arm: dts: mediatek: add basic support for MT7629 SoC

This adds basic support for MT7629 reference board.

Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 9159fa2..ff5d6ae 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1262,6 +1262,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
        mt7623a-rfb-nand.dtb \
        mt7623n-rfb-emmc.dtb \
        mt7623n-bananapi-bpi-r2.dtb \
+       mt7629-rfb.dtb \
        mt8127-moose.dtb \
        mt8135-evbp1.dtb
 dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb

diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts
new file mode 100644 (file)
index 0000000..3621b7d
--- /dev/null
+++ b/arch/arm/boot/dts/mt7629-rfb.dts
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7629.dtsi"
+
+/ {
+       model = "MediaTek MT7629 reference board";
+       compatible = "mediatek,mt7629-rfb", "mediatek,mt7629";
+
+       aliases {
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+
+               reset {
+                       label = "factory";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+               };
+
+               wps {
+                       label = "wps";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&pio 58 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       memory@40000000 {
+               device_type = "memory";
+               reg = <0x40000000 0x10000000>;
+       };
+
+       reg_3p3v: regulator-3p3v {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-3.3V";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       reg_5v: regulator-5v {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-5V";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+};
+
+&eth {
+       pinctrl-names = "default";
+       pinctrl-0 = <&eth_pins>;
+       pinctrl-1 = <&ephy_leds_pins>;
+       status = "okay";
+
+       gmac1: mac@1 {
+               compatible = "mediatek,eth-mac";
+               reg = <1>;
+               phy-handle = <&phy0>;
+       };
+
+       mdio: mdio-bus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               phy0: ethernet-phy@0 {
+                       reg = <0>;
+                       phy-mode = "gmii";
+               };
+       };
+};
+
+&i2c {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c_pins>;
+       status = "okay";
+};
+
+&qspi {
+       pinctrl-names = "default";
+       pinctrl-0 = <&qspi_pins>;
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x00000 0x60000>;
+                               read-only;
+                       };
+
+                       partition@60000 {
+                               label = "u-boot-env";
+                               reg = <0x60000 0x10000>;
+                               read-only;
+                       };
+
+                       factory: partition@70000 {
+                               label = "factory";
+                               reg = <0x70000 0x40000>;
+                               read-only;
+                       };
+
+                       partition@b0000 {
+                               label = "kernel";
+                               reg = <0xb0000 0xb50000>;
+                       };
+               };
+       };
+};
+
+&pcie {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pcie_pins>;
+};
+
+&pciephy1 {
+       status = "okay";
+};
+
+&pio {
+       eth_pins: eth-pins {
+               mux {
+                       function = "eth";
+                       groups = "mdc_mdio";
+               };
+       };
+
+       ephy_leds_pins: ephy-leds-pins {
+               mux {
+                       function = "led";
+                       groups = "gphy_leds_0", "ephy_leds";
+               };
+       };
+
+       i2c_pins: i2c-pins {
+               mux {
+                       function = "i2c";
+                       groups =  "i2c_0";
+               };
+
+               conf {
+                       pins = "I2C_SDA", "I2C_SCL";
+                       drive-strength = <4>;
+                       bias-disable;
+               };
+       };
+
+       pcie_pins: pcie-pins {
+               mux {
+                       function = "pcie";
+                       groups = "pcie_clkreq",
+                                "pcie_pereset",
+                                "pcie_wake";
+               };
+       };
+
+       pwm_pins: pwm-pins {
+               mux {
+                       function = "pwm";
+                       groups = "pwm_0";
+               };
+       };
+
+       /* SPI-NOR is shared pin with serial NAND */
+       qspi_pins: qspi-pins {
+               mux {
+                       function = "flash";
+                       groups = "spi_nor";
+               };
+       };
+
+       /* Serial NAND is shared pin with SPI-NOR */
+       serial_nand_pins: serial-nand-pins {
+               mux {
+                       function = "flash";
+                       groups = "snfi";
+               };
+       };
+
+       spi_pins: spi-pins {
+               mux {
+                       function = "spi";
+                       groups = "spi_0";
+               };
+       };
+
+       uart0_pins: uart0-pins {
+               mux {
+                       function = "uart";
+                       groups = "uart0_txd_rxd" ;
+               };
+       };
+
+       uart1_pins: uart1-pins {
+               mux {
+                       function = "uart";
+                       groups = "uart1_0_tx_rx" ;
+               };
+       };
+
+       uart2_pins: uart2-pins {
+               mux {
+                       function = "uart";
+                       groups = "uart2_0_txd_rxd" ;
+               };
+       };
+
+       watchdog_pins: watchdog-pins {
+               mux {
+                       function = "watchdog";
+                       groups = "watchdog";
+               };
+       };
+};
+
+&spi {
+       pinctrl-names = "default";
+       pinctrl-0 = <&spi_pins>;
+       status = "okay";
+};
+
+&ssusb {
+       vusb33-supply = <&reg_3p3v>;
+       vbus-supply = <&reg_5v>;
+       status = "okay";
+};
+
+&u3phy0 {
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins>;
+       status = "okay";
+};
+
+&watchdog {
+       pinctrl-names = "default";
+       pinctrl-0 = <&watchdog_pins>;
+       status = "okay";
+};

diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi
new file mode 100644 (file)
index 0000000..9608bc2
--- /dev/null
+++ b/arch/arm/boot/dts/mt7629.dtsi
@@ -0,0 +1,481 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 MediaTek Inc.
