+2013-05-07 Tom Tromey <tromey@redhat.com>
+
+ * lib/selftest-support.exp: New file.
+ * gdb.gdb/complaints.exp: Load selftest-support.exp. Use
+ do_self_tests.
+ (setup_test, find_gdb): Remove.
+ * gdb.gdb/observer.exp: Load selftest-support.exp. Use
+ do_self_tests.
+ (setup_test, find_gdb): Remove.
+ (test_observer): Don't call setup_test. Remove argument.
+ * gdb.gdb/selftest.exp: Load selftest-support.exp.
+ (find_gdb): Remove.
+ * gdb.gdb/complaints.exp: Load selftest-support.exp. Use
+ do_self_tests.
+ (setup_test, find_gdb): Remove.
+ (test_with_self): Don't call setup_test. Remove argument.
+
2013-05-07 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.arch/system-gcore.exp: Remove.
# derived from xfullpath.exp (written by Joel Brobecker), derived from
# selftest.exp (written by Rob Savoye).
+load_lib selftest-support.exp
# are we on a target board
if { [is_remote target] || ![isnative] } then {
return
}
-proc setup_test { executable } {
- global gdb_prompt
- global timeout
- global INTERNAL_GDBFLAGS
-
- # load yourself into the debugger
- # This can take a relatively long time, particularly for testing where
- # the executable is being accessed over a network, or where gdb does not
- # support partial symbols for a particular target and has to load the
- # entire symbol table. Set the timeout to 10 minutes, which should be
- # adequate for most environments (it *has* timed out with 5 min on a
- # SPARCstation SLC under moderate load, so this isn't unreasonable).
- # After gdb is started, set the timeout to 30 seconds for the duration
- # of this test, and then back to the original value.
-
- set oldtimeout $timeout
- set timeout 600
- verbose "Timeout is now $timeout seconds" 2
-
- global gdb_file_cmd_debug_info
- set gdb_file_cmd_debug_info "unset"
-
- set result [gdb_load $executable]
- set timeout $oldtimeout
- verbose "Timeout is now $timeout seconds" 2
-
- if { $result != 0 } then {
- return -1
- }
-
- if { $gdb_file_cmd_debug_info != "debug" } then {
- untested "No debug information, skipping testcase."
- return -1
- }
-
- # Set a breakpoint at main
- gdb_test "break captured_command_loop" \
- "Breakpoint.*at.* file.*, line.*" \
- "breakpoint in captured_command_loop"
-
- # run yourself
- # It may take a very long time for the inferior gdb to start (lynx),
- # so we bump it back up for the duration of this command.
- set timeout 600
-
- set description "run until breakpoint at captured_command_loop"
- gdb_test_multiple "run $INTERNAL_GDBFLAGS" "$description" {
- -re "Starting program.*Breakpoint \[0-9\]+,.*captured_command_loop .data.* at .*main.c:.*$gdb_prompt $" {
- pass "$description"
- }
- -re "Starting program.*Breakpoint \[0-9\]+,.*captured_command_loop .data.*$gdb_prompt $" {
- xfail "$description (line numbers scrambled?)"
- }
- -re "vfork: No more processes.*$gdb_prompt $" {
- fail "$description (out of virtual memory)"
- set timeout $oldtimeout
- verbose "Timeout is now $timeout seconds" 2
- return -1
- }
- -re ".*$gdb_prompt $" {
- fail "$description"
- set timeout $oldtimeout
- verbose "Timeout is now $timeout seconds" 2
- return -1
- }
- }
-
- set timeout $oldtimeout
- verbose "Timeout is now $timeout seconds" 2
-
- return 0
-}
-
proc test_initial_complaints { } {
global gdb_prompt
return 0
}
-# Find a pathname to a file that we would execute if the shell was asked
-# to run $arg using the current PATH.
-
-proc find_gdb { arg } {
-
- # If the arg directly specifies an existing executable file, then
- # simply use it.
-
- if [file executable $arg] then {
- return $arg
- }
-
- set result [which $arg]
- if [string match "/" [ string range $result 0 0 ]] then {
- return $result
- }
-
- # If everything fails, just return the unqualified pathname as default
- # and hope for best.
-
- return $arg
-}
-
-# Run the test with self.
-# Copy the file executable file in case this OS doesn't like to edit its own
-# text space.
-
-set GDB_FULLPATH [find_gdb $GDB]
-
-# Remove any old copy lying around.
