Autoconf has been deprecating configure.in for quite a long time.
Rename all our configure.in and preconfigure.in files to .ac.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+2013-10-30 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.in: Moved to ...
+ * configure.ac: ... here. Change reference to configure.in
+ to configure.ac.
+ * sysdeps/arm/preconfigure.ac: ... here.
+ configure.in to configure.ac.
+ * sysdeps/gnu/configure.in: Moved to ...
+ * sysdeps/gnu/configure.ac: ... here.
+ * sysdeps/i386/configure.in: Moved to ...
+ * sysdeps/i386/configure.ac: ... here.
+ * sysdeps/ieee754/ldbl-opt/configure.in: Moved to ...
+ * sysdeps/ieee754/ldbl-opt/configure.ac: ... here.
+ * sysdeps/mach/configure.in: Moved to ...
+ * sysdeps/mach/configure.ac: ... here.
+ * sysdeps/mach/hurd/configure.in: Moved to ...
+ * sysdeps/mach/hurd/configure.ac: ... here.
+ * sysdeps/powerpc/configure.in: Moved to ...
+ * sysdeps/powerpc/configure.ac: ... here.
+ * sysdeps/powerpc/powerpc32/configure.in: Moved to ...
+ * sysdeps/powerpc/powerpc32/configure.ac: ... here.
+ * sysdeps/powerpc/powerpc64/configure.in: Moved to ...
+ * sysdeps/powerpc/powerpc64/configure.ac: ... here.
+ * sysdeps/s390/s390-32/configure.in: Moved to ...
+ * sysdeps/s390/s390-32/configure.ac: ... here.
+ * sysdeps/s390/s390-64/configure.in: Moved to ...
+ * sysdeps/s390/s390-64/configure.ac: ... here.
+ * sysdeps/sh/configure.in: Moved to ...
+ * sysdeps/sh/configure.ac: ... here.
+ * sysdeps/sparc/configure.in: Moved to ...
+ * sysdeps/sparc/configure.ac: ... here.
+ * sysdeps/unix/sysv/linux/configure.in: Moved to ...
+ * sysdeps/unix/sysv/linux/configure.ac: ... here.
+ * sysdeps/unix/sysv/linux/powerpc/configure.in: Moved to ...
+ * sysdeps/unix/sysv/linux/powerpc/configure.ac: ... here.
+ * sysdeps/x86_64/configure.in: Moved to ...
+ * sysdeps/x86_64/configure.ac: ... here.
+ * sysdeps/x86_64/preconfigure.in: Moved to ...
+ * sysdeps/x86_64/preconfigure.ac: ... here.
+ * aclocal.m4: Change reference to configure.in to configure.ac.
+ * config.h.in: Likewise.
+ * manual/install.texi: Likewise.
+ * manual/maint.texi: Likewise.
+ * Makefile: Likewise.
+ * malloc/Makefile: Likewise.
+ * nscd/Makefile: Likewise.
+ * Makeconfig: Change reference to configure.in and
+ preconfigure.in to configure.ac and preconfigure.ac
+ respectively.
+ * INSTALL: Regenerated.
+ * configure: Likewise.
+ * sysdeps/gnu/configure: Likewise.
+ * sysdeps/i386/configure: Likewise.
+ * sysdeps/ieee754/ldbl-opt/configure: Likewise.
+ * sysdeps/mach/configure: Likewise.
+ * sysdeps/mach/hurd/configure: Likewise.
+ * sysdeps/powerpc/configure: Likewise.
+ * sysdeps/powerpc/powerpc32/configure: Likewise.
+ * sysdeps/powerpc/powerpc64/configure: Likewise.
+ * sysdeps/s390/s390-32/configure: Likewise.
+ * sysdeps/s390/s390-64/configure: Likewise.
+ * sysdeps/sh/configure: Likewise.
+ * sysdeps/sparc/configure: Likewise.
+ * sysdeps/unix/sysv/linux/configure: Likewise.
+ * sysdeps/unix/sysv/linux/powerpc/configure: Likewise.
+ * sysdeps/x86_64/configure: Likewise.
