mtd: nand: ecc-bch: Move BCH code to the generic NAND layer

BCH ECC code might be later re-used by the SPI NAND layer.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-3-miquel.raynal@bootlin.com

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 4a9aed4..55c17fb 100644 (file)
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -15,6 +15,17 @@ config MTD_NAND_ECC
        bool
        depends on MTD_NAND_CORE
 
+config MTD_NAND_ECC_SW_BCH
+       bool "Software BCH ECC engine"
+       select BCH
+       select MTD_NAND_ECC
+       default n
+       help
+         This enables support for software BCH error correction. Binary BCH
+         codes are more powerful and cpu intensive than traditional Hamming
+         ECC codes. They are used with NAND devices requiring more than 1 bit
+         of error correction.
+
 endmenu
 
 endmenu

diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 9813729..c7179ff 100644 (file)
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -8,3 +8,4 @@ obj-y   += raw/
 obj-y  += spi/
 
 nandcore-$(CONFIG_MTD_NAND_ECC) += ecc.o
+nandcore-$(CONFIG_MTD_NAND_ECC_SW_BCH) += ecc-sw-bch.o

diff --git a/drivers/mtd/nand/raw/nand_bch.c b/drivers/mtd/nand/ecc-sw-bch.c
similarity index 99%
rename from drivers/mtd/nand/raw/nand_bch.c
rename to drivers/mtd/nand/ecc-sw-bch.c
index 9d19ac1..6da14d0 100644 (file)
--- a/drivers/mtd/nand/raw/nand_bch.c
+++ b/drivers/mtd/nand/ecc-sw-bch.c
@@ -13,7 +13,7 @@
 #include <linux/bitops.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand_bch.h>
+#include <linux/mtd/nand-ecc-sw-bch.h>
 #include <linux/bch.h>
 
 /**

diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 6c46f25..b73860a 100644 (file)
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -22,16 +22,6 @@ menuconfig MTD_RAW_NAND
 
 if MTD_RAW_NAND
 
-config MTD_NAND_ECC_SW_BCH
-       bool "Support software BCH ECC"
-       select BCH
-       default n
-       help
-         This enables support for software BCH error correction. Binary BCH
-         codes are more powerful and cpu intensive than traditional Hamming
-         ECC codes. They are used with NAND devices requiring more than 1 bit
-         of error correction.
-
 comment "Raw/parallel NAND flash controllers"
 
 config MTD_NAND_DENALI

diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index 2930f5b..7690430 100644 (file)
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -2,7 +2,6 @@
 
 obj-$(CONFIG_MTD_RAW_NAND)             += nand.o
 obj-$(CONFIG_MTD_NAND_ECC_SW_HAMMING)  += nand_ecc.o
-nand-$(CONFIG_MTD_NAND_ECC_SW_BCH)     += nand_bch.o
 obj-$(CONFIG_MTD_SM_COMMON)            += sm_common.o
 
 obj-$(CONFIG_MTD_NAND_CAFE)            += cafe_nand.o

diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 1f0d542..7edcf08 100644 (file)
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -36,7 +36,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/nand_bch.h>
+#include <linux/mtd/nand-ecc-sw-bch.h>
 #include <linux/interrupt.h>
 #include <linux/bitops.h>
 #include <linux/io.h>

diff --git a/drivers/mtd/nand/raw/nandsim.c b/drivers/mtd/nand/raw/nandsim.c
index a8048cb..9c940ea 100644 (file)
--- a/drivers/mtd/nand/raw/nandsim.c
+++ b/drivers/mtd/nand/raw/nandsim.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
-#include <linux/mtd/nand_bch.h>
+#include <linux/mtd/nand-ecc-sw-bch.h>
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
 #include <linux/list.h>

diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
index 512f607..0ef209e 100644 (file)
--- a/drivers/mtd/nand/raw/omap2.c
+++ b/drivers/mtd/nand/raw/omap2.c
@@ -23,7 +23,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 
-#include <linux/mtd/nand_bch.h>
+#include <linux/mtd/nand-ecc-sw-bch.h>
 #include <linux/platform_data/elm.h>
 
 #include <linux/omap-gpmc.h>

diff --git a/include/linux/mtd/nand_bch.h b/include/linux/mtd/nand-ecc-sw-bch.h
similarity index 92%
rename from include/linux/mtd/nand_bch.h
rename to include/linux/mtd/nand-ecc-sw-bch.h
index d5956cc..1e1ee3a 100644 (file)
--- a/include/linux/mtd/nand_bch.h
+++ b/include/linux/mtd/nand-ecc-sw-bch.h
@@ -5,8 +5,8 @@
  * This file is the header for the NAND BCH ECC implementation.
  */
 
-#ifndef __MTD_NAND_BCH_H__
-#define __MTD_NAND_BCH_H__
+#ifndef __MTD_NAND_ECC_SW_BCH_H__
+#define __MTD_NAND_ECC_SW_BCH_H__
 
 struct mtd_info;
 struct nand_chip;
@@ -63,4 +63,4 @@ static inline void nand_bch_free(struct nand_bch_control *nbc) {}
 
 #endif /* CONFIG_MTD_NAND_ECC_SW_BCH */
 
-#endif /* __MTD_NAND_BCH_H__ */
+#endif /* __MTD_NAND_ECC_SW_BCH_H__ */