+ *
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7629-clk.h>
+#include <dt-bindings/power/mt7622-power.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/mt7629-resets.h>
+
+/ {
+       compatible = "mediatek,mt7629";
+       interrupt-parent = <&sysirq>;
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               enable-method = "mediatek,mt6589-smp";
+
+               cpu0: cpu@0 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a7";
+                       reg = <0x0>;
+                       clock-frequency = <1250000000>;
+                       cci-control-port = <&cci_control2>;
+               };
+
+               cpu1: cpu@1 {
+                       device_type = "cpu";
+                       compatible = "arm,cortex-a7";
+                       reg = <0x1>;
+                       clock-frequency = <1250000000>;
+                       cci-control-port = <&cci_control2>;
+               };
+       };
+
+       pmu {
+               compatible = "arm,cortex-a7-pmu";
+               interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
+                            <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
+               interrupt-affinity = <&cpu0>, <&cpu1>;
+       };
+
+       clk20m: oscillator-0 {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <20000000>;
+               clock-output-names = "clk20m";
+       };
+
+       clk40m: oscillator-1 {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <40000000>;
+               clock-output-names = "clkxtal";
+       };
+
+       timer {
+               compatible = "arm,armv7-timer";
+               interrupt-parent = <&gic>;
+               interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+                            <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+                            <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+                            <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+               clock-frequency = <20000000>;
+       };
+
+       soc {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               infracfg: syscon@10000000 {
+                       compatible = "mediatek,mt7629-infracfg", "syscon";
+                       reg = <0x10000000 0x1000>;
+                       #clock-cells = <1>;
+               };
+
+               pericfg: syscon@10002000 {
+                       compatible = "mediatek,mt7629-pericfg", "syscon";
+                       reg = <0x10002000 0x1000>;
+                       #clock-cells = <1>;
+               };
+
+               scpsys: scpsys@10006000 {
+                       compatible = "mediatek,mt7629-scpsys",
+                                    "mediatek,mt7622-scpsys";
+                       #power-domain-cells = <1>;
+                       reg = <0x10006000 0x1000>;
+                       clocks = <&topckgen CLK_TOP_HIF_SEL>;
+                       clock-names = "hif_sel";
+                       assigned-clocks = <&topckgen CLK_TOP_HIF_SEL>;
+                       assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
+                       infracfg = <&infracfg>;
+               };
+
+               timer: timer@10009000 {
+                       compatible = "mediatek,mt7629-timer",
+                                    "mediatek,mt6765-timer";
+                       reg = <0x10009000 0x60>;
+                       interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&clk20m>;
+                       clock-names = "clk20m";
+               };
+
+               sysirq: interrupt-controller@10200a80 {
+                       compatible = "mediatek,mt7629-sysirq",
+                                    "mediatek,mt6577-sysirq";
+                       reg = <0x10200a80 0x20>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+                       interrupt-parent = <&gic>;
+               };
+
+               apmixedsys: syscon@10209000 {
+                       compatible = "mediatek,mt7629-apmixedsys", "syscon";
+                       reg = <0x10209000 0x1000>;
+                       #clock-cells = <1>;
+               };
+
+               rng: rng@1020f000 {
+                       compatible = "mediatek,mt7629-rng",
+                                    "mediatek,mt7623-rng";
+                       reg = <0x1020f000 0x100>;
+                       clocks = <&infracfg CLK_INFRA_TRNG_PD>;
+                       clock-names = "rng";
+               };
+
+               topckgen: syscon@10210000 {
+                       compatible = "mediatek,mt7629-topckgen", "syscon";
+                       reg = <0x10210000 0x1000>;
+                       #clock-cells = <1>;
+               };
+
+               watchdog: watchdog@10212000 {
+                       compatible = "mediatek,mt7629-wdt",
