rockchip: rk3288: remove fennec board support
authorKever Yang <kever.yang@rock-chips.com>
Tue, 20 Aug 2019 10:01:44 +0000 (18:01 +0800)
committerKever Yang <kever.yang@rock-chips.com>
Fri, 23 Aug 2019 07:27:40 +0000 (15:27 +0800)
Since there is no one using this board, remove it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
12 files changed:
arch/arm/dts/Makefile
arch/arm/dts/rk3288-fennec-u-boot.dtsi [deleted file]
arch/arm/dts/rk3288-fennec.dts [deleted file]
arch/arm/dts/rk3288-fennec.dtsi [deleted file]
arch/arm/mach-rockchip/rk3288/Kconfig
board/rockchip/fennec_rk3288/Kconfig [deleted file]
board/rockchip/fennec_rk3288/MAINTAINERS [deleted file]
board/rockchip/fennec_rk3288/Makefile [deleted file]
board/rockchip/fennec_rk3288/fennec-rk3288.c [deleted file]
configs/fennec-rk3288_defconfig [deleted file]
doc/README.rockchip
include/configs/fennec_rk3288.h [deleted file]

index 05ff624..aac1b83 100644 (file)
@@ -81,7 +81,6 @@ dtb-$(CONFIG_ROCKCHIP_RK322X) += \
 
 dtb-$(CONFIG_ROCKCHIP_RK3288) += \
        rk3288-evb.dtb \
-       rk3288-fennec.dtb \
        rk3288-firefly.dtb \
        rk3288-miqi.dtb \
        rk3288-phycore-rdk.dtb \
diff --git a/arch/arm/dts/rk3288-fennec-u-boot.dtsi b/arch/arm/dts/rk3288-fennec-u-boot.dtsi
deleted file mode 100644 (file)
index 2efb309..0000000
+++ /dev/null
@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2019 Rockchip Electronics Co., Ltd
- */
-
-#include "rk3288-u-boot.dtsi"
-
-&pinctrl {
-       u-boot,dm-pre-reloc;
-};
-
-&uart2 {
-       u-boot,dm-pre-reloc;
-};
-
-&sdmmc {
-       u-boot,dm-pre-reloc;
-};
-
-&emmc {
-       u-boot,dm-pre-reloc;
-};
-
-&gpio3 {
-       u-boot,dm-pre-reloc;
-};
-
-&gpio8 {
-       u-boot,dm-pre-reloc;
-};
-
-&pcfg_pull_none_drv_8ma {
-       u-boot,dm-spl;
-};
-
-&pcfg_pull_up_drv_8ma {
-       u-boot,dm-spl;
-};
-
-&sdmmc_bus4 {
-       u-boot,dm-spl;
-};
-
-&sdmmc_clk {
-       u-boot,dm-spl;
-};
-
-&sdmmc_cmd {
-       u-boot,dm-spl;
-};
-
-&sdmmc_pwr {
-       u-boot,dm-spl;
-};
diff --git a/arch/arm/dts/rk3288-fennec.dts b/arch/arm/dts/rk3288-fennec.dts
deleted file mode 100644 (file)
index e1d55e3..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * (C) Copyright 2016 Rockchip Electronics Co., Ltd
- */
-
-/dts-v1/;
-#include "rk3288-fennec.dtsi"
-
-/ {
-       model = "Rockchip RK3288 Fennec Board";
-       compatible = "rockchip,rk3288-fennec", "rockchip,rk3288";
-
-       chosen {
-               stdout-path = &uart2;
-       };
-};
-
-&dmc {
-       rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
-               0x6 0x0 0x8 0x4 0x17 0x24 0xd 0x6
-               0x4 0x8 0x4 0x76 0x4 0x0 0x30 0x0
-               0x1 0x2 0x2 0x4 0x0 0x0 0xc0 0x4
-               0x8 0x1f4>;
-       rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
-               0x0 0xc3 0x6 0x2>;
-       rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 0>;
-};
-
-&pwm1 {
-       status = "okay";
-};
diff --git a/arch/arm/dts/rk3288-fennec.dtsi b/arch/arm/dts/rk3288-fennec.dtsi
deleted file mode 100644 (file)
index f61252c..0000000
+++ /dev/null
@@ -1,421 +0,0 @@
-/*
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "rk3288.dtsi"
-
-/ {
-       memory {
-               reg = <0x0 0x80000000>;
-               device_type = "memory";
-       };
-
-       ext_gmac: external-gmac-clock {
-               compatible = "fixed-clock";
-               #clock-cells = <0>;
-               clock-frequency = <125000000>;
-               clock-output-names = "ext_gmac";
-       };
-
-       vcc_sys: vsys-regulator {
-               compatible = "regulator-fixed";
-               regulator-name = "vcc_sys";
-               regulator-min-microvolt = <5000000>;
-               regulator-max-microvolt = <5000000>;
-               regulator-always-on;
-               regulator-boot-on;
-       };
-};
-
-&cpu0 {
-       cpu0-supply = <&vdd_cpu>;
-};
-
-&emmc {
-       bus-width = <8>;
-       cap-mmc-highspeed;
-       disable-wp;
-       non-removable;
-       num-slots = <1>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
-       status = "okay";
-};
-
-&sdmmc {
-       bus-width = <4>;
-       cap-mmc-highspeed;
-       cap-sd-highspeed;
-       card-detect-delay = <200>;
-       disable-wp;
