#define __ASM_AVR32_ARCH_CLK_H__
#include <asm/arch/chip-features.h>
+#include <asm/arch/portmux.h>
#ifdef CONFIG_PLL
- #define PLL0_RATE ((CFG_OSC0_HZ / CFG_PLL0_DIV) * CFG_PLL0_MUL)
-#define MAIN_CLK_RATE ((CONFIG_SYS_OSC0_HZ / CONFIG_SYS_PLL0_DIV) * CONFIG_SYS_PLL0_MUL)
++#define PLL0_RATE ((CONFIG_SYS_OSC0_HZ / CONFIG_SYS_PLL0_DIV) \
++ * CONFIG_SYS_PLL0_MUL)
+#define MAIN_CLK_RATE PLL0_RATE
#else
- #define MAIN_CLK_RATE (CFG_OSC0_HZ)
-#define MAIN_CLK_RATE (CONFIG_SYS_OSC0_HZ)
++#define MAIN_CLK_RATE (CONFIG_SYS_OSC0_HZ)
#endif
static inline unsigned long get_cpu_clk_rate(void)
#endif
extern void clk_init(void);
-extern void gclk_init(void) __attribute__((weak));
/* Board code may need the SDRAM base clock as a compile-time constant */
- #define SDRAMC_BUS_HZ (MAIN_CLK_RATE >> CFG_CLKDIV_HSB)
+ #define SDRAMC_BUS_HZ (MAIN_CLK_RATE >> CONFIG_SYS_CLKDIV_HSB)
- parent_rate = CFG_OSC0_HZ;
+/* Generic clock control */
+enum gclk_parent {
+ GCLK_PARENT_OSC0 = 0,
+ GCLK_PARENT_OSC1 = 1,
+ GCLK_PARENT_PLL0 = 2,
+ GCLK_PARENT_PLL1 = 3,
+};
+
+/* Some generic clocks have specific roles */
+#define GCLK_DAC_SAMPLE_CLK 6
+#define GCLK_LCDC_PIXCLK 7
+
+extern unsigned long __gclk_set_rate(unsigned int id, enum gclk_parent parent,
+ unsigned long rate, unsigned long parent_rate);
+
+/**
+ * gclk_set_rate - configure and enable a generic clock
+ * @id: Which GCLK[id] to enable
+ * @parent: Parent clock feeding the GCLK
+ * @rate: Target rate of the GCLK in Hz
+ *
+ * Returns the actual GCLK rate in Hz, after rounding to the nearest
+ * supported rate.
+ *
+ * All three parameters are usually constant, hence the inline.
+ */
+static inline unsigned long gclk_set_rate(unsigned int id,
+ enum gclk_parent parent, unsigned long rate)
+{
+ unsigned long parent_rate;
+
+ if (id > 7)
+ return 0;
+
+ switch (parent) {
+ case GCLK_PARENT_OSC0:
- #ifdef CFG_OSC1_HZ
++ parent_rate = CONFIG_SYS_OSC0_HZ;
+ break;
- parent_rate = CFG_OSC1_HZ;
++#ifdef CONFIG_SYS_OSC1_HZ
+ case GCLK_PARENT_OSC1:
++ parent_rate = CONFIG_SYS_OSC1_HZ;
+ break;
+#endif
+#ifdef PLL0_RATE
+ case GCLK_PARENT_PLL0:
+ parent_rate = PLL0_RATE;
+ break;
+#endif
+#ifdef PLL1_RATE
+ case GCLK_PARENT_PLL1:
+ parent_rate = PLL1_RATE;
+ break;
+#endif
+ default:
+ parent_rate = 0;
+ break;
+ }
+
+ return __gclk_set_rate(id, parent, rate, parent_rate);
+}
+
+/**
+ * gclk_enable_output - enable output on a GCLK pin
+ * @id: Which GCLK[id] pin to enable
+ * @drive_strength: Drive strength of external GCLK pin, if applicable
+ */
+static inline void gclk_enable_output(unsigned int id,
+ unsigned long drive_strength)
+{
+ switch (id) {
+ case 0:
+ portmux_select_peripheral(PORTMUX_PORT_A, 1 << 30,
+ PORTMUX_FUNC_A, drive_strength);
+ break;
+ case 1:
+ portmux_select_peripheral(PORTMUX_PORT_A, 1 << 31,
+ PORTMUX_FUNC_A, drive_strength);
+ break;
+ case 2:
+ portmux_select_peripheral(PORTMUX_PORT_B, 1 << 19,
+ PORTMUX_FUNC_A, drive_strength);
+ break;
+ case 3:
+ portmux_select_peripheral(PORTMUX_PORT_B, 1 << 29,
+ PORTMUX_FUNC_A, drive_strength);
+ break;
+ case 4:
+ portmux_select_peripheral(PORTMUX_PORT_B, 1 << 30,
+ PORTMUX_FUNC_A, drive_strength);
+ break;
+ }
+}
+
#endif /* __ASM_AVR32_ARCH_CLK_H__ */
projects / platform / kernel / u-boot.git / commitdiff