+=== release 1.6.1 ===
+
+2015-10-30 Sebastian Dröge <slomo@coaxion.net>
+
+ * configure.ac:
+ releasing 1.6.1
+
+2015-10-30 14:09:00 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/cs.po:
+ * po/de.po:
+ * po/nl.po:
+ * po/pl.po:
+ * po/ru.po:
+ * po/uk.po:
+ * po/vi.po:
+ * po/zh_CN.po:
+ po: Update translations
+
+2015-10-28 18:04:46 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstpad.c:
+ pad: Unblock blocking pad probes when receiving FLUSH_START in send_event() too
+ Without this, flushing might not unblock the streaming thread and cause deadlocks.
+ https://bugzilla.gnome.org/show_bug.cgi?id=757257
+
+2015-10-24 16:43:59 +0100 Florin Apostol <florin.apostol@oregan.net>
+
+ * tests/check/gst/gsturi.c:
+ uri: tests: added unit test for streams ending in .. without following /
+ https://bugzilla.gnome.org/show_bug.cgi?id=757065
+
+2015-10-19 16:50:51 +0300 Vivia Nikolaidou <vivia@ahiru.eu>
+
+ * gst/gstsegment.c:
+ * tests/check/gst/gstsegment.c:
+ segment: Correct stream_time calc for negative applied rate
+ Updated gst_segment_position_from_stream_time and gst_segment_to_stream_time to reflect correct calculations for the case when the applied rate is negative.
+ Pasting from design docs:
+ ===============================
+ Stream time is calculated using the buffer times and the preceding SEGMENT
+ event as follows:
+ stream_time = (B.timestamp - S.start) * ABS (S.applied_rate) + S.time
+ For negative rates, B.timestamp will go backwards from S.stop to S.start,
+ making the stream time go backwards.
+ ===============================
+ Therefore, the calculation for applied_rate < 0 should be:
+ stream_time = (S.stop - B.timestamp) * ABS (S.applied_rate) + S.time
+ and the reverse:
+ B.timestamp = S.stop - (stream_time - S.time) / ABS (S.applied_rate)
+ https://bugzilla.gnome.org/show_bug.cgi?id=756810
+
+2015-09-25 15:57:16 +0300 Vivia Nikolaidou <vivia@toolsonair.com>
+
+ * gst/gstsegment.c:
+ segment: gst_segment_to_stream_time: Renamed 'result' to 'stream_time'
+ Renamed the "result" variable to "stream_time" for better readability.
+
+2015-10-24 16:52:44 +0100 Florin Apostol <florin.apostol@oregan.net>
+
+ * gst/gsturi.c:
+ uri: fix behaviour for merging uris ending in .. without following /
+ https://bugzilla.gnome.org/show_bug.cgi?id=757065
+
+2015-10-21 14:49:49 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstpad.c:
+ pad: Fix docs/annotation of gst_pad_probe_info_get_buffer_list()
+ It's not get_bufferlist(). Because of that it was ignored by the docs and
+ G-I, leading to crashes because of broken ownership transfer.
+ https://bugzilla.gnome.org/show_bug.cgi?id=756898
+
+2015-10-17 22:13:08 +0300 Sebastian Dröge <sebastian@centricular.com>
+
+ * gst/gstbin.c:
+ bin: Make sure to free all cached messages when going to NULL
+ An ASYNC READY->PAUSED might have failed without the bin code noticing during
+ the state change, in which case we will never get PAUSED->READY and would leak
+ messages.
+ https://bugzilla.gnome.org/show_bug.cgi?id=756611
+
+2015-10-15 16:32:42 +0200 Edward Hervey <edward@centricular.com>
+
+ * plugins/elements/gstmultiqueue.c:
+ multiqueue: Improve incoming SEGMENT handling
+ Previously this code was just blindly setting the cached flow return
+ of downstream to GST_FLOW_OK when we get a SEGMENT.
+ The problem is that this can not be done blindly. If downstream was
+ not linked, the corresponding sinqlequeue source pad thread might be
+ waiting for the next ID to be woken up upon.
+ By blindly setting the cached return value to GST_FLOW_OK, and if that
+ stream was the only one that was NOT_LINKED, then the next time we
+ check (from any other thread) to see if we need to wake up a source pad
+ thread ... we won't even try, because none of the cached flow return
+ are equal to GST_FLOW_NOT_LINKED.
+ This would result in that thread never being woken up
+ https://bugzilla.gnome.org/show_bug.cgi?id=756645
+
+2015-10-12 17:29:26 +0200 Edward Hervey <edward@centricular.com>
+
+ * libs/gst/base/gstbaseparse.c:
+ baseparse: Update internal position even if not linked
+ Our current position has nothing to do with being linked or not.
