verdin-imx8mm/verdin-imx8mp: synchronise device trees with linux

Synchronise device trees with linux v6.5-rc1.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

diff --git a/arch/arm/dts/imx8mm-mx8menlo.dts b/arch/arm/dts/imx8mm-mx8menlo.dts
index 32f6f2f..0b123a8 100644 (file)
--- a/arch/arm/dts/imx8mm-mx8menlo.dts
+++ b/arch/arm/dts/imx8mm-mx8menlo.dts
@@ -10,6 +10,7 @@
 / {
        model = "MENLO MX8MM EMBEDDED DEVICE";
        compatible = "menlo,mx8menlo",
+                    "toradex,verdin-imx8mm-nonwifi",
                     "toradex,verdin-imx8mm",
                     "fsl,imx8mm";
 
@@ -250,21 +251,21 @@
                /* SODIMM 96 */
                MX8MM_IOMUXC_SAI1_RXD2_GPIO4_IO4                        0x1c4
                /* CPLD_D[7] */
-               MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5                        0x1c4
+               MX8MM_IOMUXC_SAI1_RXD3_GPIO4_IO5                        0x184
                /* CPLD_D[6] */
-               MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0                        0x1c4
+               MX8MM_IOMUXC_SAI1_RXFS_GPIO4_IO0                        0x184
                /* CPLD_D[5] */
-               MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11                        0x1c4
+               MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11                        0x184
                /* CPLD_D[4] */
-               MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12                       0x1c4
+               MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12                       0x184
                /* CPLD_D[3] */
-               MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13                       0x1c4
+               MX8MM_IOMUXC_SAI1_TXD1_GPIO4_IO13                       0x184
                /* CPLD_D[2] */
-               MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14                       0x1c4
+               MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14                       0x184
                /* CPLD_D[1] */
-               MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15                       0x1c4
+               MX8MM_IOMUXC_SAI1_TXD3_GPIO4_IO15                       0x184
                /* CPLD_D[0] */
-               MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16                       0x1c4
+               MX8MM_IOMUXC_SAI1_TXD4_GPIO4_IO16                       0x184
                /* KBD_intK */
                MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27                       0x1c4
                /* DISP_reset */