-       num-slots = <1>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
-       status = "okay";
-       vmmc-supply = <&vcc_sd>;
-       vqmmc-supply = <&vccio_sd>;
-};
-
-&gmac {
-       assigned-clocks = <&cru SCLK_MAC>;
-       assigned-clock-parents = <&ext_gmac>;
-       clock_in_out = "input";
-       pinctrl-names = "default";
-       pinctrl-0 = <&rgmii_pins>, <&phy_rst>, <&phy_pmeb>, <&phy_int>;
-       phy-supply = <&vcc_lan>;
-       phy-mode = "rgmii";
-       snps,reset-active-low;
-       snps,reset-delays-us = <0 10000 1000000>;
-       snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
-       tx_delay = <0x30>;
-       rx_delay = <0x10>;
-       status = "okay";
-};
-
-&gpu {
-       mali-supply = <&vdd_gpu>;
-       status = "okay";
-};
-
-&hdmi {
-       status = "okay";
-};
-
-&i2c0 {
-       status = "okay";
-       clock-frequency = <400000>;
-
-       rk808: pmic@1b {
-               compatible = "rockchip,rk808";
-               reg = <0x1b>;
-               interrupt-parent = <&gpio0>;
-               interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-               #clock-cells = <1>;
-               clock-output-names = "xin32k", "rk808-clkout2";
-               pinctrl-names = "default";
-               pinctrl-0 = <&pmic_int &global_pwroff>;
-               rockchip,system-power-controller;
-               wakeup-source;
-
-               vcc1-supply = <&vcc_sys>;
-               vcc2-supply = <&vcc_sys>;
-               vcc3-supply = <&vcc_sys>;
-               vcc4-supply = <&vcc_sys>;
-               vcc6-supply = <&vcc_sys>;
-               vcc7-supply = <&vcc_sys>;
-               vcc8-supply = <&vcc_io>;
-               vcc9-supply = <&vcc_io>;
-               vcc10-supply = <&vcc_io>;
-               vcc11-supply = <&vcc_io>;
-               vcc12-supply = <&vcc_io>;
-               vddio-supply = <&vcc_io>;
-
-               regulators {
-                       vdd_cpu: DCDC_REG1 {
-                               regulator-always-on;
-                               regulator-boot-on;
-                               regulator-min-microvolt = <750000>;
-                               regulator-max-microvolt = <1350000>;
-                               regulator-name = "vdd_arm";
-                               regulator-state-mem {
-                                       regulator-off-in-suspend;
-                               };
-                       };
-
-                       vdd_gpu: DCDC_REG2 {
-                               regulator-always-on;
-                               regulator-boot-on;
-                               regulator-min-microvolt = <850000>;
-                               regulator-max-microvolt = <1250000>;
-                               regulator-name = "vdd_gpu";
-                               regulator-state-mem {
-                                       regulator-on-in-suspend;
-                                       regulator-suspend-microvolt = <1000000>;
-                               };
-                       };
-
-                       vcc_ddr: DCDC_REG3 {
-                               regulator-always-on;
-                               regulator-boot-on;
-                               regulator-name = "vcc_ddr";
-                               regulator-state-mem {
-                                       regulator-on-in-suspend;
-                               };
-                       };
-
-                       vcc_io: DCDC_REG4 {
-                               regulator-always-on;
-                               regulator-boot-on;
-                               regulator-min-microvolt = <3300000>;
-                               regulator-max-microvolt = <3300000>;
-                               regulator-name = "vcc_io";
-                               regulator-state-mem {
-                                       regulator-on-in-suspend;
-                                       regulator-suspend-microvolt = <3300000>;
-                               };
-                       };
-
-                       vccio_pmu: LDO_REG1 {
-                               regulator-always-on;
-                               regulator-boot-on;
-                               regulator-min-microvolt = <3300000>;
