USB: ezusb: add support for Cypress FX2LP

This Patch adds support for the newer Cypress FX2LP. It also adapts
three drivers currently using ezusb to the interface change. (whiteheat
and keyspan[_pda])

Signed-off-by: René Bürgel <rene.buergel@sohard.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c
index a9b5263..bc3076f 100644 (file)
--- a/drivers/usb/serial/ezusb.c
+++ b/drivers/usb/serial/ezusb.c
@@ -14,11 +14,25 @@
 #include <linux/module.h>
 #include <linux/usb.h>
 
-/* EZ-USB Control and Status Register.  Bit 0 controls 8051 reset */
-#define CPUCS_REG    0x7F92
+struct ezusb_fx_type {
+       /* EZ-USB Control and Status Register.  Bit 0 controls 8051 reset */
+       unsigned short cpucs_reg;
+       unsigned short max_internal_adress;
+};
 
-/* Command for writing to internal memory */
+struct ezusb_fx_type ezusb_fx1 = {
+       .cpucs_reg = 0x7F92,
+       .max_internal_adress = 0x1B3F,
+};
+
+struct ezusb_fx_type ezusb_fx2 = {
+       .cpucs_reg = 0xE600,
+       .max_internal_adress = 0x3FFF,
+};
+
+/* Commands for writing to memory */
 #define WRITE_INT_RAM 0xA0
+#define WRITE_EXT_RAM 0xA3
 
 int ezusb_writememory(struct usb_device *dev, int address,
                                unsigned char *data, int length, __u8 request)
@@ -44,13 +58,24 @@ int ezusb_writememory(struct usb_device *dev, int address,
 }
 EXPORT_SYMBOL_GPL(ezusb_writememory);
 
-int ezusb_set_reset(struct usb_device *dev, unsigned char reset_bit)
+int ezusb_set_reset(struct usb_device *dev, unsigned short cpucs_reg,
+                        unsigned char reset_bit)
 {
-       int response = ezusb_writememory(dev, CPUCS_REG, &reset_bit, 1, WRITE_INT_RAM);
+       int response = ezusb_writememory(dev, cpucs_reg, &reset_bit, 1, WRITE_INT_RAM);
        if (response < 0)
                dev_err(&dev->dev, "%s-%d failed: %d\n",
                                                __func__, reset_bit, response);
        return response;
 }
-EXPORT_SYMBOL_GPL(ezusb_set_reset);
 
+int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit)
+{
+       return ezusb_set_reset(dev, ezusb_fx1.cpucs_reg, reset_bit);
+}
+EXPORT_SYMBOL_GPL(ezusb_fx1_set_reset);
+
+int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit)
+{
+       return ezusb_set_reset(dev, ezusb_fx2.cpucs_reg, reset_bit);
+}
+EXPORT_SYMBOL_GPL(ezusb_fx2_set_reset);

diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 566056c..4f25849 100644 (file)
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -43,6 +43,7 @@
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/usb/ezusb.h>
 #include "keyspan.h"
 
 /*
@@ -1245,7 +1246,7 @@ static int keyspan_fake_startup(struct usb_serial *serial)
        dev_dbg(&serial->dev->dev, "Uploading Keyspan %s firmware.\n", fw_name);
 
                /* download the firmware image */
-       response = ezusb_set_reset(serial->dev, 1);
+       response = ezusb_fx1_set_reset(serial->dev, 1);
 
        record = (const struct ihex_binrec *)fw->data;
 
@@ -1264,7 +1265,7 @@ static int keyspan_fake_startup(struct usb_serial *serial)
        release_firmware(fw);
                /* bring device out of reset. Renumeration will occur in a
                   moment and the new device will bind to the real driver */
-       response = ezusb_set_reset(serial->dev, 0);
+       response = ezusb_fx1_set_reset(serial->dev, 0);
 
        /* we don't want this device to have a driver assigned to it. */
        return 1;

diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 124d4e5..39ab668 100644 (file)
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -30,6 +30,7 @@
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
+#include <linux/usb/ezusb.h>
 
 /* make a simple define to handle if we are compiling keyspan_pda or xircom support */
 #if defined(CONFIG_USB_SERIAL_KEYSPAN_PDA) || defined(CONFIG_USB_SERIAL_KEYSPAN_PDA_MODULE)
@@ -678,7 +679,7 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial)
        const struct firmware *fw;
 