diff --git a/arch/arm/dts/imx8mm-verdin-dahlia.dtsi b/arch/arm/dts/imx8mm-verdin-dahlia.dtsi
deleted file mode 100644 (file)
index c2a5c2f..0000000
--- a/arch/arm/dts/imx8mm-verdin-dahlia.dtsi
+++ /dev/null
@@ -1,150 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/ {
-       sound_card: sound-card {
-               compatible = "simple-audio-card";
-               simple-audio-card,bitclock-master = <&dailink_master>;
-               simple-audio-card,format = "i2s";
-               simple-audio-card,frame-master = <&dailink_master>;
-               simple-audio-card,name = "imx8mm-wm8904";
-               simple-audio-card,routing =
-                       "Headphone Jack", "HPOUTL",
-                       "Headphone Jack", "HPOUTR",
-                       "IN2L", "Line In Jack",
-                       "IN2R", "Line In Jack",
-                       "Headphone Jack", "MICBIAS",
-                       "IN1L", "Headphone Jack";
-               simple-audio-card,widgets =
-                       "Microphone", "Headphone Jack",
-                       "Headphone", "Headphone Jack",
-                       "Line", "Line In Jack";
-
-               dailink_master: simple-audio-card,codec {
-                       clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
-                       sound-dai = <&wm8904_1a>;
-               };
-
-               simple-audio-card,cpu {
-                       sound-dai = <&sai2>;
-               };
-       };
-};
-
-/* Verdin SPI_1 */
-&ecspi2 {
-       status = "okay";
-};
-
-/* EEPROM on display adapter boards */
-&eeprom_display_adapter {
-       status = "okay";
-};
-
-/* EEPROM on Verdin Development board */
-&eeprom_carrier_board {
-       status = "okay";
-};
-
-&fec1 {
-       status = "okay";
-};
-
-/* Verdin QSPI_1 */
-&flexspi {
-       status = "okay";
-};
-
-/* Current measurement into module VCC */
-&hwmon {
-       status = "okay";
-};
-
-&hwmon_temp {
-       vs-supply = <&reg_1p8v>;
-       status = "okay";
-};
-
-&i2c3 {
-       status = "okay";
-};
-
-/* Verdin I2C_1 */
-&i2c4 {
-       status = "okay";
-
-       /* Audio Codec */
-       wm8904_1a: audio-codec@1a {
-               compatible = "wlf,wm8904";
-               AVDD-supply = <&reg_3p3v>;
-               clocks = <&clk IMX8MM_CLK_SAI2_ROOT>;
-               clock-names = "mclk";
-               CPVDD-supply = <&reg_3p3v>;
-               DBVDD-supply = <&reg_3p3v>;
-               DCVDD-supply = <&reg_3p3v>;
-               MICVDD-supply = <&reg_3p3v>;
-               reg = <0x1a>;
-               #sound-dai-cells = <0>;
-       };
-};
-
-/* Verdin PCIE_1 */
-&pcie0 {
-       status = "okay";
-};
-
-&pcie_phy {
-       status = "okay";
-};
-
-/* Verdin PWM_3_DSI */
-&pwm1 {
-       status = "okay";
-};
-
-/* Verdin PWM_1 */
-&pwm2 {
-       status = "okay";
-};
-
-/* Verdin PWM_2 */
-&pwm3 {
-       status = "okay";
-};
-
-/* Verdin I2S_1 */
-&sai2 {
-       status = "okay";
-};
-
-/* Verdin UART_3 */
-&uart1 {
-       status = "okay";
-};
-
-/* Verdin UART_1 */
-&uart2 {
-       status = "okay";
-};
-
-/* Verdin UART_2 */
-&uart3 {
-       status = "okay";
-};
-
-/* Verdin USB_1 */
-&usbotg1 {
-       status = "okay";
-};
-
-/* Verdin USB_2 */
-&usbotg2 {
-       status = "okay";
-};
-
-/* Verdin SD_1 */
-&usdhc2 {
-       status = "okay";
-};

diff --git a/arch/arm/dts/imx8mm-verdin-dev.dtsi b/arch/arm/dts/imx8mm-verdin-dev.dtsi
index 73cc3fa..3c4b8ca 100644 (file)
--- a/arch/arm/dts/imx8mm-verdin-dev.dtsi
+++ b/arch/arm/dts/imx8mm-verdin-dev.dtsi
@@ -3,14 +3,13 @@
  * Copyright 2022 Toradex
  */
 
-#include "imx8mm-verdin-dahlia.dtsi"
-
 / {
        sound_card: sound-card {
                compatible = "simple-audio-card";
                simple-audio-card,bitclock-master = <&dailink_master>;
                simple-audio-card,format = "i2s";
                simple-audio-card,frame-master = <&dailink_master>;
+               simple-audio-card,mclk-fs = <256>;
                simple-audio-card,name = "imx8mm-nau8822";
                simple-audio-card,routing =
                        "Headphones", "LHP",
@@ -41,27 +40,121 @@
        };
 };
 
+/* Verdin SPI_1 */
+&ecspi2 {
+       status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+       status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+       status = "okay";
+};
+
+&fec1 {
+       status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+       status = "okay";
+};
+
+/* Current measurement into module VCC */
+&hwmon {
+       status = "okay";
+};
+
+&hwmon_temp {
+       vs-supply = <&reg_1p8v>;
+       status = "okay";
+};
+
+&i2c3 {
+       status = "okay";
+};
+
 &gpio_expander_21 {
        status = "okay";
 };
 
 /* Verdin I2C_1 */
 &i2c4 {
+       status = "okay";
+
        /* Audio Codec */
        nau8822_1a: audio-codec@1a {
                compatible = "nuvoton,nau8822";
                reg = <0x1a>;
+               #sound-dai-cells = <0>;
        };
 };
 