+ * sysdeps/x86_64/preconfigure: Likewise.
+
2013-10-29 Andreas Schwab <schwab@suse.de>
* stdio-common/Makefile (tst-swscanf-ENV): Define.
should definitely upgrade `sed'.
-If you change any of the `configure.in' files you will also need
+If you change any of the `configure.ac' files you will also need
* GNU `autoconf' 2.53 or higher
$(wildcard $(dir)/Implies) \
$(patsubst %.in,%,\
$(firstword $(wildcard \
- $(addprefix $(dir)/,configure configure.in))))) \
+ $(addprefix $(dir)/,configure configure.ac))))) \
$(patsubst %.in,%,\
- $(wildcard $(..)sysdeps/*/preconfigure $(..)sysdeps/*/preconfigure.in)) \
+ $(wildcard $(..)sysdeps/*/preconfigure $(..)sysdeps/*/preconfigure.ac)) \
$(patsubst %.in,%,\
$(foreach add-on,$(add-ons),\
$(firstword $(wildcard \
$(addprefix $(firstword $(filter /%,$(add-on)) $(..)$(add-on))/,\
- configure configure.in))) \
+ configure configure.ac))) \
$(wildcard $(addprefix $(firstword $(filter /%,$(add-on)) $(..)$(add-on))/,\
- sysdeps/*/preconfigure sysdeps/*/preconfigure.in))))
+ sysdeps/*/preconfigure sysdeps/*/preconfigure.ac))))
@cd $(@D); if test -f $(@F); then exec $(SHELL) $(@F) --recheck; else \
echo The GNU C library has not been configured. >&2; \
echo Run \`configure\' to configure it before building. >&2; \
mv -f $@.new $@
endef
-configure: configure.in aclocal.m4; $(autoconf-it)
-%/configure: %/configure.in aclocal.m4; $(autoconf-it)
-%/preconfigure: %/preconfigure.in aclocal.m4; $(autoconf-it)
+configure: configure.ac aclocal.m4; $(autoconf-it)
+%/configure: %/configure.ac aclocal.m4; $(autoconf-it)
+%/preconfigure: %/preconfigure.ac aclocal.m4; $(autoconf-it)
endif # $(AUTOCONF) = no
), [63])])dnl
dnl
dnl We define the macro GLIBC_PROVIDES to do an AC_PROVIDE for each macro
-dnl which appears in configure.in before the sysdep configure scripts are run.
-dnl Each sysdep configure.in does GLIBC_PROVIDES first, to avoid any
+dnl which appears in configure.ac before the sysdep configure scripts are run.
+dnl Each sysdep configure.ac does GLIBC_PROVIDES first, to avoid any
dnl AC_REQUIREs or AC_BEFOREs duplicating their code.
dnl
define([GLIBC_PROVIDES], [dnl
m4_wrap([m4_divert_pop([BODY])[]])
m4_divert_push([BODY])[]dnl
dnl End of ripped out of AS_INIT.
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
define([_AC_LANG], [C])dnl
])dnl
dnl
They are used only in miscellaneous generator programs, not
in compiling libc itself. */
-/* sysdeps/generic/configure.in */
+/* sysdeps/generic/configure.ac */
#undef HAVE_PSIGNAL
-/* sysdeps/unix/configure.in */
+/* sysdeps/unix/configure.ac */
#undef HAVE_STRERROR
-/* sysdeps/unix/common/configure.in */
+/* sysdeps/unix/common/configure.ac */
#undef HAVE_SYS_SIGLIST
#undef HAVE__SYS_SIGLIST
#undef HAVE__CTYPE_
if ${libc_cv_autoconf_works+:} false; then :
$as_echo_n "(cached) " >&6
else
- if (cd $srcdir; $AUTOCONF $ACFLAGS configure.in > /dev/null 2>&1); then
+ if (cd $srcdir; $AUTOCONF $ACFLAGS configure.ac > /dev/null 2>&1); then
libc_cv_autoconf_works=yes
else
libc_cv_autoconf_works=no
*)
AC_CACHE_CHECK(dnl
whether $AUTOCONF${ACFLAGS:+ }$ACFLAGS works, libc_cv_autoconf_works, [dnl
- if (cd $srcdir; $AUTOCONF $ACFLAGS configure.in > /dev/null 2>&1); then
+ if (cd $srcdir; $AUTOCONF $ACFLAGS configure.ac > /dev/null 2>&1); then
libc_cv_autoconf_works=yes
else
libc_cv_autoconf_works=no
AC_SUBST(DEFINES)
-dnl See sysdeps/mach/configure.in for this variable.
