MIPS: BMIPS: Add SATA/PHY nodes for bcm7425

Add AHCI and PHY device nodes to MIPS-based BCM7425 set-top box
platform.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: Dragan Stancevic <dragan.stancevic@gmail.com>
Cc: linux-ide@vger.kernel.org
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11377/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi
index 5b660b6..e24d41a 100644 (file)
--- a/arch/mips/boot/dts/brcm/bcm7425.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi
@@ -221,5 +221,47 @@
                        interrupts = <73>;
                        status = "disabled";
                };
+
+               sata: sata@181000 {
+                       compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
+                       reg-names = "ahci", "top-ctrl";
+                       reg = <0x181000 0xa9c>, <0x180020 0x1c>;
+                       interrupt-parent = <&periph_intc>;
+                       interrupts = <40>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       brcm,broken-ncq;
+                       brcm,broken-phy;
+                       status = "disabled";
+
+                       sata0: sata-port@0 {
+                               reg = <0>;
+                               phys = <&sata_phy0>;
+                       };
+
+                       sata1: sata-port@1 {
+                               reg = <1>;
+                               phys = <&sata_phy1>;
+                       };
+               };
+
+               sata_phy: sata-phy@1800000 {
+                       compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
+                       reg = <0x180100 0x0eff>;
+                       reg-names = "phy";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+
+                       sata_phy0: sata-phy@0 {
+                               reg = <0>;
+                               #phy-cells = <0>;
+                       };
+
+                       sata_phy1: sata-phy@1 {
+                               reg = <1>;
+                               #phy-cells = <0>;
+                       };
+               };
        };
 };