+/* Verdin PCIE_1 */
+&pcie0 {
+       status = "okay";
+};
+
+&pcie_phy {
+       status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm1 {
+       status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm2 {
+       status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm3 {
+       status = "okay";
+};
+
+/* Verdin I2S_1 */
+&sai2 {
+       status = "okay";
+};
+
+/* Verdin UART_3 */
+&uart1 {
+       status = "okay";
+};
+
 /* Verdin UART_1, connector X50 through RS485 transceiver */
 &uart2 {
        linux,rs485-enabled-at-boot-time;
        rs485-rts-active-low;
        rs485-rx-during-tx;
+       status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart3 {
+       status = "okay";
+};
+
+/* Verdin USB_1 */
+&usbotg1 {
+       disable-over-current;
+       status = "okay";
+};
+
+/* Verdin USB_2 */
+&usbotg2 {
+       disable-over-current;
+       status = "okay";
 };
 
 /* Limit frequency on dev board due to long traces and bad signal integrity */
 &usdhc2 {
        max-frequency = <100000000>;
+       status = "okay";
 };

diff --git a/arch/arm/dts/imx8mm-verdin.dtsi b/arch/arm/dts/imx8mm-verdin.dtsi
index bcab830..6f08115 100644 (file)
--- a/arch/arm/dts/imx8mm-verdin.dtsi
+++ b/arch/arm/dts/imx8mm-verdin.dtsi
@@ -3,8 +3,8 @@
  * Copyright 2022 Toradex
  */
 
-#include "dt-bindings/phy/phy-imx8-pcie.h"
-#include "dt-bindings/pwm/pwm.h"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
 #include "imx8mm.dtsi"
 
 / {
@@ -56,7 +56,11 @@
        hdmi_connector: hdmi-connector {
                compatible = "hdmi-connector";
                ddc-i2c-bus = <&i2c2>;
+               /* Verdin PWM_3_DSI (SODIMM 19) */
+               hpd-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
                label = "hdmi";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_pwm_3_dsi_hpd_gpio>;
                type = "a";
                status = "disabled";
        };
@@ -95,9 +99,10 @@
                compatible = "regulator-fixed";
                enable-active-high;
                gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
-               off-on-delay = <500000>;
+               off-on-delay-us = <500000>;
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_reg_eth>;
+               regulator-always-on;
                regulator-boot-on;
                regulator-max-microvolt = <3300000>;
                regulator-min-microvolt = <3300000>;
@@ -134,7 +139,7 @@
                enable-active-high;
                /* Verdin SD_1_PWR_EN (SODIMM 76) */
                gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-               off-on-delay = <100000>;
+               off-on-delay-us = <100000>;
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
                regulator-max-microvolt = <3300000>;
@@ -183,15 +188,15 @@
        ddrc_opp_table: opp-table {
                compatible = "operating-points-v2";
 
-               opp-25M {
+               opp-25000000 {
                        opp-hz = /bits/ 64 <25000000>;
                };
 
-               opp-100M {
+               opp-100000000 {
                        opp-hz = /bits/ 64 <100000000>;
                };
 
-               opp-750M {
+               opp-750000000 {
                        opp-hz = /bits/ 64 <750000000>;
                };
        };
@@ -358,7 +363,6 @@
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_pmic>;
                reg = <0x25>;
-               sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 
                /*
                 * The bootloader is expected to switch on the I2C level shifter for the TLA2024 ADC
@@ -598,7 +602,7 @@
        hdmi_lontium_lt8912: hdmi@48 {
                compatible = "lontium,lt8912b";
                pinctrl-names = "default";
-               pinctrl-0 = <&pinctrl_gpio_10_dsi>, <&pinctrl_pwm_3_dsi_hpd_gpio>;
+               pinctrl-0 = <&pinctrl_gpio_10_dsi>;
                reg = <0x48>;
                /* Verdin GPIO_9_DSI (LT8912 INT, SODIMM 17, unused) */
                /* Verdin GPIO_10_DSI (SODIMM 21) */
@@ -610,7 +614,7 @@
                compatible = "atmel,maxtouch";
                /*
                 * Verdin GPIO_9_DSI
-                * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused)
+                * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
                 */
                interrupt-parent = <&gpio3>;
                interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
@@ -653,9 +657,6 @@
        assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
                                 <&clk IMX8MM_SYS_PLL2_250M>;
        assigned-clock-rates = <10000000>, <250000000>;
-       clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&clk IMX8MM_CLK_PCIE1_AUX>,
-                <&clk IMX8MM_CLK_PCIE1_PHY>;
-       clock-names = "pcie", "pcie_aux", "pcie_bus";
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_pcie0>;
        /* PCIE_1_RESET# (SODIMM 244) */
@@ -664,6 +665,7 @@
 