+ Avoids having stray segment updates fired every 2s
+
+2015-10-05 21:29:49 +0200 Stefan Sauer <ensonic@users.sf.net>
+
+ * tests/check/gst/gsttag.c:
+ tests: fix the tag test
+ The previous change (see bgo #756069) was causing us to free the same pointer
+ multiple times. If we actually get a sample back, the test fails, no need to
+ free anything in that case.
+
+2015-10-05 11:12:47 +0900 Vineeth TM <vineeth.tm@samsung.com>
+
+ * tests/check/gst/gsttag.c:
+ * tools/gst-launch.c:
+ tests/gst-launch: Fix sample memory leak
+ When sample is got using gst_tag_list_get_sample_index, it should
+ be free'd.
+ https://bugzilla.gnome.org/show_bug.cgi?id=756069
+
+2015-10-07 11:25:52 +0100 Sebastian Dröge <sebastian@centricular.com>
+
+ * libs/gst/helpers/gst-ptp-helper.c:
+ gst-ptp-helper: #include <sys/socket.h> to fix net/if.h include on OSX 10.6
+ In file included from gst-ptp-helper.c:40:0:
+ /usr/include/net/if.h:265:19: error: field 'ifru_addr' has incomplete type
+ struct sockaddr ifru_addr;
+ https://bugzilla.gnome.org/show_bug.cgi?id=756136
+
+2015-09-28 16:01:55 +0100 Tim-Philipp Müller <tim@centricular.com>
+
+ * libs/gst/check/gstcheck.c:
+ check: fix 'format string is not a string literal' warning with clang
+ Broke this when I removed the G_GNUC_PRINTF in a previous
+ commit to fix indentation, since it was not really needed.
+ Turns out unlike gcc clang warns though if a non-literal
+ format string is passed then. Fix indentation differently.
+ http://clang.llvm.org/docs/AttributeReference.html#format-gnu-format
+
=== release 1.6.0 ===
-2015-09-25 Sebastian Dröge <slomo@coaxion.net>
+2015-09-25 23:14:33 +0200 Sebastian Dröge <sebastian@centricular.com>
+ * ChangeLog:
+ * NEWS:
+ * RELEASE:
* configure.ac:
- releasing 1.6.0
+ * docs/plugins/inspect/plugin-coreelements.xml:
+ * gstreamer.doap:
+ * win32/common/config.h:
+ * win32/common/gstversion.h:
+ Release 1.6.0
+
+2015-09-25 22:41:16 +0200 Sebastian Dröge <sebastian@centricular.com>
+
+ * po/af.po:
+ * po/az.po:
+ * po/be.po:
+ * po/bg.po:
+ * po/ca.po:
+ * po/cs.po:
+ * po/da.po:
+ * po/de.po:
+ * po/el.po:
+ * po/en_GB.po:
+ * po/eo.po:
+ * po/es.po:
+ * po/eu.po:
+ * po/fi.po:
+ * po/fr.po:
+ * po/gl.po:
+ * po/hr.po:
+ * po/hu.po:
+ * po/id.po:
+ * po/it.po:
+ * po/ja.po:
+ * po/lt.po:
+ * po/nb.po:
+ * po/nl.po:
+ * po/pl.po:
+ * po/pt_BR.po:
+ * po/ro.po:
+ * po/ru.po:
+ * po/rw.po:
+ * po/sk.po:
+ * po/sl.po:
+ * po/sq.po:
+ * po/sr.po:
+ * po/sv.po:
+ * po/tr.po:
+ * po/uk.po:
+ * po/vi.po:
+ * po/zh_CN.po:
+ * po/zh_TW.po:
+ Update .po files
2015-09-25 10:18:07 +0900 Vineeth TM <vineeth.tm@samsung.com>
-This is GStreamer 1.6.0
+This is GStreamer 1.6.1
-The GStreamer team is proud to announce a new major feature release in the
-stable 1.x API series of your favourite cross-platform multimedia framework!
+The GStreamer team is proud to announce the first bugfix release in the stable
+1.6 release series of your favourite cross-platform multimedia framework!
-This release has been in the works for more than a year and is packed with new
-features, bug fixes and other improvements.
+This release only contains bugfixes and it is safe to update from 1.6.0. For a
+full list of bugfixes see Bugzilla:
+ https://bugzilla.gnome.org/buglist.cgi?bug_status=RESOLVED&bug_status=VERIFIED&limit=0&list_id=73005&order=bug_id&product=GStreamer&resolution=FIXED&target_milestone=1.6.1
-See http://gstreamer.freedesktop.org/releases/1.6/ for the full list of
-changes.