+                                    "mediatek,mt6589-wdt";
+                       reg = <0x10212000 0x100>;
+               };
+
+               pio: pinctrl@10217000 {
+                       compatible = "mediatek,mt7629-pinctrl";
+                       reg = <0x10217000 0x8000>,
+                             <0x10005000 0x1000>;
+                       reg-names = "base", "eint";
+                       gpio-controller;
+                       gpio-ranges = <&pio 0 0 79>;
+                       #gpio-cells = <2>;
+                       #interrupt-cells = <2>;
+                       interrupt-controller;
+                       interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-parent = <&gic>;
+               };
+
+               gic: interrupt-controller@10300000 {
+                       compatible = "arm,gic-400";
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+                       interrupt-parent = <&gic>;
+                       reg = <0x10310000 0x1000>,
+                             <0x10320000 0x1000>,
+                             <0x10340000 0x2000>,
+                             <0x10360000 0x2000>;
+               };
+
+               cci: cci@10390000 {
+                       compatible = "arm,cci-400";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       reg = <0x10390000 0x1000>;
+                       ranges = <0 0x10390000 0x10000>;
+
+                       cci_control0: slave-if@1000 {
+                               compatible = "arm,cci-400-ctrl-if";
+                               interface-type = "ace-lite";
+                               reg = <0x1000 0x1000>;
+                       };
+
+                       cci_control1: slave-if@4000 {
+                               compatible = "arm,cci-400-ctrl-if";
+                               interface-type = "ace";
+                               reg = <0x4000 0x1000>;
+                       };
+
+                       cci_control2: slave-if@5000 {
+                               compatible = "arm,cci-400-ctrl-if";
+                               interface-type = "ace";
+                               reg = <0x5000 0x1000>;
+                       };
+
+                       pmu@9000 {
+                               compatible = "arm,cci-400-pmu,r1";
+                               reg = <0x9000 0x5000>;
+                               interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+                       };
+               };
+
+               uart0: serial@11002000 {
+                       compatible = "mediatek,mt7629-uart",
+                                    "mediatek,mt6577-uart";
+                       reg = <0x11002000 0x400>;
+                       interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+                       clocks = <&topckgen CLK_TOP_UART_SEL>,
+                                <&pericfg CLK_PERI_UART0_PD>;
+                       clock-names = "baud", "bus";
+                       status = "disabled";
+               };
+
+               uart1: serial@11003000 {
+                       compatible = "mediatek,mt7629-uart",
+                                    "mediatek,mt6577-uart";
+                       reg = <0x11003000 0x400>;
+                       interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
+                       clocks = <&topckgen CLK_TOP_UART_SEL>,
+                                <&pericfg CLK_PERI_UART1_PD>;
+                       clock-names = "baud", "bus";
+                       status = "disabled";
+               };
+
+               uart2: serial@11004000 {
+                       compatible = "mediatek,mt7629-uart",
+                                    "mediatek,mt6577-uart";
+                       reg = <0x11004000 0x400>;
+                       interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
+                       clocks = <&topckgen CLK_TOP_UART_SEL>,
+                                <&pericfg CLK_PERI_UART2_PD>;
+                       clock-names = "baud", "bus";
+                       status = "disabled";
+               };
+
+               i2c: i2c@11007000 {
+                       compatible = "mediatek,mt7629-i2c",
+                                    "mediatek,mt2712-i2c";
+                       reg = <0x11007000 0x90>,
+                             <0x11000100 0x80>;
+                       interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+                       clock-div = <4>;
+                       clocks = <&pericfg CLK_PERI_I2C0_PD>,
+                                <&pericfg CLK_PERI_AP_DMA_PD>;
+                       clock-names = "main", "dma";
+                       assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