 &pcie_phy {
        clocks = <&clk IMX8MM_CLK_PCIE1_PHY>;
+       clock-names = "ref";
        fsl,clkreq-unsupported;
        fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
        fsl,tx-deemph-gen1 = <0x2d>;
@@ -739,7 +741,6 @@
        adp-disable;
        dr_mode = "otg";
        hnp-disable;
-       over-current-active-low;
        samsung,picophy-dc-vol-level-adjust = <7>;
        samsung,picophy-pre-emp-curr-control = <3>;
        srp-disable;
@@ -749,7 +750,6 @@
 /* Verdin USB_2 */
 &usbotg2 {
        dr_mode = "host";
-       over-current-active-low;
        samsung,picophy-dc-vol-level-adjust = <7>;
        samsung,picophy-pre-emp-curr-control = <3>;
        vbus-supply = <&reg_usb_otg2_vbus>;

diff --git a/arch/arm/dts/imx8mp-verdin-dahlia.dtsi b/arch/arm/dts/imx8mp-verdin-dahlia.dtsi
deleted file mode 100644 (file)
index 4b8f86f..0000000
--- a/arch/arm/dts/imx8mp-verdin-dahlia.dtsi
+++ /dev/null
@@ -1,129 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/*
- * Copyright 2022 Toradex
- */
-
-/* TODO: Audio Codec */
-
-&backlight {
-       power-supply = <&reg_3p3v>;
-};
-
-/* Verdin SPI_1 */
-&ecspi1 {
-       status = "okay";
-};
-
-/* EEPROM on display adapter boards */
-&eeprom_display_adapter {
-       status = "okay";
-};
-
-/* EEPROM on Verdin Development board */
-&eeprom_carrier_board {
-       status = "okay";
-};
-
-&eqos {
-       status = "okay";
-};
-
-&flexcan1 {
-       status = "okay";
-};
-
-&flexcan2 {
-       status = "okay";
-};
-
-/* Verdin QSPI_1 */
-&flexspi {
-       status = "okay";
-};
-
-/* Current measurement into module VCC */
-&hwmon {
-       status = "okay";
-};
-
-&hwmon_temp {
-       vs-supply = <&reg_1p8v>;
-       status = "okay";
-};
-
-/* Verdin I2C_2_DSI */
-&i2c2 {
-       status = "okay";
-};
-
-&i2c3 {
-       status = "okay";
-};
-
-/* Verdin I2C_1 */
-&i2c4 {
-       status = "okay";
-
-       /* TODO: Audio Codec */
-};
-
-/* TODO: Verdin PCIE_1 */
-
-/* Verdin PWM_1 */
-&pwm1 {
-       status = "okay";
-};
-
-/* Verdin PWM_2 */
-&pwm2 {
-       status = "okay";
-};
-
-/* Verdin PWM_3_DSI */
-&pwm3 {
-       status = "okay";
-};
-
-&reg_usdhc2_vmmc {
-       vin-supply = <&reg_3p3v>;
-};
-
-/* TODO: Verdin I2S_1 */
-
-/* Verdin UART_1 */
-&uart1 {
-       status = "okay";
-};
-
-/* Verdin UART_2 */
-&uart2 {
-       status = "okay";
-};
-
-/* Verdin UART_3, used as the Linux Console */
-&uart3 {
-       status = "okay";
-};
-
-/* Verdin USB_1 */
-&usb3_0 {
-       status = "okay";
-};
-
-&usb3_phy0 {
-       status = "okay";
-};
-
-/* Verdin USB_2 */
-&usb3_1 {
-       status = "okay";
-};
-
-&usb3_phy1 {
-       status = "okay";
-};
-
-/* Verdin SD_1 */
-&usdhc2 {
-       status = "okay";
-};

diff --git a/arch/arm/dts/imx8mp-verdin-dev.dtsi b/arch/arm/dts/imx8mp-verdin-dev.dtsi
index cefabe6..bdfdd4c 100644 (file)
--- a/arch/arm/dts/imx8mp-verdin-dev.dtsi
+++ b/arch/arm/dts/imx8mp-verdin-dev.dtsi
@@ -3,8 +3,6 @@
  * Copyright 2022 Toradex
  */
 
