#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Generator script for a dracut initramfs
# Tries to retain some degree of compatibility with the command line
# of the various mkinitrd implementations out there
#
-# Copyright 2005-2009 Red Hat, Inc. All rights reserved.
+# Copyright 2005-2010 Red Hat, Inc. All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
usage() {
# 80x25 linebreak here ^
- echo "Usage: $0 [OPTION]... <initramfs> <kernel-version>
+ cat << EOF
+Usage: $0 [OPTION]... <initramfs> <kernel-version>
Creates initial ramdisk images for preloading modules
-f, --force Overwrite existing initramfs file.
--no-kernel Do not install kernel drivers and firmware files
--ignore-kernel-modules
Don't try to load modules. It automatically implies
- '--no-kernel'. It's assumed that everything needed
- is built into kernel.
+ '--no-kernel'. It's assumed that everything needed
+ is built into kernel.
--strip Strip binaries in the initramfs
--nostrip Do not strip binaries in the initramfs (default)
--mdadmconf Include local /etc/mdadm.conf
--nomdadmconf Do not include local /etc/mdadm.conf
--lvmconf Include local /etc/lvm/lvm.conf
- --nolvmconf Do not include local /etc/lvm/lvm.conf
+ --nolvmconf Do not include local /etc/lvm/lvm.conf
-h, --help This message
--debug Output debug information of the build process
-v, --verbose Verbose output during the build process
-c, --conf [FILE] Specify configuration file to use.
Default: /etc/dracut.conf
- --confdir [DIR] Specify configuration directory to use *.conf files from.
- Default: /etc/dracut.conf.d
+ --confdir [DIR] Specify configuration directory to use *.conf files
+ from. Default: /etc/dracut.conf.d
-l, --local Local mode. Use modules from the current working
directory instead of the system-wide installed in
/usr/share/dracut/modules.d.
-I, --install [LIST] Install the space separated list of files into the
initramfs.
--gzip Compress the generated initramfs using gzip.
- This will be done by default, unless another
- compression option or --no-compress is passed.
+ This will be done by default, unless another
+ compression option or --no-compress is passed.
--bzip2 Compress the generated initramfs using bzip2.
- Make sure your kernel has bzip2 decompression support
- compiled in, otherwise you will not be able to boot.
- --lzma Compress the generated initramfs using lzma.
- Make sure your kernel has lzma support compiled in,
- otherwise you will not be able to boot.
+ Make sure your kernel has bzip2 decompression support
+ compiled in, otherwise you will not be able to boot.
+ --lzma Compress the generated initramfs using lzma.
+ Make sure your kernel has lzma support compiled in,
+ otherwise you will not be able to boot.
--no-compress Do not compress the generated initramfs. This will
- override any other compression options.
-"
+ override any other compression options.
+EOF
}
# Little helper function for reading args from the commandline.
# $3 = arg parameter
local rematch='^[^=]*=(.*)$'
if [[ $2 =~ $rematch ]]; then
- read "$1" <<< "${BASH_REMATCH[1]}"
+ read "$1" <<< "${BASH_REMATCH[1]}"
else
- read "$1" <<< "$3"
- # There is no way to shift our callers args, so
- # return 1 to indicate they should do it instead.
- return 1
+ read "$1" <<< "$3"
+ # There is no way to shift our callers args, so
+ # return 1 to indicate they should do it instead.
+ return 1
fi
}
while (($# > 0)); do
case ${1%%=*} in
- -m|--modules) read_arg dracutmodules_l "$@" || shift;;
- -o|--omit) read_arg omit_dracutmodules_l "$@" || shift;;
- -a|--add) read_arg add_dracutmodules_l "$@" || shift;;
- -d|--drivers) read_arg drivers_l "$@" || shift;;
- --add-drivers) read_arg add_drivers_l "$@" || shift;;
- --filesystems) read_arg filesystems_l "$@" || shift;;
- -k|--kmoddir) read_arg drivers_dir_l "$@" || shift;;
- -c|--conf) read_arg conffile "$@" || shift;;
- --confdir) read_arg confdir "$@" || shift;;
- -I|--install) read_arg install_items "$@" || shift;;
- --fwdir) read_arg fw_dir_l "$@" || shift;;
- -f|--force) force=yes;;
- --kernel-only) kernel_only="yes"; no_kernel="no";;
- --no-kernel) kernel_only="no"; no_kernel="yes";;
- --strip) do_strip_l="yes";;
- --nostrip) do_strip_l="no";;
+ -m|--modules) read_arg dracutmodules_l "$@" || shift;;
+ -o|--omit) read_arg omit_dracutmodules_l "$@" || shift;;
+ -a|--add) read_arg add_dracutmodules_l "$@" || shift;;
+ -d|--drivers) read_arg drivers_l "$@" || shift;;
+ --add-drivers) read_arg add_drivers_l "$@" || shift;;
+ --filesystems) read_arg filesystems_l "$@" || shift;;
+ -k|--kmoddir) read_arg drivers_dir_l "$@" || shift;;
+ -c|--conf) read_arg conffile "$@" || shift;;
+ --confdir) read_arg confdir "$@" || shift;;
+ -I|--install) read_arg install_items "$@" || shift;;
+ --fwdir) read_arg fw_dir_l "$@" || shift;;
+ -f|--force) force=yes;;
+ --kernel-only) kernel_only="yes"; no_kernel="no";;
+ --no-kernel) kernel_only="no"; no_kernel="yes";;
+ --strip) do_strip_l="yes";;
+ --nostrip) do_strip_l="no";;
--mdadmconf) mdadmconf_l="yes";;
--nomdadmconf) mdadmconf_l="no";;
--lvmconf) lvmconf_l="yes";;
--nolvmconf) lvmconf_l="no";;
- --debug) debug="yes";;
- -v|--verbose) beverbose="yes";;
- -l|--local) allowlocal="yes" ;;
- -H|--hostonly) hostonly_l="yes" ;;
- --fstab) use_fstab_l="yes" ;;
- -h|--help) usage; exit 1 ;;
- -i|--include) include_src="$2"; include_target="$3"; shift 2;;
+ --debug) debug="yes";;
+ -v|--verbose) beverbose="yes";;
+ -l|--local) allowlocal="yes" ;;
+ -H|--hostonly) hostonly_l="yes" ;;
+ --fstab) use_fstab_l="yes" ;;
+ -h|--help) usage; exit 1 ;;
+ -i|--include) include_src="$2"; include_target="$3"; shift 2;;
--bzip2) [[ $compress != cat ]] && compress="bzip2 -9";;
--lzma) [[ $compress != cat ]] && compress="lzma -9";;
--no-compress) compress="cat";;
ignore_kmodules="yes"
omit_dracutmodules_l+=\ kernel-modules
;;
- -*) printf "\nUnknown option: %s\n\n" "$1" >&2; usage; exit 1;;
- *) break ;;
+ -*) printf "\nUnknown option: %s\n\n" "$1" >&2; usage; exit 1;;
+ *) break ;;
esac
shift
done
[[ $dracutbasedir ]] || dracutbasedir=/usr/share/dracut
-[[ $allowlocal && -f "$(readlink -f ${0%/*})/dracut-functions" ]] && dracutbasedir="${0%/*}"
+[[ $allowlocal && -f "$(readlink -f ${0%/*})/dracut-functions" ]] && \
+ dracutbasedir="${0%/*}"
# if we were not passed a config file, try the default one
if [[ ! -f $conffile ]]; then
# source our config dir
if [[ $confdir && -d $confdir ]]; then
for f in "$confdir"/*.conf; do
- [[ -e $f ]] && . "$f"
+ [[ -e $f ]] && . "$f"
done
fi
[[ $compress ]] || compress="gzip -9"
if [[ -f $dracutbasedir/dracut-functions ]]; then
- . $dracutbasedir/dracut-functions
+ . $dracutbasedir/dracut-functions
else
- echo "Cannot find $dracutbasedir/dracut-functions. Are you running from a git checkout?"
- echo "Try passing -l as an argument to $0"
- exit 1
+ echo "Cannot find $dracutbasedir/dracut-functions."
+ echo "Are you running from a git checkout?"
+ echo "Try passing -l as an argument to $0"
+ exit 1
fi
dracutfunctions=$dracutbasedir/dracut-functions
exit 1
fi
-hookdirs="cmdline pre-udev pre-trigger netroot pre-mount pre-pivot mount emergency"
+hookdirs="cmdline pre-udev pre-trigger netroot pre-mount"
+hookdirs+=" pre-pivot mount emergency"
[[ $TMPDIR && ! -w $TMPDIR ]] && unset TMPDIR
readonly initdir=$(mktemp -d -t initramfs.XXXXXX)
-trap 'ret=$?;rm -rf "$initdir";exit $ret;' EXIT # clean up after ourselves no matter how we die.
-trap 'exit 1;' SIGINT # clean up after ourselves no matter how we die.
+# clean up after ourselves no matter how we die.
+trap 'ret=$?;rm -rf "$initdir";exit $ret;' EXIT
+# clean up after ourselves no matter how we die.
+trap 'exit 1;' SIGINT
# Need to be able to have non-root users read stuff (rpcbind etc)
chmod 755 "$initdir"
if [[ $kernel_only != yes ]]; then
# Create some directory structure first
- for d in bin sbin usr/bin usr/sbin usr/lib etc proc sys sysroot tmp dev/pts var/run; do
- inst_dir "/$d";
+ for d in bin sbin usr/bin usr/sbin usr/lib etc \
+ proc sys sysroot tmp dev/pts var/run; do
+ inst_dir "/$d";
done
fi
# check all our modules to see if they should be sourced.
# This builds a list of modules that we will install next.
check_modules
-
+
# source our modules.
for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
mod=${moddir##*/}; mod=${mod#[0-9][0-9]}
if strstr "$mods_to_load" " $mod "; then
- dinfo "*** Sourcing module $mod"
- if [[ $kernel_only = yes ]]; then
- [[ -x $moddir/installkernel ]] && . "$moddir/installkernel"
- else
- . "$moddir/install"
- if [[ $no_kernel != yes && -x $moddir/installkernel ]]; then
- . "$moddir/installkernel"
- fi
- fi
- mods_to_load=${mods_to_load// $mod /}
+ dinfo "*** Sourcing module $mod"
+ if [[ $kernel_only = yes ]]; then
+ [[ -x $moddir/installkernel ]] && . "$moddir/installkernel"
+ else
+ . "$moddir/install"
+ if [[ $no_kernel != yes && -x $moddir/installkernel ]]; then
+ . "$moddir/installkernel"
+ fi
+ fi
+ mods_to_load=${mods_to_load// $mod /}
fi
done
unset moddir
fi
for item in $install_items; do
- dracut_install "$item"
+ dracut_install "$item"
done
unset item
# make sure that library links are correct and up to date
cp -ar /etc/ld.so.conf* "$initdir"/etc
-ldconfig -r "$initdir" || [[ $UID != "0" ]] && dinfo "ldconfig might need uid=0 (root) for chroot()"
+ldconfig -r "$initdir" || [[ $UID != "0" ]] && \
+ dinfo "ldconfig might need uid=0 (root) for chroot()"
[[ $beverbose = yes ]] && (du -c "$initdir" | sort -n)
# strip binaries
if [[ $do_strip = yes ]] ; then
for p in strip grep find; do
- if ! type -P $p >/dev/null; then
- derror "Could not find '$p'. You should run $0 with '--nostrip'."
- do_strip=no
- fi
+ if ! type -P $p >/dev/null; then
+ derror "Could not find '$p'. You should run $0 with '--nostrip'."
+ do_strip=no
+ fi
done
fi
if [[ $do_strip = yes ]] ; then
- for f in $(find "$initdir" -type f \( -perm -0100 -or -perm -0010 -or -perm -0001 -or -path '*/lib/modules/*.ko' \) ); do
- dinfo "Stripping $f"
- strip -g "$f" 2>/dev/null|| :
- #
- # FIXME: only strip -g for now
- #
- #strip -g --strip-unneeded "$f" || :
- #note="-R .note"
- #if objdump -h $f | grep '^[ ]*[0-9]*[ ]*.note[ ]' -A 1 | \
- # grep -q ALLOC; then
- # note=
- #fi
- #strip -R .comment $note "$f" || :
+ for f in $(find "$initdir" -type f \
+ \( -perm -0100 -or -perm -0010 -or -perm -0001 \
+ -or -path '*/lib/modules/*.ko' \) ); do
+ dinfo "Stripping $f"
+ strip -g "$f" 2>/dev/null|| :
done
fi
type hardlink &>/dev/null && {
- hardlink "$initdir" 2>&1
+ hardlink "$initdir" 2>&1
}
if ! ( cd "$initdir"; find . |cpio -R 0:0 -H newc -o --quiet | \
#!/bin/bash --norc
-
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+#
# Copyright 2009 Red Hat, Inc. All rights reserved.
#
# This program is free software; you can redistribute it and/or modify
usage() {
# 80x25 linebreak here ^
- echo "Usage: $0 [OPTION]... <initramfs> <base image> [<image>...]
+ cat << EOF
+Usage: $0 [OPTION]... <initramfs> <base image> [<image>...]
Creates initial ramdisk image by concatenating several images from the command
line and /boot/dracut/
-h, --help This message
--debug Output debug information of the build process
-v, --verbose Verbose output during the build process
-"
+EOF
}
while (($# > 0)); do
case $1 in
- -f|--force) force=yes;;
- -i|--imagedir) imagedir=$2;shift;;
- -o|--overlaydir) overlay=$2;shift;;
- --nooverlay) no_overlay=yes;shift;;
- --noimagedir) no_imagedir=yes;shift;;
- -h|--help) usage; exit 1 ;;
- --debug) debug="yes";;
- -v|--verbose) beverbose="yes";;
- -*) printf "\nUnknown option: %s\n\n" "$1" >&2; usage; exit 1;;
- *) break ;;
+ -f|--force) force=yes;;
+ -i|--imagedir) imagedir=$2;shift;;
+ -o|--overlaydir) overlay=$2;shift;;
+ --nooverlay) no_overlay=yes;shift;;
+ --noimagedir) no_imagedir=yes;shift;;
+ -h|--help) usage; exit 1 ;;
+ --debug) debug="yes";;
+ -v|--verbose) beverbose="yes";;
+ -*) printf "\nUnknown option: %s\n\n" "$1" >&2; usage; exit 1;;
+ *) break ;;
esac
shift
done
if [[ ! $no_imagedir ]]; then
for i in "$imagedir/"*.img; do
- [[ -f $i ]] && images+=("$i")
+ [[ -f $i ]] && images+=("$i")
done
fi
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# functions used by dracut and other tools.
#
# Log initrd creation.
if ! [[ $dracutlogfile ]]; then
[[ $dracutbasedir = /usr/share/dracut ]] && \
- dracutlogfile=/var/log/dracut.log || \
- dracutlogfile=/tmp/dracut.log
+ dracutlogfile=/var/log/dracut.log || \
+ dracutlogfile=/tmp/dracut.log
# [[ -w $dracutlogfile ]] || dracutlogfile=/tmp/dracut.log
if [[ -w $dracutlogfile ]]; then
>"$dracutlogfile"
[[ $ID_FS_TYPE ]] && return
if [[ -x /lib/udev/vol_id ]]; then
- eval $(/lib/udev/vol_id --export $1)
+ eval $(/lib/udev/vol_id --export $1)
elif find_binary blkid >/dev/null; then
- eval $(blkid -o udev $1)
+ eval $(blkid -o udev $1)
else
- return 1
+ return 1
fi
}
get_fs_type() (
[[ $1 ]] || return
if [[ $1 != ${1#/dev/block/nfs:} ]] \
- || [[ $1 != ${1#/dev/block/nfs3:} ]] \
- || [[ $1 != ${1#/dev/block/nfs4:} ]]; then
- echo "nfs"
- return
+ || [[ $1 != ${1#/dev/block/nfs3:} ]] \
+ || [[ $1 != ${1#/dev/block/nfs4:} ]]; then
+ echo "nfs"
+ return
fi
get_fs_env $1 || return
echo $ID_FS_TYPE
# finds the major:minor of the block device backing the root filesystem.
find_block_device() {
local x mpt majmin dev fs misc maj min
- if [[ $use_fstab != yes ]]; then
- while read x x majmin x mpt x x fs misc; do
+ if [[ $use_fstab != yes ]]; then
+ while read x x majmin x mpt x x fs misc; do
[[ $fs = nfs ]] && { echo $dev; return 0;}
[[ $fs = nfs3 ]] && { echo $dev; return 0;}
[[ $fs = nfs4 ]] && { echo $dev; return 0;}
- if [[ $mpt = $1 ]] && [[ ${majmin#0:} = $majmin ]]; then
- echo $majmin;
- return 0 # we have a winner!
- fi
- done < /proc/self/mountinfo
+ if [[ $mpt = $1 ]] && [[ ${majmin#0:} = $majmin ]]; then
+ echo $majmin;
+ return 0 # we have a winner!
+ fi
+ done < /proc/self/mountinfo
fi
# fall back to /etc/fstab
while read dev mpt fs misc; do
- if [[ $mpt = $1 ]]; then
+ if [[ $mpt = $1 ]]; then
[[ $fs = nfs ]] && { echo $dev; return 0;}
[[ $fs = nfs3 ]] && { echo $dev; return 0;}
[[ $fs = nfs4 ]] && { echo $dev; return 0;}
[[ $dev != ${dev#UUID=} ]] && dev=/dev/disk/by-uuid/${dev#UUID=}
[[ $dev != ${dev#LABEL=} ]] && dev=/dev/disk/by-label/${dev#LABEL=}
- [[ -b $dev ]] || return 1 # oops, not a block device.
- ls -nLl "$dev" | {
- read x x x x maj min x;
- maj=${maj//,/};
- echo $maj:$min;
- } && return 0
- fi
+ [[ -b $dev ]] || return 1 # oops, not a block device.
+ ls -nLl "$dev" | {
+ read x x x x maj min x;
+ maj=${maj//,/};
+ echo $maj:$min;
+ } && return 0
+ fi
done < /etc/fstab
return 1;
}
"$1" $2 && return
check_vol_slaves "$@" && return 0
if [[ -f /sys/dev/block/$2/../dev ]]; then
- check_block_and_slaves $1 $(cat "/sys/dev/block/$2/../dev") && return 0
+ check_block_and_slaves $1 $(cat "/sys/dev/block/$2/../dev") && return 0
fi
[[ -d /sys/dev/block/$2/slaves ]] || return 1
for x in /sys/dev/block/$2/slaves/*/dev; do
[[ -f $x ]] || continue
- check_block_and_slaves $1 $(cat "$x") && return 0
+ check_block_and_slaves $1 $(cat "$x") && return 0
done
return 1
}
# And the volume group might be bigger than the devices the LV needs.
check_vol_slaves() {
for i in /dev/mapper/*; do
- lv=$(get_numeric_dev $i)
- if [[ $lv = $2 ]]; then
- vg=$(lvm lvs --noheadings -o vg_name $i 2>/dev/null)
- # strip space
- vg=$(echo $vg)
- if [[ $vg ]]; then
- for pv in $(lvm vgs --noheadings -o pv_name "$vg" 2>/dev/null); \
- do
- check_block_and_slaves $1 $(get_numeric_dev $pv) \
- && return 0
- done
- fi
- fi
+ lv=$(get_numeric_dev $i)
+ if [[ $lv = $2 ]]; then
+ vg=$(lvm lvs --noheadings -o vg_name $i 2>/dev/null)
+ # strip space
+ vg=$(echo $vg)
+ if [[ $vg ]]; then
+ for pv in $(lvm vgs --noheadings -o pv_name "$vg" 2>/dev/null); \
+ do
+ check_block_and_slaves $1 $(get_numeric_dev $pv) \
+ && return 0
+ done
+ fi
+ fi
done
return 1
}
local src=$1 dest=${2:-$1} lib reallib symlink
[[ -e $initdir$dest ]] && return 0
if [[ -L $src ]]; then
- reallib=$(readlink -f "$src")
- lib=${src##*/}
- inst_simple "$reallib" "$reallib"
- inst_dir "${dest%/*}"
- (cd "${initdir}${dest%/*}" && ln -s "$reallib" "$lib")
+ reallib=$(readlink -f "$src")
+ lib=${src##*/}
+ inst_simple "$reallib" "$reallib"
+ inst_dir "${dest%/*}"
+ (cd "${initdir}${dest%/*}" && ln -s "$reallib" "$lib")
else
- inst_simple "$src" "$dest"
+ inst_simple "$src" "$dest"
fi
# Create additional symlinks. See rev_symlinks description.
local binpath="/bin /sbin /usr/bin /usr/sbin" p
[[ -z ${1##/*} && -x $1 ]] && { echo $1; return 0; }
for p in $binpath; do
- [[ -x $p/$1 ]] && { echo "$p/$1"; return 0; }
+ [[ -x $p/$1 ]] && { echo "$p/$1"; return 0; }
done
return 1
}
[[ -e $initdir$target ]] && return 0
# I love bash!
LC_ALL=C ldd $bin 2>/dev/null | while read line; do
- [[ $line = 'not a dynamic executable' ]] && return 1
- if [[ $line =~ not\ found ]]; then
- derror "Missing a shared library required by $bin."
- derror "Run \"ldd $bin\" to find out what it is."
- derror "dracut cannot create an initrd."
- exit 1
- fi
- so_regex='([^ ]*/lib[^/]*/[^ ]*\.so[^ ]*)'
- [[ $line =~ $so_regex ]] || continue
- FILE=${BASH_REMATCH[1]}
- [[ -e ${initdir}$FILE ]] && continue
- # see if we are loading an optimized version of a shared lib.
- lib_regex='^(/lib[^/]*).*'
- if [[ $FILE =~ $lib_regex ]]; then
+ [[ $line = 'not a dynamic executable' ]] && return 1
+ if [[ $line =~ not\ found ]]; then
+ derror "Missing a shared library required by $bin."
+ derror "Run \"ldd $bin\" to find out what it is."
+ derror "dracut cannot create an initrd."
+ exit 1
+ fi
+ so_regex='([^ ]*/lib[^/]*/[^ ]*\.so[^ ]*)'
+ [[ $line =~ $so_regex ]] || continue
+ FILE=${BASH_REMATCH[1]}
+ [[ -e ${initdir}$FILE ]] && continue
+ # see if we are loading an optimized version of a shared lib.
+ lib_regex='^(/lib[^/]*).*'
+ if [[ $FILE =~ $lib_regex ]]; then
TLIBDIR=${BASH_REMATCH[1]}
BASE=${FILE##*/}
- # prefer nosegneg libs, then unoptimized ones.
- for f in "$TLIBDIR/i686/nosegneg" "$TLIBDIR"; do
- [[ -e $f/$BASE ]] || continue
- FILE=$f/$BASE
- break
- done
- inst_library "$FILE" "$TLIBDIR/$BASE"
+ # prefer nosegneg libs, then unoptimized ones.