+dnl See sysdeps/mach/configure.ac for this variable.
AC_SUBST(mach_interface_list)
VERSION=`sed -n -e 's/^#define VERSION "\([^"]*\)"/\1/p' < $srcdir/version.h`
+2013-10-30 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.in: Moved to ...
+ * configure.ac: ... here.
+ * configure: Regenerated.
+
2013-08-29 OndÅ™ej BÃlka <neleai@seznam.cz>
* stringprep.c: Fix typos.
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
libc_add_on_canonical=
generated += memusagestat memusage
extra-objs += memusagestat.o
-# The configure.in check for libgd and its headers did not use $SYSINCLUDES.
+# The configure.ac check for libgd and its headers did not use $SYSINCLUDES.
# The directory specified by --with-headers usually contains only the basic
# kernel interface headers, not something like libgd. So the simplest thing
# is to presume that the standard system headers will be ok for this file.
@end itemize
@noindent
-If you change any of the @file{configure.in} files you will also need
+If you change any of the @file{configure.ac} files you will also need
@itemize @bullet
@item
The top-level @file{configure} script uses the shell @code{.} command to
read the @file{configure} file in each system-dependent directory
chosen, in order. The @file{configure} files are often generated from
-@file{configure.in} files using Autoconf.
+@file{configure.ac} files using Autoconf.
A system-dependent @file{configure} script will usually add things to
the shell variables @samp{DEFS} and @samp{config_vars}; see the
just @w{@samp{--with-@var{package}}} (no argument), then it sets
@w{@samp{with_@var{package}}} to @samp{yes}.
-@item configure.in
+@item configure.ac
This file is an Autoconf input fragment to be processed into the file
@file{configure} in this subdirectory. @xref{Introduction,,,
autoconf.info, Autoconf: Generating Automatic Configuration Scripts},
for a description of Autoconf. You should write either @file{configure}
-or @file{configure.in}, but not both. The first line of
-@file{configure.in} should invoke the @code{m4} macro
+or @file{configure.ac}, but not both. The first line of
+@file{configure.ac} should invoke the @code{m4} macro
@samp{GLIBC_PROVIDES}. This macro does several @code{AC_PROVIDE} calls
for Autoconf macros which are used by the top-level @file{configure}
script; without this, those macros might be invoked again unnecessarily
+2013-10-30 Mike Frysinger <vapier@gentoo.org>
+
+ * sysdeps/pthread/configure.in: Moved to ...
+ * sysdeps/pthread/configure.ac: ... here.
+ * sysdeps/x86_64/configure.in: Moved to ...
+ * sysdeps/x86_64/configure.ac: ... here.
+ * sysdeps/pthread/configure: Regenerated.
+ * sysdeps/x86_64/configure: Likewise.
+
2013-10-04 Maciej W. Rozycki <macro@codesourcery.com>
* tst-mutex8.c (check_type) [ENABLE_PI]: Handle ENOTSUP failure
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
if test "x$libc_cv_gcc___thread" != xyes; then
as_fn_error $? "compiler support for __thread is required" "$LINENO" 5
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/i386.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for .cfi_personality and .cfi_lsda pseudo-ops" >&5
nscd-modules += selinux
selinux-LIBS := -lselinux $(libaudit) $(libcap)
-# The configure.in check for libselinux and its headers did not use
+# The configure.ac check for libselinux and its headers did not use
# $SYSINCLUDES. The directory specified by --with-headers usually
# contains only the basic kernel interface headers, not something like
# libselinux. So the simplest thing is to presume that the standard
+2013-10-30 Mike Frysinger <vapier@gentoo.org>
+
+ * README: Change references to preconfigure.in to
+ preconfigure.ac.
