struct symtab_and_line stop_pc_sal;
struct frame_info *frame;
struct gdbarch *gdbarch;
+ CORE_ADDR jmp_buf_pc;
+ struct bpstat_what what;
- {
- /* Handle cases caused by hitting a breakpoint. */
-
- CORE_ADDR jmp_buf_pc;
- struct bpstat_what what;
+ /* Handle cases caused by hitting a breakpoint. */
- frame = get_current_frame ();
- gdbarch = get_frame_arch (frame);
+ frame = get_current_frame ();
+ gdbarch = get_frame_arch (frame);
- what = bpstat_what (ecs->event_thread->control.stop_bpstat);
+ what = bpstat_what (ecs->event_thread->control.stop_bpstat);
- if (what.call_dummy)
- {
- stop_stack_dummy = what.call_dummy;
- }
+ if (what.call_dummy)
+ {
+ stop_stack_dummy = what.call_dummy;
+ }
- /* If we hit an internal event that triggers symbol changes, the
- current frame will be invalidated within bpstat_what (e.g.,
- if we hit an internal solib event). Re-fetch it. */
- frame = get_current_frame ();
- gdbarch = get_frame_arch (frame);
+ /* If we hit an internal event that triggers symbol changes, the
+ current frame will be invalidated within bpstat_what (e.g., if we
+ hit an internal solib event). Re-fetch it. */
+ frame = get_current_frame ();
+ gdbarch = get_frame_arch (frame);
- switch (what.main_action)
- {
- case BPSTAT_WHAT_SET_LONGJMP_RESUME:
- /* If we hit the breakpoint at longjmp while stepping, we
- install a momentary breakpoint at the target of the
- jmp_buf. */
+ switch (what.main_action)
+ {
+ case BPSTAT_WHAT_SET_LONGJMP_RESUME:
+ /* If we hit the breakpoint at longjmp while stepping, we
+ install a momentary breakpoint at the target of the
+ jmp_buf. */
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME\n");
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME\n");
- ecs->event_thread->stepping_over_breakpoint = 1;
+ ecs->event_thread->stepping_over_breakpoint = 1;
- if (what.is_longjmp)
+ if (what.is_longjmp)
+ {
+ struct value *arg_value;
+
+ /* If we set the longjmp breakpoint via a SystemTap probe,
+ then use it to extract the arguments. The destination PC
+ is the third argument to the probe. */
+ arg_value = probe_safe_evaluate_at_pc (frame, 2);
+ if (arg_value)
+ jmp_buf_pc = value_as_address (arg_value);
+ else if (!gdbarch_get_longjmp_target_p (gdbarch)
+ || !gdbarch_get_longjmp_target (gdbarch,
+ frame, &jmp_buf_pc))
{
- struct value *arg_value;
-
- /* If we set the longjmp breakpoint via a SystemTap
- probe, then use it to extract the arguments. The
- destination PC is the third argument to the
- probe. */
- arg_value = probe_safe_evaluate_at_pc (frame, 2);
- if (arg_value)
- jmp_buf_pc = value_as_address (arg_value);
- else if (!gdbarch_get_longjmp_target_p (gdbarch)
- || !gdbarch_get_longjmp_target (gdbarch,
- frame, &jmp_buf_pc))
- {
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME "
- "(!gdbarch_get_longjmp_target)\n");
- keep_going (ecs);
- return;
- }
-
- /* Insert a breakpoint at resume address. */
- insert_longjmp_resume_breakpoint (gdbarch, jmp_buf_pc);
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: BPSTAT_WHAT_SET_LONGJMP_RESUME "
+ "(!gdbarch_get_longjmp_target)\n");
+ keep_going (ecs);
+ return;
}
- else
- check_exception_resume (ecs, frame);
- keep_going (ecs);
- return;
-
- case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
- {
- struct frame_info *init_frame;
- /* There are several cases to consider.
+ /* Insert a breakpoint at resume address. */
+ insert_longjmp_resume_breakpoint (gdbarch, jmp_buf_pc);
+ }
+ else
+ check_exception_resume (ecs, frame);
+ keep_going (ecs);
+ return;
- 1. The initiating frame no longer exists. In this case
- we must stop, because the exception or longjmp has gone
- too far.
+ case BPSTAT_WHAT_CLEAR_LONGJMP_RESUME:
+ {
+ struct frame_info *init_frame;
- 2. The initiating frame exists, and is the same as the
- current frame. We stop, because the exception or
- longjmp has been caught.
+ /* There are several cases to consider.
- 3. The initiating frame exists and is different from
- the current frame. This means the exception or longjmp
- has been caught beneath the initiating frame, so keep
- going.