+ for f in "$TLIBDIR/i686/nosegneg" "$TLIBDIR"; do
+ [[ -e $f/$BASE ]] || continue
+ FILE=$f/$BASE
+ break
+ done
+ inst_library "$FILE" "$TLIBDIR/$BASE"
IF_dynamic=yes
- continue
- fi
- inst_library "$FILE"
+ continue
+ fi
+ inst_library "$FILE"
done
inst_simple "$bin" "$target"
}
find_rule() {
[[ -f $1 ]] && { echo "$1"; return 0; }
for r in . /lib/udev/rules.d /etc/udev/rules.d $dracutbasedir/rules.d; do
- [[ -f $r/$1 ]] && { echo "$r/$1"; return 0; }
+ [[ -f $r/$1 ]] && { echo "$r/$1"; return 0; }
done
return 1
}
case $# in
1) ;;
2) [[ ! $initdir && -d $2 ]] && export initdir=$2
- [[ $initdir = $2 ]] && set $1;;
+ [[ $initdir = $2 ]] && set $1;;
3) [[ -z $initdir ]] && export initdir=$2
- set $1 $3;;
+ set $1 $3;;
*) derror "inst only takes 1 or 2 or 3 arguments"
- exit 1;;
+ exit 1;;
esac
for x in inst_symlink inst_script inst_binary inst_simple; do
- $x "$@" && return 0
+ $x "$@" && return 0
done
return 1
}
# All hooks should be POSIX/SuS compliant, they will be sourced by init.
inst_hook() {
if ! [[ -f $3 ]]; then
- derror "Cannot install a hook ($3) that does not exist."
- derror "Aborting initrd creation."
- exit 1
+ derror "Cannot install a hook ($3) that does not exist."
+ derror "Aborting initrd creation."
+ exit 1
elif ! strstr "$hookdirs" "$1"; then
- derror "No such hook type $1. Aborting initrd creation."
- exit 1
+ derror "No such hook type $1. Aborting initrd creation."
+ exit 1
fi
inst_simple "$3" "/${1}/${2}${3##*/}"
}
dracut_install() {
if [[ $1 = '-o' ]]; then
- local optional=yes
- shift
+ local optional=yes
+ shift
fi
while (($# > 0)); do
- if ! inst "$1" ; then
- if [[ $optional = yes ]]; then
- dwarning "Skipping program $1 as it cannot be found and is flagged to be optional"
- else
- derror "Failed to install $1"
- exit 1
+ if ! inst "$1" ; then
+ if [[ $optional = yes ]]; then
+ dwarning "Skipping program $1 as it cannot be found and is flagged to be optional"
+ else
+ derror "Failed to install $1"
+ exit 1
fi
- fi
- shift
+ fi
+ shift
done
}
[[ -d $moddir && -x $moddir/install ]] || return 1
# if we do not have a check script, we are unconditionally included
if [[ -x $moddir/check ]]; then
- "$moddir/check"
+ "$moddir/check"
ret=$?
- # a return value of 255 = load module only as a dependency.
- ((ret==0||ret==255)) || return 1
- for dep in $("$moddir/check" -d); do
- check_module_deps "$dep" && continue
- dwarning "Dependency $mod failed."
- return 1
- done
+ # a return value of 255 = load module only as a dependency.
+ ((ret==0||ret==255)) || return 1
+ for dep in $("$moddir/check" -d); do
+ check_module_deps "$dep" && continue
+ dwarning "Dependency $mod failed."
+ return 1
+ done
fi
mods_to_load+=" $1 "
}
[[ -x $1/check ]] || return 0
"$1/check" $hostonly || continue
for dep in $("$1/check" -d); do
- check_module_deps "$dep" && continue
- dwarning "Cannot load dracut module \"$mod\", dependencies failed."
- return 1
+ check_module_deps "$dep" && continue
+ dwarning "Cannot load dracut module \"$mod\", dependencies failed."
+ return 1
done
}
local modcheck;
local mod;
for moddir in "$dracutbasedir/modules.d"/[0-9][0-9]*; do
- local mod=${moddir##*/}; mod=${mod#[0-9][0-9]}
- # If we are already scheduled to be loaded, no need to check again.
- strstr " $mods_to_load " " $mod " && continue
- # This should never happen, but...
- [[ -d $moddir ]] || continue
+ local mod=${moddir##*/}; mod=${mod#[0-9][0-9]}
+ # If we are already scheduled to be loaded, no need to check again.
+ strstr " $mods_to_load " " $mod " && continue
+ # This should never happen, but...
+ [[ -d $moddir ]] || continue
strstr " $omit_dracutmodules " " $mod " && continue
if ! strstr " $dracutmodules $add_dracutmodules " " $mod "; then
# module not in our list
- if [[ $dracutmodules = all ]]; then
+ if [[ $dracutmodules = all ]]; then
# check, if we can install this module
- should_source_module "$moddir" || continue
+ should_source_module "$moddir" || continue
else
# skip this module
continue
fi
- else
- if [ -x "$moddir/check" ] \
+ else
+ if [ -x "$moddir/check" ] \
&& "$moddir/check" -d > /dev/null 2>&1; then
- check_module_deps "$mod" || {
- dwarning "Cannot load dracut module \"$mod\", dependencies failed."
+ check_module_deps "$mod" || {
+ dwarning "Cannot load dracut module \"$mod\", dependencies failed."
continue
}
fi
fi
- mods_to_load+=" $mod "
+ mods_to_load+=" $mod "
done
modcheck=$add_dracutmodules
local modname=${1##*/} fwdir found
modname=${modname%.ko*}
inst_simple "$1" "/lib/modules/$kernel/${1##*/lib/modules/$kernel/}" || \
- return 0 # no need to go further if the module is already installed
+ return 0 # no need to go further if the module is already installed
for fw in $(modinfo -k $kernel -F firmware $1 2>/dev/null); do
- found=''
- for fwdir in $fw_dir; do
- if [[ -d $fwdir && -f $fwdir/$fw ]]; then
- inst_simple "$fwdir/$fw" "/lib/firmware/$fw"
- found=yes
- fi
- done
- if [[ $found != yes ]]; then
- dinfo "Possible missing firmware \"${fw}\" for kernel module \"${mod}.ko\""
- fi
+ found=''
+ for fwdir in $fw_dir; do
+ if [[ -d $fwdir && -f $fwdir/$fw ]]; then
+ inst_simple "$fwdir/$fw" "/lib/firmware/$fw"
+ found=yes
+ fi
+ done
+ if [[ $found != yes ]]; then
+ dinfo "Possible missing firmware \"${fw}\" for kernel module \"${mod}.ko\""
+ fi
done
}
local func=$1 kmod=$2 cmd modpapth options
shift 2
modprobe "$@" --ignore-install --show-depends $kmod 2>/dev/null | \
- while read cmd modpath options; do
- [[ $cmd = insmod ]] || continue
- $func $modpath
+ while read cmd modpath options; do
+ [[ $cmd = insmod ]] || continue
+ $func $modpath
done
}
# This function returns the full filenames of modules that match $1
filter_kernel_modules () (
if ! [[ $hostonly ]]; then
- filtercmd='find "$srcmods/kernel/drivers" -name "*.ko" -o -name "*.ko.gz"'
+ filtercmd='find "$srcmods/kernel/drivers" -name "*.ko" -o -name "*.ko.gz"'
else
- filtercmd='cut -d " " -f 1 </proc/modules|xargs modinfo -F filename -k $kernel'
+ filtercmd='cut -d " " -f 1 </proc/modules|xargs modinfo -F filename -k $kernel'
fi
for modname in $(eval $filtercmd); do
case $modname in
*.ko) "$1" "$modname" && echo "$modname";;
*.ko.gz) gzip -dc "$modname" > $initdir/$$.ko
- $1 $initdir/$$.ko && echo "$modname"
- rm -f $initdir/$$.ko;;
+ $1 $initdir/$$.ko && echo "$modname"
+ rm -f $initdir/$$.ko;;
esac
done
)
[[ $no_kernel = yes ]] && return
local mod mpargs modpath modname cmd moddirname
while (($# > 0)); do
- mod=${1%.ko*}
- case $mod in
- =*) # This introduces 2 incompatible meanings for =* arguments
+ mod=${1%.ko*}
+ case $mod in
+ =*)
+ # This introduces 2 incompatible meanings for =* arguments
# to instmods. We need to decide which one to keep.
- if [[ $mod = =ata && -f $srcmods/modules.block ]] ; then
- instmods $mpargs $(egrep 'ata|ahci' "${srcmods}/modules.block")
- elif [ -f $srcmods/modules.${mod#=} ]; then
- instmods $mpargs $(cat ${srcmods}/modules.${mod#=} )
- else
- instmods $mpargs $(find "$srcmods" -path "*/${mod#=}/*")
- fi
- ;;
- --*) mod=${mod##*/}
- mpargs+=" $mod";;
+ if [[ $mod = =ata && -f $srcmods/modules.block ]] ; then
+ instmods $mpargs $(egrep 'ata|ahci' "${srcmods}/modules.block")
+ elif [ -f $srcmods/modules.${mod#=} ]; then
+ instmods $mpargs $(cat ${srcmods}/modules.${mod#=} )
+ else
+ instmods $mpargs $(find "$srcmods" -path "*/${mod#=}/*")
+ fi
+ ;;
+ --*)
+ mod=${mod##*/}
+ mpargs+=" $mod";;
i2o_scsi) shift; continue;; # Do not load this diagnostic-only module
- *) mod=${mod##*/}
+ *) mod=${mod##*/}
# if we are already installed, skip this module and go on
- # to the next one.
- [[ -f $initdir/$1 ]] && { shift; continue; }
- # If we are building a host-specific initramfs and this
- # module is not already loaded, move on to the next one.
- [[ $hostonly ]] && ! grep -qe "\<${mod//-/_}\>" /proc/modules && \
- ! echo $add_drivers | grep -qe "\<${mod}\>" && {
- shift; continue;
- }
-
- # We use '-d' option in modprobe only if modules prefix path
- # differs from default '/'. This allows us to use Dracut with
- # old version of modprobe which doesn't have '-d' option.
- moddirname=${srcmods%%/lib/modules/*}
- [[ -n ${moddirname} ]] && moddirname="-d ${moddirname}/"
-
- # ok, load the module, all its dependencies, and any firmware
- # it may require
- for_each_kmod_dep install_kmod_with_fw $mod \
- --set-version $kernel ${moddirname}
- ;;
- esac
- shift
- done
-}
+ # to the next one.
+ [[ -f $initdir/$1 ]] && { shift; continue; }
+ # If we are building a host-specific initramfs and this
+ # module is not already loaded, move on to the next one.
+ [[ $hostonly ]] && ! grep -qe "\<${mod//-/_}\>" /proc/modules && \
+ ! echo $add_drivers | grep -qe "\<${mod}\>" && {
+ shift; continue;
+ }
-# vim:ts=8:sw=4:sts=4:et
+ # We use '-d' option in modprobe only if modules prefix path
+ # differs from default '/'. This allows us to use Dracut with
+ # old version of modprobe which doesn't have '-d' option.
+ moddirname=${srcmods%%/lib/modules/*}
+ [[ -n ${moddirname} ]] && moddirname="-d ${moddirname}/"
+
+ # ok, load the module, all its dependencies, and any firmware
+ # it may require
+ for_each_kmod_dep install_kmod_with_fw $mod \
+ --set-version $kernel ${moddirname}
+ ;;
+ esac
+ shift
+ done
+}
\ No newline at end of file
#!/bin/bash --norc
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Copyright 2005-2009 Red Hat, Inc. All rights reserved.
#
function get_numeric_dev() {
-(
- fmt="%d:%d"
- if [ "$1" == "hex" ]; then
- fmt="%x:%x"
- fi
- ls -lH "$2" | awk '{ sub(/,/, "", $5); printf("'"$fmt"'", $5, $6); }'
-) 2>/dev/null
+ (
+ fmt="%d:%d"
+ if [ "$1" == "hex" ]; then
+ fmt="%x:%x"
+ fi
+ ls -lH "$2" | awk '{ sub(/,/, "", $5); printf("'"$fmt"'", $5, $6); }'
+ ) 2>/dev/null
}
majmin="$1"
if [ -n "$majmin" ]; then
dev=$(for x in /sys/block/* ; do find $x/ -name dev ; done | while read device ; do \
- echo "$majmin" | cmp -s $device && echo $device ; done)
+ echo "$majmin" | cmp -s $device && echo $device ; done)
if [ -n "$dev" ]; then
dev=${dev%%/dev}
dev=${dev%%/}
iscsi_get_rec_val $tmpfile "node.session.auth.password"
chap_pw="-w ${result}"
else
- chap=""
+ chap=""
fi
iscsi_get_rec_val $tmpfile "node.session.auth.username_in"
iscsi_get_rec_val $tmpfile "node.session.auth.password_in"
chap_in_pw="-W ${result}"
else
- chap_in=""
+ chap_in=""
fi
rm $tmpfile
done << EOF
$(dmsetup table -j $major -m $minor 2>/dev/null)
EOF
- local name=$(dmsetup info --noheadings -c -j $major -m $minor -o name)
- local vg=$(lvshow "/dev/mapper/$name")
- local raids=$(/sbin/dmraid -s -craidname 2>/dev/null | grep -vi "no raid disks")
- if [ -n "$vg" ]; then
- vg=`echo $vg` # strip whitespace
- case " $vg_list " in
- *" $vg "*) ;;
- *) vg_list="$vg_list $vg"
- [ -z "$nolvm" ] && find_base_dm_mods
- ;;
- esac
- fi
- for raid in $raids ; do
- if [ "$raid" == "$name" ]; then
- case " $DMRAIDS " in
- *" $raid "*) ;;
- *) DMRAIDS="$DMRAIDS $raid"
- [ -z "$nodmraid" ] && find_base_dm_mods
+ local name=$(dmsetup info --noheadings -c -j $major -m $minor -o name)
+ local vg=$(lvshow "/dev/mapper/$name")
+ local raids=$(/sbin/dmraid -s -craidname 2>/dev/null | grep -vi "no raid disks")
+ if [ -n "$vg" ]; then
+ vg=`echo $vg` # strip whitespace
+ case " $vg_list " in
+ *" $vg "*) ;;
+ *) vg_list="$vg_list $vg"
+ [ -z "$nolvm" ] && find_base_dm_mods
;;
esac
- break
fi
- done
+ for raid in $raids ; do
+ if [ "$raid" == "$name" ]; then
+ case " $DMRAIDS " in
+ *" $raid "*) ;;
+ *) DMRAIDS="$DMRAIDS $raid"
+ [ -z "$nodmraid" ] && find_base_dm_mods
+ ;;
+ esac
+ break
+ fi
+ done
}
handleiscsi() {
return 0
fi
- levels=$(awk "/^$1[ ]*:/ { print\$4 }" /proc/mdstat)
+ levels=$(awk "/^$1[ ]*:/ { print\$4 }" /proc/mdstat)
for level in $levels ; do
case $level in
- linear)
- start=1
- ;;
- multipath)
- start=1
- ;;
- raid[01] | raid10)
- start=1
- ;;
- raid[456])
- start=1
- ;;
- *)
- error "raid level $level (in /proc/mdstat) not recognized"
- ;;
+ linear)
+ start=1
+ ;;
+ multipath)
+ start=1
+ ;;
+ raid[01] | raid10)
+ start=1
+ ;;
+ raid[456])
+ start=1
+ ;;
+ *)
+ error "raid level $level (in /proc/mdstat) not recognized"
+ ;;
esac
done
if [ "$start" = 1 ]; then
vgdisplay() {
lvm vgdisplay --ignorelockingfailure -v $1 2>/dev/null |
- sed -n 's/PV Name//p'
+ sed -n 's/PV Name//p'
}
dmmods_found="n"
shift
fi
;;
- --rootdev*)
+ --rootdev*)
if [ "$1" != "${1##--rootdev=}" ]; then
rootdev="${1##--rootdev=}"
else
rootdev="$2"
shift
fi
- ;;
- --thawdev*)
+ ;;
+ --thawdev*)
if [ "$1" != "${1##--thawdev=}" ]; then
thawdev="${1##--thawdev=}"
else
thawdev="$2"
shift
fi
- ;;
- --rootfs*)
+ ;;
+ --rootfs*)
if [ "$1" != "${1##--rootfs=}" ]; then
rootfs="${1##--rootfs=}"
else
rootfs="$2"
shift
fi
- ;;
- --rootopts*)
+ ;;
+ --rootopts*)
if [ "$1" != "${1##--rootopts=}" ]; then
rootopts="${1##--rootopts=}"
else
rootopts="$2"
shift
fi
- ;;
- --root*)
+ ;;
+ --root*)
if [ "$1" != "${1##--root=}" ]; then
root="${1##--root=}"
else
root="$2"
shift
fi
- ;;
- --loopdev*)
+ ;;
+ --loopdev*)
if [ "$1" != "${1##--loopdev=}" ]; then
loopdev="${1##--loopdev=}"
else
loopdev="$2"
shift
fi
- ;;
- --loopfs*)
+ ;;
+ --loopfs*)
if [ "$1" != "${1##--loopfs=}" ]; then
loopfs="${1##--loopfs=}"
else
loopfs="$2"
shift
fi
- ;;
- --loopopts*)
+ ;;
+ --loopopts*)
if [ "$1" != "${1##--loopopts=}" ]; then
loopopts="${1##--loopopts=}"
else
loopopts="$2"
shift
fi
- ;;
- --looppath*)
+ ;;
+ --looppath*)
if [ "$1" != "${1##--looppath=}" ]; then
looppath="${1##--looppath=}"
else
looppath="$2"
shift
fi
- ;;
+ ;;
--help)
usage -n
;;
shift
done
- [ -z "$rootfs" ] && rootfs=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $3; }}' $fstab)
- [ -z "$rootopts" ] && rootopts=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $4; }}' $fstab)
- [ -z "$rootopts" ] && rootopts="defaults"
+[ -z "$rootfs" ] && rootfs=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $3; }}' $fstab)
+[ -z "$rootopts" ] && rootopts=$(awk '{ if ($1 !~ /^[ \t]*#/ && $2 == "/") { print $4; }}' $fstab)
+[ -z "$rootopts" ] && rootopts="defaults"
- [ -z "$rootdev" ] && rootdev=$(awk '/^[ \t]*[^#]/ { if ($2 == "/") { print $1; }}' $fstab)
+[ -z "$rootdev" ] && rootdev=$(awk '/^[ \t]*[^#]/ { if ($2 == "/") { print $1; }}' $fstab)
# check if it's nfsroot
- physdev=""
- if [ "$rootfs" == "nfs" ]; then
- if [ "x$net_list" == "x" ]; then
- handlenfs $rootdev
- fi
- else
- # check if it's root by label
- rdev=$rootdev
- rdev=$(resolve_device_name "$rdev")
- rootopts=$(echo $rootopts | sed -e 's/^r[ow],//' -e 's/,_netdev//' -e 's/_netdev//' -e 's/,r[ow],$//' -e 's/,r[ow],/,/' -e 's/^r[ow]$/defaults/' -e 's/$/,ro/')
- findstoragedriver "$rdev"
+physdev=""
+if [ "$rootfs" == "nfs" ]; then
+ if [ "x$net_list" == "x" ]; then
+ handlenfs $rootdev
fi
+else
+ # check if it's root by label
+ rdev=$rootdev
+ rdev=$(resolve_device_name "$rdev")
+ rootopts=$(echo $rootopts | sed -e 's/^r[ow],//' -e 's/,_netdev//' -e 's/_netdev//' -e 's/,r[ow],$//' -e 's/,r[ow],/,/' -e 's/^r[ow]$/defaults/' -e 's/$/,ro/')
+ findstoragedriver "$rdev"
+fi
# find the first swap dev which would get used for swsusp
- [ -z "$thawdev" ] && thawdev=$(awk '/^[ \t]*[^#]/ { if ($3 == "swap") { print $1; exit }}' $fstab)
- swsuspdev="$thawdev"
- if [ -n "$swsuspdev" ]; then
- swsuspdev=$(resolve_device_name "$swsuspdev")
- findstoragedriver "$swsuspdev"
- fi
+[ -z "$thawdev" ] && thawdev=$(awk '/^[ \t]*[^#]/ { if ($3 == "swap") { print $1; exit }}' $fstab)
+swsuspdev="$thawdev"
+if [ -n "$swsuspdev" ]; then
+ swsuspdev=$(resolve_device_name "$swsuspdev")
+ findstoragedriver "$swsuspdev"
+fi
cemit()
if [ -z "$nolvm" -a -n "$vg_list" ]; then
for vg in $vg_list; do
- echo -n "rd_LVM_VG=$vg "
+ echo -n "rd_LVM_VG=$vg "
done
else
echo -n "rd_NO_LVM "
fi
echo
-# vim:ts=8:sw=4:sts=4:et
-#!/bin/sh
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
STATEDIR=/var/lib/dracut
BOOTDIR=/boot
set -e
if $USETRIGGERS \
- && [ x"$DPKG_MAINTSCRIPT_PACKAGE" != x ] \
- && [ $# = 1 ] \
- && [ x"$1" = x-u ] \
- && dpkg-trigger --check-supported 2>/dev/null
+ && [ x"$DPKG_MAINTSCRIPT_PACKAGE" != x ] \
+ && [ $# = 1 ] \
+ && [ x"$1" = x-u ] \
+ && dpkg-trigger --check-supported 2>/dev/null
then
- if dpkg-trigger --no-await update-initramfs; then
- echo "dracut-update-initramfs: deferring update (trigger activated)"
- exit 0
- fi
+ if dpkg-trigger --no-await update-initramfs; then
+ echo "dracut-update-initramfs: deferring update (trigger activated)"
+ exit 0
+ fi
fi
usage()
{
- if [ -n "${1}" ]; then
- printf "${@}\n\n" >&2
- fi
- cat >&2 << EOF
+ if [ -n "${1}" ]; then
+ printf "${@}\n\n" >&2
+ fi
+ cat >&2 << EOF
Usage: ${0} [OPTION]...
Options:
-h This message
EOF
- exit 1
+ exit 1
}
# chroot check
chrooted()
{
# borrowed from udev's postinst
- if [ "$(stat -c %d/%i /)" = "$(stat -Lc %d/%i /proc/1/root 2>/dev/null)" ]; then
+ if [ "$(stat -c %d/%i /)" = "$(stat -Lc %d/%i /proc/1/root 2>/dev/null)" ]; then
# the devicenumber/inode pair of / is the same as that of
# /sbin/init's root, so we're *not* in a chroot and hence
# return false.
- return 1
- fi
- return 0
+ return 1
+ fi
+ return 0
}
mild_panic()
{
- if [ -n "${1}" ]; then
- printf "${@}\n" >&2
- fi
- exit 0
+ if [ -n "${1}" ]; then
+ printf "${@}\n" >&2
+ fi
+ exit 0
}
panic()
{
- if [ -n "${1}" ]; then
- printf "${@}\n" >&2
- fi
- exit 1
+ if [ -n "${1}" ]; then
+ printf "${@}\n" >&2
+ fi
+ exit 1
}
verbose()
{
- if [ "${verbose}" = 1 ]; then
- printf "${@}\n"
- fi
+ if [ "${verbose}" = 1 ]; then
+ printf "${@}\n"
+ fi
}
version_exists()
{
- [ -e "${STATEDIR}/${1}" ] && [ -e "${initramfs}" ]
- return $?
+ [ -e "${STATEDIR}/${1}" ] && [ -e "${initramfs}" ]
+ return $?
