km/common: remove obsolete defines and header

These defines and the header keymile_hdlc_enet.h are obsolete
due to the removed hdlc code.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>

diff --git a/board/keymile/common/keymile_hdlc_enet.h b/board/keymile/common/keymile_hdlc_enet.h
deleted file mode 100644 (file)
index db1560f..0000000
--- a/board/keymile/common/keymile_hdlc_enet.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * (C) Copyright 2008
- * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _KEYMILE_HDLC_ENET_H_
-#define _KEYMILE_HDLC_ENET_H_
-
-/* Unfortuantely, we have do this to get the flag defines in the cbd_t */
-#ifdef CONFIG_KM8XX
-#include <commproc.h>
-#endif
-#ifdef CONFIG_MGCOGE
-#include <mpc8260.h>
-#include <asm/cpm_8260.h>
-#endif
-
-/*
- * Defines for the ICN protocol used for communication over HDLC
- * on the backplane between MGSUVDs and MGCOGEs.
- */
-
-/*
- * MAC which is reserved for communication (0x00 - 0xff in the last byte,
- * which is the slot number)
- */
-
-/*
- * A DLL frame looks like this:
- *  8 bit  |  8 bit     |  8 bit |  8 bit     | n * 8 bit| 16 bit|  8 bit
- *  opening| destination| source | application|  data    |  FCS  | closing
- *   flag  |  address   | address|            |          |       |  flag
- *  (HW)      (APP)       (APP)      (APP)       (APP)      (HW)   (HW)
- */
-
-/*
- * The opening flag, the FCS and the closing flag are set by the hardware so
- * they are not reflected in this struct.
- */
-struct icn_hdr {
-       unsigned char dest_addr;
-       unsigned char src_addr;
-       unsigned char application;
-} __attribute__((packed));
-
-#define ICNHDR_LEN     (sizeof(struct icn_hdr))
-#define CRC_LEN                (sizeof(short))
-/* bytes to remove from packet before sending it upstream */
-#define REMOVE         (ICNHDR_LEN + CRC_LEN)
-
-struct icn_frame {
-       struct icn_hdr hdr;
-       unsigned char data[0];  /* a place holder */
-} __attribute__((packed));
-
-/* Address field */
-#define HDLC_UUA       0x00 /* Unicast Unit Address */
-#define HDLC_UUA_MASK  0x3f /* the last 6 bits contain the slot number */
-#define SET_HDLC_UUA(x) ((HDLC_UUA | ((x) & HDLC_UUA_MASK)))
-#define HDLC_UACUA     0x7f /* Unicast Active Control Unit Address */
-#define HDLC_BCAST     0xff /* broadcast */
-
-/* Application field */
-#define MGS_UUSP       0x00
-#define MGS_UREP       0x01
-#define MGS_IUP                0x02
-#define MGS_UTA                0x03
-#define MGS_MDS                0x04
-#define MGS_ITIME      0x05
-/* added by DENX */
-#define MGS_NETCONS    0x06    /* netconsole */
-#define MGS_TFTP       0x07
-
-/* Useful defines for buffer sizes, etc. */
-#define HDLC_PKTBUFSRX         32
-#define MAX_FRAME_LENGTH       1500 /* ethernet frame size */
-                        /*   14        +    28     */
-#define INET_HDR_SIZE  (ETHER_HDR_SIZE + IP_HDR_SIZE)
-#define INET_HDR_ALIGN (((INET_HDR_SIZE + PKTALIGN - 1) / PKTALIGN) * PKTALIGN)
-/* INET_HDR_SIZE is stripped off */
-#define PKT_MAXBLR_SIZE        (MAX_FRAME_LENGTH + INET_HDR_ALIGN)
-
-/*
- * It is too slow to read always the port numbers and IP addresses from the
- * string variables.
- * cachedNumbers is meant to cache it.
- * THIS IS ONLY A SPEED IMPROVEMENT!
- */
-enum {
-       IP_ADDR = 0,    /* getenv_IPaddr("serverip"); */
-       IP_SERVER,      /* getenv_IPaddr("ipaddr"); */
-       TFTP_SRC_PORT,  /* simple_strtol(getenv("tftpsrcp"), NULL, 10); */
-       TFTP_DST_PORT,  /* simple_strtol(getenv("tftpdstp"), NULL, 10); */
-       NETCONS_PORT,   /* simple_strtol(getenv("ncip"), NULL, 10); */
-       CACHEDNUMBERS
-};
-
-#define WELL_KNOWN_PORT 69     /* Well known TFTP port # */
-
-/* define this to create a test commend (htest) */
-#undef TEST_IT
-#ifdef TEST_IT
-/* have to save a copy of the eth_device for the test command's use */
-struct eth_device *seth;
-#endif
-/* define this for outputting of received packets */
-#undef TEST_RX
-/* define this for outputting of packets being sent */
-#undef TEST_TX
-
-#endif /* _KEYMILE_HDLC_ENET_H_ */

diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index c0df6d8..89a652f 100644 (file)
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -83,16 +83,6 @@
 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 #define CONFIG_SYS_BOARD_DRAM_INIT     /* Used board specific dram_init */
 
-/*
- * How to get access to the slot ID.  Put this here to make it easy
- * to modify in a centralized location.  This is used in the HDLC
- * driver to set the MAC.
-*/
-#define CONFIG_CHECK_ETHERNET_PRESENT
-#define CONFIG_SYS_SLOT_ID_BASE                CONFIG_SYS_KMBEC_FPGA_BASE
-#define CONFIG_SYS_SLOT_ID_OFF         (0x07)  /* register offset */
-#define CONFIG_SYS_SLOT_ID_MASK                (0x3f)  /* mask for slot ID bits */
-
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_MAX_I2C_BUS         1
 #define CONFIG_SYS_I2C_INIT_BOARD