-                               regulator-max-microvolt = <3300000>;
-                               regulator-name = "vccio_pmu";
-                               regulator-state-mem {
-                                       regulator-on-in-suspend;
-                                       regulator-suspend-microvolt = <3300000>;
-                               };
-                       };
-
-                       vcca_33: LDO_REG2 {
-                               regulator-always-on;
-                               regulator-boot-on;
-                               regulator-min-microvolt = <3300000>;
-                               regulator-max-microvolt = <3300000>;
-                               regulator-name = "vcca_33";
-                               regulator-state-mem {
-                                       regulator-off-in-suspend;
-                               };
-                       };
-
-                       vdd_10: LDO_REG3 {
-                               regulator-always-on;
-                               regulator-boot-on;
-                               regulator-min-microvolt = <1000000>;
-                               regulator-max-microvolt = <1000000>;
-                               regulator-name = "vdd_10";
-                               regulator-state-mem {
-                                       regulator-on-in-suspend;
-                                       regulator-suspend-microvolt = <1000000>;
-                               };
-                       };
-
-                       vcc_wl: LDO_REG4 {
-                               regulator-always-on;
-                               regulator-boot-on;
-                               regulator-min-microvolt = <1800000>;
-                               regulator-max-microvolt = <1800000>;
-                               regulator-name = "vcc_wl";
-                               regulator-state-mem {
-                                       regulator-on-in-suspend;
-                                       regulator-suspend-microvolt = <1800000>;
-                               };
-                       };
-
-                       vccio_sd: LDO_REG5 {
-                               regulator-always-on;
-                               regulator-boot-on;
-                               regulator-min-microvolt = <1800000>;
-                               regulator-max-microvolt = <3300000>;
-                               regulator-name = "vccio_sd";
-                               regulator-state-mem {
-                                       regulator-on-in-suspend;
-                                       regulator-suspend-microvolt = <3300000>;
-                               };
-                       };
-
-                       vdd10_lcd: LDO_REG6 {
-                               regulator-always-on;
-                               regulator-boot-on;
-                               regulator-min-microvolt = <1000000>;
-                               regulator-max-microvolt = <1000000>;
-                               regulator-name = "vdd10_lcd";
-                               regulator-state-mem {
-                                       regulator-on-in-suspend;
-                                       regulator-suspend-microvolt = <1000000>;
-                               };
-                       };
-
-                       vcc_18: LDO_REG7 {
-                               regulator-always-on;
-                               regulator-boot-on;
-                               regulator-min-microvolt = <1800000>;
-                               regulator-max-microvolt = <1800000>;
-                               regulator-name = "vcc_18";
-                               regulator-state-mem {
-                                       regulator-on-in-suspend;
-                                       regulator-suspend-microvolt = <1800000>;
-                               };
-                       };
-
-                       vcc18_lcd: LDO_REG8 {
-                               regulator-always-on;
-                               regulator-boot-on;
-                               regulator-min-microvolt = <1800000>;