+See http://gstreamer.freedesktop.org/releases/1.6/ for the latest version of this document.
-Highlights
+Major bugfixes
+
+- Crashes in the gst-libav encoders were fixed
+- More DASH-IF test streams are working now
+- Live DASH, HLS and MS SmoothStreaming streams work more reliable and other
+ fixes for the adaptive streaming protocols
+- Reverse playback works with scaletempo to keep the audio pitch
+- Correct stream-time is reported for negative applied_rate
+- SRTP packet validation during decoding does not reject valid packets anymore
+- Fixes for audioaggregator and aggregator to start producing output at the
+ right time, and e.g. not outputting lots of silence in the beginning
+- gst-libav's internal ffmpeg snapshot was updated to 2.8.1
+- cerbero has support for Mac OS X 10.11 (El Capitan)
+- Various memory leaks were fixed, including major leaks in playbin, playsink
+ and decodebin
+- Various GObject-Introspection annotation fixes for bindings
+- and many, many more: https://bugzilla.gnome.org/buglist.cgi?bug_status=RESOLVED&bug_status=VERIFIED&limit=0&list_id=73005&order=bug_id&product=GStreamer&resolution=FIXED&target_milestone=1.6.1
-- Stereoscopic 3D and multiview video support
-- Trick mode API for key-frame only fast-forward/fast-reverse playback etc.
-- Improved DTS (decoding timestamp) vs. PTS (presentation timestamp) handling
- to account for negative DTS
-- New GstVideoConverter API for more optimised and more correct conversion of
- raw video frames between all supported formats, with rescaling
-- v4l2src now supports renegotiation
-- v4l2transform can now do scaling
-- V4L2 Element now report Colorimetry properly
-- Easier chunked recording of MP4, Matroska, Ogg, MPEG-TS: new splitmuxsink
- and multifilesink improvements
-- Content Protection signalling API and Common Encryption (CENC) support for
- DASH/MP4
-- Many adaptive streaming (DASH, HLS and MSS) improvements
-- New PTP and NTP network client clocks and better remote clock tracking
- stability
-- High-quality text subtitle overlay at display resolutions with glimagesink
- or gtkglsink
-- RECORD support for the GStreamer RTSP Server
-- Retransmissions (RTX) support in RTSP server and client
-- RTSP seeking support in client and server has been fixed
-- RTCP scheduling improvements and reduced size RTCP support
-- MP4/MOV muxer acquired a new "robust" mode of operation which attempts to
- keep the output file in a valid state at all times
-- Live mixing support in aggregator, audiomixer and compositor was improved a
- lot
-- compositor now supports rescaling and converting inputs streams on the fly
-- New audiointerleave element with proper input synchronisation and live input
- support
-- Blackmagic Design DeckLink capture and playback card support was rewritten
- from scratch; 2k/4k support; mode sensing
-- KLV metadata support in RTP and MPEG-TS
-- H.265 video encoder (x265), decoders (libav, libde265) and RTP payloader and
- depayloaders
-- New DTLS plugin and SRTP/DTLS support
-- OpenGL3 support, multiple contexts and context propagation, 3D video,
- transfer/conversion separation, subtitle blending
-- New OpenGL-based QML video sink, Gtk GL video sink, CoreAnimation
- CAOpenGLLayerSink video sink
-- gst-libav switched to ffmpeg as libav-provider, gains support for
- 3D/multiview video, trick modes, and the CAVS codec
-- GstHarness API for unit tests
-- gst-editing-services got a completely new ges-launch-1.0 interface, improved
- mixing support and integration into gst-validate
-- gnonlin has been deprecated in favor of nle (Non Linear Engine) in
- gst-editing-services
-- gst-validate has a new plugin system, an extensive default testsuite,
- support for concurrent test runs and valgrind support
-- cerbero build tool for SDK binary packages gains new 'bundle-source' command
-- Various improvements to the Android, iOS, OS X and Windows platform support
-Release notes for GStreamer 1.6.0
+Release notes for GStreamer 1.6.1
-The GStreamer team is proud to announce a new major feature release in the
-stable 1.x API series of your favourite cross-platform multimedia framework!
+The GStreamer team is proud to announce the first bugfix release in the stable
+1.6 release series of your favourite cross-platform multimedia framework!
-This release has been in the works for more than a year and is packed with new
-features, bug fixes and other improvements.
+This release only contains bugfixes and it is safe to update from 1.6.0. For a
+full list of bugfixes see Bugzilla.
-See
-http://gstreamer.freedesktop.org/releases/1.6/
-for the full list of changes.