}
set_initramfs()
{
- initramfs="${BOOTDIR}/dracut.img-${version}"
+ initramfs="${BOOTDIR}/dracut.img-${version}"
}
# backup initramfs while running
backup_initramfs()
{
- [ ! -r "${initramfs}" ] && return 0
- initramfs_bak="${initramfs}.dpkg-bak"
- [ -r "${initramfs_bak}" ] && rm -f "${initramfs_bak}"
- ln -f "${initramfs}" "${initramfs_bak}" \
- || cp -a "${initramfs}" "${initramfs_bak}"
- verbose "Keeping ${initramfs_bak}"
+ [ ! -r "${initramfs}" ] && return 0
+ initramfs_bak="${initramfs}.dpkg-bak"
+ [ -r "${initramfs_bak}" ] && rm -f "${initramfs_bak}"
+ ln -f "${initramfs}" "${initramfs_bak}" \
+ || cp -a "${initramfs}" "${initramfs_bak}"
+ verbose "Keeping ${initramfs_bak}"
}
# keep booted initramfs
backup_booted_initramfs()
{
- initramfs_bak="${initramfs}.dpkg-bak"
+ initramfs_bak="${initramfs}.dpkg-bak"
# first time run thus no backup
- [ ! -r "${initramfs_bak}" ] && return 0
+ [ ! -r "${initramfs_bak}" ] && return 0
# chroot with no /proc
- [ ! -r /proc/uptime ] && rm -f "${initramfs_bak}" && return 0
+ [ ! -r /proc/uptime ] && rm -f "${initramfs_bak}" && return 0
# no kept backup wanted
- [ "${backup_initramfs}" = "no" ] && rm -f "${initramfs_bak}" && return 0
+ [ "${backup_initramfs}" = "no" ] && rm -f "${initramfs_bak}" && return 0
# no backup yet
- if [ ! -r "${initramfs}.bak" ]; then
- mv -f ${initramfs_bak} "${initramfs}.bak"
- verbose "Backup ${initramfs}.bak"
- return 0
- fi
+ if [ ! -r "${initramfs}.bak" ]; then
+ mv -f ${initramfs_bak} "${initramfs}.bak"
+ verbose "Backup ${initramfs}.bak"
+ return 0
+ fi
# keep booted initramfs
- uptime_days=$(awk '{printf "%d", $1 / 3600 / 24}' /proc/uptime)
- if [ -n "$uptime_days" ]; then
- boot_initramfs=$(find "${initramfs}.bak" -mtime +${uptime_days})
- fi
- if [ -n "${boot_initramfs}" ]; then
- mv -f "${initramfs_bak}" "${initramfs}.bak"
- verbose "Backup ${initramfs}.bak"
- return 0
- fi
- verbose "Removing current backup ${initramfs_bak}"
- rm -f ${initramfs_bak}
+ uptime_days=$(awk '{printf "%d", $1 / 3600 / 24}' /proc/uptime)
+ if [ -n "$uptime_days" ]; then
+ boot_initramfs=$(find "${initramfs}.bak" -mtime +${uptime_days})
+ fi
+ if [ -n "${boot_initramfs}" ]; then
+ mv -f "${initramfs_bak}" "${initramfs}.bak"
+ verbose "Backup ${initramfs}.bak"
+ return 0
+ fi
+ verbose "Removing current backup ${initramfs_bak}"
+ rm -f ${initramfs_bak}
}
# nuke generated copy
remove_initramfs()
{
- [ -z "${initramfs_bak}" ] && return 0
- rm -f "${initramfs_bak}"
- verbose "Removing ${initramfs_bak}"
+ [ -z "${initramfs_bak}" ] && return 0
+ rm -f "${initramfs_bak}"
+ verbose "Removing ${initramfs_bak}"
}
generate_initramfs()
{
- echo "dracut-update-initramfs: Generating ${initramfs}"
- OPTS=""
- if [ "${verbose}" = 1 ]; then
- OPTS="-v ${OPTS}"
- fi
+ echo "dracut-update-initramfs: Generating ${initramfs}"
+ OPTS=""
+ if [ "${verbose}" = 1 ]; then
+ OPTS="-v ${OPTS}"
+ fi
##WORK HERE!
- if dracut ${OPTS} "${initramfs}.new" "${version}"; then
- mv -f "${initramfs}.new" "${initramfs}"
- set_sha1
- else
- mkinitramfs_return="$?"
- remove_initramfs
- rm -f "${initramfs}.new"
- if [ "$mkinitramfs_return" = "2" ]; then
+ if dracut ${OPTS} "${initramfs}.new" "${version}"; then
+ mv -f "${initramfs}.new" "${initramfs}"
+ set_sha1
+ else
+ mkinitramfs_return="$?"
+ remove_initramfs
+ rm -f "${initramfs}.new"
+ if [ "$mkinitramfs_return" = "2" ]; then
# minversion wasn't met, exit 0
- exit 0
- fi
- echo "update-initramfs: failed for ${initramfs}"
- exit $mkinitramfs_return
- fi
+ exit 0
+ fi
+ echo "update-initramfs: failed for ${initramfs}"
+ exit $mkinitramfs_return
+ fi
}
# lilo call
run_lilo()
{
# show lilo errors on failure
- if ! lilo -t > /dev/null 2>&1 ; then
- echo "ERROR lilo fails for new ${initramfs}:"
- echo
- lilo -t
- fi
- lilo
+ if ! lilo -t > /dev/null 2>&1 ; then
+ echo "ERROR lilo fails for new ${initramfs}:"
+ echo
+ lilo -t
+ fi
+ lilo
}
# check if lilo is on mbr
mbr_check()
{
# try to discover grub|grub2 and be happy
- [ -r /boot/grub/grub.cfg ] \
- && groot=$(awk '/^set root=/{print substr($2, 7, 3); exit}' \
- /boot/grub/grub.cfg)
- [ -r /boot/grub/menu.lst ] \
- && groot=$(awk '/^root/{print substr($2, 2, 3); exit}' \
- /boot/grub/menu.lst)
- [ -e /boot/grub/device.map ] && [ -n "${groot}" ] \
- && dev=$(awk "/${groot}/{ print \$NF}" /boot/grub/device.map)
- [ -n "${dev}" ] && [ -r ${dev} ] \
- && dd if="${dev}" bs=512 skip=0 count=1 2> /dev/null \
- | grep -q GRUB && return 0
+ [ -r /boot/grub/grub.cfg ] \
+ && groot=$(awk '/^set root=/{print substr($2, 7, 3); exit}' \
+ /boot/grub/grub.cfg)
+ [ -r /boot/grub/menu.lst ] \
+ && groot=$(awk '/^root/{print substr($2, 2, 3); exit}' \
+ /boot/grub/menu.lst)
+ [ -e /boot/grub/device.map ] && [ -n "${groot}" ] \
+ && dev=$(awk "/${groot}/{ print \$NF}" /boot/grub/device.map)
+ [ -n "${dev}" ] && [ -r ${dev} ] \
+ && dd if="${dev}" bs=512 skip=0 count=1 2> /dev/null \
+ | grep -q GRUB && return 0
# check out lilo.conf for validity
- boot=$(awk -F = '/^boot=/{ print $2}' /etc/lilo.conf)
- [ -z "${boot}" ] && return 0
- case ${boot} in
- /dev/md/*)
- if [ -r /proc/mdstat ]; then
- MD=${boot#/dev/md/}
- boot="/dev/$(awk "/^md${MD}/{print substr(\$5, 1, 3)}" \
- /proc/mdstat)"
- fi
- ;;
- /dev/md*)
- if [ -r /proc/mdstat ]; then
- MD=${boot#/dev/}
- boot="/dev/$(awk "/^${MD}/{print substr(\$5, 1, 3)}" \
- /proc/mdstat)"
- fi
- ;;
- esac
- [ ! -r "${boot}" ] && return 0
- dd if="${boot}" bs=512 skip=0 count=1 2> /dev/null | grep -q LILO \
- && run_lilo && return 0
+ boot=$(awk -F = '/^boot=/{ print $2}' /etc/lilo.conf)
+ [ -z "${boot}" ] && return 0
+ case ${boot} in
+ /dev/md/*)
+ if [ -r /proc/mdstat ]; then
+ MD=${boot#/dev/md/}
+ boot="/dev/$(awk "/^md${MD}/{print substr(\$5, 1, 3)}" \
+ /proc/mdstat)"
+ fi
+ ;;
+ /dev/md*)
+ if [ -r /proc/mdstat ]; then
+ MD=${boot#/dev/}
+ boot="/dev/$(awk "/^${MD}/{print substr(\$5, 1, 3)}" \
+ /proc/mdstat)"
+ fi
+ ;;
+ esac
+ [ ! -r "${boot}" ] && return 0
+ dd if="${boot}" bs=512 skip=0 count=1 2> /dev/null | grep -q LILO \
+ && run_lilo && return 0
# no idea which bootloader is used
- echo
- echo "WARNING: grub and lilo installed."
- echo "If you use grub as bootloader everything is fine."
- echo "If you use lilo as bootloader you must run lilo!"
- echo
+ echo
+ echo "WARNING: grub and lilo installed."
+ echo "If you use grub as bootloader everything is fine."
+ echo "If you use lilo as bootloader you must run lilo!"
+ echo
}
# Invoke bootloader
run_bootloader()
{
# if both lilo and grub around, figure out if lilo needs to be run
- if ( command -v update-grub >/dev/null 2>&1 \
- || [ -e /boot/grub/menu.lst ] || [ -e /boot/grub/grub.cfg ] ) \
- && ( [ -e /etc/lilo.conf ] && command -v lilo >/dev/null 2>&1 ); then
- [ -r "${KPKGCONF}" ] && \
- do_b=$(awk '/^do_bootloader/{print $3}' "${KPKGCONF}")
- if [ "${do_b}" = "yes" ] || [ "${do_b}" = "Yes" ] \
- || [ "${do_b}" = "YES" ]; then
- run_lilo
- return 0
- elif [ "${do_b}" = "no" ] || [ "${do_b}" = "No" ] \
- || [ "${do_b}" = "NO" ]; then
- return 0
- fi
+ if ( command -v update-grub >/dev/null 2>&1 \
+ || [ -e /boot/grub/menu.lst ] || [ -e /boot/grub/grub.cfg ] ) \
+ && ( [ -e /etc/lilo.conf ] && command -v lilo >/dev/null 2>&1 ); then
+ [ -r "${KPKGCONF}" ] && \
+ do_b=$(awk '/^do_bootloader/{print $3}' "${KPKGCONF}")
+ if [ "${do_b}" = "yes" ] || [ "${do_b}" = "Yes" ] \
+ || [ "${do_b}" = "YES" ]; then
+ run_lilo
+ return 0
+ elif [ "${do_b}" = "no" ] || [ "${do_b}" = "No" ] \
+ || [ "${do_b}" = "NO" ]; then
+ return 0
+ fi
# do_bootloader unconfigured
- mbr_check
- return 0
- fi
- if [ -r /etc/lilo.conf ] && command -v lilo >/dev/null 2>&1; then
- run_lilo
- return 0
- fi
- if command -v elilo >/dev/null 2>&1; then
- elilo
- return 0
- fi
- if [ -r /etc/zipl.conf ]; then
- zipl
- fi
- if flash-kernel --supported >/dev/null 2>&1; then
- flash-kernel ${version}
- fi
+ mbr_check
+ return 0
+ fi
+ if [ -r /etc/lilo.conf ] && command -v lilo >/dev/null 2>&1; then
+ run_lilo
+ return 0
+ fi
+ if command -v elilo >/dev/null 2>&1; then
+ elilo
+ return 0
+ fi
+ if [ -r /etc/zipl.conf ]; then
+ zipl
+ fi
+ if flash-kernel --supported >/dev/null 2>&1; then
+ flash-kernel ${version}
+ fi
}
compare_sha1()
{
- sha1sum "${initramfs}" | diff "${STATEDIR}/${version}" - >/dev/null 2>&1
- return $?
+ sha1sum "${initramfs}" | diff "${STATEDIR}/${version}" - >/dev/null 2>&1
+ return $?
}
# Note that this must overwrite so that updates work.
set_sha1()
{
- sha1sum "${initramfs}" > "${STATEDIR}/${version}"
+ sha1sum "${initramfs}" > "${STATEDIR}/${version}"
}
delete_sha1()
{
- rm -f "${STATEDIR}/${version}"
+ rm -f "${STATEDIR}/${version}"
}
# ro /boot is not modified
ro_boot_check()
{
# check irrelevant inside of a chroot
- if [ ! -r /proc/mounts ] || chrooted; then
- return 0
- fi
-
- boot_opts=$(awk '/boot/{if ((match($4, /^ro/) || match($4, /,ro/)) \
- && $2 == "/boot") print "ro"}' /proc/mounts)
- if [ -n "${boot_opts}" ]; then
- echo "WARNING: /boot is ro mounted."
- echo "update-initramfs: Not updating ${initramfs}"
- exit 0
- fi
+ if [ ! -r /proc/mounts ] || chrooted; then
+ return 0
+ fi
+
+ boot_opts=$(awk '/boot/{if ((match($4, /^ro/) || match($4, /,ro/)) \
+ && $2 == "/boot") print "ro"}' /proc/mounts)
+ if [ -n "${boot_opts}" ]; then
+ echo "WARNING: /boot is ro mounted."
+ echo "update-initramfs: Not updating ${initramfs}"
+ exit 0
+ fi
}
get_sorted_versions()
{
- version_list=""
-
- for gsv_x in "${STATEDIR}"/*; do
- gsv_x="$(basename "${gsv_x}")"
- if [ "${gsv_x}" = '*' ]; then
- return 0
- fi
- worklist=""
- for gsv_i in $version_list; do
- if dpkg --compare-versions "${gsv_x}" '>' "${gsv_i}"; then
- worklist="${worklist} ${gsv_x} ${gsv_i}"
- gsv_x=""
- else
- worklist="${worklist} ${gsv_i}"
- fi
- done
- if [ "${gsv_x}" != "" ]; then
- worklist="${worklist} ${gsv_x}"
- fi
- version_list="${worklist}"
- done
-
- verbose "Available versions: ${version_list}"
+ version_list=""
+
+ for gsv_x in "${STATEDIR}"/*; do
+ gsv_x="$(basename "${gsv_x}")"
+ if [ "${gsv_x}" = '*' ]; then
+ return 0
+ fi
+ worklist=""
+ for gsv_i in $version_list; do
+ if dpkg --compare-versions "${gsv_x}" '>' "${gsv_i}"; then
+ worklist="${worklist} ${gsv_x} ${gsv_i}"
+ gsv_x=""
+ else
+ worklist="${worklist} ${gsv_i}"
+ fi
+ done
+ if [ "${gsv_x}" != "" ]; then
+ worklist="${worklist} ${gsv_x}"
+ fi
+ version_list="${worklist}"
+ done
+
+ verbose "Available versions: ${version_list}"
}
set_current_version()
{
- if [ -f /boot/dracut.img-`uname -r` ]; then
- version=`uname -r`
- fi
+ if [ -f /boot/dracut.img-`uname -r` ]; then
+ version=`uname -r`
+ fi
}
set_linked_version()
{
- if [ -e /initrd.img ] && [ -L /initrd.img ]; then
- linktarget="$(basename "$(readlink /initrd.img)")"
- fi
+ if [ -e /initrd.img ] && [ -L /initrd.img ]; then
+ linktarget="$(basename "$(readlink /initrd.img)")"
+ fi
- if [ -e /boot/initrd.img ] && [ -L /boot/initrd.img ]; then
- linktarget="$(basename "$(readlink /boot/initrd.img)")"
- fi
+ if [ -e /boot/initrd.img ] && [ -L /boot/initrd.img ]; then
+ linktarget="$(basename "$(readlink /boot/initrd.img)")"
+ fi
- if [ -z "${linktarget}" ]; then
- return
- fi
+ if [ -z "${linktarget}" ]; then
+ return
+ fi
- version="${linktarget##*img-}"
+ version="${linktarget##*img-}"
}
set_highest_version()
{
- get_sorted_versions
- set -- ${version_list}
- version=${1}
+ get_sorted_versions
+ set -- ${version_list}
+ version=${1}
}
create()
{
- if [ -z "${version}" ]; then
- usage "Create mode requires a version argument"
- fi
+ if [ -z "${version}" ]; then
+ usage "Create mode requires a version argument"
+ fi
- set_initramfs
+ set_initramfs
- if [ "${takeover}" = 0 ]; then
- if version_exists "${version}"; then
- panic "Cannot create version ${version}: already exists"
- fi
+ if [ "${takeover}" = 0 ]; then
+ if version_exists "${version}"; then
+ panic "Cannot create version ${version}: already exists"
+ fi
- if [ -e "${initramfs}" ]; then
- panic "${initramfs} already exists, cannot create."
- fi
- fi
+ if [ -e "${initramfs}" ]; then
+ panic "${initramfs} already exists, cannot create."
+ fi
+ fi
- generate_initramfs
+ generate_initramfs
}
update()
{
- if [ "${update_initramfs}" = "no" ]; then
- echo "update-initramfs: Not updating initramfs."
- exit 0
- fi
+ if [ "${update_initramfs}" = "no" ]; then
+ echo "update-initramfs: Not updating initramfs."
+ exit 0
+ fi
- if [ -z "${version}" ]; then
- set_highest_version
- fi
+ if [ -z "${version}" ]; then
+ set_highest_version
+ fi
- if [ -z "${version}" ]; then
- set_linked_version
- fi
+ if [ -z "${version}" ]; then
+ set_linked_version
+ fi
- if [ -z "${version}" ]; then
- set_current_version
- fi
+ if [ -z "${version}" ]; then
+ set_current_version
+ fi
- if [ -z "${version}" ]; then
- verbose "Nothing to do, exiting."
- exit 0
- fi
+ if [ -z "${version}" ]; then
+ verbose "Nothing to do, exiting."
+ exit 0
+ fi
- set_initramfs
+ set_initramfs
- ro_boot_check
+ ro_boot_check
- altered_check
+ altered_check
- backup_initramfs
+ backup_initramfs
- generate_initramfs
+ generate_initramfs
- run_bootloader
+ run_bootloader
- backup_booted_initramfs
+ backup_booted_initramfs
}
delete()
{
- if [ -z "${version}" ]; then
- usage "Delete mode requires a version argument"
- fi
+ if [ -z "${version}" ]; then
+ usage "Delete mode requires a version argument"
+ fi
- set_initramfs
+ set_initramfs
- if [ ! -e "${initramfs}" ]; then
- panic "Cannot delete ${initramfs}, doesn't exist."
- fi
+ if [ ! -e "${initramfs}" ]; then
+ panic "Cannot delete ${initramfs}, doesn't exist."
+ fi
- if ! version_exists "${version}"; then
- panic "Cannot delete version ${version}: Not created by this utility."
- fi
+ if ! version_exists "${version}"; then
+ panic "Cannot delete version ${version}: Not created by this utility."
+ fi
- altered_check
+ altered_check
- echo "update-initramfs: Deleting ${initramfs}"
+ echo "update-initramfs: Deleting ${initramfs}"
- delete_sha1
+ delete_sha1
- rm -f "${initramfs}"
+ rm -f "${initramfs}"
}
# Check for update mode on existing and modified initramfs
altered_check()
{
# No check on takeover
- [ "${takeover}" = 1 ] && return 0
- if [ ! -e "${initramfs}" ]; then
- mild_panic "${initramfs} does not exist. Cannot update."
- fi
- if ! compare_sha1; then
- echo "update-initramfs: ${initramfs} has been altered." >&2
- mild_panic "update-initramfs: Cannot update. Override with -t option."
- fi
+ [ "${takeover}" = 1 ] && return 0
+ if [ ! -e "${initramfs}" ]; then
+ mild_panic "${initramfs} does not exist. Cannot update."
+ fi
+ if ! compare_sha1; then
+ echo "update-initramfs: ${initramfs} has been altered." >&2
+ mild_panic "update-initramfs: Cannot update. Override with -t option."
+ fi
}
# Defaults
##
while getopts "k:cudyvtb:h?" flag; do
- case "${flag}" in
- k)
- version="${OPTARG}"
- ;;
- c)
- mode="c"
- ;;
- d)
- mode="d"
- ;;
- u)
- mode="u"
- ;;
- v)
- verbose="1"
- ;;
- y)
- yes="1"
- ;;
- t)
- takeover="1"
- ;;
- b)
- BOOTDIR="${OPTARG}"
- if [ ! -d "${BOOTDIR}" ]; then
- echo "Error: ${BOOTDIR} is not a directory."
- exit 1
- fi
- ;;
- h|?)
- usage
- ;;
- esac
+ case "${flag}" in
+ k)
+ version="${OPTARG}"
+ ;;
+ c)
+ mode="c"
+ ;;
+ d)
+ mode="d"
+ ;;
+ u)
+ mode="u"
+ ;;
+ v)
+ verbose="1"
+ ;;
+ y)
+ yes="1"
+ ;;
+ t)
+ takeover="1"
+ ;;
+ b)
+ BOOTDIR="${OPTARG}"
+ if [ ! -d "${BOOTDIR}" ]; then
+ echo "Error: ${BOOTDIR} is not a directory."
+ exit 1
+ fi
+ ;;
+ h|?)
+ usage
+ ;;
+ esac
done
shift $((${OPTIND} - 1))
if [ $# -ne 0 ]; then
- echo "Invalid argument for option -k."
- usage
+ echo "Invalid argument for option -k."
+ usage
fi
# Validate arguments
if [ -z "${mode}" ]; then
- usage "You must specify at least one of -c, -u, or -d."
+ usage "You must specify at least one of -c, -u, or -d."
fi
if [ "${version}" = "all" ] \
- || ( [ "${update_initramfs}" = "all" ] && [ -z "${version}" ] ); then
- : FIXME check for --yes, and if not ask are you sure
- get_sorted_versions
- if [ -z "${version_list}" ]; then
- verbose "Nothing to do, exiting."
- exit 0
- fi
-
- OPTS="-b ${BOOTDIR}"
- if [ "${verbose}" = "1" ]; then
- OPTS="${OPTS} -v"
- fi
- if [ "${takeover}" = "1" ]; then
- OPTS="${OPTS} -t"
- fi
- if [ "${yes}" = "1" ]; then
- OPTS="${OPTS} -y"
- fi
- for u_version in ${version_list}; do
+ || ( [ "${update_initramfs}" = "all" ] && [ -z "${version}" ] ); then
+ : FIXME check for --yes, and if not ask are you sure
+ get_sorted_versions
+ if [ -z "${version_list}" ]; then
+ verbose "Nothing to do, exiting."
