+++ /dev/null
-%define __strip /bin/true
-%define _build_name_fmt %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.vanish.rpm
-# meta spec file for cross-chroot setup
-#
-# Copyright (c) 2009-2011 Martin Mohring (martin.mohring@opensuse.org)
-# Copyright (c) 2011 5eEcoSystems (info@5eecosystems.com)
-#
-# All modifications and additions to the file contributed by third parties
-# remain the property of the copyright owners, unless otherwise agreed
-# upon. The cross build accelerators as is, and modifications
-# and additions to the it, are licensed under the GPLv2.
-# In addition, the cross build accelerators are licensed together with
-# a package where they will be contained in
-# under the license of the prestine package (unless the
-# license for the pristine package is not an Open Source License, in which
-# case the license is the MIT License). An "Open Source License" is a
-# license that conforms to the Open Source Definition (Version 1.9)
-# published by the Open Source Initiative.
-
-#\/\/\/\/\/\/\/\/\/\/
-### only changes here
-
-#
-# The original package name
-%define oldname sed
-
-#
-# The architectures this meta package is built on
-%define myexclusive i586
-
-#
-# The required package for building this package
-# This can be distribution dependent. Good start is:
-# e.g. rpm grep tar sed patchelf
-#
-BuildRequires: rpm grep tar sed patchelf
-
-#
-# Additional required packages needed in addition to those of original package
-# e.g. (usually empty) for an accelerator to be 100% compatible
-#
-#Requires: <usuallyemptlylist>
-
-# For a real accelerator, also the old packge is required for compatibility
-# pls change this only if you know what you do
-Requires: %oldname
-
-#
-# Release under which to put the accelerator
-# e.g. 1 or higher
-#
-Release: 8.3
-
-### no changes needed below this line
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-### no changes needed
-#
-# The new package name - convention is %oldname-x86
-%define newname %{oldname}-x86
-#
-# The version of the original package is read from its rpm db info
-%{expand:%%define newversion %(rpm -q --qf '[%{version}]' %oldname)}
-#
-# The license of the original package is read from its rpm db info
-%{expand:%%define newlicense %(rpm -q --qf '[%{license}]' %oldname)}
-#
-# The group information of the original package
-%{expand:%%define newgroup %(rpm -q --qf '[%{group}]' %oldname)}
-#
-# The summary of the original package
-%{expand:%%define newsummary %(rpm -q --qf '[%{summary} - special version ]' %oldname)}
-#
-# New rpath to add to files on request
-%define newrpath "/emul/ia32-linux/lib:/emul/ia32-linux/usr/lib"
-%define newinterpreter /emul/ia32-linux/lib/ld-linux.so.2
-#
-# Some automatic checks for availability
-# binaries_to_prepare
-%define binaries_to_prepare %{expand:%(test -e %{_sourcedir}/binaries_to_prepare && echo 1 || echo 0)}
-%define libraries_to_prepare %{expand:%(test -e %{_sourcedir}/libraries_to_prepare && echo 1 || echo 0)}
-%define special_script %{expand:%(test -e %{_sourcedir}/special_script && echo 1 || echo 0)}
-%define files_to_ignore %{expand:%(test -e %{_sourcedir}/files_to_ignore && echo 1 || echo 0)}
-#
-### no changes needed below this line
-%define nodebug 1
-
-
-Name: %newname
-Version: %newversion
-AutoReqProv: 0
-Provides: %newname
-BuildRequires: %oldname
-# no auto requirements - they're generated
-License: %newlicense
-Group: %newgroup
-ExclusiveArch: %myexclusive
-Summary: Dont use %newsummary !
-BuildRoot: %{_tmppath}/%{name}-%{version}-build
-%if %binaries_to_prepare
-Source10: binaries_to_prepare
-%endif
-%if %libraries_to_prepare
-Source20: libraries_to_prepare
-%endif
-%if %special_script
-Source30: special_script
-%endif
-%if %files_to_ignore
-Source40: files_to_ignore
-%endif
-Source100: baselibs.conf
-
-%description
-This is a meta-package providing %name.
