Support for the following Marvell Kirkwood series SoCs:
88F6180, 88F6192 and 88F6281.
-config ARCH_LOKI
- bool "Marvell Loki (88RC8480)"
- select CPU_FEROCEON
- select GENERIC_CLOCKEVENTS
- select PLAT_ORION
- help
- Support for the Marvell Loki (88RC8480) SoC.
-
config ARCH_LPC32XX
bool "NXP LPC32XX"
select CLKSRC_MMIO
source "arch/arm/mach-ks8695/Kconfig"
-source "arch/arm/mach-loki/Kconfig"
-
source "arch/arm/mach-lpc32xx/Kconfig"
source "arch/arm/mach-msm/Kconfig"
machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
machine-$(CONFIG_ARCH_KS8695) := ks8695
-machine-$(CONFIG_ARCH_LOKI) := loki
machine-$(CONFIG_ARCH_LPC32XX) := lpc32xx
machine-$(CONFIG_ARCH_MMP) := mmp
machine-$(CONFIG_ARCH_MSM) := msm
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_LOKI=y
-CONFIG_MACH_LB88RC8480=y
-# CONFIG_CPU_FEROCEON_OLD_ID is not set
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_NET_PKTGEN=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_NFTL=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-CONFIG_MTD_CFI_I4=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_ORION=y
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_ATA=y
-CONFIG_SATA_MV=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_MV643XX_ETH=y
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_SPI=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_NEW_LEDS=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_XFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_LDM_DEBUG=y
-CONFIG_SUN_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRC_CCITT=y
-CONFIG_CRC16=y
-CONFIG_LIBCRC32C=y
+++ /dev/null
-if ARCH_LOKI
-
-menu "Marvell Loki (88RC8480) Implementations"
-
-config MACH_LB88RC8480
- bool "Marvell LB88RC8480 Development Board"
- help
- Say 'Y' here if you want your kernel to support the
- Marvell LB88RC8480 Development Board.
-
-endmenu
-
-endif
+++ /dev/null
-obj-y += common.o addr-map.o irq.o
-
-obj-$(CONFIG_MACH_LB88RC8480) += lb88rc8480-setup.o
+++ /dev/null
- zreladdr-y := 0x00008000
-params_phys-y := 0x00000100
-initrd_phys-y := 0x00800000
+++ /dev/null
-/*
- * arch/arm/mach-loki/addr-map.c
- *
- * Address map functions for Marvell Loki (88RC8480) SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include "common.h"
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define TARGET_DDR 0
-#define TARGET_DEV_BUS 1
-#define TARGET_PCIE0 3
-#define TARGET_PCIE1 4
-#define ATTR_DEV_BOOT 0x0f
-#define ATTR_DEV_CS2 0x1b
-#define ATTR_DEV_CS1 0x1d
-#define ATTR_DEV_CS0 0x1e
-#define ATTR_PCIE_IO 0x51
-#define ATTR_PCIE_MEM 0x59
-
-/*
- * Helpers to get DDR bank info
- */
-#define DDR_SIZE_CS(n) DDR_REG(0x1500 + ((n) << 3))
-#define DDR_BASE_CS(n) DDR_REG(0x1504 + ((n) << 3))
-
-/*
- * CPU Address Decode Windows registers
- */
-#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x))
-#define CPU_WIN_CTRL(n) BRIDGE_REG(0x000 | ((n) << 4))
-#define CPU_WIN_BASE(n) BRIDGE_REG(0x004 | ((n) << 4))
-#define CPU_WIN_REMAP_LO(n) BRIDGE_REG(0x008 | ((n) << 4))
-#define CPU_WIN_REMAP_HI(n) BRIDGE_REG(0x00c | ((n) << 4))
-
-
-struct mbus_dram_target_info loki_mbus_dram_info;
-
-static void __init setup_cpu_win(int win, u32 base, u32 size,
- u8 target, u8 attr, int remap)
-{
- u32 ctrl;
-
- base &= 0xffff0000;
- ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (1 << 5) | target;
-
- writel(base, CPU_WIN_BASE(win));
- writel(ctrl, CPU_WIN_CTRL(win));
- if (win < 2) {
- if (remap < 0)
- remap = base;
-
- writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
- writel(0, CPU_WIN_REMAP_HI(win));
- }
-}
-
-void __init loki_setup_cpu_mbus(void)
-{
- int i;
- int cs;
-
- /*
- * First, disable and clear windows.
