrén <erik.andren@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/gspca/m5602/m5602_mt9m111.h
drivers/media/video/gspca/m5602/m5602_ov9650.h

index c5f75aa..e795ab7 100644 (file)
@@ -993,7 +993,7 @@ static const unsigned char init_mt9m111[][4] =
        {BRIDGE, M5602_XB_SIG_INI, 0x02, 0x00},
        {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
        {BRIDGE, M5602_XB_HSYNC_PARA, 0x00, 0x00},
-       {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00},
+       {BRIDGE, M5602_XB_HSYNC_PARA, 0x02, 0x00}, /* 639*/
        {BRIDGE, M5602_XB_HSYNC_PARA, 0x7f, 0x00},
        {BRIDGE, M5602_XB_SIG_INI, 0x00, 0x00},
        {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00, 0x00},
index 3435a05..b1aec70 100644 (file)
@@ -344,7 +344,7 @@ static const unsigned char init_ov9650[][3] =
        {SENSOR, OV9650_COM24, 0x00},
        /* Enable HREF and some out of spec things */
        {SENSOR, OV9650_COM12, 0x73},
-               /* Set all DBLC offset signs to positive and
+       /* Set all DBLC offset signs to positive and
        do some out of spec stuff */
        {SENSOR, OV9650_DBLC1, 0xdf},
        {SENSOR, OV9650_COM21, 0x06},
@@ -356,7 +356,7 @@ static const unsigned char init_ov9650[][3] =
        {SENSOR, OV9650_RSVD96, 0x04},
        /* Enable full range output */
        {SENSOR, OV9650_COM15, 0x0},
-               /* Enable HREF at optical black, enable ADBLC bias,
+       /* Enable HREF at optical black, enable ADBLC bias,
        enable ADBLC, reset timings at format change */
        {SENSOR, OV9650_COM6, 0x4b},
        /* Subtract 32 from the B channel bias */
@@ -377,7 +377,7 @@ static const unsigned char init_ov9650[][3] =
        {SENSOR, OV9650_AEB, 0x5c},
        /* Set the high and low limit nibbles to 3 */
        {SENSOR, OV9650_VPT, 0xc3},
-               /* Set the Automatic Gain Ceiling (AGC) to 128x,
+       /* Set the Automatic Gain Ceiling (AGC) to 128x,
        drop VSYNC at frame drop,
        limit exposure timing,
        drop frame when the AEC step is larger than the exposure gap */
@@ -386,9 +386,9 @@ static const unsigned char init_ov9650[][3] =
        and set PWDN to SLVS (slave mode vertical sync) */
        {SENSOR, OV9650_COM10, 0x42},
        /* Set horizontal column start high to default value */
-       {SENSOR, OV9650_HSTART, 0x1a},
+       {SENSOR, OV9650_HSTART, 0x1a}, /* 210 */
        /* Set horizontal column end */
-       {SENSOR, OV9650_HSTOP, 0xbf},
+       {SENSOR, OV9650_HSTOP, 0xbf}, /* 1534 */
        /* Complementing register to the two writes above */
        {SENSOR, OV9650_HREF, 0xb2},
        /* Set vertical row start high bits */
@@ -428,11 +428,12 @@ static const unsigned char init_ov9650[][3] =
        {BRIDGE, M5602_XB_VSYNC_PARA, 0x09},
        {BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
        {BRIDGE, M5602_XB_VSYNC_PARA, 0x01},
-       {BRIDGE, M5602_XB_VSYNC_PARA, 0xe0},
+       {BRIDGE, M5602_XB_VSYNC_PARA, 0xe0}, /* 480 */
+       {BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
        {BRIDGE, M5602_XB_VSYNC_PARA, 0x00},
        {BRIDGE, M5602_XB_HSYNC_PARA, 0x00},
-       {BRIDGE, M5602_XB_HSYNC_PARA, 0x5e},
-       {BRIDGE, M5602_XB_HSYNC_PARA, 0x02},
+       {BRIDGE, M5602_XB_HSYNC_PARA, 0x5e}, /* 94 */
+       {BRIDGE, M5602_XB_HSYNC_PARA, 0x02}, /* 734 */
        {BRIDGE, M5602_XB_HSYNC_PARA, 0xde}
 };