-#include "imx8mp-verdin-dahlia.dtsi"
-
 / {
        /* TODO: Audio Codec */
 
@@ -12,7 +10,7 @@
                compatible = "regulator-fixed";
                enable-active-high;
                gpio = <&gpio_expander_21 4 GPIO_ACTIVE_HIGH>; /* ETH_PWR_EN */
-               off-on-delay = <500000>;
+               off-on-delay-us = <500000>;
                regulator-max-microvolt = <3300000>;
                regulator-min-microvolt = <3300000>;
                regulator-name = "+V3.3_ETH";
@@ -21,16 +19,106 @@
        };
 };
 
+&backlight {
+       power-supply = <&reg_3p3v>;
+};
+
+/* Verdin SPI_1 */
+&ecspi1 {
+       status = "okay";
+};
+
+/* EEPROM on display adapter boards */
+&eeprom_display_adapter {
+       status = "okay";
+};
+
+/* EEPROM on Verdin Development board */
+&eeprom_carrier_board {
+       status = "okay";
+};
+
+&eqos {
+       status = "okay";
+};
+
 &fec {
        phy-supply = <&reg_eth2phy>;
        status = "okay";
 };
 
+&flexcan1 {
+       status = "okay";
+};
+
+&flexcan2 {
+       status = "okay";
+};
+
+/* Verdin QSPI_1 */
+&flexspi {
+       status = "okay";
+};
+
 &gpio_expander_21 {
        status = "okay";
        vcc-supply = <&reg_1p8v>;
 };
 
+/* Current measurement into module VCC */
+&hwmon {
+       status = "okay";
+};
+
+&hwmon_temp {
+       vs-supply = <&reg_1p8v>;
+       status = "okay";
+};
+
+/* Verdin I2C_2_DSI */
+&i2c2 {
+       status = "okay";
+};
+
+&i2c3 {
+       status = "okay";
+};
+
+/* Verdin I2C_1 */
+&i2c4 {
+       status = "okay";
+
+       /* TODO: Audio Codec */
+};
+
+/* Verdin PCIE_1 */
+&pcie {
+       status = "okay";
+};
+
+&pcie_phy {
+       status = "okay";
+};
+
+/* Verdin PWM_1 */
+&pwm1 {
+       status = "okay";
+};
+
+/* Verdin PWM_2 */
+&pwm2 {
+       status = "okay";
+};
+
+/* Verdin PWM_3_DSI */
+&pwm3 {
+       status = "okay";
+};
+
+&reg_usdhc2_vmmc {
+       vin-supply = <&reg_3p3v>;
+};
+
 /* TODO: Verdin I2C_1 with Audio Codec */
 
 /* Verdin UART_1, connector X50 through RS485 transceiver */
@@ -38,9 +126,40 @@
        linux,rs485-enabled-at-boot-time;
        rs485-rts-active-low;
        rs485-rx-during-tx;
+       status = "okay";
+};
+
+/* Verdin UART_2 */
+&uart2 {
+       status = "okay";
+};
+
+/* Verdin UART_3, used as the Linux Console */
+&uart3 {
+       status = "okay";
+};
+
+/* Verdin USB_1 */
+&usb3_0 {
+       status = "okay";
+};
+
+&usb3_phy0 {
+       status = "okay";
+};
+
+/* Verdin USB_2 */
+&usb3_1 {
+       fsl,permanently-attached;
+       status = "okay";
+};
+
+&usb3_phy1 {
+       status = "okay";
 };
 
 /* Limit frequency on dev board due to long traces and bad signal integrity */
 &usdhc2 {
        max-frequency = <100000000>;
+       status = "okay";
 };

diff --git a/arch/arm/dts/imx8mp-verdin-wifi.dtsi b/arch/arm/dts/imx8mp-verdin-wifi.dtsi
index 36289c1..ef94f9a 100644 (file)
--- a/arch/arm/dts/imx8mp-verdin-wifi.dtsi
+++ b/arch/arm/dts/imx8mp-verdin-wifi.dtsi
@@ -65,6 +65,11 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_bt_uart>;
        status = "okay";
+
+       bluetooth {
+               compatible = "mrvl,88w8997";
+               max-speed = <921600>;
+       };
 };
 