+ 1. The initiating frame no longer exists. In this case we
+ must stop, because the exception or longjmp has gone too
+ far.
- 4. longjmp breakpoint has been placed just to protect
- against stale dummy frames and user is not interested
- in stopping around longjmps. */
+ 2. The initiating frame exists, and is the same as the
+ current frame. We stop, because the exception or longjmp
+ has been caught.
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog,
- "infrun: BPSTAT_WHAT_CLEAR_LONGJMP_RESUME\n");
+ 3. The initiating frame exists and is different from the
+ current frame. This means the exception or longjmp has
+ been caught beneath the initiating frame, so keep going.
- gdb_assert (ecs->event_thread->control.exception_resume_breakpoint
- != NULL);
- delete_exception_resume_breakpoint (ecs->event_thread);
+ 4. longjmp breakpoint has been placed just to protect
+ against stale dummy frames and user is not interested in
+ stopping around longjmps. */
- if (what.is_longjmp)
- {
- check_longjmp_breakpoint_for_call_dummy (ecs->event_thread->num);
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog,
+ "infrun: BPSTAT_WHAT_CLEAR_LONGJMP_RESUME\n");
- if (!frame_id_p (ecs->event_thread->initiating_frame))
- {
- /* Case 4. */
- keep_going (ecs);
- return;
- }
- }
+ gdb_assert (ecs->event_thread->control.exception_resume_breakpoint
+ != NULL);
+ delete_exception_resume_breakpoint (ecs->event_thread);
- init_frame = frame_find_by_id (ecs->event_thread->initiating_frame);
+ if (what.is_longjmp)
+ {
+ check_longjmp_breakpoint_for_call_dummy (ecs->event_thread->num);
- if (init_frame)
+ if (!frame_id_p (ecs->event_thread->initiating_frame))
{
- struct frame_id current_id
- = get_frame_id (get_current_frame ());
- if (frame_id_eq (current_id,
- ecs->event_thread->initiating_frame))
- {
- /* Case 2. Fall through. */
- }
- else
- {
- /* Case 3. */
- keep_going (ecs);
- return;
- }
+ /* Case 4. */
+ keep_going (ecs);
+ return;
}
+ }
- /* For Cases 1 and 2, remove the step-resume breakpoint,
- if it exists. */
- delete_step_resume_breakpoint (ecs->event_thread);
+ init_frame = frame_find_by_id (ecs->event_thread->initiating_frame);
- ecs->event_thread->control.stop_step = 1;
- print_end_stepping_range_reason ();
- stop_stepping (ecs);
+ if (init_frame)
+ {
+ struct frame_id current_id
+ = get_frame_id (get_current_frame ());
+ if (frame_id_eq (current_id,
+ ecs->event_thread->initiating_frame))
+ {
+ /* Case 2. Fall through. */
+ }
+ else
+ {
+ /* Case 3. */
+ keep_going (ecs);
+ return;
+ }
}
- return;
-
- case BPSTAT_WHAT_SINGLE:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SINGLE\n");
- ecs->event_thread->stepping_over_breakpoint = 1;
- /* Still need to check other stuff, at least the case where
- we are stepping and step out of the right range. */
- break;
- case BPSTAT_WHAT_STEP_RESUME:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STEP_RESUME\n");
+ /* For Cases 1 and 2, remove the step-resume breakpoint, if it
+ exists. */
+ delete_step_resume_breakpoint (ecs->event_thread);
- delete_step_resume_breakpoint (ecs->event_thread);
- if (ecs->event_thread->control.proceed_to_finish
- && execution_direction == EXEC_REVERSE)
- {
- struct thread_info *tp = ecs->event_thread;
-
- /* We are finishing a function in reverse, and just hit
- the step-resume breakpoint at the start address of
- the function, and we're almost there -- just need to
- back up by one more single-step, which should take us
- back to the function call. */
- tp->control.step_range_start = tp->control.step_range_end = 1;
- keep_going (ecs);
- return;
- }
- fill_in_stop_func (gdbarch, ecs);
- if (stop_pc == ecs->stop_func_start
- && execution_direction == EXEC_REVERSE)
- {
- /* We are stepping over a function call in reverse, and
- just hit the step-resume breakpoint at the start
- address of the function. Go back to single-stepping,
- which should take us back to the function call. */
- ecs->event_thread->stepping_over_breakpoint = 1;
- keep_going (ecs);
- return;
- }
- break;
+ ecs->event_thread->control.stop_step = 1;
+ print_end_stepping_range_reason ();
+ stop_stepping (ecs);
+ }
+ return;