-                               regulator-max-microvolt = <1800000>;
-                               regulator-name = "vcc18_lcd";
-                               regulator-state-mem {
-                                       regulator-on-in-suspend;
-                                       regulator-suspend-microvolt = <1800000>;
-                               };
-                       };
-
-                       vcc_sd: SWITCH_REG1 {
-                               regulator-always-on;
-                               regulator-boot-on;
-                               regulator-name = "vcc_sd";
-                               regulator-state-mem {
-                                       regulator-on-in-suspend;
-                               };
-                       };
-
-                       vcc_lan: SWITCH_REG2 {
-                               regulator-always-on;
-                               regulator-boot-on;
-                               regulator-name = "vcc_lan";
-                               regulator-state-mem {
-                                       regulator-on-in-suspend;
-                               };
-                       };
-               };
-       };
-};
-
-&pinctrl {
-       pcfg_output_high: pcfg-output-high {
-               output-high;
-       };
-
-       pcfg_output_low: pcfg-output-low {
-               output-low;
-       };
-
-       pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
-               drive-strength = <8>;
-       };
-
-       pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
-               bias-pull-up;
-               drive-strength = <8>;
-       };
-
-       gmac {
-               phy_int: phy-int {
-                       rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
-               };
-
-               phy_pmeb: phy-pmeb {
-                       rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_up>;
-               };
-
-               phy_rst: phy-rst {
-                       rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>;
-               };
-       };
-
-       pmic {
-               pmic_int: pmic-int {
-                       rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
-               };
-       };
-
-       sdmmc {
-               sdmmc_bus4: sdmmc-bus4 {
-                       rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
-                                       <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
-                                       <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
-                                       <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
-               };
-
-               sdmmc_clk: sdmmc-clk {
-                       rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
-               };
-
-               sdmmc_cmd: sdmmc-cmd {
-                       rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
-               };
-
-               sdmmc_pwr: sdmmc-pwr {
-                       rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>;
-               };
-       };
-
-       usbphy {
-               host_drv: host-drv {
-                       rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
-               };
-       };
-};
-
-&uart2 {
-       status = "okay";
-};
-
-&usbphy {
-       pinctrl-names = "default";
-       pinctrl-0 = <&host_drv>;
-       vbus_drv-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-       status = "okay";
-};
-
-&usb_host0_ehci {
-       status = "okay";
-};
-
-&usb_host1 {
-       status = "okay";
-};
-
-&usb_otg {
-       status = "okay";
-};
-
-&usb_hsic {
-       status = "okay";
-};
-
-&vopb {
-       status = "okay";
-};
-
-&vopb_mmu {
-       status = "okay";
-};
-
-&vopl {
-       status = "okay";
-};
-
-&vopl_mmu {
-       status = "okay";
-};
-
-&vpu {
-       status = "okay";
-};
index 87d0786..87e3d34 100644 (file)
@@ -191,8 +191,6 @@ source "board/radxa/rock2/Kconfig"
 
 source "board/rockchip/evb_rk3288/Kconfig"
 
-source "board/rockchip/fennec_rk3288/Kconfig"
-
 source "board/rockchip/tinker_rk3288/Kconfig"
 
 endif
diff --git a/board/rockchip/fennec_rk3288/Kconfig b/board/rockchip/fennec_rk3288/Kconfig
deleted file mode 100644 (file)
