struct qbman_swp *qbman_swp_init(const struct qbman_swp_desc *d)
{
int ret;
- struct qbman_swp *p = kmalloc(sizeof(*p), GFP_KERNEL);
+ struct qbman_swp *p = malloc(sizeof(struct qbman_swp));
if (!p)
return NULL;
qb_attr_code_encode(&code_sdqcr_dct, &p->sdq, qbman_sdqcr_dct_prio_ics);
qb_attr_code_encode(&code_sdqcr_fc, &p->sdq, qbman_sdqcr_fc_up_to_3);
qb_attr_code_encode(&code_sdqcr_tok, &p->sdq, 0xbb);
- p->vdq.busy = 0; /* TODO: convert to atomic_t */
+ atomic_set(&p->vdq.busy, 1);
p->vdq.valid_bit = QB_VALID_BIT;
p->dqrr.next_idx = 0;
p->dqrr.valid_bit = QB_VALID_BIT;
static struct qb_attr_code code_eq_qd_pri = QB_CODE(4, 16, 4);
static struct qb_attr_code code_eq_rsp_stash = QB_CODE(5, 16, 1);
static struct qb_attr_code code_eq_rsp_lo = QB_CODE(6, 0, 32);
-static struct qb_attr_code code_eq_rsp_hi = QB_CODE(7, 0, 32);
enum qbman_eq_cmd_e {
/* No enqueue, primarily for plugging ORP gaps for dropped frames */
{
uint32_t *cl = qb_cl(d);
- qb_attr_code_encode(&code_eq_rsp_lo, cl, lower32(storage_phys));
- qb_attr_code_encode(&code_eq_rsp_hi, cl, upper32(storage_phys));
+ qb_attr_code_encode_64(&code_eq_rsp_lo, (uint64_t *)cl, storage_phys);
qb_attr_code_encode(&code_eq_rsp_stash, cl, !!stash);
}
static struct qb_attr_code code_pull_token = QB_CODE(0, 16, 8);
static struct qb_attr_code code_pull_dqsource = QB_CODE(1, 0, 24);
static struct qb_attr_code code_pull_rsp_lo = QB_CODE(2, 0, 32);
-static struct qb_attr_code code_pull_rsp_hi = QB_CODE(3, 0, 32);
enum qb_pull_dt_e {
qb_pull_dt_channel,
}
qb_attr_code_encode(&code_pull_rls, cl, 1);
qb_attr_code_encode(&code_pull_stash, cl, !!stash);
- qb_attr_code_encode(&code_pull_rsp_lo, cl, lower32(storage_phys));
- qb_attr_code_encode(&code_pull_rsp_hi, cl, upper32(storage_phys));
+ qb_attr_code_encode_64(&code_pull_rsp_lo, (uint64_t *)cl, storage_phys);
}
void qbman_pull_desc_set_numframes(struct qbman_pull_desc *d, uint8_t numframes)
uint32_t *p;
uint32_t *cl = qb_cl(d);
- /* TODO: convert to atomic_t */
- if (s->vdq.busy)
+ if (!atomic_dec_and_test(&s->vdq.busy)) {
+ atomic_inc(&s->vdq.busy);
return -EBUSY;
- s->vdq.busy = 1;
+ }
s->vdq.storage = *(void **)&cl[4];
s->vdq.token = qb_attr_code_decode(&code_pull_token, cl);
p = qbman_cena_write_start(&s->sys, QBMAN_CENA_SWP_VDQCR);
{
uint32_t verb;
uint32_t response_verb;
- const struct ldpaa_dq *dq = qbman_cena_read(&s->sys,
- QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx));
- const uint32_t *p = qb_cl(dq);
+ uint32_t flags;
+ const struct ldpaa_dq *dq;
+ const uint32_t *p;
+ dq = qbman_cena_read(&s->sys, QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx));
+ p = qb_cl(dq);
verb = qb_attr_code_decode(&code_dqrr_verb, p);
- /* If the valid-bit isn't of the expected polarity, nothing there */
+
+ /* If the valid-bit isn't of the expected polarity, nothing there. Note,
+ * in the DQRR reset bug workaround, we shouldn't need to skip these
+ * check, because we've already determined that a new entry is available
+ * and we've invalidated the cacheline before reading it, so the
+ * valid-bit behaviour is repaired and should tell us what we already
+ * knew from reading PI.
