/*
* Freescale MPC85xx Memory Controller kenel module
*
+ * Parts Copyrighted (c) 2013 by Freescale Semiconductor, Inc.
+ *
* Author: Dave Jiang <djiang@mvista.com>
*
* 2006-2007 (c) MontaVista Software, Inc. This file is licensed under
edac_pci_handle_npe(pci, pci->ctl_name);
}
+static void mpc85xx_pcie_check(struct edac_pci_ctl_info *pci)
+{
+ struct mpc85xx_pci_pdata *pdata = pci->pvt_info;
+ u32 err_detect;
+
+ err_detect = in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR);
+
+ pr_err("PCIe error(s) detected\n");
+ pr_err("PCIe ERR_DR register: 0x%08x\n", err_detect);
+ pr_err("PCIe ERR_CAP_STAT register: 0x%08x\n",
+ in_be32(pdata->pci_vbase + MPC85XX_PCI_GAS_TIMR));
+ pr_err("PCIe ERR_CAP_R0 register: 0x%08x\n",
+ in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R0));
+ pr_err("PCIe ERR_CAP_R1 register: 0x%08x\n",
+ in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R1));
+ pr_err("PCIe ERR_CAP_R2 register: 0x%08x\n",
+ in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R2));
+ pr_err("PCIe ERR_CAP_R3 register: 0x%08x\n",
+ in_be32(pdata->pci_vbase + MPC85XX_PCIE_ERR_CAP_R3));
+
+ /* clear error bits */
+ out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, err_detect);
+}
+
+static int mpc85xx_pcie_find_capability(struct device_node *np)
+{
+ struct pci_controller *hose;
+
+ if (!np)
+ return -EINVAL;
+
+ hose = pci_find_hose_for_OF_device(np);
+
+ return early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP);
+}
+
static irqreturn_t mpc85xx_pci_isr(int irq, void *dev_id)
{
struct edac_pci_ctl_info *pci = dev_id;
if (!err_detect)
return IRQ_NONE;
- mpc85xx_pci_check(pci);
+ if (pdata->is_pcie)
+ mpc85xx_pcie_check(pci);
+ else
+ mpc85xx_pci_check(pci);
return IRQ_HANDLED;
}
pdata = pci->pvt_info;
pdata->name = "mpc85xx_pci_err";
pdata->irq = NO_IRQ;
+
+ if (mpc85xx_pcie_find_capability(op->dev.of_node) > 0)
+ pdata->is_pcie = true;
+
dev_set_drvdata(&op->dev, pci);
pci->dev = &op->dev;
pci->mod_name = EDAC_MOD_STR;
pci->ctl_name = pdata->name;
pci->dev_name = dev_name(&op->dev);
- if (edac_op_state == EDAC_OPSTATE_POLL)
- pci->edac_check = mpc85xx_pci_check;
+ if (edac_op_state == EDAC_OPSTATE_POLL) {
+ if (pdata->is_pcie)
+ pci->edac_check = mpc85xx_pcie_check;
+ else
+ pci->edac_check = mpc85xx_pci_check;
+ }
pdata->edac_idx = edac_pci_idx++;
goto err;
}
- orig_pci_err_cap_dr =
- in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_CAP_DR);
+ if (pdata->is_pcie) {
+ orig_pci_err_cap_dr =
+ in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR);
+ out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR, ~0);
+ orig_pci_err_en =
+ in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN);
+ out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, 0);
+ } else {
+ orig_pci_err_cap_dr =
+ in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_CAP_DR);
- /* PCI master abort is expected during config cycles */
- out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_CAP_DR, 0x40);
+ /* PCI master abort is expected during config cycles */
+ out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_CAP_DR, 0x40);
- orig_pci_err_en = in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN);
+ orig_pci_err_en =
+ in_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN);
- /* disable master abort reporting */
- out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, ~0x40);
+ /* disable master abort reporting */
+ out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, ~0x40);
+ }
/* clear error bits */
out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_DR, ~0);
if (edac_op_state == EDAC_OPSTATE_INT) {
pdata->irq = irq_of_parse_and_map(op->dev.of_node, 0);
res = devm_request_irq(&op->dev, pdata->irq,
- mpc85xx_pci_isr, IRQF_DISABLED,
+ mpc85xx_pci_isr,
+ IRQF_DISABLED | IRQF_SHARED,
"[EDAC] PCI err", pci);
if (res < 0) {
printk(KERN_ERR
pdata->irq);
}
+ if (pdata->is_pcie) {
+ /*
+ * Enable all PCIe error interrupt & error detect except invalid
+ * PEX_CONFIG_ADDR/PEX_CONFIG_DATA access interrupt generation
+ * enable bit and invalid PEX_CONFIG_ADDR/PEX_CONFIG_DATA access
+ * detection enable bit. Because PCIe bus code to initialize and
+ * configure these PCIe devices on booting will use some invalid
+ * PEX_CONFIG_ADDR/PEX_CONFIG_DATA, edac driver prints the much
+ * notice information. So disable this detect to fix ugly print.
+ */
+ out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_EN, ~0
+ & ~PEX_ERR_ICCAIE_EN_BIT);
+ out_be32(pdata->pci_vbase + MPC85XX_PCI_ERR_ADDR, 0
+ | PEX_ERR_ICCAD_DISR_BIT);
+ }
+
devres_remove_group(&op->dev, mpc85xx_pci_err_probe);
edac_dbg(3, "success\n");
printk(KERN_INFO EDAC_MOD_STR " PCI err registered\n");