index 1dcfcf0..0000000
+++ /dev/null
@@ -1,15 +0,0 @@
-if TARGET_FENNEC_RK3288
-
-config SYS_BOARD
-       default "fennec_rk3288"
-
-config SYS_VENDOR
-       default "rockchip"
-
-config SYS_CONFIG_NAME
-       default "fennec_rk3288"
-
-config BOARD_SPECIFIC_OPTIONS # dummy
-       def_bool y
-
-endif
diff --git a/board/rockchip/fennec_rk3288/MAINTAINERS b/board/rockchip/fennec_rk3288/MAINTAINERS
deleted file mode 100644 (file)
index 78a389b..0000000
+++ /dev/null
@@ -1,6 +0,0 @@
-FENNEC-RK3288
-M:     Lin Huang <hl@rock-chips.com>
-S:     Maintained
-F:     board/rockchip/fennec_rk3288
-F:     include/configs/fennec_rk3288.h
-F:     configs/fennec-rk3288_defconfig
diff --git a/board/rockchip/fennec_rk3288/Makefile b/board/rockchip/fennec_rk3288/Makefile
deleted file mode 100644 (file)
index b287db6..0000000
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# (C) Copyright 2016 Rockchip Electronics Co., Ltd
-#
-# SPDX-License-Identifier:     GPL-2.0+
-#
-
-obj-y  += fennec-rk3288.o
diff --git a/board/rockchip/fennec_rk3288/fennec-rk3288.c b/board/rockchip/fennec_rk3288/fennec-rk3288.c
deleted file mode 100644 (file)
index 779bc64..0000000
+++ /dev/null
@@ -1,5 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2016 Rockchip Electronics Co., Ltd
- */
-
diff --git a/configs/fennec-rk3288_defconfig b/configs/fennec-rk3288_defconfig
deleted file mode 100644 (file)
index c6d1ddb..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_ROCKCHIP=y
-CONFIG_SYS_TEXT_BASE=0x00000000
-CONFIG_ROCKCHIP_RK3288=y
-CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
-CONFIG_TARGET_FENNEC_RK3288=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_SPL_STACK_R_ADDR=0x80000
-CONFIG_DEBUG_UART_BASE=0xff690000
-CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_DEBUG_UART=y
-# CONFIG_ANDROID_BOOT_IMAGE is not set
-CONFIG_USE_PREBOOT=y
-CONFIG_SILENT_CONSOLE=y
-CONFIG_CONSOLE_MUX=y
-CONFIG_DEFAULT_FDT_FILE="rk3288-fennec.dtb"
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_TEXT_BASE=0xff704000
-CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_PMIC=y
-CONFIG_CMD_REGULATOR=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_SPL_PARTITION_UUIDS=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="rk3288-fennec"
-CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_REGMAP=y
-CONFIG_SPL_REGMAP=y
-CONFIG_SYSCON=y
-CONFIG_SPL_SYSCON=y
-# CONFIG_SPL_SIMPLE_BUS is not set
-CONFIG_CLK=y
-CONFIG_SPL_CLK=y
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_FLASH_MMC_DEV=0
-CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
-CONFIG_ROCKCHIP_GPIO=y
-CONFIG_SYS_I2C_ROCKCHIP=y
-CONFIG_MMC_DW=y
-CONFIG_MMC_DW_ROCKCHIP=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_SPEED=20000000
-CONFIG_DM_ETH=y
-CONFIG_ETH_DESIGNWARE=y
-CONFIG_GMAC_ROCKCHIP=y
-CONFIG_PINCTRL=y
-CONFIG_SPL_PINCTRL=y
-CONFIG_DM_PMIC=y
-CONFIG_PMIC_RK8XX=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_REGULATOR_RK8XX=y
-CONFIG_PWM_ROCKCHIP=y
-CONFIG_RAM=y
-CONFIG_SPL_RAM=y
-CONFIG_DEBUG_UART_SHIFT=2
-CONFIG_SYSRESET=y
-CONFIG_USB=y
-CONFIG_USB_DWC2=y
-CONFIG_ROCKCHIP_USB2_PHY=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
-CONFIG_USB_GADGET_VENDOR_NUM=0x2207
-CONFIG_USB_GADGET_PRODUCT_NUM=0x320a
-CONFIG_USB_GADGET_DWC2_OTG=y
-CONFIG_USB_HOST_ETHER=y
-CONFIG_USB_ETHER_ASIX=y
-CONFIG_USB_ETHER_SMSC95XX=y
-CONFIG_CMD_DHRYSTONE=y
-CONFIG_ERRNO_STR=y
index 7d4dc1b..ab3361a 100644 (file)
@@ -28,10 +28,9 @@ You will need:
 Building
 ========
 
-At present 12 RK3288 boards are supported:
+At present 11 RK3288 boards are supported:
 
    - EVB RK3288 - use evb-rk3288 configuration
-   - Fennec RK3288 - use fennec-rk3288 configuration
    - Firefly RK3288 - use firefly-rk3288 configuration
    - Hisense Chromebook - use chromebook_jerry configuration
    - Asus C100P Chromebook - use chromebook_minnie configuration
diff --git a/include/configs/fennec_rk3288.h b/include/configs/fennec_rk3288.h
deleted file mode 100644 (file)
index ddd7012..0000000
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2016 Rockchip Electronics Co., Ltd
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define ROCKCHIP_DEVICE_SETTINGS
-#include <configs/rk3288_common.h>
-
-#define CONFIG_SYS_MMC_ENV_DEV 0
-
-#endif