+
2013-01-02 Joseph Myers <joseph@codesourcery.com>
* README: Update copyright dates in example.
+2013-10-30 Mike Frysinger <vapier@gentoo.org>
+
+ * sysdeps/unix/sysv/linux/aarch64/configure.in: Moved to ...
+ * sysdeps/unix/sysv/linux/aarch64/configure.ac: ... here.
+ * sysdeps/unix/sysv/linux/aarch64/configure: Regenerated.
+
2013-09-30 Andrew Pinski <andrew.pinski@caviumnetworks.com>
* sysdeps/unix/sysv/linux/aarch64/sysdep.h (SYSCALL_ERROR_HANDLER):
+2013-10-30 Mike Frysinger <vapier@gentoo.org>
+
+ * sysdeps/alpha/configure.in: Moved to ...
+ * sysdeps/alpha/configure.ac: ... here.
+ * sysdeps/unix/sysv/linux/alpha/configure.in: Moved to ...
+ * sysdeps/unix/sysv/linux/alpha/configure.ac: ... here.
+ * sysdeps/alpha/configure: Regenerated.
+ * sysdeps/unix/sysv/linux/alpha/configure: Likewise.
+
2013-10-12 Yuri Chornoivan <yurchor@ukr.net>
* sysdeps/unix/sysv/linux/alpha/nptl/pt-vfork.S: Fix typos.
+2013-10-30 Mike Frysinger <vapier@gentoo.org>
+
+ * sysdeps/unix/sysv/linux/am33/configure.in: Moved to ...
+ * sysdeps/unix/sysv/linux/am33/configure.ac: ... here.
+ * sysdeps/unix/sysv/linux/am33/configure: Regenerated.
+
2013-08-29 OndÅ™ej BÃlka <neleai@seznam.cz>
* sysdeps/unix/sysv/linux/am33/bits/fcntl.h: Fix typos.
+2013-10-30 Mike Frysinger <vapier@gentoo.org>
+
+ * sysdeps/arm/configure.in: Moved to ...
+ * sysdeps/arm/configure.ac: ... here.
+ * sysdeps/arm/preconfigure.in: Moved to ...
+ * sysdeps/arm/preconfigure.ac: ... here. Change reference to
+ configure.in to configure.ac.
+ * sysdeps/arm/preconfigure: Regenerated.
+ * sysdeps/arm/armv7/configure.in: Moved to ...
+ * sysdeps/arm/armv7/configure.ac: ... here.
+ * sysdeps/unix/sysv/linux/arm/configure.in: Moved to ...
+ * sysdeps/unix/sysv/linux/arm/configure.ac: ... here. Change
+ reference to preconfigure.in to preconfigure.ac.
+ * sysdeps/unix/sysv/linux/arm/configure: Regenerated.
+ * sysdeps/unix/sysv/linux/arm/nptl/configure.in: Moved to ...
+ * sysdeps/unix/sysv/linux/arm/nptl/configure.ac: ... here.
+ * sysdeps/arm/configure: Regenerated.
+ * sysdeps/sysdeps/arm/armv7/configure: Likewise.
+ * sysdeps/unix/sysv/linux/arm/nptl/configure: Likewise.
+
2013-10-04 Will Newton <will.newton@linaro.org>
* sysdeps/arm/__longjmp.S (NO_THUMB): Remove define.
+2013-10-30 Mike Frysinger <vapier@gentoo.org>
+
+ * sysdeps/hppa/configure.in: Moved to ...
+ * sysdeps/hppa/configure.ac: ... here.
+ * sysdeps/hppa/configure: Regenerated.
+
2013-09-11 Andreas Schwab <schwab@suse.de>
* sysdeps/unix/sysv/linux/hppa/bits/fcntl.h (__O_TMPFILE): Define.
+2013-10-30 Mike Frysinger <vapier@gentoo.org>
+
+ * sysdeps/ia64/configure.in: Moved to ...
+ * sysdeps/ia64/configure.ac: ... here.
+ * sysdeps/unix/sysv/linux/ia64/configure.in: Moved to ...