+ exit 0
+ fi
+
+ OPTS="-b ${BOOTDIR}"
+ if [ "${verbose}" = "1" ]; then
+ OPTS="${OPTS} -v"
+ fi
+ if [ "${takeover}" = "1" ]; then
+ OPTS="${OPTS} -t"
+ fi
+ if [ "${yes}" = "1" ]; then
+ OPTS="${OPTS} -y"
+ fi
+ for u_version in ${version_list}; do
# Don't stop if one version doesn't work.
- set +e
- verbose "Execute: ${0} -${mode} -k \"${u_version}\" ${OPTS}"
- "${0}" -${mode} -k "${u_version}" ${OPTS}
- set -e
- done
- exit 0
+ set +e
+ verbose "Execute: ${0} -${mode} -k \"${u_version}\" ${OPTS}"
+ "${0}" -${mode} -k "${u_version}" ${OPTS}
+ set -e
+ done
+ exit 0
fi
case "${mode}" in
- c)
- create
- ;;
- d)
- delete
- ;;
- u)
- update
- ;;
+ c)
+ create
+ ;;
+ d)
+ delete
+ ;;
+ u)
+ update
+ ;;
esac
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+#
+# Copyright 2005-2010 Harald Hoyer <harald@redhat.com>
+# Copyright 2005-2010 Red Hat, Inc. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
[[ $# -eq 1 ]] || { echo "Usage: $(basename $0) <initramfs file>" ; exit 1 ; }
[[ -f $1 ]] || { echo "$1 does not exist" ; exit 1 ; }
else
dracut $dracut_args "$target" "$kernel"
fi
-
-# vim:ts=8:sw=4:sts=4:et
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
[ -x /sbin/bootchartd ] || exit 1
# do not enable bootchartd by default
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
inst /sbin/bootchartd
inst /bin/bash
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
[ -x /bin/dash ]
\ No newline at end of file
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
# If another shell is already installed, do not use dash
[[ -x $initdir/bin/sh ]] && return
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
[[ $1 = -d ]] && exit 0
exit 255
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
do_fips()
{
FIPSMODULES=$(cat /etc/fipsmodules)
KERNEL=$(uname -r)
udevadm trigger --action=add >/dev/null 2>&1
case "$boot" in
- block:LABEL=*|LABEL=*)
- boot="${boot#block:}"
- boot="$(echo $boot | sed 's,/,\\x2f,g')"
- boot="/dev/disk/by-label/${boot#LABEL=}"
- bootok=1 ;;
- block:UUID=*|UUID=*)
- boot="${boot#block:}"
- boot="/dev/disk/by-uuid/${root#UUID=}"
- bootok=1 ;;
- /dev/*)
- bootok=1 ;;
+ block:LABEL=*|LABEL=*)
+ boot="${boot#block:}"
+ boot="$(echo $boot | sed 's,/,\\x2f,g')"
+ boot="/dev/disk/by-label/${boot#LABEL=}"
+ bootok=1 ;;
+ block:UUID=*|UUID=*)
+ boot="${boot#block:}"
+ boot="/dev/disk/by-uuid/${root#UUID=}"
+ bootok=1 ;;
+ /dev/*)
+ bootok=1 ;;
esac
[ -z "$UDEVVERSION" ] && UDEVVERSION=$(udevadm --version)
-
+
if [ $UDEVVERSION -ge 143 ]; then
udevadm settle --exit-if-exists=$boot
else
do_fips || die "FIPS integrity test failed"
set +e
fi
-
-# vim:ts=8:sw=4:sts=4:et
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
inst_hook pre-trigger 01 "$moddir/fips.sh"
dracut_install sha512hmac rmmod insmod mount uname umount
for dir in "$usrlibdir" "$libdir"; do
[[ -e $dir/libsoftokn3.so ]] && \
dracut_install $dir/libsoftokn3.so $dir/libsoftokn3.chk \
- $dir/libfreebl3.so $dir/libfreebl3.chk && \
- break
+ $dir/libfreebl3.so $dir/libfreebl3.chk && \
+ break
done
dracut_install $usrlibdir/hmaccalc/sha512hmac.hmac
-
-# vim:ts=8:sw=4:sts=4:et
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
FIPSMODULES="aead aes_generic aes-x86_64 ansi_cprng cbc ccm chainiv ctr"
FIPSMODULES="$FIPSMODULES des deflate ecb eseqiv hmac seqiv sha256 sha512"
echo "blacklist $mod" >> "${initdir}/etc/modprobe.d/fips.conf"
fi
done
-
-# vim:ts=8:sw=4:sts=4:et
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
exit 0
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
[ -e /etc/sysconfig/i18n ] && . /etc/sysconfig/i18n
[ -e /etc/sysconfig/keyboard ] && . /etc/sysconfig/keyboard
local dev=$1
exec 6<${dev} && \
- exec 7>>${dev}
+ exec 7>>${dev}
}
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
KBDSUBDIRS=consolefonts,consoletrans,keymaps,unimaps
DEFAULT_SYSFONT=LatArCyrHeb-16
findkeymap () {
local MAP=$1
[[ ! -f $MAP ]] && \
- MAP=$(find ${kbddir}/keymaps -type f -name $MAP -o -name $MAP.\* | head -n1)
+ MAP=$(find ${kbddir}/keymaps -type f -name $MAP -o -name $MAP.\* | head -n1)
[[ " $KEYMAPS " = *" $MAP "* ]] && return
KEYMAPS="$KEYMAPS $MAP"
case $MAP in
for kbddir in ${kbddir} /usr/lib/kbd /lib/kbd /usr/share
do
[[ -d "${kbddir}" ]] && \
- for dir in ${KBDSUBDIRS//,/ }
- do
- [[ -d "${kbddir}/${dir}" ]] && continue
- false
- done && break
- kbddir=''
+ for dir in ${KBDSUBDIRS//,/ }
+ do
+ [[ -d "${kbddir}/${dir}" ]] && continue
+ false
+ done && break
+ kbddir=''
done
[[ ${kbddir} ]] || {
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
inst_key_val() {
local value
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
[ -f /etc/redhat-release ]
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ -e "$moddir/dracut-version" ]; then
dracut_rpm_version=$(cat "$moddir/dracut-version")
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
for i in dracut-*; do
if [ -f $i ]; then
vinfo < $i
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
if [[ $1 = -d ]]; then
- [ -d /etc/sysconfig/network-scripts/ ] && echo ifcfg
- exit 0
+ [ -d /etc/sysconfig/network-scripts/ ] && echo ifcfg
+ exit 0
fi
. $dracutfunctions
for program in ip arping; do
- if ! type -P $program >/dev/null; then
- dwarning "Could not find program \"$program\" required by network."
- exit 1
- fi
+ if ! type -P $program >/dev/null; then
+ dwarning "Could not find program \"$program\" required by network."
+ exit 1
+ fi
done
for program in dhclient brctl; do
- if ! type -P $program >/dev/null; then
- dwarning "Could not find program \"$program\" it might be required by network."
- fi
+ if ! type -P $program >/dev/null; then
+ dwarning "Could not find program \"$program\" it might be required by network."
+ fi
done
exit 255
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
setup_interface() {
ip=$new_ip_address
# disallow MTUs from 576 and below by default, so that broken
# MTUs are ignored, but higher stuff is allowed (1492, 1500, etc).
if [ -n "$mtu" ] && [ $mtu -gt 576 ] ; then
- echo "if ! ip link set $netif mtu $mtu ; then"
- echo "ip link set $netif down"
- echo "ip link set $netif mtu $mtu"
- echo "ip link set $netif up"
- echo wait_for_if_up $netif
- echo "fi"
+ echo "if ! ip link set $netif mtu $mtu ; then"
+ echo "ip link set $netif down"
+ echo "ip link set $netif mtu $mtu"
+ echo "ip link set $netif up"
+ echo wait_for_if_up $netif
+ echo "fi"
fi > /tmp/net.$netif.up
echo ip addr add $ip${mask:+/$mask} ${bcast:+broadcast $bcast} dev $netif >> /tmp/net.$netif.up
[ -n "${search}${domain}" ] && echo "search $search $domain" > /tmp/net.$netif.resolv.conf
if [ -n "$namesrv" ] ; then
- for s in $namesrv; do
- echo nameserver $s
- done
+ for s in $namesrv; do
+ echo nameserver $s
+ done
fi >> /tmp/net.$netif.resolv.conf
[ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
case $reason in
PREINIT)
- echo "dhcp: PREINIT $netif up"
- ip link set $netif up
- wait_for_if_up $netif
- ;;
+ echo "dhcp: PREINIT $netif up"
+ ip link set $netif up
+ wait_for_if_up $netif
+ ;;
BOUND)
- echo "dhcp: BOND setting $netif"
- if ! arping -q -D -c 2 -I $netif $new_ip_address ; then
- warn "Duplicate address detected for $new_ip_address while doing dhcp. retrying"
- exit 1
- fi
- setup_interface
- set | while read line; do
- [ "${line#new_}" = "$line" ] && continue
- echo "$line"
- done >/tmp/dhclient.$netif.dhcpopts
- echo online > /sys/class/net/$netif/uevent
- /sbin/initqueue --onetime --name netroot-$netif /sbin/netroot $netif
- ;;
+ echo "dhcp: BOND setting $netif"
+ if ! arping -q -D -c 2 -I $netif $new_ip_address ; then
+ warn "Duplicate address detected for $new_ip_address while doing dhcp. retrying"
+ exit 1
+ fi
+ setup_interface
+ set | while read line; do
+ [ "${line#new_}" = "$line" ] && continue
+ echo "$line"
+ done >/tmp/dhclient.$netif.dhcpopts
+ echo online > /sys/class/net/$netif/uevent
+ /sbin/initqueue --onetime --name netroot-$netif /sbin/netroot $netif
+ ;;
*) echo "dhcp: $reason";;
esac
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# Don't continue if root is ok
[ -n "$rootok" ] && return
# Done, all good!
rootok=1
if [ "$netroot" != "dhcp" ] ; then
- netroot=$root
+ netroot=$root
fi
# Shut up init error check
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# if there are no ifname parameters, just use NAME=KERNEL
if ! getarg ifname= >/dev/null ; then
{
for p in $(getargs ifname=); do
parse_ifname_opts $p
- printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="%s", ATTR{type}=="1", NAME="%s"\n' "$ifname_mac" "$ifname_if"
+ printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="%s", ATTR{type}=="1", NAME="%s"\n' "$ifname_mac" "$ifname_if"
done
# Rename non named interfaces out of the way for named ones.
for p in $(getargs ifname=); do
parse_ifname_opts $p
- printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="?*", ATTR{type}=="1", NAME!="?*", KERNEL=="%s", NAME="%%k-renamed"\n' "$ifname_if"
+ printf 'SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="?*", ATTR{type}=="1", NAME!="?*", KERNEL=="%s", NAME="%%k-renamed"\n' "$ifname_if"
done
} > /etc/udev/rules.d/50-ifname.rules
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# We don't need to check for ip= errors here, that is handled by the
# cmdline parser script
# XXX add -V vendor class and option parsing per kernel
echo "Starting dhcp for interface $netif"
dhclient "$@" -1 -q -cf /etc/dhclient.conf -pf /tmp/dhclient.$netif.pid -lf /tmp/dhclient.$netif.lease $netif \
- || echo "dhcp failed"
+ || echo "dhcp failed"
}
load_ipv6() {
modprobe ipv6
i=0
while [ ! -d /proc/sys/net/ipv6 ]; do
- i=$(($i+1))
- [ $i -gt 10 ] && break
- sleep 0.1
+ i=$(($i+1))
+ [ $i -gt 10 ] && break
+ sleep 0.1
done
}
echo 0 > /proc/sys/net/ipv6/conf/$netif/forwarding
echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_ra
echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_redirects
- echo ip link set $netif up
- echo wait_for_if_up $netif
+ echo ip link set $netif up
+ echo wait_for_if_up $netif
} > /tmp/net.$netif.up
[ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname
namesrv=$(getargs nameserver)
if [ -n "$namesrv" ] ; then
- for s in $namesrv; do
- echo nameserver $s
- done
+ for s in $namesrv; do
+ echo nameserver $s
+ done
fi >> /tmp/net.$netif.resolv.conf
strstr $ip '*:*:*' && load_ipv6
{
- echo ip link set $netif up
- echo wait_for_if_up $netif
- # do not flush addr for ipv6
- strstr $ip '*:*:*' || \
- echo ip addr flush dev $netif
- echo ip addr add $ip/$mask dev $netif
+ echo ip link set $netif up
+ echo wait_for_if_up $netif
+ # do not flush addr for ipv6
+ strstr $ip '*:*:*' || \
+ echo ip addr flush dev $netif
+ echo ip addr add $ip/$mask dev $netif
} > /tmp/net.$netif.up
[ -n "$gw" ] && echo ip route add default via $gw dev $netif > /tmp/net.$netif.gw
namesrv=$(getargs nameserver)
if [ -n "$namesrv" ] ; then
- for s in $namesrv; do
- echo nameserver $s
- done
+ for s in $namesrv; do
+ echo nameserver $s
+ done
fi >> /tmp/net.$netif.resolv.conf
echo online > /sys/class/net/$netif/uevent
if [ -z "$ip" ]; then
if [ "$netroot" = "dhcp6" ]; then
- do_dhcp -6
+ do_dhcp -6
else
- do_dhcp -4
+ do_dhcp -4
fi
fi
# looking for ip= lines
for p in $(getargs ip=); do
ip_to_var $p
-
+
# If this option isn't directed at our interface, skip it
[ -n "$dev" ] && [ "$dev" != "$netif" ] && continue
# Store config for later use
for i in ip srv gw mask hostname; do
- eval '[ "$'$i'" ] && echo '$i'="$'$i'"'
+ eval '[ "$'$i'" ] && echo '$i'="$'$i'"'
done > /tmp/net.$netif.override
case $autoconf in
- dhcp|on|any)
- do_dhcp -4 ;;
- dhcp6)
- do_dhcp -6 ;;
- auto6)
- do_ipv6auto ;;
+ dhcp|on|any)
+ do_dhcp -4 ;;
+ dhcp6)
+ do_dhcp -6 ;;
+ auto6)
+ do_ipv6auto ;;
*)
- do_static ;;
+ do_static ;;
esac
break
done
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
dracut_install ip dhclient brctl arping
inst "$moddir/ifup" "/sbin/ifup"
inst "$moddir/netroot" "/sbin/netroot"
arch=$(uname -m)
for dir in "$usrlibdir/tls/$arch" "$usrlibdir/tls" "$usrlibdir/$arch" \
- "$usrlibdir" "$libdir"; do
+ "$usrlibdir" "$libdir"; do
for i in "$dir"/libnss_dns.so.* "$dir"/libnss_mdns4_minimal.so.*; do
[ -e "$i" ] && dracut_install "$i"
done
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
# Include wired net drivers, excluding wireless
net_module_test() {
local net_drivers='eth_type_trans|register_virtio_device'
local unwanted_drivers='/(wireless|isdn|uwb)/'
egrep -q $net_drivers "$1" && \
- egrep -qv 'iw_handler_get_spy' "$1" && \
- [[ ! $1 =~ $unwanted_drivers ]]
+ egrep -qv 'iw_handler_get_spy' "$1" && \
+ [[ ! $1 =~ $unwanted_drivers ]]
}
instmods $(filter_kernel_modules net_module_test)
-
+
instmods ecb arc4
# bridge modules
instmods bridge stp llc
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
for f in /tmp/dhclient.*.pid; do
[ -e $f ] || continue
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# pxelinux provides macaddr '-' separated, but we need ':'
fix_bootif() {
# BOOTIF says everything, use only that one
BOOTIF=$(getarg 'BOOTIF=')
if [ -n "$BOOTIF" ] ; then
- BOOTIF=$(fix_bootif "$BOOTIF")
- printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="/sbin/ifup $env{INTERFACE}"\n' "$BOOTIF"
+ BOOTIF=$(fix_bootif "$BOOTIF")
+ printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="/sbin/ifup $env{INTERFACE}"\n' "$BOOTIF"
# If we have to handle multiple interfaces, handle only them.
elif [ -n "$IFACES" ] ; then
- for iface in $IFACES ; do
- printf 'ACTION=="add", SUBSYSTEM=="net", ENV{INTERFACE}=="%s", RUN+="/sbin/ifup $env{INTERFACE}"\n' "$iface"
- done
+ for iface in $IFACES ; do
+ printf 'ACTION=="add", SUBSYSTEM=="net", ENV{INTERFACE}=="%s", RUN+="/sbin/ifup $env{INTERFACE}"\n' "$iface"
+ done
# Default: We don't know the interface to use, handle all
else
- printf 'ACTION=="add", SUBSYSTEM=="net", RUN+="/sbin/ifup $env{INTERFACE}"\n'
+ printf 'ACTION=="add", SUBSYSTEM=="net", RUN+="/sbin/ifup $env{INTERFACE}"\n'
fi
} > /etc/udev/rules.d/60-net.rules
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
PATH=$PATH:/sbin:/usr/sbin
# If we have a specific bootdev with no dhcpoptions or empty root-path,
# we die. Otherwise we just warn
if [ -z "$new_root_path" ] ; then
- [ -n "$BOOTDEV" ] && die "No dhcp root-path received for '$BOOTDEV'"
- warn "No dhcp root-path received for '$BOOTDEV' trying other interfaces if available"
- exit 1
+ [ -n "$BOOTDEV" ] && die "No dhcp root-path received for '$BOOTDEV'"
+ warn "No dhcp root-path received for '$BOOTDEV' trying other interfaces if available"
+ exit 1
fi
# Set netroot to new_root_path, so cmdline parsers don't call
netroot=$new_root_path
for f in ./cmdline/90*.sh; do
- [ -f "$f" ] && . "$f";
+ [ -f "$f" ] && . "$f";
done
else
rootok="1"
dummy=${netroot#*:}
dummy=${dummy%%:*}
case "$dummy" in
- [0-9]*\.[0-9]*\.[0-9]*\.[0-9]*) dest=$dummy;;
+ [0-9]*\.[0-9]*\.[0-9]*\.[0-9]*) dest=$dummy;;
esac
fi
if [ -n "$dest" ] && ! arping -q -f -w 60 -I $netif $dest ; then
if $handler $netif $netroot $NEWROOT; then
# Network rootfs mount successful
for iface in $IFACES ; do
- [ -f /tmp/dhclient.$iface.lease ] && cp /tmp/dhclient.$iface.lease /tmp/net.$iface.lease
- [ -f /tmp/dhclient.$iface.dhcpopts ] && cp /tmp/dhclient.$iface.dhcpopts /tmp/net.$iface.dhcpopts
+ [ -f /tmp/dhclient.$iface.lease ] && cp /tmp/dhclient.$iface.lease /tmp/net.$iface.lease
+ [ -f /tmp/dhclient.$iface.dhcpopts ] && cp /tmp/dhclient.$iface.dhcpopts /tmp/net.$iface.dhcpopts
done
# Save used netif for later use
# If we're trying with multiple interfaces, put that one down.
# ip down/flush ensures that routeing info goes away as well
if [ -z "$BOOTDEV" ] ; then
- ip link set $netif down
- ip addr flush dev $netif
- echo "#empty" > /etc/resolv.conf
+ ip link set $netif down
+ ip addr flush dev $netif
+ echo "#empty" > /etc/resolv.conf
fi
fi
exit 0
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Format:
-# bridge=<bridgename>:<ethname>
+# bridge=<bridgename>:<ethname>
#
-# bridge without parameters assumes bridge=br0:eth0
+# bridge without parameters assumes bridge=br0:eth0
#
# return if bridge already parsed
# Check if bridge parameter is valid
if getarg bridge= >/dev/null ; then
if [ -z "$netroot" ] ; then
- die "No netboot configured, bridge is invalid"
+ die "No netboot configured, bridge is invalid"
fi
fi
unset bridgename ethname
case $# in
- 0) bridgename=br0; ethname=eth0 ;;
- 1) die "bridge= requires two parameters" ;;
- 2) bridgename=$1; ethname=$2 ;;
- *) die "bridge= requires two parameters" ;;
+ 0) bridgename=br0; ethname=eth0 ;;
+ 1) die "bridge= requires two parameters" ;;
+ 2) bridgename=$1; ethname=$2 ;;
+ *) die "bridge= requires two parameters" ;;
esac
}
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Format:
-# ifname=<interface>:<mac>
+# ifname=<interface>:<mac>
#
# Note letters in the macaddress must be lowercase!
#
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Format:
-# ip=[dhcp|on|any]
+# ip=[dhcp|on|any]
#
-# ip=<interface>:[dhcp|on|any]
+# ip=<interface>:[dhcp|on|any]
#
-# ip=<client-IP-number>:<server-id>:<gateway-IP-number>:<netmask>:<client-hostname>:<interface>:[dhcp|on|any|none|off]
+# ip=<client-IP-number>:<server-id>:<gateway-IP-number>:<netmask>:<client-hostname>:<interface>:[dhcp|on|any|none|off]
#
# When supplying more than only ip= line, <interface> is mandatory and
# bootdev= must contain the name of the primary interface to use for
# Check if ip= lines should be used
if getarg ip= >/dev/null ; then
if [ -z "$netroot" ] ; then
- echo "Warning: No netboot configured, ignoring ip= lines"
- return;
+ echo "Warning: No netboot configured, ignoring ip= lines"
+ return;
fi
fi
if [ -z "$NEEDBOOTDEV" ] ; then
local count=0
for p in $(getargs ip=); do
- count=$(( $count + 1 ))
+ count=$(( $count + 1 ))
done
[ $count -gt 1 ] && NEEDBOOTDEV=1
fi
# Empty autoconf defaults to 'dhcp'
if [ -z "$autoconf" ] ; then
- warn "Empty autoconf values default to dhcp"
- autoconf="dhcp"
+ warn "Empty autoconf values default to dhcp"
+ autoconf="dhcp"
fi
# Error checking for autoconf in combination with other values
case $autoconf in
- error) die "Error parsing option 'ip=$p'";;
- bootp|rarp|both) die "Sorry, ip=$autoconf is currenty unsupported";;
- none|off) \
- [ -z "$ip" ] && \
- die "For argument 'ip=$p'\nValue '$autoconf' without static configuration does not make sense"
- [ -z "$mask" ] && \
- die "Sorry, automatic calculation of netmask is not yet supported"
- ;;
- auto6);;
- dhcp|dhcp6|on|any) \
- [ -n "$NEEDBOOTDEV" ] && [ -z "$dev" ] && \
- die "Sorry, 'ip=$p' does not make sense for multiple interface configurations"
- [ -n "$ip" ] && \
- die "For argument 'ip=$p'\nSorry, setting client-ip does not make sense for '$autoconf'"
- ;;
- *) die "For argument 'ip=$p'\nSorry, unknown value '$autoconf'";;
+ error) die "Error parsing option 'ip=$p'";;
+ bootp|rarp|both) die "Sorry, ip=$autoconf is currenty unsupported";;
+ none|off) \
+ [ -z "$ip" ] && \
+ die "For argument 'ip=$p'\nValue '$autoconf' without static configuration does not make sense"
+ [ -z "$mask" ] && \
+ die "Sorry, automatic calculation of netmask is not yet supported"
+ ;;
+ auto6);;
+ dhcp|dhcp6|on|any) \
+ [ -n "$NEEDBOOTDEV" ] && [ -z "$dev" ] && \
+ die "Sorry, 'ip=$p' does not make sense for multiple interface configurations"
+ [ -n "$ip" ] && \
+ die "For argument 'ip=$p'\nSorry, setting client-ip does not make sense for '$autoconf'"
+ ;;
+ *) die "For argument 'ip=$p'\nSorry, unknown value '$autoconf'";;
esac
if [ -n "$dev" ] ; then
# We don't like duplicate device configs
- if [ -n "$IFACES" ] ; then
- for i in $IFACES ; do
- [ "$dev" = "$i" ] && die "For argument 'ip=$p'\nDuplication configurations for '$dev'"
- done
- fi
- # IFACES list for later use
- IFACES="$IFACES $dev"
+ if [ -n "$IFACES" ] ; then
+ for i in $IFACES ; do
+ [ "$dev" = "$i" ] && die "For argument 'ip=$p'\nDuplication configurations for '$dev'"
+ done
+ fi
+ # IFACES list for later use
+ IFACES="$IFACES $dev"
fi
# Small optimization for udev rules
# Do we need to check for specific options?
if [ -n "$NEEDDHCP" ] || [ -n "$DHCPORSERVER" ] ; then
- # Correct device? (Empty is ok as well)
- [ "$dev" = "$BOOTDEV" ] || continue
- # Server-ip is there?
