arm64: zynqmp: Sync psgtr node location with zcu104-revA

zcu104-revA has node below pinctrl which is not the same on revC. Sync
location for easier comparison.
Also zc1751-dc1 is not using this position.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/4b691bab5ba83b5352d4669bd54bcdb8273b2156.1623684253.git.michal.simek@xilinx.com

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
index 9f17630..d78439e 100644 (file)
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
@@ -58,13 +58,6 @@
        };
 };
 
-&psgtr {
-       status = "okay";
-       /* dp, usb3, sata */
-       clocks = <&clock_si5338_0>, <&clock_si5338_2>, <&clock_si5338_3>;
-       clock-names = "ref1", "ref2", "ref3";
-};
-
 &fpd_dma_chan1 {
        status = "okay";
 };
@@ -340,6 +333,13 @@
        };
 };
 
+&psgtr {
+       status = "okay";
+       /* dp, usb3, sata */
+       clocks = <&clock_si5338_0>, <&clock_si5338_2>, <&clock_si5338_3>;
+       clock-names = "ref1", "ref2", "ref3";
+};
+
 &qspi {
        status = "okay";
        flash@0 {

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
index fb8d76b..c21d961 100644 (file)
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
@@ -429,6 +429,13 @@
        };
 };
 
+&psgtr {
+       status = "okay";
+       /* nc, sata, usb3, dp */
+       clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>;
+       clock-names = "ref1", "ref2", "ref3";
+};
+
 &qspi {
        status = "okay";
        flash@0 {
@@ -446,13 +453,6 @@
        status = "okay";
 };
 
-&psgtr {
-       status = "okay";
-       /* nc, sata, usb3, dp */
-       clocks = <&clock_8t49n287_5>, <&clock_8t49n287_2>, <&clock_8t49n287_3>;
-       clock-names = "ref1", "ref2", "ref3";
-};
-
 &sata {
        status = "okay";
        /* SATA OOB timing settings */