+                       assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
+               spi: spi@1100a000 {
+                       compatible = "mediatek,mt7629-spi",
+                                    "mediatek,mt7622-spi";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0x1100a000 0x100>;
+                       interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
+                       clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
+                                <&topckgen CLK_TOP_SPI0_SEL>,
+                                <&pericfg CLK_PERI_SPI0_PD>;
+                       clock-names = "parent-clk", "sel-clk", "spi-clk";
+                       status = "disabled";
+               };
+
+               qspi: spi@11014000 {
+                       compatible = "mediatek,mt7629-nor",
+                                    "mediatek,mt8173-nor";
+                       reg = <0x11014000 0xe0>;
+                       clocks = <&pericfg CLK_PERI_FLASH_PD>,
+                                <&topckgen CLK_TOP_FLASH_SEL>;
+                       clock-names = "spi", "sf";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
+               ssusbsys: syscon@1a000000 {
+                       compatible = "mediatek,mt7629-ssusbsys", "syscon";
+                       reg = <0x1a000000 0x1000>;
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+               };
+
+               ssusb: usb@1a0c0000 {
+                       compatible = "mediatek,mt7629-xhci",
+                                    "mediatek,mtk-xhci";
+                       reg = <0x1a0c0000 0x01000>,
+                             <0x1a0c3e00 0x0100>;
+                       reg-names = "mac", "ippc";
+                       interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
+                       clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
+                                <&ssusbsys CLK_SSUSB_REF_EN>,
+                                <&ssusbsys CLK_SSUSB_MCU_EN>,
+                                <&ssusbsys CLK_SSUSB_DMA_EN>;
+                       clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
+                       assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>,
+                                         <&topckgen CLK_TOP_SATA_SEL>,
+                                         <&topckgen CLK_TOP_HIF_SEL>;
+                       assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>,
+                                                <&topckgen CLK_TOP_UNIVPLL2_D4>,
+                                                <&topckgen CLK_TOP_UNIVPLL1_D2>;
+                       power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
+                       phys = <&u2port0 PHY_TYPE_USB2>,
+                              <&u3port0 PHY_TYPE_USB3>;
+                       status = "disabled";
+               };
+
+               u3phy0: usb-phy@1a0c4000 {
+                       compatible = "mediatek,generic-tphy-v2";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0 0x1a0c4000 0xe00>;
+                       status = "disabled";
+
+                       u2port0: usb-phy@0 {
+                               reg = <0 0x700>;
+                               clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
+                               clock-names = "ref";
+                               #phy-cells = <1>;
+                               status = "okay";
+                       };
+
+                       u3port0: usb-phy@700 {
+                               reg = <0x700 0x700>;
+                               clocks = <&clk20m>;
+                               clock-names = "ref";
+                               #phy-cells = <1>;
+                               status = "okay";
+                       };
+               };
+
+               pciesys: syscon@1a100800 {
+                       compatible = "mediatek,mt7629-pciesys", "syscon";
+                       reg = <0x1a100800 0x1000>;
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+               };
+
+               pcie: pcie@1a140000 {
+                       compatible = "mediatek,mt7629-pcie";
+                       device_type = "pci";
+                       reg = <0x1a140000 0x1000>,
+                             <0x1a145000 0x1000>;
+                       reg-names = "subsys","port1";
+                       #address-cells = <3>;
+                       #size-cells = <2>;
+                       interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
+                                    <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+                       clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
+                                <&pciesys CLK_PCIE_P0_AHB_EN>,
+                                <&pciesys CLK_PCIE_P1_AUX_EN>,