 /* On-module Wi-Fi */

diff --git a/arch/arm/dts/imx8mp-verdin.dtsi b/arch/arm/dts/imx8mp-verdin.dtsi
index 7b712d1..e9e4fcb 100644 (file)
--- a/arch/arm/dts/imx8mp-verdin.dtsi
+++ b/arch/arm/dts/imx8mp-verdin.dtsi
@@ -3,7 +3,8 @@
  * Copyright 2022 Toradex
  */
 
-#include "dt-bindings/pwm/pwm.h"
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
 #include "imx8mp.dtsi"
 
 / {
@@ -49,7 +50,7 @@
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_gpio_keys>;
 
-               button-wakeup {
+               key-wakeup {
                        debounce-interval = <10>;
                        /* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
                        gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
@@ -86,7 +87,7 @@
                compatible = "regulator-fixed";
                enable-active-high;
                gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; /* PMIC_EN_ETH */
-               off-on-delay = <500000>;
+               off-on-delay-us = <500000>;
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_reg_eth>;
                regulator-always-on;
@@ -127,7 +128,7 @@
                enable-active-high;
                /* Verdin SD_1_PWR_EN (SODIMM 76) */
                gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;
-               off-on-delay = <100000>;
+               off-on-delay-us = <100000>;
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
                regulator-max-microvolt = <3300000>;
@@ -354,16 +355,6 @@
                          "SODIMM_82",
                          "SODIMM_70",
                          "SODIMM_72";
-
-       ctrl-sleep-moci-hog {
-               gpio-hog;
-               /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
-               gpios = <29 GPIO_ACTIVE_HIGH>;
-               line-name = "CTRL_SLEEP_MOCI#";
-               output-high;
-               pinctrl-names = "default";
-               pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
-       };
 };
 
 &gpio3 {
@@ -432,6 +423,16 @@
                          "SODIMM_256",
                          "SODIMM_48",
                          "SODIMM_44";
+
+       ctrl-sleep-moci-hog {
+               gpio-hog;
+               /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+               gpios = <29 GPIO_ACTIVE_HIGH>;
+               line-name = "CTRL_SLEEP_MOCI#";
+               output-high;
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_ctrl_sleep_moci>;
+       };
 };
 
 /* On-module I2C */
@@ -452,7 +453,6 @@
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_pmic>;
                reg = <0x25>;
-               sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 
                /*
                 * The bootloader is expected to switch on LDO4 for the on-module +V3.3_ADC and the
@@ -678,8 +678,8 @@
                status = "disabled";
        };
 
-       lvds_ti_sn65dsi83: bridge@2c {
-               compatible = "ti,sn65dsi83";
+       lvds_ti_sn65dsi84: bridge@2c {
+               compatible = "ti,sn65dsi84";
                /* Verdin GPIO_9_DSI (SN65DSI84 IRQ, SODIMM 17, unused) */
                /* Verdin GPIO_10_DSI (SODIMM 21) */
                enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
@@ -712,7 +712,7 @@
                compatible = "atmel,maxtouch";
                /*
                 * Verdin GPIO_9_DSI
-                * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI83 IRQ albeit currently unused)
+                * (TOUCH_INT#, SODIMM 17, also routed to SN65DSI84 IRQ albeit currently unused)
                 */
                interrupt-parent = <&gpio4>;
                interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
@@ -748,7 +748,20 @@
        };
 };
 
-/* TODO: Verdin PCIE_1 */
+/* Verdin PCIE_1 */
+&pcie {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pcie>;
+       /* PCIE_1_RESET# (SODIMM 244) */
+       reset-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie_phy {
+       clocks = <&hsio_blk_ctrl>;
+       clock-names = "ref";
+       fsl,clkreq-unsupported;
+       fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+};
 
 /* Verdin PWM_1 */
 &pwm1 {
@@ -806,28 +819,45 @@
 };
 
