serial: 8250_dw: Avoid serial_outx code duplicate with new dw8250_check_lcr()

With the help of Heikki we take common code that
makes sure LCR write wasn't ignored and put it in new function called
dw8250_check_lcr(). This function serves 3 serial_out routines:
dw8250_serial_out(), dw8250_serial_out32(), and dw8250_serial_outq().

This patch only brings better code reuse.

Signed-off-by: Noam Camus <noamc@ezchip.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index a5d319e..ffe5e0c 100644 (file)
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -95,25 +95,43 @@ static void dw8250_force_idle(struct uart_port *p)
        (void)p->serial_in(p, UART_RX);
 }
 
-static void dw8250_serial_out(struct uart_port *p, int offset, int value)
+static void dw8250_check_lcr(struct uart_port *p, int value)
 {
-       writeb(value, p->membase + (offset << p->regshift));
+       void __iomem *offset = p->membase + (UART_LCR << p->regshift);
+       int tries = 1000;
 
        /* Make sure LCR write wasn't ignored */
-       if (offset == UART_LCR) {
-               int tries = 1000;
-               while (tries--) {
-                       unsigned int lcr = p->serial_in(p, UART_LCR);
-                       if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
-                               return;
-                       dw8250_force_idle(p);
-                       writeb(value, p->membase + (UART_LCR << p->regshift));
-               }
-               /*
-                * FIXME: this deadlocks if port->lock is already held
-                * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
-                */
+       while (tries--) {
+               unsigned int lcr = p->serial_in(p, UART_LCR);
+
+               if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
+                       return;
+
+               dw8250_force_idle(p);
+
+#ifdef CONFIG_64BIT
+               __raw_writeq(value & 0xff, offset);
+#else
+               if (p->iotype == UPIO_MEM32)
+                       writel(value, offset);
+               else
+                       writeb(value, offset);
+#endif
        }
+       /*
+        * FIXME: this deadlocks if port->lock is already held
+        * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
+        */
+}
+
+static void dw8250_serial_out(struct uart_port *p, int offset, int value)
+{
+       struct dw8250_data *d = p->private_data;
+
+       writeb(value, p->membase + (offset << p->regshift));
+
+       if (offset == UART_LCR && !d->uart_16550_compatible)
+               dw8250_check_lcr(p, value);
 }
 
 static unsigned int dw8250_serial_in(struct uart_port *p, int offset)
@@ -135,49 +153,26 @@ static unsigned int dw8250_serial_inq(struct uart_port *p, int offset)
 
 static void dw8250_serial_outq(struct uart_port *p, int offset, int value)
 {
+       struct dw8250_data *d = p->private_data;
+
        value &= 0xff;
        __raw_writeq(value, p->membase + (offset << p->regshift));
        /* Read back to ensure register write ordering. */
        __raw_readq(p->membase + (UART_LCR << p->regshift));
 
-       /* Make sure LCR write wasn't ignored */
-       if (offset == UART_LCR) {
-               int tries = 1000;
-               while (tries--) {
-                       unsigned int lcr = p->serial_in(p, UART_LCR);
-                       if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
-                               return;
-                       dw8250_force_idle(p);
-                       __raw_writeq(value & 0xff,
-                                    p->membase + (UART_LCR << p->regshift));
-               }
-               /*
-                * FIXME: this deadlocks if port->lock is already held
-                * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
-                */
-       }
+       if (offset == UART_LCR && !d->uart_16550_compatible)
+               dw8250_check_lcr(p, value);
 }
 #endif /* CONFIG_64BIT */
 
 static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
 {
+       struct dw8250_data *d = p->private_data;
+
        writel(value, p->membase + (offset << p->regshift));
 
-       /* Make sure LCR write wasn't ignored */
-       if (offset == UART_LCR) {
-               int tries = 1000;
-               while (tries--) {
-                       unsigned int lcr = p->serial_in(p, UART_LCR);
-                       if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
-                               return;
-                       dw8250_force_idle(p);
-                       writel(value, p->membase + (UART_LCR << p->regshift));
-               }
-               /*
-                * FIXME: this deadlocks if port->lock is already held
-                * dev_err(p->dev, "Couldn't set LCR to %d\n", value);
-                */
-       }
+       if (offset == UART_LCR && !d->uart_16550_compatible)
+               dw8250_check_lcr(p, value);
 }
 
 static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
@@ -463,10 +458,8 @@ static int dw8250_probe(struct platform_device *pdev)
        dw8250_quirks(p, data);
 
        /* If the Busy Functionality is not implemented, don't handle it */
-       if (data->uart_16550_compatible) {
-               p->serial_out = NULL;
+       if (data->uart_16550_compatible)
                p->handle_irq = NULL;
-       }
 
        if (!data->skip_autocfg)
                dw8250_setup_port(p);