        /* download the firmware here ... */
-       response = ezusb_set_reset(serial->dev, 1);
+       response = ezusb_fx1_set_reset(serial->dev, 1);
 
        if (0) { ; }
 #ifdef KEYSPAN
@@ -718,7 +719,7 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial)
        release_firmware(fw);
        /* bring device out of reset. Renumeration will occur in a moment
           and the new device will bind to the real driver */
-       response = ezusb_set_reset(serial->dev, 0);
+       response = ezusb_fx1_set_reset(serial->dev, 0);
 
        /* we want this device to fail to have a driver assigned to it. */
        return 1;

diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 80555fc..8172ea3 100644 (file)
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -32,6 +32,7 @@
 #include <linux/serial_reg.h>
 #include <linux/serial.h>
 #include <linux/usb/serial.h>
+#include <linux/usb/ezusb.h>
 #include <linux/firmware.h>
 #include <linux/ihex.h>
 #include "whiteheat.h"                 /* WhiteHEAT specific commands */
@@ -211,7 +212,7 @@ static int whiteheat_firmware_download(struct usb_serial *serial,
                goto out;
        }
        ret = 0;
-       response = ezusb_set_reset(serial->dev, 1);
+       response = ezusb_fx1_set_reset(serial->dev, 1);
 
        record = (const struct ihex_binrec *)loader_fw->data;
        while (record) {
@@ -228,7 +229,7 @@ static int whiteheat_firmware_download(struct usb_serial *serial,
                record = ihex_next_binrec(record);
        }
 
-       response = ezusb_set_reset(serial->dev, 0);
+       response = ezusb_fx1_set_reset(serial->dev, 0);
 
        record = (const struct ihex_binrec *)firmware_fw->data;
        while (record && be32_to_cpu(record->addr) < 0x1b40)
@@ -248,7 +249,7 @@ static int whiteheat_firmware_download(struct usb_serial *serial,
                ++record;
        }
 
-       response = ezusb_set_reset(serial->dev, 1);
+       response = ezusb_fx1_set_reset(serial->dev, 1);
 
        record = (const struct ihex_binrec *)firmware_fw->data;
        while (record && be32_to_cpu(record->addr) < 0x1b40) {
@@ -266,7 +267,7 @@ static int whiteheat_firmware_download(struct usb_serial *serial,
                ++record;
        }
        ret = 0;
-       response = ezusb_set_reset(serial->dev, 0);
+       response = ezusb_fx1_set_reset(serial->dev, 0);
  out:
        release_firmware(loader_fw);
        release_firmware(firmware_fw);

diff --git a/include/linux/usb/ezusb.h b/include/linux/usb/ezusb.h
new file mode 100644 (file)
index 0000000..fc618d8
--- /dev/null
+++ b/include/linux/usb/ezusb.h
@@ -0,0 +1,16 @@
+#ifndef __EZUSB_H
+#define __EZUSB_H
+
+
+extern int ezusb_writememory(struct usb_device *dev, int address,
+                            unsigned char *data, int length, __u8 bRequest);
+
+extern int ezusb_fx1_set_reset(struct usb_device *dev, unsigned char reset_bit);
+extern int ezusb_fx2_set_reset(struct usb_device *dev, unsigned char reset_bit);
+
+extern int ezusb_fx1_ihex_firmware_download(struct usb_device *dev,
+                                           const char *firmware_path);
+extern int ezusb_fx2_ihex_firmware_download(struct usb_device *dev,
+                                           const char *firmware_path);
+
+#endif /* __EZUSB_H */

diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 5808713..ef9be7e 100644 (file)
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -301,10 +301,6 @@ extern void usb_serial_port_softint(struct usb_serial_port *port);
 extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message);
 extern int usb_serial_resume(struct usb_interface *intf);
 
-extern int ezusb_writememory(struct usb_device *dev, int address,
-                            unsigned char *data, int length, __u8 bRequest);
-extern int ezusb_set_reset(struct usb_device *dev, unsigned char reset_bit);
-
 /* USB Serial console functions */
 #ifdef CONFIG_USB_SERIAL_CONSOLE
 extern void usb_serial_console_init(int minor);