#include <linux/delay.h>
#include <linux/init.h>
#include <linux/mutex.h>
-#include <linux/amifdreg.h>
-#include <linux/amifd.h>
#include <linux/fs.h>
-#include <linux/blkdev.h>
+#include <linux/blk-mq.h>
#include <linux/elevator.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
* Defines
*/
+/*
+ * CIAAPRA bits (read only)
+ */
+
+#define DSKRDY (0x1<<5) /* disk ready when low */
+#define DSKTRACK0 (0x1<<4) /* head at track zero when low */
+#define DSKPROT (0x1<<3) /* disk protected when low */
+#define DSKCHANGE (0x1<<2) /* low when disk removed */
+
+/*
+ * CIAAPRB bits (read/write)
+ */
+
+#define DSKMOTOR (0x1<<7) /* motor on when low */
+#define DSKSEL3 (0x1<<6) /* select drive 3 when low */
+#define DSKSEL2 (0x1<<5) /* select drive 2 when low */
+#define DSKSEL1 (0x1<<4) /* select drive 1 when low */
+#define DSKSEL0 (0x1<<3) /* select drive 0 when low */
+#define DSKSIDE (0x1<<2) /* side selection: 0 = upper, 1 = lower */
+#define DSKDIREC (0x1<<1) /* step direction: 0=in, 1=out (to trk 0) */
+#define DSKSTEP (0x1) /* pulse low to step head 1 track */
+
+/*
+ * DSKBYTR bits (read only)
+ */
+
+#define DSKBYT (1<<15) /* register contains valid byte when set */
+#define DMAON (1<<14) /* disk DMA enabled */
+#define DISKWRITE (1<<13) /* disk write bit in DSKLEN enabled */
+#define WORDEQUAL (1<<12) /* DSKSYNC register match when true */
+/* bits 7-0 are data */
+
+/*
+ * ADKCON/ADKCONR bits
+ */
+
+#ifndef SETCLR
+#define ADK_SETCLR (1<<15) /* control bit */
+#endif
+#define ADK_PRECOMP1 (1<<14) /* precompensation selection */
+#define ADK_PRECOMP0 (1<<13) /* 00=none, 01=140ns, 10=280ns, 11=500ns */
+#define ADK_MFMPREC (1<<12) /* 0=GCR precomp., 1=MFM precomp. */
+#define ADK_WORDSYNC (1<<10) /* enable DSKSYNC auto DMA */
+#define ADK_MSBSYNC (1<<9) /* when 1, enable sync on MSbit (for GCR) */
+#define ADK_FAST (1<<8) /* bit cell: 0=2us (GCR), 1=1us (MFM) */
+
+/*
+ * DSKLEN bits
+ */
+
+#define DSKLEN_DMAEN (1<<15)
+#define DSKLEN_WRITE (1<<14)
+
+/*
+ * INTENA/INTREQ bits
+ */
+
+#define DSKINDEX (0x1<<4) /* DSKINDEX bit */
+
+/*
+ * Misc
+ */
+
+#define MFM_SYNC 0x4489 /* standard MFM sync value */
+
+/* Values for FD_COMMAND */
+#define FD_RECALIBRATE 0x07 /* move to track 0 */
+#define FD_SEEK 0x0F /* seek track */
+#define FD_READ 0xE6 /* read with MT, MFM, SKip deleted */
+#define FD_WRITE 0xC5 /* write with MT, MFM */
+#define FD_SENSEI 0x08 /* Sense Interrupt Status */
+#define FD_SPECIFY 0x03 /* specify HUT etc */
+#define FD_FORMAT 0x4D /* format one track */
+#define FD_VERSION 0x10 /* get version code */
+#define FD_CONFIGURE 0x13 /* configure FIFO operation */
+#define FD_PERPENDICULAR 0x12 /* perpendicular r/w mode */
+
+#define FD_MAX_UNITS 4 /* Max. Number of drives */
+#define FLOPPY_MAX_SECTORS 22 /* Max. Number of sectors per track */
+
+struct fd_data_type {
+ char *name; /* description of data type */
+ int sects; /* sectors per track */
+ int (*read_fkt)(int); /* read whole track */
+ void (*write_fkt)(int); /* write whole track */
+};
+
+struct fd_drive_type {
+ unsigned long code; /* code returned from drive */
+ char *name; /* description of drive */
+ unsigned int tracks; /* number of tracks */
+ unsigned int heads; /* number of heads */
+ unsigned int read_size; /* raw read size for one track */
+ unsigned int write_size; /* raw write size for one track */
+ unsigned int sect_mult; /* sectors and gap multiplier (HD = 2) */
+ unsigned int precomp1; /* start track for precomp 1 */
+ unsigned int precomp2; /* start track for precomp 2 */
+ unsigned int step_delay; /* time (in ms) for delay after step */
+ unsigned int settle_time; /* time to settle after dir change */
+ unsigned int side_time; /* time needed to change sides */
+};
+
+struct amiga_floppy_struct {
+ struct fd_drive_type *type; /* type of floppy for this unit */
+ struct fd_data_type *dtype; /* type of floppy for this unit */
+ int track; /* current track (-1 == unknown) */
+ unsigned char *trackbuf; /* current track (kmaloc()'d */
+
+ int blocks; /* total # blocks on disk */
+
+ int changed; /* true when not known */
+ int disk; /* disk in drive (-1 == unknown) */
+ int motor; /* true when motor is at speed */
+ int busy; /* true when drive is active */
+ int dirty; /* true when trackbuf is not on disk */
+ int status; /* current error code for unit */
+ struct gendisk *gendisk;
+};
+
/*
* Error codes
*/
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _AMIFD_H
-#define _AMIFD_H
-