-remote_file host delete x$tool
-
-gdb_start
-
-set file [remote_download host $GDB_FULLPATH x$tool]
-
-set setup_result [setup_test $file ]
-if {$setup_result <0} then {
- return -1
+do_self_tests captured_command_loop {
+ test_initial_complaints
+ test_serial_complaints
+ test_short_complaints
+ test_empty_complaints
}
-
-test_initial_complaints
-test_serial_complaints
-test_short_complaints
-test_empty_complaints
-
-gdb_exit;
-catch "remote_file host delete $file";
# This file was written by Joel Brobecker (brobecker@gnat.com), derived
# from xfullpath.exp.
+load_lib selftest-support.exp
# are we on a target board
if { [is_remote target] || ![isnative] } then {
return
}
-proc setup_test { executable } {
- global gdb_prompt
- global timeout
- global INTERNAL_GDBFLAGS
-
- # load yourself into the debugger
- # This can take a relatively long time, particularly for testing where
- # the executable is being accessed over a network, or where gdb does not
- # support partial symbols for a particular target and has to load the
- # entire symbol table. Set the timeout to 10 minutes, which should be
- # adequate for most environments (it *has* timed out with 5 min on a
- # SPARCstation SLC under moderate load, so this isn't unreasonable).
- # After gdb is started, set the timeout to 30 seconds for the duration
- # of this test, and then back to the original value.
-
- set oldtimeout $timeout
- set timeout 600
- verbose "Timeout is now $timeout seconds" 2
-
- global gdb_file_cmd_debug_info
- set gdb_file_cmd_debug_info "unset"
-
- set result [gdb_load $executable]
- set timeout $oldtimeout
- verbose "Timeout is now $timeout seconds" 2
-
- if { $result != 0 } then {
- return -1
- }
-
- if { $gdb_file_cmd_debug_info != "debug" } then {
- untested "No debug information, skipping testcase."
- return -1
- }
-
- # Set a breakpoint at main
- gdb_test "break captured_main" \
- "Breakpoint.*at.* file.*, line.*" \
- "breakpoint in captured_main"
-
- # run yourself
- # It may take a very long time for the inferior gdb to start (lynx),
- # so we bump it back up for the duration of this command.
- set timeout 600
-
- set description "run until breakpoint at captured_main"
- gdb_test_multiple "run $INTERNAL_GDBFLAGS" "$description" {
- -re "Starting program.*Breakpoint \[0-9\]+,.*captured_main .data.* at .*main.c:.*$gdb_prompt $" {
- pass "$description"
- }
- -re "Starting program.*Breakpoint \[0-9\]+,.*captured_main .data.*$gdb_prompt $" {
- xfail "$description (line numbers scrambled?)"
- }
- -re "vfork: No more processes.*$gdb_prompt $" {
- fail "$description (out of virtual memory)"
- set timeout $oldtimeout
- verbose "Timeout is now $timeout seconds" 2
- return -1
- }
- -re ".*$gdb_prompt $" {
- fail "$description"
- set timeout $oldtimeout
- verbose "Timeout is now $timeout seconds" 2
- return -1
- }
- }
-
- set timeout $oldtimeout
- verbose "Timeout is now $timeout seconds" 2
-
- return 0
-}
-
proc attach_first_observer { message } {
gdb_test_no_output "set \$first_obs = observer_attach_test_notification (&observer_test_first_notification_function)" \
"$message; attach first observer"
check_counters $first $second $third $message
}
-proc test_observer { executable } {
-
- set setup_result [setup_test $executable]
- if {$setup_result <0} then {
- return -1
- }
-
+proc test_observer {} {
# First, try sending a notification without any observer attached.
test_notifications 0 0 0 "no observer attached"
return 0
}
-# Find a pathname to a file that we would execute if the shell was asked
-# to run $arg using the current PATH.
-
-proc find_gdb { arg } {
-
- # If the arg directly specifies an existing executable file, then
- # simply use it.
-
- if [file executable $arg] then {
- return $arg
- }
-
- set result [which $arg]
- if [string match "/" [ string range $result 0 0 ]] then {
- return $result
- }
-
- # If everything fails, just return the unqualified pathname as default
- # and hope for best.
-
- return $arg
-}
-
-# Run the test with self.
-# Copy the file executable file in case this OS doesn't like to edit its own
-# text space.
-
-set GDB_FULLPATH [find_gdb $GDB]
-
-# Remove any old copy lying around.