- [ -n "$DHCPORSERVER" ] && [ -n "$srv" ] && continue
- # dhcp? (It's simpler to check for a set ip. Checks above ensure that if
- # ip is there, we're static
- [ -z "$ip" ] && continue
- # Not good!
- die "Server-ip or dhcp for netboot needed, but current arguments say otherwise"
+ # Correct device? (Empty is ok as well)
+ [ "$dev" = "$BOOTDEV" ] || continue
+ # Server-ip is there?
+ [ -n "$DHCPORSERVER" ] && [ -n "$srv" ] && continue
+ # dhcp? (It's simpler to check for a set ip. Checks above ensure that if
+ # ip is there, we're static
+ [ -z "$ip" ] && continue
+ # Not good!
+ die "Server-ip or dhcp for netboot needed, but current arguments say otherwise"
fi
done
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# ifcfg is required by network
#[[ $1 = -d ]] && echo network
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
inst_hook pre-pivot 85 "$moddir/write-ifcfg.sh"
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# NFS root might have reached here before /tmp/net.ifaces was written
udevadm settle --timeout=30
fi
cat /sys/class/net/$netif/address > /tmp/net.$netif.hwaddr
{
- echo "# Generated by dracut initrd"
- echo "DEVICE=$netif"
- echo "ONBOOT=yes"
- echo "NETBOOT=yes"
- if [ -f /tmp/net.$netif.lease ]; then
- strstr "$ip" '*:*:*' &&
- echo "DHCPV6C=yes"
- echo "BOOTPROTO=dhcp"
- else
- echo "BOOTPROTO=none"
+ echo "# Generated by dracut initrd"
+ echo "DEVICE=$netif"
+ echo "ONBOOT=yes"
+ echo "NETBOOT=yes"
+ if [ -f /tmp/net.$netif.lease ]; then
+ strstr "$ip" '*:*:*' &&
+ echo "DHCPV6C=yes"
+ echo "BOOTPROTO=dhcp"
+ else
+ echo "BOOTPROTO=none"
# If we've booted with static ip= lines, the override file is there
- . /tmp/net.$netif.override
- echo "IPADDR=$ip"
- echo "NETMASK=$mask"
- [ -n "$gw" ] && echo "GATEWAY=$gw"
- fi
+ . /tmp/net.$netif.override
+ echo "IPADDR=$ip"
+ echo "NETMASK=$mask"
+ [ -n "$gw" ] && echo "GATEWAY=$gw"
+ fi
} > /tmp/ifcfg/ifcfg-$netif
# bridge needs different things written to ifcfg
if [ -z "$bridge" ]; then
# standard interface
- {
+ {
echo "HWADDR=$(cat /sys/class/net/$netif/address)"
echo "TYPE=Ethernet"
echo "NAME=\"Boot Disk\""
- } >> /tmp/ifcfg/ifcfg-$netif
+ } >> /tmp/ifcfg/ifcfg-$netif
else
# bridge
- {
- echo "TYPE=Bridge"
+ {
+ echo "TYPE=Bridge"
echo "NAME=\"Boot Disk\""
- } >> /tmp/ifcfg/ifcfg-$netif
+ } >> /tmp/ifcfg/ifcfg-$netif
# write separate ifcfg file for the raw eth interface
- {
+ {
echo "DEVICE=$ethname"
echo "TYPE=Ethernet"
echo "ONBOOT=yes"
echo "HWADDR=$(cat /sys/class/net/$ethname/address)"
echo "BRIDGE=$netif"
echo "NAME=$ethname"
- } >> /tmp/ifcfg/ifcfg-$ethname
+ } >> /tmp/ifcfg/ifcfg-$ethname
fi
done
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# TODO: splash_geninitramfs
# TODO: /usr/share/splashutils/initrd.splash
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
CDROOT=0
. /lib/gensplash-lib.sh
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
CDROOT=0
. /lib/gensplash-lib.sh
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
if ! getarg rd_NO_SPLASH; then
[ -c /dev/null ] || mknod /dev/null c 1 3
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
call_splash_geninitramfs() {
local out ret
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
[[ $1 = -d ]] && type -P cryptsetup >/dev/null && echo crypt
[[ -x /sbin/plymouthd && -x /bin/plymouth && -x /usr/sbin/plymouth-set-default-theme ]]
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
if grep -q nash /usr/libexec/plymouth/plymouth-populate-initrd \
- || ! grep -q PLYMOUTH_POPULATE_SOURCE_FUNCTIONS /usr/libexec/plymouth/plymouth-populate-initrd \
- || [ ! -x /usr/libexec/plymouth/plymouth-populate-initrd ]; then
+ || ! grep -q PLYMOUTH_POPULATE_SOURCE_FUNCTIONS /usr/libexec/plymouth/plymouth-populate-initrd \
+ || [ ! -x /usr/libexec/plymouth/plymouth-populate-initrd ]; then
. "$moddir"/plymouth-populate-initrd
else
PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$dracutfunctions" \
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# Include KMS capable drm drivers
for modname in $(find "$srcmods/kernel/drivers/gpu/drm" -name '*.ko' 2>/dev/null); do
grep -q drm_crtc_init $modname && instmods $modname
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
[ -x /bin/plymouth ] && /bin/plymouth --hide-splash
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ -x /bin/plymouth ]; then
- /bin/plymouth --newroot=$NEWROOT
+ /bin/plymouth --newroot=$NEWROOT
fi
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
PLYMOUTH_LOGO_FILE="/usr/share/pixmaps/system-logo-white.png"
PLYMOUTH_THEME=$(plymouth-set-default-theme)
if [[ $hostonly ]]; then
dracut_install "${usrlibdir}/plymouth/text.so" \
- "${usrlibdir}/plymouth/details.so" \
- "/usr/share/plymouth/themes/details/details.plymouth" \
- "/usr/share/plymouth/themes/text/text.plymouth" \
+ "${usrlibdir}/plymouth/details.so" \
+ "/usr/share/plymouth/themes/details/details.plymouth" \
+ "/usr/share/plymouth/themes/text/text.plymouth" \
if [[ -d /usr/share/plymouth/themes/${PLYMOUTH_THEME} ]]; then
- for x in "/usr/share/plymouth/themes/${PLYMOUTH_THEME}"/* ; do
+ for x in "/usr/share/plymouth/themes/${PLYMOUTH_THEME}"/* ; do
[[ -f "$x" ]] || break
inst $x
- done
+ done
fi
if [ -L /usr/share/plymouth/themes/default.plymouth ]; then
- inst /usr/share/plymouth/themes/default.plymouth
+ inst /usr/share/plymouth/themes/default.plymouth
# Install plugin for this theme
- PLYMOUTH_PLUGIN=$(grep "^ModuleName=" /usr/share/plymouth/themes/default.plymouth | while read a b c; do echo $b; done;)
- inst "${usrlibdir}/plymouth/${PLYMOUTH_PLUGIN}.so"
+ PLYMOUTH_PLUGIN=$(grep "^ModuleName=" /usr/share/plymouth/themes/default.plymouth | while read a b c; do echo $b; done;)
+ inst "${usrlibdir}/plymouth/${PLYMOUTH_PLUGIN}.so"
fi
else
for x in /usr/share/plymouth/themes/{text,details}/* ; do
[[ -f "$x" ]] || continue
- THEME_DIR=$(dirname "$x")
- mkdir -p "${initdir}/$THEME_DIR"
+ THEME_DIR=$(dirname "$x")
+ mkdir -p "${initdir}/$THEME_DIR"
dracut_install "$x"
done
for x in "${usrlibdir}"/plymouth/{text,details}.so ; do
dracut_install "$x"
done
(
- cd ${initdir}/usr/share/plymouth/themes;
- ln -s text/text.plymouth default.plymouth 2>&1;
+ cd ${initdir}/usr/share/plymouth/themes;
+ ln -s text/text.plymouth default.plymouth 2>&1;
)
fi
-
-# vim:ts=8:sw=4:sts=4:et
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
if ! getarg rd_NO_PLYMOUTH; then
[ -c /dev/null ] || mknod -m 0666 /dev/null c 1 3
/lib/udev/console_init tty0
/bin/plymouth --show-splash 2>&1 | vinfo
fi
-
-
-# vim:ts=8:sw=4:sts=4:et
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# No Xen-detect? Boo!!
if ! hash xen-detect 2>/dev/null; then
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
hash xen-detect 2>/dev/null || \
hash -p /usr/lib/xen-default/bin/xen-detect xen-detect
inst "$(hash -t xen-detect)" /sbin/xen-detect
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
for i in \
xenbus_probe_frontend xen-pcifront \
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
xen-detect
RC=$?
if [ "$RC" = "1" ] ; then
- modprobe xenbus_probe_frontend
- modprobe xen-kbdfront
- modprobe xen-fbfront
- modprobe xen-blkfront
- modprobe xen-netfront
- modprobe xen-pcifront
+ modprobe xenbus_probe_frontend
+ modprobe xen-kbdfront
+ modprobe xen-fbfront
+ modprobe xen-blkfront
+ modprobe xen-netfront
+ modprobe xen-pcifront
fi
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# We depend on udev-rules being loaded
[[ "$1" = "-d" ]] && exit 0
if [[ "$1" = "-h" ]]; then
rootdev=$(find_root_block_device)
if [[ $rootdev ]]; then
- is_btrfs "$rootdev" || exit 1
+ is_btrfs "$rootdev" || exit 1
fi
fi
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
inst_rules "$moddir/40-btrfs.rules"
dracut_install btrfsctl
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# if cryptsetup is not installed, then we cannot support encrypted devices.
type -P cryptsetup >/dev/null || exit 1
[[ $1 = '-h' ]] && {
rootdev=$(find_root_block_device)
if [[ $rootdev ]]; then
- # root lives on a block device, so we can be more precise about
- # hostonly checking
- check_block_and_slaves is_crypt "$rootdev" || exit 1
+ # root lives on a block device, so we can be more precise about
+ # hostonly checking
+ check_block_and_slaves is_crypt "$rootdev" || exit 1
else
- # root is not on a block device, use the shotgun approach
- blkid | grep -q crypto\?_LUKS || exit 1
+ # root is not on a block device, use the shotgun approach
+ blkid | grep -q crypto\?_LUKS || exit 1
fi
}
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# close everything which is not busy
rm -f /etc/udev/rules.d/70-luks.rules >/dev/null 2>&1
while true; do
- local do_break="y"
- for i in /dev/mapper/luks-*; do
- cryptsetup luksClose $i >/dev/null 2>&1 && do_break=n
- done
- [ "$do_break" = "y" ] && break
+ local do_break="y"
+ for i in /dev/mapper/luks-*; do
+ cryptsetup luksClose $i >/dev/null 2>&1 && do_break=n
+ done
+ [ "$do_break" = "y" ] && break
done
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# do not ask, if we already have root
[ -f /sysroot/proc ] && exit 0
luksname="$name"
break
fi
-
+
# path used in crypttab
else
cdev=$(readlink -f $dev)
if [ -n "$keypaths" ]; then
keydev_uuids="$(getargs rd_LUKS_KEYDEV_UUID)"
[ -n "$keydev_uuids" ] || {
- warn 'No UUID of device storing LUKS key specified.'
- warn 'It is recommended to set rd_LUKS_KEYDEV_UUID.'
- warn 'Performing scan of *all* devices accessible by UUID...'
+ warn 'No UUID of device storing LUKS key specified.'
+ warn 'It is recommended to set rd_LUKS_KEYDEV_UUID.'
+ warn 'Performing scan of *all* devices accessible by UUID...'
}
tmp=$(foreach_uuid_until "probe_keydev \$full_uuid $keypaths" \
- $keydev_uuids) && {
+ $keydev_uuids) && {
keydev_uuid="${tmp%% *}"
keypath="${tmp#* }"
} || {
prompt="Password for $device ($sluksname...)"
fi
- # flock against other interactive activities
+ # flock against other interactive activities
{ flock -s 9;
/bin/plymouth ask-for-password \
- --prompt "$prompt" \
- --command="/sbin/cryptsetup luksOpen -T1 $device $luksname"
+ --prompt "$prompt" \
+ --command="/sbin/cryptsetup luksOpen -T1 $device $luksname"
} 9>/.console.lock
-
- unset sluksname prompt
-
+
+ unset sluksname prompt
+
else
# flock against other interactive activities
{ flock -s 9;
- echo "$device ($luksname) is password protected"
- cryptsetup luksOpen -T5 $device $luksname
+ echo "$device ($luksname) is password protected"
+ cryptsetup luksOpen -T5 $device $luksname
} 9>/.console.lock
fi
fi
udevsettle
exit 0
-# vim:ts=8:sw=4:sts=4:et
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
inst cryptsetup
inst "$moddir"/cryptroot-ask.sh /sbin/cryptroot-ask
inst_hook cmdline 30 "$moddir/parse-crypt.sh"
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
instmods dm_crypt cbc sha256 xts aes aes_generic aesni-intel aes-x86_64 fpu
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
if getarg rd_NO_LUKS; then
info "rd_NO_LUKS: removing cryptoluks activation"
rm -f /etc/udev/rules.d/70-luks.rules
LUKS=$(getargs rd_LUKS_UUID)
unset settled
[ -n "$(getargs rd_LUKS_KEYPATH)" ] && \
- [ -z "$(getargs rd_LUKS_KEYDEV_UUID)" ] && \
- settled='--settled'
+ [ -z "$(getargs rd_LUKS_KEYDEV_UUID)" ] && \
+ settled='--settled'
if [ -n "$LUKS" ]; then
for luksid in $LUKS; do
} >> /etc/udev/rules.d/70-luks.rules
printf '[ -e /dev/disk/by-uuid/*%s* ] || exit 1\n' $luksid \
- >> /initqueue-finished/crypt.sh
+ >> /initqueue-finished/crypt.sh
{
printf '[ -e /dev/disk/by-uuid/*%s* ] || ' $luksid
printf 'warn "crypto LUKS UUID "%s" not found"\n' $luksid
done
else
echo 'ENV{ID_FS_TYPE}=="crypto_LUKS", RUN+="/sbin/initqueue' $settled \
- '--unique --onetime --name cryptroot-ask-%k' \
- '/sbin/cryptroot-ask $env{DEVNAME} luks-$env{ID_FS_UUID}"' \
- >> /etc/udev/rules.d/70-luks.rules
+ '--unique --onetime --name cryptroot-ask-%k' \
+ '/sbin/cryptroot-ask $env{DEVNAME} luks-$env{ID_FS_UUID}"' \
+ >> /etc/udev/rules.d/70-luks.rules
fi
echo 'LABEL="luks_end"' >> /etc/udev/rules.d/70-luks.rules
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
exit 255
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
strstr "$(cat /proc/misc)" device-mapper || modprobe dm_mod
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
modinfo -k $kernel dm_mod >/dev/null 2>&1 && \
inst_hook pre-udev 30 "$moddir/dm-pre-udev.sh"
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
instmods =drivers/md
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# We depend on dm_mod being loaded
[ "$1" = "-d" ] && echo dm
[[ $1 = '-h' ]] && {
rootdev=$(find_root_block_device)
if [[ $rootdev ]]; then
- # root lives on a block device, so we can be more precise about
- # hostonly checking
- check_block_and_slaves is_dmraid "$rootdev" || exit 1
+ # root lives on a block device, so we can be more precise about
+ # hostonly checking
+ check_block_and_slaves is_dmraid "$rootdev" || exit 1
else
- # root is not on a block device, use the shotgun approach
- dmraid -r | grep -q ok || exit 1
+ # root is not on a block device, use the shotgun approach
+ dmraid -r | grep -q ok || exit 1
fi
}
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
. /lib/dracut-lib.sh
if [ -n "$DM_RAIDS" ]; then
# only activate specified DM RAIDS
for r in $DM_RAIDS; do
- for s in $SETS; do
- if [ "${s##$r}" != "$s" ]; then
- info "Activating $s"
+ for s in $SETS; do
+ if [ "${s##$r}" != "$s" ]; then
+ info "Activating $s"
dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo
[ -e "/dev/mapper/$s" ] && kpartx -a -p p "/dev/mapper/$s" 2>&1 | vinfo
udevsettle
- fi
- done
+ fi
+ done
done
else
# scan and activate all DM RAIDS
for s in $SETS; do
- info "Activating $s"
+ info "Activating $s"
dmraid -ay -i -p --rm_partitions "$s" 2>&1 | vinfo
[ -e "/dev/mapper/$s" ] && kpartx -a -p p "/dev/mapper/$s" 2>&1 | vinfo
done
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
dracut_install dmraid partx kpartx
inst dmeventd
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# nodmraid for anaconda / rc.sysinit compatibility
if getarg rd_NO_DM || getarg nodmraid; then
info "rd_NO_DM: removing DM RAID activation"
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# if dmsetup is not installed, then we cannot support fedora/red hat
# style live images
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ "${root%%:*}" = "live" ]; then
{
- printf 'KERNEL=="%s", SYMLINK+="live"\n' \
- ${root#live:/dev/}
- printf 'SYMLINK=="%s", SYMLINK+="live"\n' \
- ${root#live:/dev/}
+ printf 'KERNEL=="%s", SYMLINK+="live"\n' \
+ ${root#live:/dev/}
+ printf 'SYMLINK=="%s", SYMLINK+="live"\n' \
+ ${root#live:/dev/}
} >> /dev/.udev/rules.d/99-live-mount.rules
{
- printf 'KERNEL=="%s", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root $env{DEVNAME}"\n' \
- ${root#live:/dev/}
- printf 'SYMLINK=="%s", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root $env{DEVNAME}"\n' \
- ${root#live:/dev/}
+ printf 'KERNEL=="%s", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root $env{DEVNAME}"\n' \
+ ${root#live:/dev/}
+ printf 'SYMLINK=="%s", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root $env{DEVNAME}"\n' \
+ ${root#live:/dev/}
} >> /etc/udev/rules.d/99-live-squash.rules
echo '[ -e /dev/root ]' > /initqueue-finished/dmsquash.sh
fi
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
. /lib/dracut-lib.sh
[ -f /tmp/root.info ] && . /tmp/root.info
if [ -n "$check" ]; then
checkisomd5 --verbose $livedev || :
if [ $? -ne 0 ]; then
- die "CD check failed!"
- exit 1
+ die "CD check failed!"