- */
- for (i = 0; i < 8; i++) {
- writel(0, CPU_WIN_BASE(i));
- writel(0, CPU_WIN_CTRL(i));
- if (i < 2) {
- writel(0, CPU_WIN_REMAP_LO(i));
- writel(0, CPU_WIN_REMAP_HI(i));
- }
- }
-
- /*
- * Setup windows for PCIe IO+MEM space.
- */
- setup_cpu_win(2, LOKI_PCIE0_MEM_PHYS_BASE, LOKI_PCIE0_MEM_SIZE,
- TARGET_PCIE0, ATTR_PCIE_MEM, -1);
- setup_cpu_win(3, LOKI_PCIE1_MEM_PHYS_BASE, LOKI_PCIE1_MEM_SIZE,
- TARGET_PCIE1, ATTR_PCIE_MEM, -1);
-
- /*
- * Setup MBUS dram target info.
- */
- loki_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-
- for (i = 0, cs = 0; i < 4; i++) {
- u32 base = readl(DDR_BASE_CS(i));
- u32 size = readl(DDR_SIZE_CS(i));
-
- /*
- * Chip select enabled?
- */
- if (size & 1) {
- struct mbus_dram_window *w;
-
- w = &loki_mbus_dram_info.cs[cs++];
- w->cs_index = i;
- w->mbus_attr = 0xf & ~(1 << i);
- w->base = base & 0xffff0000;
- w->size = (size | 0x0000ffff) + 1;
- }
- }
- loki_mbus_dram_info.num_cs = cs;
-}
-
-void __init loki_setup_dev_boot_win(u32 base, u32 size)
-{
- setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
-}
+++ /dev/null
-/*
- * arch/arm/mach-loki/common.c
- *
- * Core functions for Marvell Loki (88RC8480) SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/mbus.h>
-#include <linux/dma-mapping.h>
-#include <asm/page.h>
-#include <asm/timex.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <mach/bridge-regs.h>
-#include <mach/loki.h>
-#include <plat/orion_nand.h>
-#include <plat/time.h>
-#include <plat/common.h>
-#include "common.h"
-
-/*****************************************************************************
- * I/O Address Mapping
- ****************************************************************************/
-static struct map_desc loki_io_desc[] __initdata = {
- {
- .virtual = LOKI_REGS_VIRT_BASE,
- .pfn = __phys_to_pfn(LOKI_REGS_PHYS_BASE),
- .length = LOKI_REGS_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-void __init loki_map_io(void)
-{
- iotable_init(loki_io_desc, ARRAY_SIZE(loki_io_desc));
-}
-
-
-/*****************************************************************************
- * GE00
- ****************************************************************************/
-void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
-{
- writel(0x00079220, GE0_VIRT_BASE + 0x20b0);
-
- orion_ge00_init(eth_data, &loki_mbus_dram_info,
- GE0_PHYS_BASE, IRQ_LOKI_GBE_A_INT,
- 0, LOKI_TCLK);
-}
-
-
-/*****************************************************************************
- * GE01
- ****************************************************************************/
-void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)
-{
- writel(0x00079220, GE1_VIRT_BASE + 0x20b0);
-
- orion_ge01_init(eth_data, &loki_mbus_dram_info,
- GE1_PHYS_BASE, IRQ_LOKI_GBE_B_INT,
- 0, LOKI_TCLK);
-}
-
-
-/*****************************************************************************
- * SAS/SATA
- ****************************************************************************/
-static struct resource loki_sas_resources[] = {
- {
- .name = "mvsas0 mem",
- .start = SAS0_PHYS_BASE,
- .end = SAS0_PHYS_BASE + 0x01ff,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "mvsas0 irq",
- .start = IRQ_LOKI_SAS_A,
- .end = IRQ_LOKI_SAS_A,
- .flags = IORESOURCE_IRQ,
- }, {
- .name = "mvsas1 mem",
- .start = SAS1_PHYS_BASE,
- .end = SAS1_PHYS_BASE + 0x01ff,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "mvsas1 irq",
- .start = IRQ_LOKI_SAS_B,
- .end = IRQ_LOKI_SAS_B,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device loki_sas = {
- .name = "mvsas",
- .id = 0,
- .dev = {
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = ARRAY_SIZE(loki_sas_resources),
- .resource = loki_sas_resources,
-};
-
-void __init loki_sas_init(void)
-{
- writel(0x8300f707, DDR_REG(0x1424));
- platform_device_register(&loki_sas);
-}
-
-
-/*****************************************************************************
- * UART0
- ****************************************************************************/