+ * sysdeps/unix/sysv/linux/ia64/configure.ac: ... here.
+ * sysdeps/ia64/configure: Regenerated.
+ * sysdeps/unix/sysv/linux/ia64/configure: Likewise.
+
2013-10-04 Alan Modra <amodra@gmail.com>
* sysdeps/ia64/fpu/printf_fphex.c: Adjust for fpnum change.
+2013-10-30 Mike Frysinger <vapier@gentoo.org>
+
+ * sysdeps/unix/sysv/linux/m68k/configure.in: Moved to ...
+ * sysdeps/unix/sysv/linux/m68k/configure.ac: ... here.
+ * sysdeps/unix/sysv/linux/m68k/configure: Regenerated.
+
2013-10-08 Andreas Schwab <schwab@suse.de>
* sysdeps/m68k/start.S [SHARED]: Use PIC.
+2013-10-30 Mike Frysinger <vapier@gentoo.org>
+
+ * sysdeps/unix/sysv/linux/microblaze/configure.in: Moved to ...
+ * sysdeps/unix/sysv/linux/microblaze/configure.ac: ... here.
+ * sysdeps/unix/sysv/linux/microblaze/configure: Regenerated.
+
2013-06-15 Siddhesh Poyarekar <siddhesh@redhat.com>
* sysdeps/unix/sysv/linux/microblaze/nptl/libpthread.abilist:
+2013-10-30 Mike Frysinger <vapier@gentoo.org>
+
+ * sysdeps/mips/configure.in: Moved to ...
+ * sysdeps/mips/configure.ac: ... here.
+ * sysdeps/unix/sysv/linux/mips/configure.in: Moved to ...
+ * sysdeps/unix/sysv/linux/mips/configure.ac: ... here.
+ * sysdeps/unix/sysv/linux/mips/mips64/configure.in: Moved to ...
+ * sysdeps/unix/sysv/linux/mips/mips64/configure.ac: ... here.
+ * sysdeps/mips/configure: Regenerated.
+ * sysdeps/unix/sysv/linux/mips/configure: Likewise.
+ * sysdeps/unix/sysv/linux/mips/mips64/configure: Likewise.
+
2013-09-26 Steve Ellcey <sellcey@mips.com>
[BZ #15632]
+2013-10-30 Mike Frysinger <vapier@gentoo.org>
+
+ * sysdeps/unix/sysv/linux/tile/configure.in: Moved to ...
+ * sysdeps/unix/sysv/linux/tile/configure.ac: ... here.
+ * sysdeps/unix/sysv/linux/tile/tilegx/configure.in: Moved to ...
+ * sysdeps/unix/sysv/linux/tile/tilegx/configure.ac: ... here.
+ * sysdeps/unix/sysv/linux/tile/configure: Regenerated.
+ * sysdeps/unix/sysv/linux/tile/tilegx/configure: Likewise.
+
2013-09-22 Carlos O'Donell <carlos@redhat.com>
[BZ #15754]
The real source code for any ports is found in the sysdeps/ subdirectories.
These should be exactly what would go into the main libc source tree if you
were to incorporate it directly. The only exceptions are the files
-sysdeps/*/preconfigure and sysdeps/*/preconfigure.in; these are fragments
+sysdeps/*/preconfigure and sysdeps/*/preconfigure.ac; these are fragments
used by this add-on's configure fragment. The purpose of these is to set
$base_machine et al when the main libc configure's defaults are not right
for some machine. Everything else can and should be done from a normal
selects that sysdeps subdirectory. Each port that requires some special
treatment before the sysdeps directory list is calculated, should add a
sysdeps/CPU/preconfigure file; this can either be written by hand or
-generated by Autoconf from sysdeps/CPU/preconfigure.in, and follow the
+generated by Autoconf from sysdeps/CPU/preconfigure.ac, and follow the
rules for glibc add-on configure fragments. No preconfigure file should do
anything on an unrelated configuration, so that disparate ports can be put
into a single add-on without interfering with each other.
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/alpha.
# With required gcc+binutils, we can always access static and hidden
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/arm/armv7.