-It is not intended to be used on a normal system/device!
-Original description:
-%{expand:%(rpm -q --qf '[%{description}]' %oldname)}
-
-
-
-%prep
-
-%build
-
-%install
-%if %nodebug
-set +x
-%endif
-mkdir -p %buildroot
-rpm -ql %oldname > filestoinclude1
-
-# ignore files - construct sed script
-sedtmp="sedtmp.$$"
-echo "s#^%{_docdir}.*##" >> $sedtmp
-echo "s#^%{_mandir}.*##" >> $sedtmp
-echo "s#^%{_infodir}.*##" >> $sedtmp
-
-# evaluate files_to_ignore
-%if %files_to_ignore
-for i in `cat %{_sourcedir}/files_to_ignore`; do
- echo "Ignoring file: $i"
- echo "s#^${i}.*##" >> $sedtmp
-done
-%endif
-
-# ignore default filesystem files
-for i in `rpm -ql filesystem`; do
- echo "s#^${i}\$##" >> $sedtmp
-done
-
-#finish up
-echo "/^\$/d" >> $sedtmp
-
-#execute
-sed -f $sedtmp -i filestoinclude1
-
-# tar copy to buildroot
-tar -T filestoinclude1 -cpf - | ( cd %buildroot && tar -xpf - )
-rm filestoinclude1
-
-# Todo: refractor
-# no directories, in filelist
-find %buildroot > filestoinclude2
-cat filestoinclude2 | sed -e "s#%{buildroot}##g" | uniq | sort > filestoinclude1
-for i in `cat filestoinclude1`; do
-# no directories
- if ! test -d %buildroot/$i ; then
- #
- echo "$i" >> filestoinclude
- fi
-done
-rm filestoinclude1
-rm filestoinclude2
-
-# patchelf the binaries
-%if %binaries_to_prepare
-echo ""
-echo "[ .oO Preparing binaries Oo. ]"
-echo ""
-mkdir -p %buildroot/%{_prefix}/share/applybinary/
-for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do
- echo "Processing binary: $binary"
- tmp="tmp.$$"
-%if %nodebug
- debug=
-%else
- debug="--debug"
-%endif
- if file $binary | grep -q dynamic; then
- ldd $binary | grep -v "ld-linux" | grep -v "linux-gate" | sed -e "s#=.*##g" -e "s#^\t*##g" > $tmp
- deps=$(for i in `cat $tmp` ; do rpm -q --whatprovides "$i" | grep -v "no package"; done)
- cleandeps=$(echo "$cleandeps" "$deps" | sort | uniq | sed -e "s/-[0-9].*//g")
- patchelf $debug --set-rpath %newrpath %buildroot/$binary
- patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary
- patchelf $debug --set-rpath %newrpath %buildroot/$binary
- patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary
- if test -n "$debug"; then
- patchelf --print-rpath %buildroot/$binary
- patchelf --print-interpreter %buildroot/$binary
- fi
- fi
- echo "$binary" >> %buildroot/%{_prefix}/share/applybinary/%name
- echo ""
-done
-%endif
-
-# stub
-%if %libraries_to_prepare
-echo ""
-echo "[ .oO Preparing libraries Oo. ]"
-echo ""
-%endif
-
-# stub
-%if %special_script
-echo ""
-echo "[ .oO Executing special script Oo. ]"
-echo ""
-%endif
-
-# lets start the shellquote nightmare ;)
-shellquote()
-{
- for arg; do
- arg=${arg//\\/\\\\}
-# arg=${arg//\$/\$} # already needs quoting ;(
-# arg=${arg/\"/\\\"} # dito
-# arg=${arg//\`/\`} # dito
- arg=${arg//\\|/\|}
- arg=${arg//\\|/|}
- echo "$arg"
- done
-}
-
-
-echo "Creating baselibs_new.conf"
-echo ""
-rm -rRf /tmp/baselibs_new.conf || true
-
-shellquote "%{name}" >> /tmp/baselibs_new.conf
-shellquote " targettype x86 block!" >> /tmp/baselibs_new.conf
-shellquote " targettype 32bit block!" >> /tmp/baselibs_new.conf
-shellquote " targettype arm autoreqprov off" >> /tmp/baselibs_new.conf
-
-# automagically fill in basic requirements
-for i in $cleandeps ; do