-/* Definitions for the Amiga floppy driver */
-
-#include <linux/fd.h>
-
-#define FD_MAX_UNITS 4 /* Max. Number of drives */
-#define FLOPPY_MAX_SECTORS 22 /* Max. Number of sectors per track */
-
-#ifndef ASSEMBLER
-
-struct fd_data_type {
- char *name; /* description of data type */
- int sects; /* sectors per track */
-#ifdef __STDC__
- int (*read_fkt)(int);
- void (*write_fkt)(int);
-#else
- int (*read_fkt)(); /* read whole track */
- void (*write_fkt)(); /* write whole track */
-#endif
-};
-
-/*
-** Floppy type descriptions
-*/
-
-struct fd_drive_type {
- unsigned long code; /* code returned from drive */
- char *name; /* description of drive */
- unsigned int tracks; /* number of tracks */
- unsigned int heads; /* number of heads */
- unsigned int read_size; /* raw read size for one track */
- unsigned int write_size; /* raw write size for one track */
- unsigned int sect_mult; /* sectors and gap multiplier (HD = 2) */
- unsigned int precomp1; /* start track for precomp 1 */
- unsigned int precomp2; /* start track for precomp 2 */
- unsigned int step_delay; /* time (in ms) for delay after step */
- unsigned int settle_time; /* time to settle after dir change */
- unsigned int side_time; /* time needed to change sides */
-};
-
-struct amiga_floppy_struct {
- struct fd_drive_type *type; /* type of floppy for this unit */
- struct fd_data_type *dtype; /* type of floppy for this unit */
- int track; /* current track (-1 == unknown) */
- unsigned char *trackbuf; /* current track (kmaloc()'d */
-
- int blocks; /* total # blocks on disk */
-
- int changed; /* true when not known */
- int disk; /* disk in drive (-1 == unknown) */
- int motor; /* true when motor is at speed */
- int busy; /* true when drive is active */
- int dirty; /* true when trackbuf is not on disk */
- int status; /* current error code for unit */
- struct gendisk *gendisk;
-};
-#endif
-
-#endif
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LINUX_AMIFDREG_H
-#define _LINUX_AMIFDREG_H
-
-/*
-** CIAAPRA bits (read only)
-*/
-
-#define DSKRDY (0x1<<5) /* disk ready when low */
-#define DSKTRACK0 (0x1<<4) /* head at track zero when low */
-#define DSKPROT (0x1<<3) /* disk protected when low */
-#define DSKCHANGE (0x1<<2) /* low when disk removed */
-
-/*
-** CIAAPRB bits (read/write)
-*/
-
-#define DSKMOTOR (0x1<<7) /* motor on when low */
-#define DSKSEL3 (0x1<<6) /* select drive 3 when low */
-#define DSKSEL2 (0x1<<5) /* select drive 2 when low */
-#define DSKSEL1 (0x1<<4) /* select drive 1 when low */
-#define DSKSEL0 (0x1<<3) /* select drive 0 when low */
-#define DSKSIDE (0x1<<2) /* side selection: 0 = upper, 1 = lower */
-#define DSKDIREC (0x1<<1) /* step direction: 0=in, 1=out (to trk 0) */
-#define DSKSTEP (0x1) /* pulse low to step head 1 track */
-
-/*
-** DSKBYTR bits (read only)
-*/
-
-#define DSKBYT (1<<15) /* register contains valid byte when set */
-#define DMAON (1<<14) /* disk DMA enabled */
-#define DISKWRITE (1<<13) /* disk write bit in DSKLEN enabled */
-#define WORDEQUAL (1<<12) /* DSKSYNC register match when true */
-/* bits 7-0 are data */
-
-/*
-** ADKCON/ADKCONR bits
-*/
-
-#ifndef SETCLR
-#define ADK_SETCLR (1<<15) /* control bit */
-#endif
-#define ADK_PRECOMP1 (1<<14) /* precompensation selection */
-#define ADK_PRECOMP0 (1<<13) /* 00=none, 01=140ns, 10=280ns, 11=500ns */
-#define ADK_MFMPREC (1<<12) /* 0=GCR precomp., 1=MFM precomp. */
-#define ADK_WORDSYNC (1<<10) /* enable DSKSYNC auto DMA */
-#define ADK_MSBSYNC (1<<9) /* when 1, enable sync on MSbit (for GCR) */
-#define ADK_FAST (1<<8) /* bit cell: 0=2us (GCR), 1=1us (MFM) */
-
-/*
-** DSKLEN bits
-*/
-
-#define DSKLEN_DMAEN (1<<15)
-#define DSKLEN_WRITE (1<<14)
-
-/*
-** INTENA/INTREQ bits
-*/
-
-#define DSKINDEX (0x1<<4) /* DSKINDEX bit */
-
-/*
-** Misc
-*/
-
-#define MFM_SYNC 0x4489 /* standard MFM sync value */
-
-/* Values for FD_COMMAND */
-#define FD_RECALIBRATE 0x07 /* move to track 0 */
-#define FD_SEEK 0x0F /* seek track */
-#define FD_READ 0xE6 /* read with MT, MFM, SKip deleted */
-#define FD_WRITE 0xC5 /* write with MT, MFM */
-#define FD_SENSEI 0x08 /* Sense Interrupt Status */
-#define FD_SPECIFY 0x03 /* specify HUT etc */
-#define FD_FORMAT 0x4D /* format one track */
-#define FD_VERSION 0x10 /* get version code */
-#define FD_CONFIGURE 0x13 /* configure FIFO operation */
-#define FD_PERPENDICULAR 0x12 /* perpendicular r/w mode */
-
-#endif /* _LINUX_AMIFDREG_H */
projects / platform / kernel / linux-starfive.git / commitdiff