 /* Verdin USB_1 */
-&usb3_phy0 {
-       vbus-supply = <&reg_usb1_vbus>;
+&usb3_0 {
+       fsl,disable-port-power-control;
+       fsl,over-current-active-low;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usb_1_oc_n>;
 };
 
 &usb_dwc3_0 {
+       /* dual role only, not full featured OTG */
        adp-disable;
        dr_mode = "otg";
        hnp-disable;
        maximum-speed = "high-speed";
-       over-current-active-low;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usb_1_id>;
+       role-switch-default-mode = "peripheral";
        srp-disable;
+       usb-role-switch;
+
+       connector {
+               compatible = "gpio-usb-b-connector", "usb-b-connector";
+               id-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+               label = "Type-C";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_usb_1_id>;
+               self-powered;
+               type = "micro";
+               vbus-supply = <&reg_usb1_vbus>;
+       };
 };
 
 /* Verdin USB_2 */
+&usb3_1 {
+       fsl,disable-port-power-control;
+};
+
 &usb3_phy1 {
        vbus-supply = <&reg_usb2_vbus>;
 };
 
 &usb_dwc3_1 {
-       disable-over-current;
        dr_mode = "host";
 };
 
@@ -1045,7 +1075,6 @@
 
        pinctrl_gpio_hog3: gpiohog3grp {
                fsl,pins =
-                       <MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13            0x1c4>, /* SODIMM 157 */
                        /* CSI_1_MCLK */
                        <MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15            0x1c4>; /* SODIMM 91 */
        };
@@ -1220,7 +1249,7 @@
 
        pinctrl_usb1_vbus: usb1vbusgrp {
                fsl,pins =
-                       <MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR          0x19>;  /* SODIMM 155 */
+                       <MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12            0x106>; /* SODIMM 155 */
        };
 
        /* USB_1_ID */
@@ -1229,9 +1258,15 @@
                        <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10           0x1c4>; /* SODIMM 161 */
        };
 
+       /* USB_1_OC# */
+       pinctrl_usb_1_oc_n: usb1ocngrp {
+               fsl,pins =
+                       <MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC           0x1c4>; /* SODIMM 157 */
+       };
+
        pinctrl_usb2_vbus: usb2vbusgrp {
                fsl,pins =
-                       <MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR          0x19>;  /* SODIMM 185 */
+                       <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14            0x106>; /* SODIMM 185 */
        };
 
        /* On-module Wi-Fi */

diff --git a/board/toradex/verdin-imx8mm/MAINTAINERS b/board/toradex/verdin-imx8mm/MAINTAINERS
index 974b3a1..b0f4329 100644 (file)
--- a/board/toradex/verdin-imx8mm/MAINTAINERS
+++ b/board/toradex/verdin-imx8mm/MAINTAINERS
@@ -3,7 +3,6 @@ M:      Marcel Ziswiler <marcel.ziswiler@toradex.com>
 W:     https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx-8m-mini
 S:     Maintained
 F:     arch/arm/dts/imx8mm-verdin.dtsi
-F:     arch/arm/dts/imx8mm-verdin-dahlia.dtsi
 F:     arch/arm/dts/imx8mm-verdin-dev.dtsi
 F:     arch/arm/dts/imx8mm-verdin-wifi.dtsi
 F:     arch/arm/dts/imx8mm-verdin-wifi-dev.dts

diff --git a/board/toradex/verdin-imx8mp/MAINTAINERS b/board/toradex/verdin-imx8mp/MAINTAINERS
index cff3c50..ea04a83 100644 (file)
--- a/board/toradex/verdin-imx8mp/MAINTAINERS
+++ b/board/toradex/verdin-imx8mp/MAINTAINERS
@@ -1,6 +1,5 @@
 Verdin iMX8M Plus
 F:     arch/arm/dts/imx8mp-verdin.dtsi
-F:     arch/arm/dts/imx8mp-verdin-dahlia.dtsi
 F:     arch/arm/dts/imx8mp-verdin-dev.dtsi
 F:     arch/arm/dts/imx8mp-verdin-wifi.dtsi
 F:     arch/arm/dts/imx8mp-verdin-wifi-dev.dts