# We need binutils 2.21 to ensure that NEON alignments are assembled correctly.
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/arm.
#AC_DEFINE(PI_STATIC_AND_HIDDEN)
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local preconfigure fragment for sysdeps/arm
case "$machine" in
# If the compiler enables unwind tables by default, this causes
# problems with undefined symbols in -nostdlib link tests. To
# avoid this, add -fno-unwind-tables here and remove it in
- # sysdeps/unix/sysv/linux/arm/configure.in after those tests have
+ # sysdeps/unix/sysv/linux/arm/configure.ac after those tests have
# been run.
if test "${CFLAGS+set}" != "set"; then
CFLAGS="-g -O2"
# If the compiler enables unwind tables by default, this causes
# problems with undefined symbols in -nostdlib link tests. To
# avoid this, add -fno-unwind-tables here and remove it in
- # sysdeps/unix/sysv/linux/arm/configure.in after those tests have
+ # sysdeps/unix/sysv/linux/arm/configure.ac after those tests have
# been run.
if test "${CFLAGS+set}" != "set"; then
CFLAGS="-g -O2"
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for assembler line separator" >&5
$as_echo_n "checking for assembler line separator... " >&6; }
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/ia64.
$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/mips.
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/unix/sysv/linux/aarch64.
arch_minimum_kernel=3.7.0
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/unix/sysv/linux/alpha
# We did historically export the unwinder from glibc.
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for am33/sysdeps/unix/sysv/linux/am33
arch_minimum_kernel=2.6.25
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/unix/sysv/linux/arm.
libc_cv_gcc_unwind_find_fde=no
-# Remove -fno-unwind-tables that was added in sysdeps/arm/preconfigure.in.
+# Remove -fno-unwind-tables that was added in sysdeps/arm/preconfigure.ac.
CFLAGS=${CFLAGS% -fno-unwind-tables}
# Local configure fragment for sysdeps/unix/sysv/linux/arm.
libc_cv_gcc_unwind_find_fde=no
-# Remove -fno-unwind-tables that was added in sysdeps/arm/preconfigure.in.
+# Remove -fno-unwind-tables that was added in sysdeps/arm/preconfigure.ac.
CFLAGS=${CFLAGS% -fno-unwind-tables}
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
libc_cv_gcc_exceptions=yes
exceptions=-fexceptions
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/unix/sysv/linux/ia64
ldd_rewrite_script=$dir/ldd-rewrite.sed
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
case $machine in
m68k/coldfire)
;;
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/unix/sysv/linux/microblaze.
arch_minimum_kernel=2.6.30
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/unix/sysv/linux/mips.
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/unix/sysv/linux/mips/mips64.
ldd_rewrite_script=$dir/ldd-rewrite.sed
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/unix/sysv/linux/tile.
arch_minimum_kernel=2.6.32
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/unix/sysv/linux/tile/tilegx
ldd_rewrite_script=$dir/ldd-rewrite.sed
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/gnu.
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_header_compile
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/i386.
# We no longer support i386 since it lacks the atomic instructions
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/ieee754/ldbl-opt/.
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_header_preproc
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}mig", so it can be a program name with args.
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
$as_echo "#define NO_HIDDEN 1" >>confdefs.h
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/powerpc.
# Accept binutils which knows about ".machine".
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/powerpc/powerpc32.
# See whether gas has R_PPC_REL16 relocs.
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/powerpc/powerpc64.
# The Aix ld uses global .symbol_names instead of symbol_names
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/s390.
$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/s390.
$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/sh.
$as_echo "#define PI_STATIC_AND_HIDDEN 1" >>confdefs.h
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/sparc.
# Check for support of VIS3 et al. instructions in the assembler.
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/unix/sysv/linux.
# Don't bother trying to generate any glue code to be compatible with the
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/unix/sysv/linux/powerpc/.
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_header_compile
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local configure fragment for sysdeps/x86_64.
-# This file is generated from configure.in by Autoconf. DO NOT EDIT!
+# This file is generated from configure.ac by Autoconf. DO NOT EDIT!
# Local preconfigure fragment for sysdeps/x86_64
test -n "$base_machine" || case "$machine" in