- shellquote " targettype arm requires \"${i}-x86-arm\"" >> /tmp/baselibs_new.conf
-done
-
-# we require the native version
-shellquote " targettype arm requires \"%{oldname}\" " >> /tmp/baselibs_new.conf
-shellquote " targettype arm prefix /emul/ia32-linux" >> /tmp/baselibs_new.conf
-shellquote " targettype arm extension -arm" >> /tmp/baselibs_new.conf
-shellquote " targettype arm +/" >> /tmp/baselibs_new.conf
-
-# safe space and download time
-shellquote " targettype arm -/%{_mandir}" >> /tmp/baselibs_new.conf
-shellquote " targettype arm -/%{_docdir}" >> /tmp/baselibs_new.conf
-shellquote " targettype arm requires \"tizen-accelerator\"" >> /tmp/baselibs_new.conf
-
-# replace native with x86 binaries as defined in file
-%if %binaries_to_prepare
-# Todo: error handling if .orig-arm is present
-for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do
- shellquote " targettype arm post \" if test -e ${binary}.orig-arm -a -h ${binary}; then \" " >> /tmp/baselibs_new.conf
- shellquote " targettype arm post \" echo \"${binary}.orig-arm already present - skipping.\" \" " >> /tmp/baselibs_new.conf
- shellquote " targettype arm post \" else \" " >> /tmp/baselibs_new.conf
- shellquote " targettype arm post \" mv ${binary} ${binary}.orig-arm ; ln -s <prefix>${binary} ${binary} \"" >> /tmp/baselibs_new.conf
- shellquote " targettype arm post \" fi \" " >> /tmp/baselibs_new.conf
-done
-
-# shellquote " targettype arm post \"# XXX this is klunky and ugly, rpm itself should handle this\" " >> /tmp/baselibs_new.conf
-# shellquote " targettype arm post \"dbstat=/usr/lib/rpm/rpmdb_stat\" " >> /tmp/baselibs_new.conf
-# shellquote " targettype arm post \"if [ -x "\$dbstat" ]; then\" " >> /tmp/baselibs_new.conf
-# shellquote " targettype arm post \" if "\$dbstat" -e -h /var/lib/rpm 2>&1 \| grep -q \"t match environment version\"; then\" " >> /tmp/baselibs_new.conf
-# shellquote " targettype arm post \" file /bin/rpm ; rm -f /var/lib/rpm/__db.* && rpm --rebuilddb \" " >> /tmp/baselibs_new.conf
-# shellquote " targettype arm post \" fi\" " >> /tmp/baselibs_new.conf
-# shellquote " targettype arm post \"fi\" " >> /tmp/baselibs_new.conf
-
-
-shellquote " " >> /tmp/baselibs_new.conf
-for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do
-
- shellquote " targettype arm preun \" if test -e ${binary}.orig-arm ; then \"" >> /tmp/baselibs_new.conf
- shellquote " targettype arm preun \" rm -f ${binary} ; mv ${binary}.orig-arm ${binary}\"" >> /tmp/baselibs_new.conf
- shellquote " targettype arm preun \" fi \"" >> /tmp/baselibs_new.conf
-
-done
-%endif
-
-cat /tmp/baselibs_new.conf >> %{_sourcedir}/baselibs.conf
-
-echo "################################################################################"
-echo ""
-echo ""
-echo "REQUIREMENTS:"
-grep "requires" %{_sourcedir}/baselibs.conf | sort | uniq | sed -e "s# targettype.*requires ##g" | while read k ; do
- echo "CBinstall: $k"
-done
-echo "Runscripts: %{newname}-arm"
-echo ""
-echo ""
-echo "################################################################################"
-set -x
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%files -f filestoinclude
-%defattr(-,root,root)
-%if %binaries_to_prepare
-/%{_prefix}/share/applybinary/%name
-%endif
-%changelog
-* Fri Jul 6 2012 UkJung Kim <ujkim@samsung.com> - 1.0