+ */
if ((verb & QB_VALID_BIT) != s->dqrr.valid_bit) {
qbman_cena_invalidate_prefetch(&s->sys,
- QBMAN_CENA_SWP_DQRR(
- s->dqrr.next_idx));
+ QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx));
return NULL;
}
/* There's something there. Move "next_idx" attention to the next ring
* entry (and prefetch it) before returning what we found. */
s->dqrr.next_idx++;
- s->dqrr.next_idx &= 3; /* Wrap around at 4 */
+ s->dqrr.next_idx &= QBMAN_DQRR_SIZE - 1; /* Wrap around at 4 */
/* TODO: it's possible to do all this without conditionals, optimise it
* later. */
if (!s->dqrr.next_idx)
s->dqrr.valid_bit ^= QB_VALID_BIT;
- /* VDQCR "no longer busy" hook - if VDQCR shows "busy" and this is a
- * VDQCR result, mark it as non-busy. */
- if (s->vdq.busy) {
- uint32_t flags = ldpaa_dq_flags(dq);
-
- response_verb = qb_attr_code_decode(&code_dqrr_response, &verb);
- if ((response_verb == QBMAN_DQRR_RESPONSE_DQ) &&
- (flags & LDPAA_DQ_STAT_VOLATILE))
- s->vdq.busy = 0;
- }
+
+ /* If this is the final response to a volatile dequeue command
+ indicate that the vdq is no longer busy */
+ flags = ldpaa_dq_flags(dq);
+ response_verb = qb_attr_code_decode(&code_dqrr_response, &verb);
+ if ((response_verb == QBMAN_DQRR_RESPONSE_DQ) &&
+ (flags & LDPAA_DQ_STAT_VOLATILE) &&
+ (flags & LDPAA_DQ_STAT_EXPIRED))
+ atomic_inc(&s->vdq.busy);
+
qbman_cena_invalidate_prefetch(&s->sys,
QBMAN_CENA_SWP_DQRR(s->dqrr.next_idx));
return dq;
* reset "busy". We instead base the decision on whether the current
* result is sitting at the first 'storage' location of the busy
* command. */
- if (s->vdq.busy && (s->vdq.storage == dq))
- s->vdq.busy = 0;
+ if (s->vdq.storage == dq) {
+ s->vdq.storage = NULL;
+ atomic_inc(&s->vdq.busy);
+ }
return 1;
}
/* Management command result codes */
#define QBMAN_MC_RSLT_OK 0xf0
+/* TBD: as of QBMan 4.1, DQRR will be 8 rather than 4! */
+#define QBMAN_DQRR_SIZE 4
+
+
/* --------------------- */
/* portal data structure */
/* --------------------- */
* to whether or not a command can be submitted, not whether or
* not a previously-submitted command is still executing. In
* other words, once proof is seen that the previously-submitted
- * command is executing, "vdq" is no longer "busy". TODO:
- * convert this to "atomic_t" so that it is thread-safe (without
- * locking). */
- int busy;
+ * command is executing, "vdq" is no longer "busy".
+ */
+ atomic_t busy;
uint32_t valid_bit; /* 0x00 or 0x80 */
/* We need to determine when vdq is no longer busy. This depends
* on whether the "busy" (last-submitted) dequeue command is
- * targetting DQRR or main-memory, and detected is based on the
+ * targeting DQRR or main-memory, and detected is based on the
* presence of the dequeue command's "token" showing up in
* dequeue entries in DQRR or main-memory (respectively). Debug
* builds will, when submitting vdq commands, verify that the
return d32_uint32_t(code->lsoffset, code->width, cacheline[code->word]);
}
+
/* encode a field to a cacheline */
static inline void qb_attr_code_encode(const struct qb_attr_code *code,
uint32_t *cacheline, uint32_t val)
| e32_uint32_t(code->lsoffset, code->width, val);
}
+static inline void qb_attr_code_encode_64(const struct qb_attr_code *code,
+ uint64_t *cacheline, uint64_t val)
+{
+ cacheline[code->word / 2] = val;
+}
+
/* ---------------------- */
/* Descriptors/cachelines */
/* ---------------------- */
* a "descriptor" type that the caller can instantiate however they like.
* Ultimately though, it is just a cacheline of binary storage (or something
* smaller when it is known that the descriptor doesn't need all 64 bytes) for
- * holding pre-formatted pieces of harware commands. The performance-critical
+ * holding pre-formatted pieces of hardware commands. The performance-critical
* code can then copy these descriptors directly into hardware command
* registers more efficiently than trying to construct/format commands
* on-the-fly. The API user sees the descriptor as an array of 32-bit words in
projects / platform / kernel / u-boot.git / commitdiff