-remote_file host delete x$tool
-
-gdb_start
-set file [remote_download host $GDB_FULLPATH x$tool]
-set result [test_observer $file];
-gdb_exit;
-catch "remote_file host delete $file";
-
-if {$result <0} then {
- warning "Couldn't test self"
- return -1
-}
+do_self_tests captured_main test_observer
# This file was written by Rob Savoye. (rob@cygnus.com)
+load_lib selftest-support.exp
# are we on a target board
if { [is_remote target] || ![isnative] } then {
return 0
}
-# Find a pathname to a file that we would execute if the shell was asked
-# to run $arg using the current PATH.
-
-proc find_gdb { arg } {
-
- # If the arg directly specifies an existing executable file, then
- # simply use it.
-
- if [file executable $arg] then {
- return $arg
- }
-
- set result [which $arg]
- if [string match "/" [ string range $result 0 0 ]] then {
- return $result
- }
-
- # If everything fails, just return the unqualified pathname as default
- # and hope for best.
-
- return $arg
-}
-
# Run the test with self.
# Copy the file executable file in case this OS doesn't like to edit its own
# text space.
# This file was written by Joel Brobecker. (brobecker@gnat.com), derived
# from selftest.exp, written by Rob Savoye.
+load_lib selftest-support.exp
# are we on a target board
if { [is_remote target] || ![isnative] } then {
return
}
-proc setup_test { executable } {
- global gdb_prompt
- global timeout
- global INTERNAL_GDBFLAGS
-
- # load yourself into the debugger
- # This can take a relatively long time, particularly for testing where
- # the executable is being accessed over a network, or where gdb does not
- # support partial symbols for a particular target and has to load the
- # entire symbol table. Set the timeout to 10 minutes, which should be
- # adequate for most environments (it *has* timed out with 5 min on a
- # SPARCstation SLC under moderate load, so this isn't unreasonable).
- # After gdb is started, set the timeout to 30 seconds for the duration
- # of this test, and then back to the original value.
-
- set oldtimeout $timeout
- set timeout 600
- verbose "Timeout is now $timeout seconds" 2
-
- global gdb_file_cmd_debug_info
- set gdb_file_cmd_debug_info "unset"
-
- set result [gdb_load $executable]
- set timeout $oldtimeout
- verbose "Timeout is now $timeout seconds" 2
-
- if { $result != 0 } then {
- return -1
- }
-
- if { $gdb_file_cmd_debug_info != "debug" } then {
- untested "No debug information, skipping testcase."
- return -1
- }
-
- # Set a breakpoint at main
- gdb_test "break captured_main" \
- "Breakpoint.*at.* file.*, line.*" \
- "breakpoint in captured_main"
-
- # run yourself
- # It may take a very long time for the inferior gdb to start (lynx),
- # so we bump it back up for the duration of this command.
- set timeout 600
-
- set description "run until breakpoint at captured_main"
- gdb_test_multiple "run $INTERNAL_GDBFLAGS" "$description" {
- -re "Starting program.*Breakpoint \[0-9\]+,.*captured_main .data.* at .*main.c:.*$gdb_prompt $" {
- pass "$description"
- }
- -re "Starting program.*Breakpoint \[0-9\]+,.*captured_main .data.*$gdb_prompt $" {
- xfail "$description (line numbers scrambled?)"
- }
- -re "vfork: No more processes.*$gdb_prompt $" {
- fail "$description (out of virtual memory)"
- set timeout $oldtimeout
- verbose "Timeout is now $timeout seconds" 2
- return -1
- }
- -re ".*$gdb_prompt $" {
- fail "$description"
- set timeout $oldtimeout
- verbose "Timeout is now $timeout seconds" 2
- return -1
- }
- }
-
- set timeout $oldtimeout
- verbose "Timeout is now $timeout seconds" 2
-
- return 0
-}
-
-proc test_with_self { executable } {
-
- set setup_result [setup_test $executable]
- if {$setup_result <0} then {
- return -1
- }
-
+proc test_with_self {} {
# A file which contains a directory prefix
gdb_test "print gdb_realpath (\"./xfullpath.exp\")" \
".\[0-9\]+ =.*\".*/xfullpath.exp\"" \
return 0
}
-# Find a pathname to a file that we would execute if the shell was asked
-# to run $arg using the current PATH.
-
-proc find_gdb { arg } {
-
- # If the arg directly specifies an existing executable file, then
- # simply use it.
-
- if [file executable $arg] then {
- return $arg
- }
-
- set result [which $arg]
- if [string match "/" [ string range $result 0 0 ]] then {
- return $result
- }
-
- # If everything fails, just return the unqualified pathname as default
- # and hope for best.
-
- return $arg
-}
-
-# Run the test with self.
-# Copy the file executable file in case this OS doesn't like to edit its own
-# text space.