-- Added and updated OBS-Accelerator-0.1.tar.bz2
-* Sun Apr 24 2011 Jan-Simon Möller <jsmoeller@linuxfoundation.org> - 1.0
-- Add baselibs.conf to src.rpm
-* Tue Jan 4 2011 Carsten Munk <carsten@maemo.org> - 1.0
-- Part of BMC#12113 (speedrpm implementation)
-- Add armv7hl and armv7nhl support
-- Initial version on meego.com (based off Jan-Simon Moller's other -x86 packages)
%define __strip /bin/true
-%define _build_name_fmt %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.dontuse.rpm
-# meta spec file for cross-chroot setup
+%define _build_name_fmt %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.vanish.rpm
+# meta spec file for cross-chroot setup
#
-# Copyright (c) 2010 Jan-Simon Möller (jsmoeller@linuxfoundation.org)
-# License: GPLv2
-
-## README
-##
-## In this file:
-## 1) define name of original package (see oldname)
-##
-## File binaries_to_prepare:
-## 2) fill in the binaries which need to be available to the foreign chroot
-## e.g. /bin/bash - this will make a i586 bash available
-##
+# Copyright (c) 2009-2011 Martin Mohring (martin.mohring@opensuse.org)
+# Copyright (c) 2011 5eEcoSystems (info@5eecosystems.com)
+#
+# All modifications and additions to the file contributed by third parties
+# remain the property of the copyright owners, unless otherwise agreed
+# upon. The cross build accelerators as is, and modifications
+# and additions to the it, are licensed under the GPLv2.
+# In addition, the cross build accelerators are licensed together with
+# a package where they will be contained in
+# under the license of the prestine package (unless the
+# license for the pristine package is not an Open Source License, in which
+# case the license is the MIT License). An "Open Source License" is a
+# license that conforms to the Open Source Definition (Version 1.9)
+# published by the Open Source Initiative.
#\/\/\/\/\/\/\/\/\/\/
### only changes here
+
#
# The original package name
%define oldname sqlite
+
#
# The architectures this meta package is built on
%define myexclusive i586
+
#
-### no changes needed below this line
-# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+# The required package for building this package
+# This can be distribution dependent. Good start is:
+# e.g. rpm grep tar sed patchelf
+#
+BuildRequires: rpm grep tar sed patchelf
+#
+# Additional required packages needed in addition to those of original package
+# e.g. (usually empty) for an accelerator to be 100% compatible
+#
+#Requires: <usuallyemptlylist>
+# For a real accelerator, also the old packge is required for compatibility
+# pls change this only if you know what you do
+Requires: %oldname
+
+#
+# Release under which to put the accelerator
+# e.g. 1 or higher
+#
+Release: 8.3
+
+### no changes needed below this line
+# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
### no changes needed
#
Name: %newname
Version: %newversion
-Release: 7
AutoReqProv: 0
Provides: %newname
-BuildRequires: rpm grep tar patchelf sed -rpmlint-Moblin -rpmlint-mini -post-build-checks
BuildRequires: %oldname
-Requires: %oldname
# no auto requirements - they're generated
License: %newlicense
Group: %newgroup
ExclusiveArch: %myexclusive
-Summary: Don't use! %newsummary
+Summary: Dont use %newsummary !