+                                <&pciesys CLK_PCIE_P1_AXI_EN>,
+                                <&pciesys CLK_PCIE_P1_OBFF_EN>,
+                                <&pciesys CLK_PCIE_P1_PIPE_EN>;
+                       clock-names = "sys_ck1", "ahb_ck1",
+                                     "aux_ck1", "axi_ck1",
+                                     "obff_ck1", "pipe_ck1";
+                       assigned-clocks = <&topckgen CLK_TOP_SATA_SEL>,
+                                         <&topckgen CLK_TOP_AXI_SEL>,
+                                         <&topckgen CLK_TOP_HIF_SEL>;
+                       assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+                                                <&topckgen CLK_TOP_SYSPLL1_D2>,
+                                                <&topckgen CLK_TOP_UNIVPLL1_D2>;
+                       phys = <&pcieport1 PHY_TYPE_PCIE>;
+                       phy-names = "pcie-phy1";
+                       power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+                       bus-range = <0x00 0xff>;
+                       ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
+
+                       pcie1: pcie@1,0 {
+                               device_type = "pci";
+                               reg = <0x0800 0 0 0 0>;
+                               #address-cells = <3>;
+                               #size-cells = <2>;
+                               #interrupt-cells = <1>;
+                               ranges;
+                               num-lanes = <1>;
+                               interrupt-map-mask = <0 0 0 7>;
+                               interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+                                               <0 0 0 2 &pcie_intc1 1>,
+                                               <0 0 0 3 &pcie_intc1 2>,
+                                               <0 0 0 4 &pcie_intc1 3>;
+
+                               pcie_intc1: interrupt-controller {
+                                       interrupt-controller;
+                                       #address-cells = <0>;
+                                       #interrupt-cells = <1>;
+                               };
+                       };
+               };
+
+               pciephy1: pcie-phy@1a14a000 {
+                       compatible = "mediatek,generic-tphy-v2";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0 0x1a14a000 0x1000>;
+                       status = "disabled";
+
+                       pcieport1: port1phy@0 {
+                               reg = <0 0x1000>;
+                               clocks = <&clk20m>;
+                               clock-names = "ref";
+                               #phy-cells = <1>;
+                               status = "okay";
+                       };
+               };
+
+               ethsys: syscon@1b000000 {
+                       compatible = "mediatek,mt7629-ethsys", "syscon";
+                       reg = <0x1b000000 0x1000>;
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+               };
+
+               eth: ethernet@1b100000 {
+                       compatible = "mediatek,mt7629-eth","syscon";
+                       reg = <0x1b100000 0x20000>;
+                       interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
+                                    <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
+                                    <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
+                       clocks = <&topckgen CLK_TOP_ETH_SEL>,
+                                <&topckgen CLK_TOP_F10M_REF_SEL>,
+                                <&ethsys CLK_ETH_ESW_EN>,
+                                <&ethsys CLK_ETH_GP0_EN>,
+                                <&ethsys CLK_ETH_GP1_EN>,
+                                <&ethsys CLK_ETH_GP2_EN>,
+                                <&ethsys CLK_ETH_FE_EN>,
+                                <&sgmiisys0 CLK_SGMII_TX_EN>,
+                                <&sgmiisys0 CLK_SGMII_RX_EN>,
+                                <&sgmiisys0 CLK_SGMII_CDR_REF>,
+                                <&sgmiisys0 CLK_SGMII_CDR_FB>,
+                                <&sgmiisys1 CLK_SGMII_TX_EN>,
+                                <&sgmiisys1 CLK_SGMII_RX_EN>,
+                                <&sgmiisys1 CLK_SGMII_CDR_REF>,
+                                <&sgmiisys1 CLK_SGMII_CDR_FB>,
+                                <&apmixedsys CLK_APMIXED_SGMIPLL>,
+                                <&apmixedsys CLK_APMIXED_ETH2PLL>;
+                       clock-names = "ethif", "sgmiitop", "esw", "gp0", "gp1",
+                                     "gp2", "fe", "sgmii_tx250m", "sgmii_rx250m",
+                                     "sgmii_cdr_ref", "sgmii_cdr_fb",