-
-set GDB_FULLPATH [find_gdb $GDB]
-
-# Remove any old copy lying around.
-remote_file host delete x$tool
-
-gdb_start
-set file [remote_download host $GDB_FULLPATH x$tool]
-set result [test_with_self $file];
-gdb_exit;
-catch "remote_file host delete $file";
-
-if {$result <0} then {
- warning "Couldn't test self"
- return -1
-}
+do_self_tests captured_main test_with_self
--- /dev/null
+# Copyright 2003-2013 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Find a pathname to a file that we would execute if the shell was asked
+# to run $arg using the current PATH.
+
+proc find_gdb { arg } {
+
+ # If the arg directly specifies an existing executable file, then
+ # simply use it.
+
+ if [file executable $arg] then {
+ return $arg
+ }
+
+ set result [which $arg]
+ if [string match "/" [ string range $result 0 0 ]] then {
+ return $result
+ }
+
+ # If everything fails, just return the unqualified pathname as default
+ # and hope for best.
+
+ return $arg
+}
+
+# A helper proc that sets up for self-testing.
+# EXECUTABLE is the gdb to use.
+# FUNCTION is the function to break in, either captured_main
+# or captured_command_loop.
+
+proc selftest_setup { executable function } {
+ global gdb_prompt
+ global timeout
+ global INTERNAL_GDBFLAGS
+
+ # load yourself into the debugger
+ # This can take a relatively long time, particularly for testing where
+ # the executable is being accessed over a network, or where gdb does not
+ # support partial symbols for a particular target and has to load the
+ # entire symbol table. Set the timeout to 10 minutes, which should be
+ # adequate for most environments (it *has* timed out with 5 min on a
+ # SPARCstation SLC under moderate load, so this isn't unreasonable).
+ # After gdb is started, set the timeout to 30 seconds for the duration
+ # of this test, and then back to the original value.
+
+ set oldtimeout $timeout
+ set timeout 600
+ verbose "Timeout is now $timeout seconds" 2
+
+ global gdb_file_cmd_debug_info
+ set gdb_file_cmd_debug_info "unset"
+
+ set result [gdb_load $executable]
+ set timeout $oldtimeout
+ verbose "Timeout is now $timeout seconds" 2
+
+ if { $result != 0 } then {
+ return -1
+ }
+
+ if { $gdb_file_cmd_debug_info != "debug" } then {
+ untested "No debug information, skipping testcase."
+ return -1
+ }
+
+ # Set a breakpoint at main
+ gdb_test "break $function" \
+ "Breakpoint.*at.* file.*, line.*" \
+ "breakpoint in $function"
+
+ # run yourself
+ # It may take a very long time for the inferior gdb to start (lynx),
+ # so we bump it back up for the duration of this command.
+ set timeout 600
+
+ set description "run until breakpoint at $function"
+ gdb_test_multiple "run $INTERNAL_GDBFLAGS" "$description" {
+ -re "Starting program.*Breakpoint \[0-9\]+,.*$function .data.* at .*main.c:.*$gdb_prompt $" {
+ pass "$description"
+ }
+ -re "Starting program.*Breakpoint \[0-9\]+,.*$function .data.*$gdb_prompt $" {
+ xfail "$description (line numbers scrambled?)"
+ }
+ -re "vfork: No more processes.*$gdb_prompt $" {
+ fail "$description (out of virtual memory)"
+ set timeout $oldtimeout
+ verbose "Timeout is now $timeout seconds" 2
+ return -1
+ }
+ -re ".*$gdb_prompt $" {
+ fail "$description"
+ set timeout $oldtimeout
+ verbose "Timeout is now $timeout seconds" 2
+ return -1
+ }
+ }
+
+ set timeout $oldtimeout
+ verbose "Timeout is now $timeout seconds" 2
+
+ return 0
+}
+
+# A simple way to run some self-tests.
+
+proc do_self_tests {function body} {
+ global GDB tool
+
+ # Run the test with self. Copy the file executable file in case
+ # this OS doesn't like to edit its own text space.
+
+ set GDB_FULLPATH [find_gdb $GDB]
+
+ # Remove any old copy lying around.
+ remote_file host delete x$tool
+
+ gdb_start
+ set file [remote_download host $GDB_FULLPATH x$tool]
+
+ set result [selftest_setup $file $function]
+ if {$result == 0} then {
+ set result [uplevel $body]
+ }
+
+ gdb_exit
+ catch "remote_file host delete $file"
+
+ if {$result < 0} then {
+ warning "Couldn't test self"
+ }
+}
projects / external / binutils.git / commitdiff