BuildRoot: %{_tmppath}/%{name}-%{version}-build
%if %binaries_to_prepare
Source10: binaries_to_prepare
echo ""
echo "[ .oO Preparing binaries Oo. ]"
echo ""
-mkdir %buildroot/%{_prefix}/share/applybinary/
+mkdir -p %buildroot/%{_prefix}/share/applybinary/
for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do
echo "Processing binary: $binary"
tmp="tmp.$$"
%else
debug="--debug"
%endif
- ldd $binary | grep -v "ld-linux" | grep -v "linux-gate" | sed -e "s#=.*##g" -e "s#^\t*##g" > $tmp
- deps=$(for i in `cat $tmp` ; do rpm -q --whatprovides "$i" | grep -v "no package"; done)
- cleandeps=$(echo "$cleandeps" "$deps" | sort | uniq | sed -e "s/-[0-9].*//g")
- patchelf $debug --set-rpath %newrpath %buildroot/$binary
- patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary
- patchelf $debug --set-rpath %newrpath %buildroot/$binary
- patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary
- if test -n "$debug"; then
- patchelf --print-rpath %buildroot/$binary
- patchelf --print-interpreter %buildroot/$binary
+ if file $binary | grep -q dynamic; then
+ ldd $binary | grep -v "ld-linux" | grep -v "linux-gate" | sed -e "s#=.*##g" -e "s#^\t*##g" > $tmp
+ deps=$(for i in `cat $tmp` ; do rpm -q --whatprovides "$i" | grep -v "no package"; done)
+ cleandeps=$(echo "$cleandeps" "$deps" | sort | uniq | sed -e "s/-[0-9].*//g")
+ patchelf $debug --set-rpath %newrpath %buildroot/$binary
+ patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary
+ patchelf $debug --set-rpath %newrpath %buildroot/$binary
+ patchelf $debug --set-interpreter %newinterpreter %buildroot/$binary
+ if test -n "$debug"; then
+ patchelf --print-rpath %buildroot/$binary
+ patchelf --print-interpreter %buildroot/$binary
+ fi
fi
echo "$binary" >> %buildroot/%{_prefix}/share/applybinary/%name
echo ""
%if %binaries_to_prepare
# Todo: error handling if .orig-arm is present
for binary in `cat %{_sourcedir}/binaries_to_prepare` ; do
- shellquote " targettype arm post \" if test -e ${binary}.orig-arm; then \" " >> /tmp/baselibs_new.conf
+ shellquote " targettype arm post \" if test -e ${binary}.orig-arm -a -h ${binary}; then \" " >> /tmp/baselibs_new.conf
shellquote " targettype arm post \" echo \"${binary}.orig-arm already present - skipping.\" \" " >> /tmp/baselibs_new.conf
shellquote " targettype arm post \" else \" " >> /tmp/baselibs_new.conf
shellquote " targettype arm post \" mv ${binary} ${binary}.orig-arm ; ln -s <prefix>${binary} ${binary} \"" >> /tmp/baselibs_new.conf
%if %binaries_to_prepare
/%{_prefix}/share/applybinary/%name
%endif
+%changelog
+* Fri Jul 6 2012 UkJung Kim <ujkim@samsung.com> - 1.0
+- Added and updated OBS-Accelerator-0.1.tar.bz2
+* Sun Apr 24 2011 Jan-Simon Möller <jsmoeller@linuxfoundation.org> - 1.0
+- Add baselibs.conf to src.rpm
+* Tue Jan 4 2011 Carsten Munk <carsten@maemo.org> - 1.0
+- Part of BMC#12113 (speedrpm implementation)
+- Add armv7hl and armv7nhl support
+- Initial version on meego.com (based off Jan-Simon Moller's other -x86 packages)
projects / toolchains / sqlite-x86.git / commitdiff