-void __init loki_uart0_init(void)
-{
- orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
- IRQ_LOKI_UART0, LOKI_TCLK);
-}
-
-/*****************************************************************************
- * UART1
- ****************************************************************************/
-void __init loki_uart1_init(void)
-{
- orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
- IRQ_LOKI_UART1, LOKI_TCLK);
-}
-
-
-/*****************************************************************************
- * Time handling
- ****************************************************************************/
-void __init loki_init_early(void)
-{
- orion_time_set_base(TIMER_VIRT_BASE);
-}
-
-static void loki_timer_init(void)
-{
- orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
- IRQ_LOKI_BRIDGE, LOKI_TCLK);
-}
-
-struct sys_timer loki_timer = {
- .init = loki_timer_init,
-};
-
-
-/*****************************************************************************
- * General
- ****************************************************************************/
-void __init loki_init(void)
-{
- printk(KERN_INFO "Loki ID: 88RC8480. TCLK=%d.\n", LOKI_TCLK);
-
- loki_setup_cpu_mbus();
-}
+++ /dev/null
-/*
- * arch/arm/mach-loki/common.h
- *
- * Core functions for Marvell Loki (88RC8480) SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ARCH_LOKI_COMMON_H
-#define __ARCH_LOKI_COMMON_H
-
-struct mv643xx_eth_platform_data;
-
-/*
- * Basic Loki init functions used early by machine-setup.
- */
-void loki_map_io(void);
-void loki_init(void);
-void loki_init_early(void);
-void loki_init_irq(void);
-
-extern struct mbus_dram_target_info loki_mbus_dram_info;
-void loki_setup_cpu_mbus(void);
-void loki_setup_dev_boot_win(u32 base, u32 size);
-
-void loki_ge0_init(struct mv643xx_eth_platform_data *eth_data);
-void loki_ge1_init(struct mv643xx_eth_platform_data *eth_data);
-void loki_sas_init(void);
-void loki_uart0_init(void);
-void loki_uart1_init(void);
-
-extern struct sys_timer loki_timer;
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-loki/include/mach/bridge-regs.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_BRIDGE_REGS_H
-#define __ASM_ARCH_BRIDGE_REGS_H
-
-#include <mach/loki.h>
-
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
-#define SOFT_RESET 0x00000001
-
-#define BRIDGE_INT_TIMER1_CLR 0x0004
-
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
-#define IRQ_CAUSE_OFF 0x0000
-#define IRQ_MASK_OFF 0x0004
-
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-loki/include/mach/debug-macro.S
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <mach/loki.h>
-
- .macro addruart, rp, rv
- ldr \rp, =LOKI_REGS_PHYS_BASE
- ldr \rv, =LOKI_REGS_VIRT_BASE
- orr \rp, \rp, #0x00012000
- orr \rv, \rv, #0x00012000
- .endm
-
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
+++ /dev/null
-/*
- * arch/arm/mach-loki/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <mach/bridge-regs.h>
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =IRQ_VIRT_BASE
- .endm
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #IRQ_CAUSE_OFF]
- ldr \tmp, [\base, #IRQ_MASK_OFF]
- mov \irqnr, #0
- ands \irqstat, \irqstat, \tmp
- clzne \irqnr, \irqstat
- rsbne \irqnr, \irqnr, #31
- .endm
+++ /dev/null
-/*
- * arch/arm/mach-loki/include/mach/hardware.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include "loki.h"
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-loki/include/mach/io.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include "loki.h"
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-static inline void __iomem *__io(unsigned long addr)
-{
- return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE)
- + LOKI_PCIE0_IO_VIRT_BASE);
-}
-
-#define __io(a) __io(a)
-#define __mem_pci(a) (a)
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-loki/include/mach/irqs.h
- *
- * IRQ definitions for Marvell Loki (88RC8480) SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include "loki.h" /* need GPIO_MAX */