- case BPSTAT_WHAT_STOP_NOISY:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_NOISY\n");
- stop_print_frame = 1;
+ case BPSTAT_WHAT_SINGLE:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_SINGLE\n");
+ ecs->event_thread->stepping_over_breakpoint = 1;
+ /* Still need to check other stuff, at least the case where we
+ are stepping and step out of the right range. */
+ break;
- /* We are about to nuke the step_resume_breakpointt via the
- cleanup chain, so no need to worry about it here. */
+ case BPSTAT_WHAT_STEP_RESUME:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STEP_RESUME\n");
- stop_stepping (ecs);
+ delete_step_resume_breakpoint (ecs->event_thread);
+ if (ecs->event_thread->control.proceed_to_finish
+ && execution_direction == EXEC_REVERSE)
+ {
+ struct thread_info *tp = ecs->event_thread;
+
+ /* We are finishing a function in reverse, and just hit the
+ step-resume breakpoint at the start address of the
+ function, and we're almost there -- just need to back up
+ by one more single-step, which should take us back to the
+ function call. */
+ tp->control.step_range_start = tp->control.step_range_end = 1;
+ keep_going (ecs);
return;
+ }
+ fill_in_stop_func (gdbarch, ecs);
+ if (stop_pc == ecs->stop_func_start
+ && execution_direction == EXEC_REVERSE)
+ {
+ /* We are stepping over a function call in reverse, and just
+ hit the step-resume breakpoint at the start address of
+ the function. Go back to single-stepping, which should
+ take us back to the function call. */
+ ecs->event_thread->stepping_over_breakpoint = 1;
+ keep_going (ecs);
+ return;
+ }
+ break;
- case BPSTAT_WHAT_STOP_SILENT:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_SILENT\n");
- stop_print_frame = 0;
+ case BPSTAT_WHAT_STOP_NOISY:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_NOISY\n");
+ stop_print_frame = 1;
- /* We are about to nuke the step_resume_breakpoin via the
- cleanup chain, so no need to worry about it here. */
+ /* We are about to nuke the step_resume_breakpointt via the
+ cleanup chain, so no need to worry about it here. */
- stop_stepping (ecs);
- return;
+ stop_stepping (ecs);
+ return;
- case BPSTAT_WHAT_HP_STEP_RESUME:
- if (debug_infrun)
- fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_HP_STEP_RESUME\n");
+ case BPSTAT_WHAT_STOP_SILENT:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_STOP_SILENT\n");
+ stop_print_frame = 0;
- delete_step_resume_breakpoint (ecs->event_thread);
- if (ecs->event_thread->step_after_step_resume_breakpoint)
- {
- /* Back when the step-resume breakpoint was inserted, we
- were trying to single-step off a breakpoint. Go back
- to doing that. */
- ecs->event_thread->step_after_step_resume_breakpoint = 0;
- ecs->event_thread->stepping_over_breakpoint = 1;
- keep_going (ecs);
- return;
- }
- break;
+ /* We are about to nuke the step_resume_breakpoin via the
+ cleanup chain, so no need to worry about it here. */
- case BPSTAT_WHAT_KEEP_CHECKING:
- break;
+ stop_stepping (ecs);
+ return;
+
+ case BPSTAT_WHAT_HP_STEP_RESUME:
+ if (debug_infrun)
+ fprintf_unfiltered (gdb_stdlog, "infrun: BPSTAT_WHAT_HP_STEP_RESUME\n");
+
+ delete_step_resume_breakpoint (ecs->event_thread);
+ if (ecs->event_thread->step_after_step_resume_breakpoint)
+ {
+ /* Back when the step-resume breakpoint was inserted, we
+ were trying to single-step off a breakpoint. Go back to
+ doing that. */
+ ecs->event_thread->step_after_step_resume_breakpoint = 0;
+ ecs->event_thread->stepping_over_breakpoint = 1;
+ keep_going (ecs);
+ return;
}
+ break;
+
+ case BPSTAT_WHAT_KEEP_CHECKING:
+ break;
}
- /* We come here if we hit a breakpoint but should not
- stop for it. Possibly we also were stepping
- and should stop for that. So fall through and
- test for stepping. But, if not stepping,
- do not stop. */
+ /* We come here if we hit a breakpoint but should not stop for it.
+ Possibly we also were stepping and should stop for that. So fall
+ through and test for stepping. But, if not stepping, do not
+ stop. */
/* In all-stop mode, if we're currently stepping but have stopped in
some other thread, we need to switch back to the stepped thread. */
projects / external / binutils.git / commitdiff