+ exit 1
fi
fi
if [ -f /overlayfs$pathspec -a -w /overlayfs$pathspec ]; then
losetup $OVERLAY_LOOPDEV /overlayfs$pathspec
if [ -n "$reset_overlay" ]; then
- dd if=/dev/zero of=$OVERLAY_LOOPDEV bs=64k count=1 2>/dev/null
+ dd if=/dev/zero of=$OVERLAY_LOOPDEV bs=64k count=1 2>/dev/null
fi
setup="yes"
fi
if [ -z "$setup" ]; then
if [ -n "$devspec" -a -n "$pathspec" ]; then
- warn "Unable to find persistent overlay; using temporary"
- sleep 5
+ warn "Unable to find persistent overlay; using temporary"
+ sleep 5
fi
dd if=/dev/null of=/overlay bs=1024 count=1 seek=$((512*1024)) 2> /dev/null
# we might have just an embedded ext3 to use as rootfs (uncompressed live)
if [ -e /dev/.initramfs/live/${live_dir}/ext3fs.img ]; then
- EXT3FS="/dev/.initramfs/live/${live_dir}/ext3fs.img"
+ EXT3FS="/dev/.initramfs/live/${live_dir}/ext3fs.img"
fi
if [ -n "$EXT3FS" ] ; then
# we might have an embedded ext3 on squashfs to use as rootfs (compressed live)
if [ -e /dev/.initramfs/live/${live_dir}/squashfs.img ]; then
- SQUASHED="/dev/.initramfs/live/${live_dir}/squashfs.img"
+ SQUASHED="/dev/.initramfs/live/${live_dir}/squashfs.img"
fi
if [ -e "$SQUASHED" ] ; then
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ "${root%%:*}" = "liveiso" ]; then
{
- printf 'KERNEL=="loop0", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root `/sbin/losetup -f --show %s`"\n' \
- ${root#liveiso:}
+ printf 'KERNEL=="loop0", RUN+="/sbin/initqueue --settled --onetime --unique /sbin/dmsquash-live-root `/sbin/losetup -f --show %s`"\n' \
+ ${root#liveiso:}
} >> /etc/udev/rules.d/99-liveiso-mount.rules
echo '[ -e /dev/root ]' > /initqueue-finished/dmsquash.sh
fi
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
dracut_install umount
inst dmsetup
inst blkid
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# live images are specified with
# root=live:backingdev
[ "${liveroot%%:*}" = "live" ] || return
case "$liveroot" in
- live:LABEL=*|LABEL=*)
- root="${root#live:}"
- root="$(echo $root | sed 's,/,\\x2f,g')"
- root="live:/dev/disk/by-label/${root#LABEL=}"
+ live:LABEL=*|LABEL=*) \
+ root="${root#live:}"
+ root="$(echo $root | sed 's,/,\\x2f,g')"
+ root="live:/dev/disk/by-label/${root#LABEL=}"
rootok=1 ;;
- live:CDLABEL=*|CDLABEL=*)
- root="${root#live:}"
- root="$(echo $root | sed 's,/,\\x2f,g')"
- root="live:/dev/disk/by-label/${root#CDLABEL=}"
+ live:CDLABEL=*|CDLABEL=*) \
+ root="${root#live:}"
+ root="$(echo $root | sed 's,/,\\x2f,g')"
+ root="live:/dev/disk/by-label/${root#CDLABEL=}"
rootok=1 ;;
- live:UUID=*|UUID=*)
- root="${root#live:}"
- root="live:/dev/disk/by-uuid/${root#UUID=}"
+ live:UUID=*|UUID=*) \
+ root="${root#live:}"
+ root="live:/dev/disk/by-uuid/${root#UUID=}"
rootok=1 ;;
live:/*.[Ii][Ss][Oo]|/*.[Ii][Ss][Oo])
- root="${root#live:}"
- root="liveiso:${root}"
- rootok=1 ;;
+ root="${root#live:}"
+ root="liveiso:${root}"
+ rootok=1 ;;
live:/dev/*)
rootok=1 ;;
esac
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
[ -f /etc/modprobe.conf ] && dracut_install /etc/modprobe.conf
dracut_install $(find /etc/modprobe.d/ -type f -name '*.conf')
inst_hook cmdline 01 "$moddir/parse-kernel.sh"
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
if [[ -z $drivers ]]; then
block_module_test() {
- local blockfuncs='ahci_init_controller|ata_scsi_ioctl|scsi_add_host|blk_init_queue|register_mtd_blktrans|scsi_esp_register|register_virtio_device'
+ local blockfuncs='ahci_init_controller|ata_scsi_ioctl|scsi_add_host|blk_init_queue|register_mtd_blktrans|scsi_esp_register|register_virtio_device'
- egrep -q "$blockfuncs" "$1"
+ egrep -q "$blockfuncs" "$1"
}
hostonly='' instmods sr_mod sd_mod scsi_dh scsi_dh_rdac scsi_dh_emc
hostonly='' instmods pcmcia firewire-ohci
instmods $(filter_kernel_modules block_module_test)
# if not on hostonly mode, install all known filesystems if the required list is not set via the filesystems variable
if ! [[ $hostonly ]]; then
- if [[ -z $filesystems ]]; then
- instmods '=fs'
- # hardcoded list of exceptions
- # to save a lot of space
- rm -fr ${initdir}/lib/modules/*/kernel/fs/ocfs2
- else
- instmods $filesystems
- fi
+ if [[ -z $filesystems ]]; then
+ instmods '=fs'
+ # hardcoded list of exceptions
+ # to save a lot of space
+ rm -fr ${initdir}/lib/modules/*/kernel/fs/ocfs2
+ else
+ instmods $filesystems
+ fi
else
- hostonly='' instmods $(get_fs_type "/dev/block/$(find_root_block_device)")
+ hostonly='' instmods $(get_fs_type "/dev/block/$(find_root_block_device)")
fi
else
- hostonly='' instmods $drivers $filesystems
+ hostonly='' instmods $drivers $filesystems
fi
[[ $add_drivers ]] && hostonly='' instmods $add_drivers
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
for p in $(getargs rdloaddriver=); do
- modprobe $p
+ modprobe $p
done
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# We depend on dm_mod being loaded
[ "$1" = "-d" ] && echo dm
[[ $1 = '-h' ]] && {
rootdev=$(find_root_block_device)
if [[ $rootdev ]]; then
- # root lives on a block device, so we can be more precise about
- # hostonly checking
- check_block_and_slaves is_lvm "$rootdev" || exit 1
+ # root lives on a block device, so we can be more precise about
+ # hostonly checking
+ check_block_and_slaves is_lvm "$rootdev" || exit 1
else
- # root is not on a block device, use the shotgun approach
- blkid | grep -q LVM2_member || exit 1
+ # root is not on a block device, use the shotgun approach
+ blkid | grep -q LVM2_member || exit 1
fi
}
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
inst lvm
inst_rules "$moddir/64-lvm.rules"
if [[ $hostonly ]] || [[ $lvmconf = "yes" ]]; then
if [ -f /etc/lvm/lvm.conf ]; then
- inst /etc/lvm/lvm.conf
- # FIXME: near-term hack to establish read-only locking;
- # use command-line lvm.conf editor once it is available
- sed -i -e 's/\(^[[:space:]]*\)locking_type[[:space:]]*=[[:space:]]*[[:digit:]]/\1locking_type = 4/' ${initdir}/etc/lvm/lvm.conf
+ inst /etc/lvm/lvm.conf
+ # FIXME: near-term hack to establish read-only locking;
+ # use command-line lvm.conf editor once it is available
+ sed -i -e 's/\(^[[:space:]]*\)locking_type[[:space:]]*=[[:space:]]*[[:digit:]]/\1locking_type = 4/' ${initdir}/etc/lvm/lvm.conf
fi
fi
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# run lvm scan if udev has settled
# build a list of devices to scan
lvmdevs=$(
for f in /tmp/.lvm_scan-*; do
- [ -e "$f" ] || continue
- echo -n "${f##/tmp/.lvm_scan-} "
+ [ -e "$f" ] || continue
+ echo -n "${f##/tmp/.lvm_scan-} "
done
)
if [ ! -e /etc/lvm/lvm.conf ]; then
{
- echo 'devices {';
- echo -n ' filter = [ '
- for dev in $lvmdevs; do
- printf '"a|^/dev/%s$|", ' $dev;
- done;
- echo '"r/.*/" ]';
- echo '}';
- # establish read-only locking
- echo 'global {';
- echo ' locking_type = 4';
- echo '}';
+ echo 'devices {';
+ echo -n ' filter = [ '
+ for dev in $lvmdevs; do
+ printf '"a|^/dev/%s$|", ' $dev;
+ done;
+ echo '"r/.*/" ]';
+ echo '}';
+ # establish read-only locking
+ echo 'global {';
+ echo ' locking_type = 4';
+ echo '}';
} > /etc/lvm/lvm.conf
lvmwritten=1
fi
# hopefully this output format will never change, e.g.:
# LVM version: 2.02.53(1) (2009-09-25)
lvm version 2>/dev/null | \
- (
- IFS=. read maj min sub;
- maj=${maj##*:};
- sub=${sub%% *}; sub=${sub%%\(*};
- check_lvm_ver $maj $min $sub && \
- echo " --poll n ") 2>/dev/null )
+ (
+ IFS=. read maj min sub;
+ maj=${maj##*:};
+ sub=${sub%% *}; sub=${sub%%\(*};
+ check_lvm_ver $maj $min $sub && \
+ echo " --poll n ") 2>/dev/null )
-if [ -n "$LVS" ] ; then
- info "Scanning devices $lvmdevs for LVM logical volumes $LVS"
- lvm lvscan --ignorelockingfailure 2>&1 | vinfo
- lvm lvchange -ay --ignorelockingfailure $nopoll --ignoremonitoring $LVS 2>&1 | vinfo
-fi
+ if [ -n "$LVS" ] ; then
+ info "Scanning devices $lvmdevs for LVM logical volumes $LVS"
+ lvm lvscan --ignorelockingfailure 2>&1 | vinfo
+ lvm lvchange -ay --ignorelockingfailure $nopoll --ignoremonitoring $LVS 2>&1 | vinfo
+ fi
-if [ -z "$LVS" -o -n "$VGS" ]; then
- info "Scanning devices $lvmdevs for LVM volume groups $VGS"
- lvm vgscan --ignorelockingfailure 2>&1 | vinfo
- lvm vgchange -ay --ignorelockingfailure $nopoll --ignoremonitoring $VGS 2>&1 | vinfo
-fi
+ if [ -z "$LVS" -o -n "$VGS" ]; then
+ info "Scanning devices $lvmdevs for LVM volume groups $VGS"
+ lvm vgscan --ignorelockingfailure 2>&1 | vinfo
+ lvm vgchange -ay --ignorelockingfailure $nopoll --ignoremonitoring $VGS 2>&1 | vinfo
+ fi
-if [ "$lvmwritten" ]; then
- rm -f /etc/lvm/lvm.conf
- ln -s /sbin/lvm-cleanup /pre-pivot/30-lvm-cleanup.sh 2>/dev/null
- ln -s /sbin/lvm-cleanup /pre-pivot/31-lvm-cleanup.sh 2>/dev/null
-fi
-unset lvmwritten
+ if [ "$lvmwritten" ]; then
+ rm -f /etc/lvm/lvm.conf
+ ln -s /sbin/lvm-cleanup /pre-pivot/30-lvm-cleanup.sh 2>/dev/null
+ ln -s /sbin/lvm-cleanup /pre-pivot/31-lvm-cleanup.sh 2>/dev/null
+ fi
+ unset lvmwritten
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ -e /etc/lvm/lvm.conf ] && getarg rd_NO_LVMCONF; then
rm -f /etc/lvm/lvm.conf
fi
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# No mdadm? No mdraid support.
type -P mdadm >/dev/null || exit 1
[[ $1 = '-h' ]] && {
rootdev=$(find_root_block_device)
if [[ $rootdev ]]; then
- # root lives on a block device, so we can be more precise about
- # hostonly checking
- check_block_and_slaves is_mdraid "$rootdev" || exit 1
+ # root lives on a block device, so we can be more precise about
+ # hostonly checking
+ check_block_and_slaves is_mdraid "$rootdev" || exit 1
else
- # root is not on a block device, use the shotgun approach
- blkid | egrep -q '(linux|isw)_raid' || exit 1
+ # root is not on a block device, use the shotgun approach
+ blkid | egrep -q '(linux|isw)_raid' || exit 1
fi
}
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
dracut_install mdadm partx
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
instmods =drivers/md
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
info "rd_NO_MDIMSM: no MD RAID for imsm/isw raids"
udevproperty rd_NO_MDIMSM=1
\ No newline at end of file
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
for f in /initqueue-settled/mdcontainer_start* /initqueue-settled/mdraid_start* /initqueue-settled/mdadm_auto*; do
[ -e $f ] && return 1
done
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
. /lib/dracut-lib.sh
info "Autoassembling MD Raid"
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
. /lib/dracut-lib.sh
md=$1
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# save state dir for mdmon/mdadm for the real root
mkdir /dev/.mdadm
[ -e /var/run/mdadm ] && rm -fr /var/run/mdadm
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
# stop everything which is not busy
for i in /dev/md* /dev/md/*; do
[ -b $i ] || continue
mddetail=$(udevadm info --query=property --name=$i)
case "$mddetail" in
- *MD_LEVEL=container*)
- ;;
- *DEVTYPE=partition*)
- ;;
- *)
- mdadm --stop $i >/dev/null 2>&1
- ;;
+ *MD_LEVEL=container*)
+ ;;
+ *DEVTYPE=partition*)
+ ;;
+ *)
+ mdadm --stop $i >/dev/null 2>&1
+ ;;
esac
done
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
. /lib/dracut-lib.sh
# run mdadm if udev has settled
# there could still be some leftover devices
# which have had a container added
for md in /dev/md[0-9]* /dev/md/*; do
- [ -b "$md" ] || continue
- udevinfo="$(udevadm info --query=env --name=$md)"
- strstr "$udevinfo" "MD_UUID=" && continue
- strstr "$udevinfo" "MD_LEVEL=container" && continue
- strstr "$udevinfo" "DEVTYPE=partition" && continue
- mdadm --run "$md" 2>&1 | vinfo
+ [ -b "$md" ] || continue
+ udevinfo="$(udevadm info --query=env --name=$md)"
+ strstr "$udevinfo" "MD_UUID=" && continue
+ strstr "$udevinfo" "MD_LEVEL=container" && continue
+ strstr "$udevinfo" "DEVTYPE=partition" && continue
+ mdadm --run "$md" 2>&1 | vinfo
done
unset udevinfo
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
if getarg rd_NO_MD; then
info "rd_NO_MD: removing MD RAID activation"
udevproperty rd_NO_MD=1
# rewrite the md rules to only process the specified raid array
if [ -n "$MD_UUID" ]; then
- for f in /etc/udev/rules.d/65-md-incremental*.rules; do
- [ -e "$f" ] || continue
- mv $f ${f}.bak
- while read line; do
- if [ "${line%%UUID CHECK}" != "$line" ]; then
- for uuid in $MD_UUID; do
- printf 'ENV{MD_UUID}=="%s", GOTO="do_md_inc"\n' $uuid
- done;
- printf 'GOTO="md_inc_end"\n';
- else
- echo $line;
- fi
- done < ${f}.bak > $f
- rm ${f}.bak
- done
+ for f in /etc/udev/rules.d/65-md-incremental*.rules; do
+ [ -e "$f" ] || continue
+ mv $f ${f}.bak
+ while read line; do
+ if [ "${line%%UUID CHECK}" != "$line" ]; then
+ for uuid in $MD_UUID; do
+ printf 'ENV{MD_UUID}=="%s", GOTO="do_md_inc"\n' $uuid
+ done;
+ printf 'GOTO="md_inc_end"\n';
+ else
+ echo $line;
+ fi
+ done < ${f}.bak > $f
+ rm ${f}.bak
+ done
fi
fi
fi
if getarg rd_NO_MDADMCONF; then
- rm -f /etc/mdadm/mdadm.conf /etc/mdadm.conf
+ rm -f /etc/mdadm/mdadm.conf /etc/mdadm.conf
fi
# noiswmd nodmraid for anaconda / rc.sysinit compatibility
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# if there's no multipath binary, no go.
type -P multipath >/dev/null || exit 1
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
for f in \
/sbin/dmsetup \
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
mp_mod_test() {
local mpfuncs='scsi_register_device_handler|dm_dirty_log_type_register|dm_register_path_selector|dm_register_target'
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ -e /etc/multipath.conf ]; then
HARD=""
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ -e /etc/multipath.conf -a -e /etc/multipath/wwids ]; then
modprobe dm-multipath
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
arch=$(uname -m)
[ "$arch" = "s390" -o "$arch" = "s390x" ] || exit 1
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
inst_hook cmdline 30 "$moddir/parse-dasd.sh"
dracut_install tr dasdinfo dasdconf.sh
if [[ $hostonly ]]; then
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
instmods dasd_mod dasd_eckd_mod dasd_fba_mod dasd_diag_mod
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
for dasd_arg in $(getargs 'rd_DASD='); do
(
IFS=","
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
arch=$(uname -m)
[ "$arch" = "s390" -o "$arch" = "s390x" ] || exit 1
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
inst_hook cmdline 31 "$moddir/parse-dasd-mod.sh"
dracut_install dasd_cio_free grep sed seq
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
instmods dasd_mod dasd_eckd_mod dasd_fba_mod dasd_diag_mod
-
+
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
[ -d /etc/modprobe.d ] || mkdir /etc/modprobe.d
dasd_arg=$(getarg rd_DASD_MOD=)
if [ -n "$dasd_arg" ]; then
- echo "options dasd_mod dasd=$dasd_arg" >> /etc/modprobe.d/dasd_mod.conf
+ echo "options dasd_mod dasd=$dasd_arg" >> /etc/modprobe.d/dasd_mod.conf
fi
unset dasd_arg
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# do not add this module by default
exit 1
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
dracut_install -o ps grep more cat rm strace free showmount
dracut_install -o ping netstat rpcinfo vi scp ping6 ssh
dracut_install -o fsck fsck.ext2 fsck.ext4 fsck.ext3 fsck.ext4dev fsck.vfat
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# We depend on network modules being loaded
[ "$1" = "-d" ] && echo network
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# We use (fcoe_interface or fcoe_mac) and fcoe_dcb as set by parse-fcoe.sh
# If neither mac nor interface are set we don't continue
# Write udev rules
{
if [ -n "$fcoe_mac" ] ; then
- printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="/sbin/initqueue --onetime --unique --name fcoe-up-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s"\n' "$fcoe_mac" "$fcoe_dcb"
+ printf 'ACTION=="add", SUBSYSTEM=="net", ATTR{address}=="%s", RUN+="/sbin/initqueue --onetime --unique --name fcoe-up-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s"\n' "$fcoe_mac" "$fcoe_dcb"
else
- printf 'ACTION=="add", SUBSYSTEM=="net", NAME=="%s", RUN+="/sbin/initqueue --onetime --unique --name fcoe-up-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s"\n' "$fcoe_interface" "$fcoe_dcb"
+ printf 'ACTION=="add", SUBSYSTEM=="net", NAME=="%s", RUN+="/sbin/initqueue --onetime --unique --name fcoe-up-$env{INTERFACE} /sbin/fcoe-up $env{INTERFACE} %s"\n' "$fcoe_interface" "$fcoe_dcb"
fi
} > /etc/udev/rules.d/60-fcoe.rules
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# We get called like this:
# /sbin/fcoe-up <network-device> <dcb|nodcb>
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
dracut_install ip
inst dcbtool
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
instmods fcoe 8021q
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Supported formats:
# fcoe=<networkdevice>:<dcb|nodcb>
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
# We depend on network modules being loaded
[ "$1" = "-d" ] && echo network
[[ -L /sys/dev/block/$1 ]] || return
cd "$(readlink -f /sys/dev/block/$1)"
until [[ -d sys || -d iscsi_session ]]; do
- cd ..
+ cd ..
done
[[ -d iscsi_session ]]
)
case $1 in
-h) rootdev=$(find_root_block_device)
- if [[ $rootdev ]]; then
- # root lives on a block device, so we can be more precise about
- # hostonly checking
- check_block_and_slaves is_iscsi "$rootdev" || exit 1
- else
- exit 1
- fi ;;
+ if [[ $rootdev ]]; then
+ # root lives on a block device, so we can be more precise about
+ # hostonly checking
+ check_block_and_slaves is_iscsi "$rootdev" || exit 1
+ else
+ exit 1
+ fi ;;
esac
exit 0
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
dracut_install umount
inst iscsistart
inst hostname
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
instmods iscsi_tcp crc32c iscsi_ibft
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# This implementation is incomplete: Discovery mode is not implemented and
# the argument handling doesn't follow currently agreed formats. This is mainly
if getarg iscsi_firmware ; then
if [ -n "${root%%block:*}" ]; then
# if root is not specified try to mount the whole iSCSI LUN
- printf 'ENV{DEVTYPE}!="partition", SYMLINK=="disk/by-path/*-iscsi-*-*", SYMLINK+="root"\n' >> /etc/udev/rules.d/99-iscsi-root.rules
+ printf 'ENV{DEVTYPE}!="partition", SYMLINK=="disk/by-path/*-iscsi-*-*", SYMLINK+="root"\n' >> /etc/udev/rules.d/99-iscsi-root.rules
fi
iscsistart -b
exit 0
IFS=@
set $iroot
if [ $# -gt 1 ]; then
- authinfo=$1; shift
- iroot=$*
+ authinfo=$1; shift
+ iroot=$*
# allow empty authinfo to allow having an @ in iscsi_target_name like this:
# netroot=iscsi:@192.168.1.100::3260::iqn.2009-01.com.example:testdi@sk
- if [ -n "$authinfo" ]; then
+ if [ -n "$authinfo" ]; then
IFS=:
set $authinfo
iscsi_username=$1
iscsi_password=$2
if [ $# -gt 2 ]; then
- iscsi_in_username=$3
- iscsi_in_password=$4
+ iscsi_in_username=$3
+ iscsi_in_password=$4
fi
- fi
+ fi
fi
IFS="$OLDIFS"
local i
set --
while [ -n "$v" ]; do
- if [ "${v#\[*:*:*\]:}" != "$v" ]; then
- # handle IPv6 address
- i="${v%%\]:*}"
- i="${i##\[}"
- set -- "$@" "$i"
- v=${v#\[$i\]:}
- else
- set -- "$@" "${v%%:*}"
- v=${v#*:}
- fi
+ if [ "${v#\[*:*:*\]:}" != "$v" ]; then
+ # handle IPv6 address
+ i="${v%%\]:*}"
+ i="${i##\[}"
+ set -- "$@" "$i"
+ v=${v#\[$i\]:}
+ else
+ set -- "$@" "${v%%:*}"
+ v=${v#*:}
+ fi
done
iscsi_target_ip=$1; shift
iscsi_protocol=$1; shift # ignored
if [ -z $iscsi_initiator ]; then
# XXX Where are these from?
- [ -f /etc/initiatorname.iscsi ] && . /etc/initiatorname.iscsi
- [ -f /etc/iscsi/initiatorname.iscsi ] && . /etc/iscsi/initiatorname.iscsi
- iscsi_initiator=$InitiatorName
+ [ -f /etc/initiatorname.iscsi ] && . /etc/initiatorname.iscsi
+ [ -f /etc/iscsi/initiatorname.iscsi ] && . /etc/iscsi/initiatorname.iscsi
+ iscsi_initiator=$InitiatorName
# XXX rfc3720 says 'SCSI Initiator Name: The iSCSI Initiator Name specifies
# the worldwide unique name of the initiator.' Could we use hostname/ip
fi
if [ -z $iscsi_target_port ]; then
- iscsi_target_port=3260
+ iscsi_target_port=3260
fi
if [ -z $iscsi_target_group ]; then
- iscsi_target_group=1
+ iscsi_target_group=1
fi
if [ -z $iscsi_initiator ]; then
# XXX is this correct?
- iscsi_initiator=$(iscsi-iname)
+ iscsi_initiator=$(iscsi-iname)
fi
if [ -z $iscsi_lun ]; then
- iscsi_lun=0
+ iscsi_lun=0
fi
echo "InitiatorName='$iscsi_initiator'" > /dev/.initiatorname.iscsi
if [ -n "${root%%block:*}" ]; then
# if root is not specified try to mount the whole iSCSI LUN
- printf 'SYMLINK=="disk/by-path/*-iscsi-*-%s", SYMLINK+="root"\n' $iscsi_lun >> /etc/udev/rules.d/99-iscsi-root.rules
+ printf 'SYMLINK=="disk/by-path/*-iscsi-*-%s", SYMLINK+="root"\n' $iscsi_lun >> /etc/udev/rules.d/99-iscsi-root.rules
fi
# inject new exit_if_exists
# force udevsettle to break
> /initqueue/work
- iscsistart -i $iscsi_initiator -t $iscsi_target_name \
- -g $iscsi_target_group -a $iscsi_target_ip \
- -p $iscsi_target_port \
- ${iscsi_username+-u $iscsi_username} \
- ${iscsi_password+-w $iscsi_password} \
- ${iscsi_in_username+-U $iscsi_in_username} \
- ${iscsi_in_password+-W $iscsi_in_password} || :
+ iscsistart -i $iscsi_initiator -t $iscsi_target_name \
+ -g $iscsi_target_group -a $iscsi_target_ip \
+ -p $iscsi_target_port \
+ ${iscsi_username+-u $iscsi_username} \
+ ${iscsi_password+-w $iscsi_password} \
+ ${iscsi_in_username+-U $iscsi_in_username} \
+ ${iscsi_in_password+-W $iscsi_in_password} || :
# install mount script
if [ -n "${root%%block:*}" ]; then
# if root is not specified try to mount the whole iSCSI LUN
- echo "iscsi_lun=$iscsi_lun . /bin/mount-lun.sh " > /mount/01-$$-iscsi.sh
+ echo "iscsi_lun=$iscsi_lun . /bin/mount-lun.sh " > /mount/01-$$-iscsi.sh
fi
}
if getarg netroot; then
for nroot in $(getargs netroot); do
[ "${netroot%%:*}" = "iscsi" ] || continue
- handle_netroot ${nroot##iscsi:}
+ handle_netroot ${nroot##iscsi:}
done
else
handle_netroot $iroot
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
if [ -z $iscsi_lun ]; then
iscsi_lun=0
fi
NEWROOT=${NEWROOT:-"/sysroot"}
for disk in /dev/disk/by-path/*-iscsi-*-$iscsi_lun; do
- if mount -t ${fstype:-auto} -o "$rflags" $disk $NEWROOT; then
- if [ ! -d /sysroot/proc ]; then
- umount $disk
- continue
- fi
- break
- fi
+ if mount -t ${fstype:-auto} -o "$rflags" $disk $NEWROOT; then
+ if [ ! -d /sysroot/proc ]; then
+ umount $disk
+ continue
+ fi
+ break
+ fi
done
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Preferred format:
-# root=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
-# [root=*] netroot=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
+#
root=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
+#
[root=*] netroot=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
#
# Legacy formats:
-# [net]root=[iscsi] iscsiroot=[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
-# [net]root=[iscsi] iscsi_firmware
+#
[net]root=[iscsi] iscsiroot=[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