-
-/*
- * Interrupt Controller
- */
-#define IRQ_LOKI_PCIE_A_CPU_DRBL 0
-#define IRQ_LOKI_CPU_PCIE_A_DRBL 1
-#define IRQ_LOKI_PCIE_B_CPU_DRBL 2
-#define IRQ_LOKI_CPU_PCIE_B_DRBL 3
-#define IRQ_LOKI_COM_A_ERR 6
-#define IRQ_LOKI_COM_A_IN 7
-#define IRQ_LOKI_COM_A_OUT 8
-#define IRQ_LOKI_COM_B_ERR 9
-#define IRQ_LOKI_COM_B_IN 10
-#define IRQ_LOKI_COM_B_OUT 11
-#define IRQ_LOKI_DMA_A 12
-#define IRQ_LOKI_DMA_B 13
-#define IRQ_LOKI_SAS_A 14
-#define IRQ_LOKI_SAS_B 15
-#define IRQ_LOKI_DDR 16
-#define IRQ_LOKI_XOR 17
-#define IRQ_LOKI_BRIDGE 18
-#define IRQ_LOKI_PCIE_A_ERR 20
-#define IRQ_LOKI_PCIE_A_INT 21
-#define IRQ_LOKI_PCIE_B_ERR 22
-#define IRQ_LOKI_PCIE_B_INT 23
-#define IRQ_LOKI_GBE_A_INT 24
-#define IRQ_LOKI_GBE_B_INT 25
-#define IRQ_LOKI_DEV_ERR 26
-#define IRQ_LOKI_UART0 27
-#define IRQ_LOKI_UART1 28
-#define IRQ_LOKI_TWSI 29
-#define IRQ_LOKI_GPIO_23_0 30
-#define IRQ_LOKI_GPIO_25_24 31
-
-/*
- * Loki General Purpose Pins
- */
-#define IRQ_LOKI_GPIO_START 32
-#define NR_GPIO_IRQS GPIO_MAX
-
-#define NR_IRQS (IRQ_LOKI_GPIO_START + NR_GPIO_IRQS)
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-loki/include/mach/loki.h
- *
- * Generic definitions for Marvell Loki (88RC8480) SoC flavors
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_LOKI_H
-#define __ASM_ARCH_LOKI_H
-
-/*
- * Marvell Loki (88RC8480) address maps.
- *
- * phys
- * d0000000 on-chip peripheral registers
- * e0000000 PCIe 0 Memory space
- * e8000000 PCIe 1 Memory space
- * f0000000 PCIe 0 I/O space
- * f0100000 PCIe 1 I/O space
- *
- * virt phys size
- * fed00000 d0000000 1M on-chip peripheral registers
- * fee00000 f0000000 64K PCIe 0 I/O space
- * fef00000 f0100000 64K PCIe 1 I/O space
- */
-
-#define LOKI_REGS_PHYS_BASE 0xd0000000
-#define LOKI_REGS_VIRT_BASE 0xfed00000
-#define LOKI_REGS_SIZE SZ_1M
-
-#define LOKI_PCIE0_IO_PHYS_BASE 0xf0000000
-#define LOKI_PCIE0_IO_VIRT_BASE 0xfee00000
-#define LOKI_PCIE0_IO_BUS_BASE 0x00000000
-#define LOKI_PCIE0_IO_SIZE SZ_64K
-
-#define LOKI_PCIE1_IO_PHYS_BASE 0xf0100000
-#define LOKI_PCIE1_IO_VIRT_BASE 0xfef00000
-#define LOKI_PCIE1_IO_BUS_BASE 0x00000000
-#define LOKI_PCIE1_IO_SIZE SZ_64K
-
-#define LOKI_PCIE0_MEM_PHYS_BASE 0xe0000000
-#define LOKI_PCIE0_MEM_SIZE SZ_128M
-
-#define LOKI_PCIE1_MEM_PHYS_BASE 0xe8000000
-#define LOKI_PCIE1_MEM_SIZE SZ_128M
-
-/*
- * Register Map
- */
-#define DEV_BUS_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x10000)
-#define DEV_BUS_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x10000)
-#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
-#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
-#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
-#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
-
-#define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000)
-
-#define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000)
-
-#define PCIE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x40000)
-
-#define SAS0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x80000)
-
-#define SAS1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x90000)
-
-#define GE0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xa0000)
-#define GE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xa0000)
-
-#define GE1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xb0000)
-#define GE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xb0000)
-
-#define DDR_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xf0000)
-#define DDR_REG(x) (DDR_VIRT_BASE | (x))
-
-
-#define GPIO_MAX 8
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-loki/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-loki/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/bridge-regs.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-static inline void arch_reset(char mode, const char *cmd)
-{
- /*
- * Enable soft reset to assert RSTOUTn.
- */
- writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
- /*
- * Assert soft reset.