+                                     "sgmii2_tx250m", "sgmii2_rx250m",
+                                     "sgmii2_cdr_ref", "sgmii2_cdr_fb",
+                                     "sgmii_ck", "eth2pll";
+                       assigned-clocks = <&topckgen CLK_TOP_ETH_SEL>,
+                                         <&topckgen CLK_TOP_F10M_REF_SEL>;
+                       assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>,
+                                                <&topckgen CLK_TOP_SGMIIPLL_D2>;
+                       power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
+                       mediatek,ethsys = <&ethsys>;
+                       mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
+                       mediatek,infracfg = <&infracfg>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       status = "disabled";
+               };
+
+               sgmiisys0: syscon@1b128000 {
+                       compatible = "mediatek,mt7629-sgmiisys", "syscon";
+                       reg = <0x1b128000 0x3000>;
+                       #clock-cells = <1>;
+                       mediatek,physpeed = "2500";
+               };
+
+               sgmiisys1: syscon@1b130000 {
+                       compatible = "mediatek,mt7629-sgmiisys", "syscon";
+                       reg = <0x1b130000 0x3000>;
+                       #clock-cells = <1>;
+                       mediatek,physpeed = "2500";
+               };
+       };
+};

diff --git a/include/dt-bindings/reset/mt7629-resets.h b/include/dt-bindings/reset/mt7629-resets.h
new file mode 100644 (file)
index 0000000..6bb8573
--- /dev/null
+++ b/include/dt-bindings/reset/mt7629-resets.h
@@ -0,0 +1,71 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ */
+
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT7629
+#define _DT_BINDINGS_RESET_CONTROLLER_MT7629
+
+/* INFRACFG resets */
+#define MT7629_INFRA_EMI_MPU_RST               0
+#define MT7629_INFRA_UART5_RST                 2
+#define MT7629_INFRA_CIRQ_EINT_RST             3
+#define MT7629_INFRA_APXGPT_RST                        4
+#define MT7629_INFRA_SCPSYS_RST                        5
+#define MT7629_INFRA_KP_RST                    6
+#define MT7629_INFRA_SPI1_RST                  7
+#define MT7629_INFRA_SPI4_RST                  8
+#define MT7629_INFRA_SYSTIMER_RST              9
+#define MT7629_INFRA_IRRX_RST                  10
+#define MT7629_INFRA_AO_BUS_RST                        16
+#define MT7629_INFRA_EMI_RST                   32
+#define MT7629_INFRA_APMIXED_RST               35
+#define MT7629_INFRA_MIPI_RST                  36
+#define MT7629_INFRA_TRNG_RST                  37
+#define MT7629_INFRA_SYSCIRQ_RST               38
+#define MT7629_INFRA_MIPI_CSI_RST              39
+#define MT7629_INFRA_GCE_FAXI_RST              40
+#define MT7629_INFRA_I2C_SRAM_RST              41
+#define MT7629_INFRA_IOMMU_RST                 47
+
+/* PERICFG resets */
+#define MT7629_PERI_UART0_SW_RST               0
+#define MT7629_PERI_UART1_SW_RST               1
+#define MT7629_PERI_UART2_SW_RST               2
+#define MT7629_PERI_BTIF_SW_RST                        6
+#define MT7629_PERI_PWN_SW_RST                 8
+#define MT7629_PERI_DMA_SW_RST                 11
+#define MT7629_PERI_NFI_SW_RST                 14
+#define MT7629_PERI_I2C0_SW_RST                        22
+#define MT7629_PERI_SPI0_SW_RST                        33
+#define MT7629_PERI_SPI1_SW_RST                        34
+#define MT7629_PERI_FLASHIF_SW_RST             36
+
+/* PCIe Subsystem resets */
+#define MT7629_PCIE1_CORE_RST                  19
+#define MT7629_PCIE1_MMIO_RST                  20
+#define MT7629_PCIE1_HRST                      21
+#define MT7629_PCIE1_USER_RST                  22
+#define MT7629_PCIE1_PIPE_RST                  23
+#define MT7629_PCIE0_CORE_RST                  27
+#define MT7629_PCIE0_MMIO_RST                  28
+#define MT7629_PCIE0_HRST                      29
+#define MT7629_PCIE0_USER_RST                  30
+#define MT7629_PCIE0_PIPE_RST                  31
+
+/* SSUSB Subsystem resets */
+#define MT7629_SSUSB_PHY_PWR_RST               3
+#define MT7629_SSUSB_MAC_PWR_RST               4
+
+/* ETH Subsystem resets */
+#define MT7629_ETHSYS_SYS_RST                  0
+#define MT7629_ETHSYS_MCM_RST                  2
+#define MT7629_ETHSYS_HSDMA_RST                        5
+#define MT7629_ETHSYS_FE_RST                   6
+#define MT7629_ETHSYS_ESW_RST                  16
+#define MT7629_ETHSYS_GMAC_RST                 23
+#define MT7629_ETHSYS_EPHY_RST                 24
+#define MT7629_ETHSYS_CRYPTO_RST               29
+#define MT7629_ETHSYS_PPE_RST                  31
+
+#endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT7629 */