+# [net]root=[iscsi] iscsi_firmware
#
# root= takes precedence over netroot= if root=iscsi[...]
#
# Root takes precedence over netroot
if [ "${root%%:*}" = "iscsi" ] ; then
if [ -n "$netroot" ] ; then
- echo "Warning: root takes precedence over netroot. Ignoring netroot"
+ echo "Warning: root takes precedence over netroot. Ignoring netroot"
fi
netroot=$root
# Accept iscsiroot argument?
[ -z "$netroot" ] || [ "$netroot" = "iscsi" ] || \
- die "Argument iscsiroot only accepted for empty root= or [net]root=iscsi"
+ die "Argument iscsiroot only accepted for empty root= or [net]root=iscsi"
# Override root with iscsiroot content?
[ -z "$netroot" ] || [ "$netroot" = "iscsi" ] && netroot=iscsi:$iscsiroot
# Check required arguments. there's only one, but it's at the end
if [ -z "$iscsi_firmware" ] ; then
case "${netroot##iscsi:*:*:*:*:}" in
- $netroot|'') die "Argument targetname for iscsiroot is missing";;
+ $netroot|'') die "Argument targetname for iscsiroot is missing";;
esac
fi
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# We depend on network modules being loaded
[ "$1" = "-d" ] && echo network
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
inst nbd-client
inst_hook cmdline 90 "$moddir/parse-nbdroot.sh"
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
instmods nbd
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
. /lib/dracut-lib.sh
# add the udev rules for mounting the nbd0 device
if [ ! -e /etc/udev/rules.d/99-mount.rules ]; then
echo '[ -e /dev/root ] || { info=$(udevadm info --query=env --name=/dev/nbd0); [ -z "${info%%*ID_FS_TYPE*}" ] && { ln -s /dev/nbd0 /dev/root 2>/dev/null; :; };} && rm $job;' \
- > /initqueue-settled/nbd.sh
+ > /initqueue-settled/nbd.sh
printf '/bin/mount -t %s -o %s %s %s\n' \
- "$nbdfstype" "$fsopts" /dev/nbd0 "$NEWROOT" \
- > /mount/01-$$-nbd.sh
+ "$nbdfstype" "$fsopts" /dev/nbd0 "$NEWROOT" \
+ > /mount/01-$$-nbd.sh
fi
# NBD doesn't emit uevents when it gets connected, so kick it
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Preferred format:
-# root=nbd:srv:port[:fstype[:rootflags[:nbdopts]]]
-# [root=*] netroot=nbd:srv:port[:fstype[:rootflags[:nbdopts]]]
+# root=nbd:srv:port[:fstype[:rootflags[:nbdopts]]]
+# [root=*] netroot=nbd:srv:port[:fstype[:rootflags[:nbdopts]]]
#
# nbdopts is a comma seperated list of options to give to nbd-client
#
# Root takes precedence over netroot
if [ "${root%%:*}" = "nbd" ] ; then
if [ -n "$netroot" ] ; then
- warn "root takes precedence over netroot. Ignoring netroot"
+ warn "root takes precedence over netroot. Ignoring netroot"
fi
netroot=$root
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
# We depend on network modules being loaded
[ "$1" = "-d" ] && echo network
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
type -P portmap >/dev/null && dracut_install portmap
type -P rpcbind >/dev/null && dracut_install rpcbind
dracut_install sed
for i in {"$libdir","$usrlibdir"}/libnfsidmap_nsswitch.so* \
- {"$libdir","$usrlibdir"}/libnfsidmap/*.so \
- {"$libdir","$usrlibdir"}/libnfsidmap*.so*; do
+ {"$libdir","$usrlibdir"}/libnfsidmap/*.so \
+ {"$libdir","$usrlibdir"}/libnfsidmap*.so*; do
[ -e "$i" ] && dracut_install "$i"
done
nsslibs=$(sed -e '/^#/d' -e 's/^.*://' -e 's/\[NOTFOUND=return\]//' /etc/nsswitch.conf \
- | tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
+ | tr -s '[:space:]' '\n' | sort -u | tr -s '[:space:]' '|')
nsslibs=${nsslibs#|}
nsslibs=${nsslibs%|}
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
instmods nfs sunrpc ipv6
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
. /lib/dracut-lib.sh
if [ -z "$server" ] ; then
# XXX new_dhcp_next_server is unconfirmed this is an assumption
for var in $srv $new_dhcp_server_identifier $new_dhcp_next_server $new_root_path '' ; do
- [ -n "$var" ] && server=$var && break;
+ [ -n "$var" ] && server=$var && break;
done
# XXX This blindly assumes that if new_root_path has to used that
# XXX Should we loop here?
mount -t nfs4 -o$options${nfslock+,$nfslock} \
- $server:$path $NEWROOT \
- && { [ -e /dev/root ] || >/dev/root ; }
+ $server:$path $NEWROOT \
+ && { [ -e /dev/root ] || >/dev/root ; }
else
# NFSv{2,3} doesn't support using locks as it requires a helper to transfer
# the rpcbind state to the new root
# XXX Should we loop here?
{ mount -t nfs -o$options${options:+,}nolock,nfsvers=3 $server:$path $NEWROOT || \
- mount -t nfs -o$options${options:+,}nolock,nfsvers=2 $server:$path $NEWROOT ; } \
- && { [ -e /dev/root ] || >/dev/root ; }
+ mount -t nfs -o$options${options:+,}nolock,nfsvers=2 $server:$path $NEWROOT ; } \
+ && { [ -e /dev/root ] || >/dev/root ; }
fi
# inject new exit_if_exists
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
[ -f /tmp/nfs.rpc_pipefs_path ] && rpcpipefspath=`cat /tmp/nfs.rpc_pipefs_path`
[ -z "$rpcpipefspath" ] && rpcpipefspath=var/lib/nfs/rpc_pipefs
[ -d $NEWROOT/$rpcpipefspath ] || mkdir -p $NEWROOT/$rpcpipefspath 2>/dev/null
if [ -d $NEWROOT/$rpcpipefspath ]; then
- mount --move /var/lib/nfs/rpc_pipefs $NEWROOT/$rpcpipefspath
+ mount --move /var/lib/nfs/rpc_pipefs $NEWROOT/$rpcpipefspath
else
- umount /var/lib/nfs/rpc_pipefs
+ umount /var/lib/nfs/rpc_pipefs
fi
fi
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Preferred format:
-# root=nfs[4]:[server:]path[:options]
+# root=nfs[4]:[server:]path[:options]
#
# This syntax can come from DHCP root-path as well.
#
# Legacy format:
-# root=/dev/nfs nfsroot=[server:]path[,options]
+# root=/dev/nfs nfsroot=[server:]path[,options]
#
# In Legacy root=/dev/nfs mode, if the 'nfsroot' parameter is not given
# on the command line or is empty, the dhcp root-path is used as
#
# If server is unspecified it will be pulled from one of the following
# sources, in order:
-# static ip= option on kernel command line
-# DHCP next-server option
-# DHCP server-id option
+# static ip= option on kernel command line
+# DHCP next-server option
+# DHCP server-id option
# DHCP root-path option
#
# NFSv4 is only used if explicitly requested with nfs4: prefix, otherwise
# @deprecated
warn "Argument nfsroot is deprecated and might be removed in a future release. See http://apps.sourceforge.net/trac/dracut/wiki/commandline for more information."
if [ "$(getarg root=)" != "/dev/nfs" ]; then
- die "Argument nfsroot only accepted for legacy root=/dev/nfs"
+ die "Argument nfsroot only accepted for legacy root=/dev/nfs"
fi
netroot=nfs:$nfsroot;
fi
case "$netroot" in
/dev/nfs) netroot=nfs;;
/dev/*) unset netroot; return;;
-# LEGACY: root=<server-ip>:/<path
+
# LEGACY: root=<server-ip>:/<path
[0-9]*:/*|[0-9]*\.[0-9]*\.[0-9]*[!:]|/*)
- netroot=nfs:$netroot;;
+ netroot=nfs:$netroot;;
esac
# Continue if nfs
if nfsdomain=$(getarg rd_NFS_DOMAIN); then
if [ -f /etc/idmapd.conf ]; then
- sed -i -e \
- "s/^[[:space:]#]*Domain[[:space:]]*=.*/Domain = $nfsdomain/g" \
- /etc/idmapd.conf
+ sed -i -e \
+ "s/^[[:space:]#]*Domain[[:space:]]*=.*/Domain = $nfsdomain/g" \
+ /etc/idmapd.conf
fi
# and even again after the sed, in case it was not yet specified
echo "Domain = $nfsdomain" >> /etc/idmapd.conf
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
inst_hook cmdline 10 "$moddir/parse-resume.sh"
inst_hook pre-udev 30 "$moddir/resume-genrules.sh"
inst_hook mount 10 "$moddir/resume.sh"
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
if resume=$(getarg resume=) && ! getarg noresume; then
export resume
echo "$resume" >/.resume
fi
case "$resume" in
- LABEL=*)
- resume="$(echo $resume | sed 's,/,\\x2f,g')"
- resume="/dev/disk/by-label/${resume#LABEL=}" ;;
- UUID=*)
- resume="/dev/disk/by-uuid/${resume#UUID=}" ;;
+ LABEL=*) \
+ resume="$(echo $resume | sed 's,/,\\x2f,g')"
+ resume="/dev/disk/by-label/${resume#LABEL=}" ;;
+ UUID=*) \
+ resume="/dev/disk/by-uuid/${resume#UUID=}" ;;
esac
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
if [ -n "$resume" ]; then
{
- printf "KERNEL==\"%s\", ACTION==\"add|change\", SYMLINK+=\"/dev/resume\"\n" \
- ${resume#/dev/};
- printf "SYMLINK==\"%s\", ACTION==\"add|change\", SYMLINK+=\"/dev/resume\"\n" \
- ${resume#/dev/};
+ printf "KERNEL==\"%s\", ACTION==\"add|change\", SYMLINK+=\"/dev/resume\"\n" \
+ ${resume#/dev/};
+ printf "SYMLINK==\"%s\", ACTION==\"add|change\", SYMLINK+=\"/dev/resume\"\n" \
+ ${resume#/dev/};
} >> /dev/.udev/rules.d/99-resume-link.rules
{
- printf "KERNEL==\"%s\", ACTION==\"add|change\", ENV{ID_FS_TYPE}==\"suspend|swsuspend|swsupend\", RUN+=\"/bin/sh -c 'echo %%M:%%m > /sys/power/resume'\"\n" \
- ${resume#/dev/};
- printf "SYMLINK==\"%s\", ACTION==\"add|change\", ENV{ID_FS_TYPE}==\"suspend|swsuspend|swsupend\", RUN+=\"/bin/sh -c 'echo %%M:%%m > /sys/power/resume'\"\n" \
- ${resume#/dev/};
+ printf "KERNEL==\"%s\", ACTION==\"add|change\", ENV{ID_FS_TYPE}==\"suspend|swsuspend|swsupend\", RUN+=\"/bin/sh -c 'echo %%M:%%m > /sys/power/resume'\"\n" \
+ ${resume#/dev/};
+ printf "SYMLINK==\"%s\", ACTION==\"add|change\", ENV{ID_FS_TYPE}==\"suspend|swsuspend|swsupend\", RUN+=\"/bin/sh -c 'echo %%M:%%m > /sys/power/resume'\"\n" \
+ ${resume#/dev/};
} >> /etc/udev/rules.d/99-resume.rules
printf '[ -e "%s" ] && { ln -s "%s" /dev/resume; rm "$job"; }\n' \
elif ! getarg noresume; then
{
- echo "SUBSYSTEM==\"block\", ACTION==\"add|change\", ENV{ID_FS_TYPE}==\"suspend|swsuspend|swsupend\"," \
- " RUN+=\"/bin/sh -c 'echo %M:%m > /sys/power/resume'\"";
+ echo "SUBSYSTEM==\"block\", ACTION==\"add|change\", ENV{ID_FS_TYPE}==\"suspend|swsuspend|swsupend\"," \
+ " RUN+=\"/bin/sh -c 'echo %M:%m > /sys/power/resume'\"";
} >> /etc/udev/rules.d/99-resume.rules
fi
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
[ -s /.resume -a -b "$resume" ] && {
# parsing the output of ls is Bad, but until there is a better way...
ls -lH "$resume" | (
- read x x x x maj min x;
- echo "${maj%,}:$min"> /sys/power/resume)
+ read x x x x maj min x;
+ echo "${maj%,}:$min"> /sys/power/resume)
>/.resume
}
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
if [ "${root%%:*}" = "block" ]; then
{
- printf 'KERNEL=="%s", SYMLINK+="root"\n' \
- ${root#block:/dev/}
- printf 'SYMLINK=="%s", SYMLINK+="root"\n' \
- ${root#block:/dev/}
+ printf 'KERNEL=="%s", SYMLINK+="root"\n' \
+ ${root#block:/dev/}
+ printf 'SYMLINK=="%s", SYMLINK+="root"\n' \
+ ${root#block:/dev/}
} >> /dev/.udev/rules.d/99-root.rules
printf '[ -e "%s" ] && { ln -s "%s" /dev/root 2>/dev/null; rm "$job"; }\n' \
- "${root#block:}" "${root#block:}" >> /initqueue-settled/blocksymlink.sh
+ "${root#block:}" "${root#block:}" >> /initqueue-settled/blocksymlink.sh
echo '[ -e /dev/root ]' > /initqueue-finished/block.sh
fi
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
dracut_install umount
inst_hook cmdline 95 "$moddir/parse-block.sh"
inst_hook pre-udev 30 "$moddir/block-genrules.sh"
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
. /lib/dracut-lib.sh
while [ $# -gt 0 ]; do
case $1 in
rw|ro);;
- defaults);;
+ defaults);;
*)
v="$v,${1}";;
esac
&& ROOTFS_MOUNTED=yes
if ! getarg rd_NO_FSTAB \
- && ! getarg rootflags \
- && [ -f "$NEWROOT/etc/fstab" ] \
- && ! [ -L "$NEWROOT/etc/fstab" ]; then
+ && ! getarg rootflags \
+ && [ -f "$NEWROOT/etc/fstab" ] \
+ && ! [ -L "$NEWROOT/etc/fstab" ]; then
# if $NEWROOT/etc/fstab contains special mount options for
# the root filesystem,
# remount it with the proper options
- rootfs="auto"
- rootopts="defaults"
- while read dev mp fs opts rest; do
+ rootfs="auto"
+ rootopts="defaults"
+ while read dev mp fs opts rest; do
# skip comments
[ "${dev%%#*}" != "$dev" ] && continue
if [ "$mp" = "/" ]; then
- rootfs=$fs
- rootopts=$opts
- break
+ rootfs=$fs
+ rootopts=$opts
+ break
fi
- done < "$NEWROOT/etc/fstab"
+ done < "$NEWROOT/etc/fstab"
- rootopts=$(filter_rootopts $rootopts)
+ rootopts=$(filter_rootopts $rootopts)
- if [ -n "$rootopts" ]; then
+ if [ -n "$rootopts" ]; then
umount $NEWROOT
info "Remounting ${root#block:} with -o $rootopts,$rflags"
mount -t "$rootfs" -o "$rflags","$rootopts" \
"${root#block:}" "$NEWROOT" 2>&1 | vinfo
- fi
+ fi
fi
fi
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
case "$root" in
block:LABEL=*|LABEL=*)
- root="${root#block:}"
- root="$(echo $root | sed 's,/,\\x2f,g')"
- root="block:/dev/disk/by-label/${root#LABEL=}"
+ root="${root#block:}"
+ root="$(echo $root | sed 's,/,\\x2f,g')"
+ root="block:/dev/disk/by-label/${root#LABEL=}"
rootok=1 ;;
block:UUID=*|UUID=*)
- root="${root#block:}"
- root="block:/dev/disk/by-uuid/${root#UUID=}"
+ root="${root#block:}"
+ root="block:/dev/disk/by-uuid/${root#UUID=}"
rootok=1 ;;
/dev/*)
- root="block:${root}"
+ root="block:${root}"
rootok=1 ;;
esac
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
# terminfo bits make things work better if you fall into interactive mode
for TERMINFODIR in /lib/terminfo /etc/terminfo /usr/share/terminfo; do
- [ -d ${TERMINFODIR} ] && break
+ [ -d ${TERMINFODIR} ] && break
done
[ -d ${TERMINFODIR} ] && \
- dracut_install $(find ${TERMINFODIR} -type f)
+ dracut_install $(find ${TERMINFODIR} -type f)
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
# FIXME: would be nice if we didn't have to know which rules to grab....
# ultimately, /lib/initramfs/rules.d or somesuch which includes links/copies
# of the rules we want so that we just copy those in would be best
inst_rules "$moddir/61-persistent-storage.rules"
for i in \
-ata_id \
-cdrom_id \
-create_floppy_devices \
-edd_id \
-firmware.sh \
-firmware \
-firmware.agent \
-hotplug.functions \
-fw_unit_symlinks.sh \
-hid2hci \
-path_id \
-scsi_id \
-usb_id \
-vol_id \
-pcmcia-socket-startup \
-pcmcia-check-broken-cis \
-; do
+ ata_id \
+ cdrom_id \
+ create_floppy_devices \
+ edd_id \
+ firmware.sh \
+ firmware \
+ firmware.agent \
+ hotplug.functions \
+ fw_unit_symlinks.sh \
+ hid2hci \
+ path_id \
+ scsi_id \
+ usb_id \
+ vol_id \
+ pcmcia-socket-startup \
+ pcmcia-check-broken-cis \
+ ; do
[ -e /lib/udev/$i ] && dracut_install /lib/udev/$i
done
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
# Implement blacklisting for udev-loaded modules
modprobe -b "$@"
-
-# vim: set et ts=4:
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
[ -x /usr/sbin/resume ] || [ -x /usr/lib/suspend/resume ]
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
for bin in /usr/sbin/resume /usr/lib/suspend/resume
do
[ -x "${bin}" ] && break
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
if resume=$(getarg resume=) && ! getarg noresume; then
export resume
else
fi
case "$resume" in
- LABEL=*)
- resume="$(echo $resume | sed 's,/,\\x2f,g')"
- resume="/dev/disk/by-label/${resume#LABEL=}" ;;
- UUID=*)
- resume="/dev/disk/by-uuid/${resume#UUID=}" ;;
+ LABEL=*) \
+ resume="$(echo $resume | sed 's,/,\\x2f,g')"
+ resume="/dev/disk/by-label/${resume#LABEL=}" ;;
+ UUID=*) \
+ resume="/dev/disk/by-uuid/${resume#UUID=}" ;;
esac
if splash=$(getarg splash=); then
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
case "$splash" in
quiet )
- a_splash="-P splash=y"
- ;;
+ a_splash="-P splash=y"
+ ;;
* )
- a_splash="-P splash=n"
- ;;
+ a_splash="-P splash=n"
+ ;;
esac
if [ -n "$resume" ]; then
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
arch=$(uname -m)
[ "$arch" = "s390" -o "$arch" = "s390x" ] || exit 1
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
inst_hook cmdline 30 "$moddir/parse-zfcp.sh"
dracut_install tr
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
instmods zfcp
-
+
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
getarg rd_NO_ZFCPCONF && rm /etc/zfcp.conf
for zfcp_arg in $(getargs 'rd_ZFCP='); do
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# config file syntax:
# deviceno WWPN FCPLUN
PATH=/bin:/usr/bin:/sbin:/usr/sbin
if [ -f "$CONFIG" ]; then
- if [ ! -d /sys/bus/ccw/drivers/zfcp ]; then
- modprobe zfcp
- fi
- if [ ! -d /sys/bus/ccw/drivers/zfcp ]; then
- return
- fi
- tr "A-Z" "a-z" < $CONFIG| while read line; do
- case $line in
- \#*) ;;
- *)
- [ -z "$line" ] && continue
- set $line
- if [ $# -eq 5 ]; then
- DEVICE=$1
- SCSIID=$2
- WWPN=$3
- SCSILUN=$4
- FCPLUN=$5
- echo "Warning: Deprecated values in /etc/zfcp.conf, ignoring SCSI ID $SCSIID and SCSI LUN $SCSILUN"
- elif [ $# -eq 3 ]; then
- DEVICE=${1##*0x}
- WWPN=$2
- FCPLUN=$3
- fi
- echo 1 > /sys/bus/ccw/drivers/zfcp/${DEVICE}/online
- [ ! -d /sys/bus/ccw/drivers/zfcp/${DEVICE}/${WWPN}/${FCPLUN} ] \
- && echo $FCPLUN > /sys/bus/ccw/drivers/zfcp/${DEVICE}/${WWPN}/unit_add
- ;;
- esac
- done
+ if [ ! -d /sys/bus/ccw/drivers/zfcp ]; then
+ modprobe zfcp
+ fi
+ if [ ! -d /sys/bus/ccw/drivers/zfcp ]; then
+ return
+ fi
+ tr "A-Z" "a-z" < $CONFIG| while read line; do
+ case $line in
+ \#*) ;;
+ *)
+ [ -z "$line" ] && continue
+ set $line
+ if [ $# -eq 5 ]; then
+ DEVICE=$1
+ SCSIID=$2
+ WWPN=$3
+ SCSILUN=$4
+ FCPLUN=$5
+ echo "Warning: Deprecated values in /etc/zfcp.conf, ignoring SCSI ID $SCSIID and SCSI LUN $SCSILUN"
+ elif [ $# -eq 3 ]; then
+ DEVICE=${1##*0x}
+ WWPN=$2
+ FCPLUN=$3
+ fi
+ echo 1 > /sys/bus/ccw/drivers/zfcp/${DEVICE}/online
+ [ ! -d /sys/bus/ccw/drivers/zfcp/${DEVICE}/${WWPN}/${FCPLUN} ] \
+ && echo $FCPLUN > /sys/bus/ccw/drivers/zfcp/${DEVICE}/${WWPN}/unit_add
+ ;;
+ esac
+ done
fi
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
arch=$(uname -m)
[ "$arch" = "s390" -o "$arch" = "s390x" ] || exit 1
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
inst_hook cmdline 30 "$moddir/parse-ccw.sh"
inst /lib/udev/ccw_init
inst_rules 81-ccw.rules
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
for ccw_arg in $(getargs 'rd_CCW=') $(getargs 'rd_ZNET='); do
echo $ccw_arg >> /etc/ccw.conf
done
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
[[ $1 = '-h' ]] && {
[ -x "/usr/sbin/load_policy" -o -x "/sbin/load_policy" ] || exit 1
exit 0
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
inst_hook pre-pivot 50 "$moddir/selinux-loadpolicy.sh"
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
# FIXME: load selinux policy. this should really be done after we switchroot
rd_load_policy()
permissive=0
getarg "enforcing=0" > /dev/null
if [ $? -eq 0 -o "$SELINUX" = "permissive" ]; then
- permissive=1
+ permissive=1
fi
# Attempt to load SELinux Policy
if [ -x "$NEWROOT/usr/sbin/load_policy" -o -x "$NEWROOT/sbin/load_policy" ]; then
- local ret=0
- local out
- info "Loading SELinux policy"
+ local ret=0
+ local out
+ info "Loading SELinux policy"
# load_policy does mount /proc and /selinux in
# libselinux,selinux_init_load_policy()
if [ -x "$NEWROOT/sbin/load_policy" ]; then
out=$(chroot "$NEWROOT" /sbin/load_policy -i 2>&1)
ret=$?
