ARM: dts: colibri-imx6ull: add -hog to gpio hogs

Since it seems to be a naming-convention to add -hog for gpio hogs do
this.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
index fac7428..f6b3111 100644 (file)
--- a/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris-v2.dts
@@ -29,7 +29,7 @@
 
 &gpio1 {
        /* This turns the LVDS transceiver on */
-       lvds-power-on {
+       lvds-power-on-hog {
                gpio-hog;
                gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
                line-name = "LVDS_POWER_ON";
@@ -42,7 +42,7 @@
         * This switches the LVDS transceiver to the single-channel
         * output mode.
         */
-       lvds-ch-mode {
+       lvds-ch-mode-hog {
                gpio-hog;
                gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
                line-name = "LVDS_CH_MODE";
@@ -52,7 +52,7 @@
        /*
         * This switches the LVDS transceiver to the 24-bit RGB mode.
         */
-       lvds-rgb-mode {
+       lvds-rgb-mode-hog {
                gpio-hog;
                gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
                line-name = "LVDS_RGB_MODE";
@@ -64,7 +64,7 @@
        /*
         * This switches the LVDS transceiver to VESA color mapping mode.
         */
-       lvds-color-map {
+       lvds-color-map-hog {
                gpio-hog;
                gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
                line-name = "LVDS_COLOR_MAP";

diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
index 7f3b37b..166a0ae 100644 (file)
--- a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
@@ -59,7 +59,7 @@
         * in userspace.
         * The same applies to uart1_tx_on.
         */
-       uart25_tx_on {
+       uart25_tx_on-hog {
                gpio-hog;
                gpios = <15 0>;
                output-high;
@@ -67,7 +67,7 @@
 };
 
 &gpio2 {
-       uart1_tx_on {
+       uart1_tx_on-hog {
                gpio-hog;
                gpios = <7 0>;
                output-high;

diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
index ed89d07..488da6d 100644 (file)
--- a/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
+++ b/arch/arm/boot/dts/imx6ull-colibri-wifi-iris-v2.dts
@@ -29,7 +29,7 @@
 
 &gpio1 {
        /* This turns the LVDS transceiver on */
-       lvds-power-on {
+       lvds-power-on-hog {
                gpio-hog;
                gpios = <14 GPIO_ACTIVE_HIGH>; /* SODIMM 99 */
                line-name = "LVDS_POWER_ON";
@@ -42,7 +42,7 @@
         * This switches the LVDS transceiver to the single-channel
         * output mode.
         */
-       lvds-ch-mode {
+       lvds-ch-mode-hog {
                gpio-hog;
                gpios = <0 GPIO_ACTIVE_HIGH>; /* SODIMM 55 */
                line-name = "LVDS_CH_MODE";
@@ -52,7 +52,7 @@
        /*
         * This switches the LVDS transceiver to the 24-bit RGB mode.
         */
-       lvds-rgb-mode {
+       lvds-rgb-mode-hog {
                gpio-hog;
                gpios = <1 GPIO_ACTIVE_HIGH>; /* SODIMM 63 */
                line-name = "LVDS_RGB_MODE";
@@ -64,7 +64,7 @@
        /*
         * This switches the LVDS transceiver to VESA color mapping mode.
         */
-       lvds-color-map {
+       lvds-color-map-hog {
                gpio-hog;
                gpios = <3 GPIO_ACTIVE_HIGH>; /* SODIMM 95 */
                line-name = "LVDS_COLOR_MAP";