OMAP: H4: Port the display driver to new DSS2

Port the old omapfb panel driver to DSS2. This patch changes the board
file only, the driver is ported in separate patch.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 45de2b3..f7c09de 100644 (file)
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -40,6 +40,9 @@
 #include <plat/dma.h>
 #include <plat/gpmc.h>
 
+#include <video/omapdss.h>
+#include <video/omap-panel-generic-dpi.h>
+
 #include "mux.h"
 #include "control.h"
 
@@ -157,17 +160,33 @@ static struct platform_device h4_kp_device = {
        },
 };
 
-static struct platform_device h4_lcd_device = {
-       .name           = "lcd_h4",
-       .id             = -1,
-};
-
 static struct platform_device *h4_devices[] __initdata = {
        &h4_flash_device,
        &h4_kp_device,
+};
+
+static struct panel_generic_dpi_data h4_panel_data = {
+       .name                   = "h4",
+};
+
+static struct omap_dss_device h4_lcd_device = {
+       .name                   = "lcd",
+       .driver_name            = "generic_dpi_panel",
+       .type                   = OMAP_DISPLAY_TYPE_DPI,
+       .phy.dpi.data_lines     = 16,
+       .data                   = &h4_panel_data,
+};
+
+static struct omap_dss_device *h4_dss_devices[] = {
        &h4_lcd_device,
 };
 
+static struct omap_dss_board_info h4_dss_data = {
+       .num_devices    = ARRAY_SIZE(h4_dss_devices),
+       .devices        = h4_dss_devices,
+       .default_device = &h4_lcd_device,
+};
+
 /* 2420 Sysboot setup (2430 is different) */
 static u32 get_sysboot_value(void)
 {
@@ -271,10 +290,6 @@ static void __init h4_init_flash(void)
        h4_flash_resource.end   = base + SZ_64M - 1;
 }
 
-static struct omap_lcd_config h4_lcd_config __initdata = {
-       .ctrl_name      = "internal",
-};
-
 static struct omap_usb_config h4_usb_config __initdata = {
        /* S1.10 OFF -- usb "download port"
         * usb0 switched to Mini-B port and isp1105 transceiver;
@@ -286,10 +301,6 @@ static struct omap_usb_config h4_usb_config __initdata = {
        .hmc_mode       = 0x00,         /* 0:dev|otg 1:disable 2:disable */
 };
 
-static struct omap_board_config_kernel h4_config[] __initdata = {
-       { OMAP_TAG_LCD,         &h4_lcd_config },
-};
-
 static void __init omap_h4_init_early(void)
 {
        omap2_init_common_infrastructure();
@@ -331,9 +342,6 @@ static void __init omap_h4_init(void)
 {
        omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
 
-       omap_board_config = h4_config;
-       omap_board_config_size = ARRAY_SIZE(h4_config);
-
        /*
         * Make sure the serial ports are muxed on at this point.
         * You have to mux them off in device drivers later on
@@ -372,6 +380,8 @@ static void __init omap_h4_init(void)
        omap2_usbfs_init(&h4_usb_config);
        omap_serial_init();
        h4_init_flash();
+
+       omap_display_init(&h4_dss_data);
 }
 
 static void __init omap_h4_map_io(void)