- info $out
+ info $out
else
- out=$(chroot "$NEWROOT" /usr/sbin/load_policy -i 2>&1)
- ret=$?
- info $out
+ out=$(chroot "$NEWROOT" /usr/sbin/load_policy -i 2>&1)
+ ret=$?
+ info $out
fi
- if [ "$SELINUX" = "disabled" ]; then
- return 0;
- fi
+ if [ "$SELINUX" = "disabled" ]; then
+ return 0;
+ fi
- if [ $ret -eq 0 -o $ret -eq 2 ]; then
- # If machine requires a relabel, force to permissive mode
- [ -e "$NEWROOT"/.autorelabel ] && ( echo 0 > "$NEWROOT"/selinux/enforce )
+ if [ $ret -eq 0 -o $ret -eq 2 ]; then
+ # If machine requires a relabel, force to permissive mode
+ [ -e "$NEWROOT"/.autorelabel ] && ( echo 0 > "$NEWROOT"/selinux/enforce )
mount --bind /dev "$NEWROOT/dev"
chroot "$NEWROOT" /sbin/restorecon -R /dev
- return 0
- fi
+ return 0
+ fi
- warn "Initial SELinux policy load failed."
- if [ $ret -eq 3 -o $permissive -eq 0 ]; then
- warn "Machine in enforcing mode."
- warn "Not continuing"
- sleep 100d
- exit 1
- fi
- return 0
+ warn "Initial SELinux policy load failed."
+ if [ $ret -eq 3 -o $permissive -eq 0 ]; then
+ warn "Machine in enforcing mode."
+ warn "Not continuing"
+ sleep 100d
+ exit 1
+ fi
+ return 0
elif [ $permissive -eq 0 -a "$SELINUX" != "disabled" ]; then
- warn "Machine in enforcing mode and cannot execute load_policy."
- warn "To disable selinux, add selinux=0 to the kernel command line."
- warn "Not continuing"
- sleep 100d
- exit 1
+ warn "Machine in enforcing mode and cannot execute load_policy."
+ warn "To disable selinux, add selinux=0 to the kernel command line."
+ warn "Not continuing"
+ sleep 100d
+ exit 1
fi
}
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# do not add this module by default
exit 255
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
if type -P rsyslogd >/dev/null; then
- installs="rsyslogd /lib/rsyslog/lmnet.so /lib/rsyslog/imklog.so /lib/rsyslog/imuxsock.so"
+ installs="rsyslogd /lib/rsyslog/lmnet.so /lib/rsyslog/imklog.so /lib/rsyslog/imuxsock.so"
elif type -P syslogd >/dev/null; then
installs="syslogd"
elif type -P syslog-ng >/dev/null; then
dwarn "Could not find any syslog binary although the syslogmodule is selected to be installed. Please check."
fi
if [ -n "$installs" ]; then
- dracut_install cat
- dracut_install $installs
- inst_hook cmdline 90 "$moddir/parse-syslog-opts.sh"
- inst_hook pre-udev 61 "$moddir/syslog-genrules.sh"
- inst_hook pre-pivot 99 "$moddir/syslog-cleanup.sh"
- inst_simple "$moddir/rsyslogd-start.sh" /sbin/rsyslogd-start
- inst_simple "$moddir/rsyslogd-stop.sh" /sbin/rsyslogd-stop
- mkdir -p ${initdir}/etc/templates
- inst_simple "${moddir}/rsyslog.conf" /etc/templates
+ dracut_install cat
+ dracut_install $installs
+ inst_hook cmdline 90 "$moddir/parse-syslog-opts.sh"
+ inst_hook pre-udev 61 "$moddir/syslog-genrules.sh"
+ inst_hook pre-pivot 99 "$moddir/syslog-cleanup.sh"
+ inst_simple "$moddir/rsyslogd-start.sh" /sbin/rsyslogd-start
+ inst_simple "$moddir/rsyslogd-stop.sh" /sbin/rsyslogd-stop
+ mkdir -p ${initdir}/etc/templates
+ inst_simple "${moddir}/rsyslog.conf" /etc/templates
fi
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
# Parses the syslog commandline options
#
#Bootparameters:
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
# Triggered by udev and starts rsyslogd with bootparameters
. /lib/dracut-lib.sh
rsyslog_config() {
- local server=$1
- shift
- local syslog_template=$1
- shift
+ local server=$1
+ shift
+ local syslog_template=$1
+ shift
local filters=$*
local filter=
cat $syslog_template
- for filter in $filters; do
- echo "${filter} @${server}"
+ for filter in $filters; do
+ echo "${filter} @${server}"
done
-# echo "*.* /tmp/syslog"
+# echo "*.* /tmp/syslog"
}
read server < /tmp/syslog.server
template=/etc/templates/rsyslog.conf
if [ -n "$server" ]; then
- rsyslog_config "$server" "$template" "$filters" > $conf
- /sbin/rsyslogd -c3
+ rsyslog_config "$server" "$template" "$filters" > $conf
+ /sbin/rsyslogd -c3
fi
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
# Kills rsyslogd
if [ -f /var/run/syslogd.pid ]; then
- read pid < /var/run/syslogd.pid
- kill $pid
- kill -0 $pid && kill -9 $pid
+ read pid < /var/run/syslogd.pid
+ kill $pid
+ kill -0 $pid && kill -9 $pid
else
warn "rsyslogd-stop: Could not find a pid for rsyslogd. Won't kill it."
fi
\ No newline at end of file
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
# Just cleans up a previously started syslogd
. /lib/dracut-lib.sh
if [ -f /tmp/syslog.server ]; then
- read syslogtype < /tmp/syslog.type
- if [ -e "/sbin/${syslogtype}-stop" ]; then
- ${syslogtype}-stop
- else
- warn "syslog-cleanup: Could not find script to stop syslog of type \"$syslogtype\". Syslog will not be stopped."
- fi
+ read syslogtype < /tmp/syslog.type
+ if [ -e "/sbin/${syslogtype}-stop" ]; then
+ ${syslogtype}-stop
+ else
+ warn "syslog-cleanup: Could not find script to stop syslog of type \"$syslogtype\". Syslog will not be stopped."
+ fi
fi
\ No newline at end of file
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
# Creates the syslog udev rules to be triggered when interface becomes online.
. /lib/dracut-lib.sh
detect_syslog() {
syslogtype=""
if [ -e /sbin/rsyslogd ]; then
- syslogtype="rsyslogd"
+ syslogtype="rsyslogd"
elif [ -e /sbin/syslogd ]; then
- syslogtype="syslogd"
+ syslogtype="syslogd"
elif [ /sbin/syslog-ng ]; then
- syslogtype="syslog-ng"
+ syslogtype="syslog-ng"
else
- dwarn "Could not find any syslog binary although the syslogmodule is selected to be installed. Please check."
+ dwarn "Could not find any syslog binary although the syslogmodule is selected to be installed. Please check."
fi
echo "$syslogtype"
[ -n "$syslogtype" ]
-}
+}
read syslogtype < /tmp/syslog.type
if [ -z "$syslogtype" ]; then
- syslogtype=$(detect_syslog)
- echo $syslogtype > /tmp/syslog.type
+ syslogtype=$(detect_syslog)
+ echo $syslogtype > /tmp/syslog.type
fi
if [ -e "/sbin/${syslogtype}-start" ]; then
- printf 'ACTION=="online", SUBSYSTEM=="net", RUN+="/sbin/initqueue --onetime /sbin/'${syslogtype}'-start $env{INTERFACE}"\n' > /etc/udev/rules.d/70-syslog.rules
+ printf 'ACTION=="online", SUBSYSTEM=="net", RUN+="/sbin/initqueue --onetime /sbin/'${syslogtype}'-start $env{INTERFACE}"\n' > /etc/udev/rules.d/70-syslog.rules
else
- warn "syslog-genrules: Could not find binary to start syslog of type \"$syslogtype\". Syslog will not be started."
+ warn "syslog-genrules: Could not find binary to start syslog of type \"$syslogtype\". Syslog will not be started."
fi
#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
[[ $1 = -d ]] && echo udev-rules
exit 0
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# returns OK if $1 contains $2
strstr() {
- [ "${1#*$2*}" != "$1" ]
+ [ "${1#*$2*}" != "$1" ]
}
getarg() {
CMDLINE_ETC="$CMDLINE_ETC $line";
done </etc/cmdline;
fi
- read CMDLINE </proc/cmdline;
- CMDLINE="$CMDLINE $CMDLINE_ETC"
+ read CMDLINE </proc/cmdline;
+ CMDLINE="$CMDLINE $CMDLINE_ETC"
fi
for o in $CMDLINE; do
- if [ "$o" = "$1" ]; then
+ if [ "$o" = "$1" ]; then
[ "$RDDEBUG" = "yes" ] && set -x;
- return 0;
+ return 0;
fi
[ "${o%%=*}" = "${1%=}" ] && val=${o#*=};
done
if [ -n "$val" ]; then
echo $val;
[ "$RDDEBUG" = "yes" ] && set -x;
- return 0;
+ return 0;
fi
[ "$RDDEBUG" = "yes" ] && set -x
return 1
set +x
local o line found
if [ -z "$CMDLINE" ]; then
- if [ -e /etc/cmdline ]; then
+ if [ -e /etc/cmdline ]; then
while read line; do
CMDLINE_ETC="$CMDLINE_ETC $line";
done </etc/cmdline;
fi
- read CMDLINE </proc/cmdline;
- CMDLINE="$CMDLINE $CMDLINE_ETC"
+ read CMDLINE </proc/cmdline;
+ CMDLINE="$CMDLINE $CMDLINE_ETC"
fi
for o in $CMDLINE; do
- if [ "$o" = "$1" ]; then
- [ "$RDDEBUG" = "yes" ] && set -x;
- return 0;
- fi
- if [ "${o%%=*}" = "${1%=}" ]; then
- echo -n "${o#*=} ";
- found=1;
- fi
+ if [ "$o" = "$1" ]; then
+ [ "$RDDEBUG" = "yes" ] && set -x;
+ return 0;
+ fi
+ if [ "${o%%=*}" = "${1%=}" ]; then
+ echo -n "${o#*=} ";
+ found=1;
+ fi
done
if [ -n "$found" ]; then
[ "$RDDEBUG" = "yes" ] && set -x
- return 0;
+ return 0;
fi
[ "$RDDEBUG" = "yes" ] && set -x
return 1;
tmp="${line#*,${opt}=}"
echo "${tmp%%,*}"
return 0
- ;;
- *,${opt},*) return 0 ;;
+ ;;
+ *,${opt},*) return 0;;
esac
-
return 1
}
RDDEBUG=yes
fi
fi
- export RDDEBUG
+ export RDDEBUG
fi
[ "$RDDEBUG" = "yes" ] && set -x
}
check_quiet() {
if [ -z "$DRACUT_QUIET" ]; then
- DRACUT_QUIET="yes"
- getarg rdinfo && DRACUT_QUIET="no"
- getarg quiet || DRACUT_QUIET="yes"
+ DRACUT_QUIET="yes"
+ getarg rdinfo && DRACUT_QUIET="no"
+ getarg quiet || DRACUT_QUIET="yes"
fi
}
check_quiet
echo "<4>dracut Warning: $@" > /dev/kmsg
[ "$DRACUT_QUIET" != "yes" ] && \
- echo "dracut Warning: $@" >&2
+ echo "dracut Warning: $@" >&2
}
info() {
check_quiet
echo "<6>dracut: $@" > /dev/kmsg
[ "$DRACUT_QUIET" != "yes" ] && \
- echo "dracut: $@"
+ echo "dracut: $@"
}
vinfo() {
local count=0
while [ "${str#*$ch}" != "${str}" ]; do
- str="${str#*$ch}"
- count=$(( $count + 1 ))
+ str="${str#*$ch}"
+ count=$(( $count + 1 ))
done
[ $count -eq $expected ]
[ -z "$str" ] && return;
while read dummy check restofline; do
- [ "$check" = "$str" ] && return 0
+ [ "$check" = "$str" ] && return 0
done < $file
return 1
}
[ -z "$UDEVVERSION" ] && UDEVVERSION=$(udevadm --version)
if [ $UDEVVERSION -ge 143 ]; then
- for i in "$@"; do udevadm control --property=$i; done
+ for i in "$@"; do udevadm control --property=$i; done
else
- for i in "$@"; do udevadm control --env=$i; done
+ for i in "$@"; do udevadm control --env=$i; done
fi
}
wait_for_if_up() {
local cnt=0
while [ $cnt -lt 20 ]; do
- li=$(ip link show $1)
- [ -z "${li##*state UP*}" ] && return 0
- sleep 0.1
- cnt=$(($cnt+1))
+ li=$(ip link show $1)
+ [ -z "${li##*state UP*}" ] && return 0
+ sleep 0.1
+ cnt=$(($cnt+1))
done
return 1
}
# check if we have a server
if strstr "$arg" ':/*' ; then
- server="${arg%%:/*}"
- arg="/${arg##*:/}"
+ server="${arg%%:/*}"
+ arg="/${arg##*:/}"
fi
path="${arg%%:*}"
#Fix kernel legacy style separating path and options with ','
if [ "$path" != "${path#*,}" ] ; then
- options=${path#*,}
- path=${path%%,*}
+ options=${path#*,}
+ path=${path%%,*}
fi
}
local i
set --
while [ -n "$v" ]; do
- if [ "${v#\[*:*:*\]:}" != "$v" ]; then
- # handle IPv6 address
- i="${v%%\]:*}"
- i="${i##\[}"
- set -- "$@" "$i"
- v=${v#\[$i\]:}
- else
- set -- "$@" "${v%%:*}"
- v=${v#*:}
- fi
+ if [ "${v#\[*:*:*\]:}" != "$v" ]; then
+ # handle IPv6 address
+ i="${v%%\]:*}"
+ i="${i##\[}"
+ set -- "$@" "$i"
+ v=${v#\[$i\]:}
+ else
+ set -- "$@" "${v%%:*}"
+ v=${v#*:}
+ fi
done
unset ip srv gw mask hostname dev autoconf
case $# in
- 0) autoconf="error" ;;
- 1) autoconf=$1 ;;
- 2) dev=$1; autoconf=$2 ;;
- *) ip=$1; srv=$2; gw=$3; mask=$4; hostname=$5; dev=$6; autoconf=$7 ;;
+ 0) autoconf="error" ;;
+ 1) autoconf=$1 ;;
+ 2) dev=$1; autoconf=$2 ;;
+ *) ip=$1; srv=$2; gw=$3; mask=$4; hostname=$5; dev=$6; autoconf=$7 ;;
esac
}
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
#
# Licensed under the GPLv2
#
-# Copyright 2008-2009, Red Hat, Inc.
+# Copyright 2008-2010, Red Hat, Inc.
# Harald Hoyer <harald@redhat.com>
# Jeremy Katz <katzj@redhat.com>
wait_for_loginit()
{
if getarg rdinitdebug; then
- set +x
- exec 0<>/dev/console 1<>/dev/console 2<>/dev/console
- # wait for loginit
- i=0
- while [ $i -lt 10 ]; do
- j=$(jobs)
- [ -z "$j" ] && break
- [ -z "${j##*Running*}" ] || break
- sleep 0.1
- i=$(($i+1))
- done
- [ $i -eq 10 ] && kill %1 >/dev/null 2>&1
+ set +x
+ exec 0<>/dev/console 1<>/dev/console 2<>/dev/console
+ # wait for loginit
+ i=0
+ while [ $i -lt 10 ]; do
+ j=$(jobs)
+ [ -z "$j" ] && break
+ [ -z "${j##*Running*}" ] || break
+ sleep 0.1
+ i=$(($i+1))
+ done
+ [ $i -eq 10 ] && kill %1 >/dev/null 2>&1
while pidof -x /sbin/loginit >/dev/null 2>&1; do
for pid in $(pidof -x /sbin/loginit); do
done
HARD="-9"
done
- set -x
+ set -x
fi
}
# try to mount devtmpfs
if ! mount -t devtmpfs -omode=0755 udev /dev >/dev/null 2>&1; then
# if it failed fall back to normal tmpfs
- mount -t tmpfs -omode=0755 udev /dev >/dev/null 2>&1
- # Make some basic devices first, let udev handle the rest
- mknod -m 0666 /dev/null c 1 3
- mknod -m 0666 /dev/ptmx c 5 2
- mknod -m 0600 /dev/console c 5 1
- mknod -m 0660 /dev/kmsg c 1 11
+ mount -t tmpfs -omode=0755 udev /dev >/dev/null 2>&1
+ # Make some basic devices first, let udev handle the rest
+ mknod -m 0666 /dev/null c 1 3
+ mknod -m 0666 /dev/ptmx c 5 2
+ mknod -m 0600 /dev/console c 5 1
+ mknod -m 0660 /dev/kmsg c 1 11
fi
fi
UDEV_QUEUE_EMPTY="udevadm settle --timeout=0"
if [ $UDEVVERSION -lt 140 ]; then
- UDEV_LOG_PRIO_ARG=--log_priority
- UDEV_QUEUE_EMPTY="udevadm settle --timeout=1"
+ UDEV_LOG_PRIO_ARG=--log_priority
+ UDEV_QUEUE_EMPTY="udevadm settle --timeout=1"
fi
getarg rdudevinfo && udevadm control $UDEV_LOG_PRIO_ARG=info
while :; do
check_finished && break
-
+
udevsettle
check_finished && break
if [ -f /initqueue/work ]; then
rm /initqueue/work
fi
-
+
for job in /initqueue/*.sh; do
- [ -e "$job" ] || break
+ [ -e "$job" ] || break
job=$job . $job
check_finished && break 2
done
# which report no medium for quiet
# some time.
for cdrom in /sys/block/sr*; do
- [ -e "$cdrom" ] || continue
- # skip, if cdrom medium was already found
+ [ -e "$cdrom" ] || continue
+ # skip, if cdrom medium was already found
strstr "$(udevadm info --query=env --path=${cdrom##/sys})" \
- ID_CDROM_MEDIA && continue
+ ID_CDROM_MEDIA && continue
echo change > "$cdrom/uevent"
done
while :; do
[ -d "$NEWROOT/proc" ] && break;
for f in /mount/*.sh; do
- [ -f "$f" ] && . "$f"
- [ -d "$NEWROOT/proc" ] && break;
+ [ -f "$f" ] && . "$f"
+ [ -d "$NEWROOT/proc" ] && break;
done
i=$(($i+1))
HARD=""
while pidof udevd >/dev/null 2>&1; do
for pid in $(pidof udevd); do
- kill $HARD $pid >/dev/null 2>&1
+ kill $HARD $pid >/dev/null 2>&1
done
HARD="-9"
done
# Clean up the environment
for i in $(export -p); do
i=${i#declare -x}
- i=${i#export}
- i=${i%%=*}
- [ "$i" = "root" -o "$i" = "PATH" -o "$i" = "HOME" -o "$i" = "TERM" ] || unset $i
+ i=${i#export}
+ i=${i%%=*}
+ [ "$i" = "root" -o "$i" = "PATH" -o "$i" = "HOME" -o "$i" = "TERM" ] || unset $i
done
initargs=""
ignoreargs="console BOOT_IMAGE"
# only pass arguments after init= to the init
CLINE=${CLINE#*init=}
- set $CLINE
- shift
- for x in "$@"; do
- for s in $ignoreargs; do
- [ "${x%%=*}" = $s ] && continue 2
+ set $CLINE
+ shift
+ for x in "$@"; do
+ for s in $ignoreargs; do
+ [ "${x%%=*}" = $s ] && continue 2
+ done
+ initargs="$initargs $x"
done
- initargs="$initargs $x"
- done
- unset CLINE
+ unset CLINE
else
set $CLINE
shift
for x in "$@"; do
case "$x" in
- [0-9]|s|S|single|emergency|auto )
+ [0-9]|s|S|single|emergency|auto ) \
initargs="$initargs $x"
- ;;
+ ;;
esac
done
fi
echo "file a bug against dracut."
emergency_shell
}
-# vim:ts=8:sw=4:sts=4:et
-
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+#
+# Licensed under the GPLv2+
+#
+# Copyright 2008-2010, Red Hat, Inc.
+# Harald Hoyer <harald@redhat.com>
. /lib/dracut-lib.sh
while [ $# -gt 0 ]; do
case "$1" in
- --onetime)
- onetime="yes";;
- --settled)
- settled="-settled";;
- --unique)
- unique="yes";;
- --name)
- name="$2";shift;;
- *)
- break;;
+ --onetime)
+ onetime="yes";;
+ --settled)
+ settled="-settled";;
+ --unique)
+ unique="yes";;
+ --name)
+ name="$2";shift;;
+ *)
+ break;;
esac
shift
done
if [ -z "$unique" ]; then
- job="${name}$$"
+ job="${name}$$"
else
- job="${name:-$1}"
- job=${job##*/}
+ job="${name:-$1}"
+ job=${job##*/}
fi
if [ -n "$onetime" ]; then
- {
- echo '[ -e "$job" ] && rm "$job"'
- echo "$@"
- } > "/tmp/$$-${job}.sh"
+ {
+ echo '[ -e "$job" ] && rm "$job"'
+ echo "$@"
+ } > "/tmp/$$-${job}.sh"
else
- echo "$@" > "/tmp/$$-${job}.sh"
+ echo "$@" > "/tmp/$$-${job}.sh"
fi
mv -f "/tmp/$$-${job}.sh" "/initqueue${settled}/${job}.sh"
-#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
dracut_install mount mknod mkdir pidof sleep chroot sed ls flock cp mv dmesg \
- rm ln mkfifo less
+ rm ln mkfifo less
if [[ ${ignore_kmodules} = yes ]]; then
inst /bin/true
ln -s /bin/true "${initdir}"/sbin/modprobe
dracut_install switch_root
else
inst "$moddir/switch_root" "/sbin/switch_root" \
- || derror "Failed to install switch_root"
+ || derror "Failed to install switch_root"
fi
inst "$moddir/dracut-lib.sh" "/lib/dracut-lib.sh"
inst_hook cmdline 10 "$moddir/parse-root-opts.sh"
inst_hook cmdline 20 "$moddir/parse-blacklist.sh"
mkdir -p "${initdir}/var/run"
+
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
# turn off debugging
set +x
exec 6>/init.log
while read line; do
- echo "<7>dracut: $line" >&5
- # if "quiet" is specified we output to /dev/console
- [ -n "$QUIET" ] && echo "dracut: $line"
- echo "$line" >&6
+ echo "<7>dracut: $line" >&5
+ # if "quiet" is specified we output to /dev/console
+ [ -n "$QUIET" ] && echo "dracut: $line"
+ echo "$line" >&6
done
#!/bin/sh
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
for p in $(getargs rdblacklist=); do
- echo "blacklist $p" >> /etc/modprobe.d/initramfsblacklist.conf
+ echo "blacklist $p" >> /etc/modprobe.d/initramfsblacklist.conf
done
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+
root=$(getarg root=)
if rflags="$(getarg rootflags=)"; then
projects / platform / upstream / dracut.git / commitdiff