+
+
+See http://gstreamer.freedesktop.org/releases/1.6/
+for the full release notes.
Bugs fixed in this release
- * 753887 : queue2: " Process SEEKING query " ok, but should handle SEEK events too (regression with non-seekable sources)
- * 755141 : inputselector: fix buffer leak
- * 755257 : Minor documentation typo in gstpad & gstcaps APIs
- * 755342 : element: state_change may fail because of release_request_pad (racy)
- * 755343 : funnel: Fix racy state change
- * 755511 : gstharness: don't crash when adding a sink-harness without h- > sinkpad
- * 755607 : ptpclock: Fix error leak during failures
+ * 747612 : Valgrind 3.7.0 chokes on match-leak-kinds in gst.supp
+ * 756069 : Gstreamer: Fix sample memory leaks
+ * 756136 : gstreamer-1.6.0 doesn't compile on OS X 10.6: header file issue in gst-ptp-helper.c
+ * 756645 : multiqueue: Improve incoming SEGMENT handling
+ * 756810 : segment_to_stream_time and position_from_stream_time miscalculate when applied_rate < 0
+ * 756898 : pad: gst_pad_probe_info_get_buffer_list() has wrong ownership transfer
+ * 757065 : uri: incorrect behavior when merging uris ending in ..
+ * 757257 : pad: Unblock blocking pad probes when receiving FLUSH_START in send_event() too
==== Download ====
Contributors to this release
- * Eunhae Choi
- * Havard Graff
+ * Edward Hervey
+ * Florin Apostol
* Sebastian Dröge
- * Stian Selnes
- * Vikram Fugro
+ * Stefan Sauer
+ * Tim-Philipp Müller
* Vineeth TM
+ * Vivia Nikolaidou
\ No newline at end of file
dnl when going to/from release please set the nano (fourth number) right !
dnl releases only do Wall, git and prerelease does Werror too
dnl
-AC_INIT([GStreamer],[1.6.0],[http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer],[gstreamer])
+AC_INIT([GStreamer],[1.6.1],[http://bugzilla.gnome.org/enter_bug.cgi?product=GStreamer],[gstreamer])
AG_GST_INIT
dnl initialize automake (we require GNU make)
dnl 1.10.9 (who knows) => 1009
dnl
dnl sets GST_LT_LDFLAGS
-AS_LIBTOOL(GST, 600, 0, 600)
+AS_LIBTOOL(GST, 601, 0, 601)
dnl *** autotools stuff ****
<description>GStreamer core elements</description>
<filename>../../plugins/elements/.libs/libgstcoreelements.so</filename>
<basename>libgstcoreelements.so</basename>
- <version>1.6.0</version>
+ <version>1.6.1</version>
<license>LGPL</license>
<source>gstreamer</source>
<package>GStreamer source release</package>
<release>
<Version>
+ <revision>1.6.1</revision>
+ <branch>1.6</branch>
+ <name></name>
+ <created>2015-10-30</created>
+ <file-release rdf:resource="http://gstreamer.freedesktop.org/src/gstreamer/gstreamer-1.6.1.tar.xz" />
+ </Version>
+ </release>
+
+ <release>
+ <Version>
<revision>1.6.0</revision>
<branch>1.6</branch>
<name></name>
#define GST_PACKAGE_ORIGIN "Unknown package origin"
/* GStreamer package release date/time for plugins as YYYY-MM-DD */
-#define GST_PACKAGE_RELEASE_DATETIME "2015-09-25"
+#define GST_PACKAGE_RELEASE_DATETIME "2015-10-30"
/* Define if static plugins should be built */
#undef GST_PLUGIN_BUILD_STATIC
#define PACKAGE_NAME "GStreamer"
/* Define to the full name and version of this package. */
-#define PACKAGE_STRING "GStreamer 1.6.0"
+#define PACKAGE_STRING "GStreamer 1.6.1"
/* Define to the one symbol short name of this package. */
#define PACKAGE_TARNAME "gstreamer"
#undef PACKAGE_URL
/* Define to the version of this package. */
-#define PACKAGE_VERSION "1.6.0"
+#define PACKAGE_VERSION "1.6.1"
/* directory where plugins are located */
#ifdef _DEBUG
#undef USE_POISONING
/* Version number of package */
-#define VERSION "1.6.0"
+#define VERSION "1.6.1"
/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most
significant byte first (like Motorola and SPARC, unlike Intel). */
*
* The micro version of GStreamer at compile time:
*/
-#define GST_VERSION_MICRO (0)
+#define GST_VERSION_MICRO (1)
/**
* GST_VERSION_NANO:
*
projects / platform / upstream / gstreamer.git / commitdiff