- */
- writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
- while (1)
- ;
-}
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-loki/include/mach/timex.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#define CLOCK_TICK_RATE (100 * HZ)
-
-#define LOKI_TCLK 180000000
+++ /dev/null
-/*
- * arch/arm/mach-loki/include/mach/uncompress.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/serial_reg.h>
-#include <mach/loki.h>
-
-#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
-
-static void putc(const char c)
-{
- unsigned char *base = SERIAL_BASE;
- int i;
-
- for (i = 0; i < 0x1000; i++) {
- if (base[UART_LSR << 2] & UART_LSR_THRE)
- break;
- barrier();
- }
-
- base[UART_TX << 2] = c;
-}
-
-static void flush(void)
-{
- unsigned char *base = SERIAL_BASE;
- unsigned char mask;
- int i;
-
- mask = UART_LSR_TEMT | UART_LSR_THRE;
-
- for (i = 0; i < 0x1000; i++) {
- if ((base[UART_LSR << 2] & mask) == mask)
- break;
- barrier();
- }
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-#define arch_decomp_wdog()
+++ /dev/null
-/*
- * arch/arm/mach-loki/include/mach/vmalloc.h
- */
-
-#define VMALLOC_END 0xfe800000UL
+++ /dev/null
-/*
- * arch/arm/mach-loki/irq.c
- *
- * Marvell Loki (88RC8480) IRQ handling.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <mach/bridge-regs.h>
-#include <plat/irq.h>
-#include "common.h"
-
-void __init loki_init_irq(void)
-{
- orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_OFF));
-}
+++ /dev/null
-/*
- * arch/arm/mach-loki/lb88rc8480-setup.c
- *
- * Marvell LB88RC8480 Development Board Setup
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/timer.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/loki.h>
-#include "common.h"
-
-#define LB88RC8480_FLASH_BOOT_CS_BASE 0xf8000000
-#define LB88RC8480_FLASH_BOOT_CS_SIZE SZ_128M
-
-#define LB88RC8480_NOR_BOOT_BASE 0xff000000
-#define LB88RC8480_NOR_BOOT_SIZE SZ_16M
-
-static struct mtd_partition lb88rc8480_boot_flash_parts[] = {
- {
- .name = "kernel",
- .offset = 0,
- .size = SZ_2M,
- }, {
- .name = "root-fs",
- .offset = SZ_2M,
- .size = (SZ_8M + SZ_4M + SZ_1M),
- }, {
- .name = "u-boot",
- .offset = (SZ_8M + SZ_4M + SZ_2M + SZ_1M),
- .size = SZ_1M,
- },
-};
-
-static struct physmap_flash_data lb88rc8480_boot_flash_data = {
- .parts = lb88rc8480_boot_flash_parts,
- .nr_parts = ARRAY_SIZE(lb88rc8480_boot_flash_parts),
- .width = 1, /* 8 bit bus width */
-};
-
-static struct resource lb88rc8480_boot_flash_resource = {
- .flags = IORESOURCE_MEM,
- .start = LB88RC8480_NOR_BOOT_BASE,
- .end = LB88RC8480_NOR_BOOT_BASE + LB88RC8480_NOR_BOOT_SIZE - 1,
-};
-
-static struct platform_device lb88rc8480_boot_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &lb88rc8480_boot_flash_data,
- },
- .num_resources = 1,
- .resource = &lb88rc8480_boot_flash_resource,
-};
-
-static struct mv643xx_eth_platform_data lb88rc8480_ge0_data = {
- .phy_addr = MV643XX_ETH_PHY_ADDR(1),
- .mac_addr = { 0x00, 0x50, 0x43, 0x11, 0x22, 0x33 },
-};
-
-static void __init lb88rc8480_init(void)
-{
- /*
- * Basic setup. Needs to be called early.
- */
- loki_init();
-
- loki_ge0_init(&lb88rc8480_ge0_data);
- loki_sas_init();
- loki_uart0_init();
- loki_uart1_init();
-
- loki_setup_dev_boot_win(LB88RC8480_FLASH_BOOT_CS_BASE,
- LB88RC8480_FLASH_BOOT_CS_SIZE);
- platform_device_register(&lb88rc8480_boot_flash);
-}
-
-MACHINE_START(LB88RC8480, "Marvell LB88RC8480 Development Board")
- /* Maintainer: Ke Wei <kewei@marvell.com> */
- .boot_params = 0x00000100,
- .init_machine = lb88rc8480_init,
- .map_io = loki_map_io,
- .init_early = loki_init_early,
- .init_irq = loki_init_irq,
- .timer = &loki_timer,
-MACHINE_END
projects / platform / kernel / linux-3.10.git / commitdiff