This reverts commit
912f655d78c5d4ad05eac287f23a435924df7144.
This commit introduced a regression that can cause mount hung. The
changes in __ocfs2_find_empty_slot causes that any node with none-zero
node number can grab the slot that was already taken by node 0, so node 1
will access the same journal with node 0, when it try to grab journal
cluster lock, it will hung because it was already acquired by node 0.
It's very easy to reproduce this, in one cluster, mount node 0 first, then
node 1, you will see the following call trace from node 1.
[13148.735424] INFO: task mount.ocfs2:53045 blocked for more than 122 seconds.
[13148.739691] Not tainted 5.15.0-2148.0.4.el8uek.mountracev2.x86_64 #2
[13148.742560] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[13148.745846] task:mount.ocfs2 state:D stack: 0 pid:53045 ppid: 53044 flags:0x00004000
[13148.749354] Call Trace:
[13148.750718] <TASK>
[13148.752019] ? usleep_range+0x90/0x89
[13148.753882] __schedule+0x210/0x567
[13148.755684] schedule+0x44/0xa8
[13148.757270] schedule_timeout+0x106/0x13c
[13148.759273] ? __prepare_to_swait+0x53/0x78
[13148.761218] __wait_for_common+0xae/0x163
[13148.763144] __ocfs2_cluster_lock.constprop.0+0x1d6/0x870 [ocfs2]
[13148.765780] ? ocfs2_inode_lock_full_nested+0x18d/0x398 [ocfs2]
[13148.768312] ocfs2_inode_lock_full_nested+0x18d/0x398 [ocfs2]
[13148.770968] ocfs2_journal_init+0x91/0x340 [ocfs2]
[13148.773202] ocfs2_check_volume+0x39/0x461 [ocfs2]
[13148.775401] ? iput+0x69/0xba
[13148.777047] ocfs2_mount_volume.isra.0.cold+0x40/0x1f5 [ocfs2]
[13148.779646] ocfs2_fill_super+0x54b/0x853 [ocfs2]
[13148.781756] mount_bdev+0x190/0x1b7
[13148.783443] ? ocfs2_remount+0x440/0x440 [ocfs2]
[13148.785634] legacy_get_tree+0x27/0x48
[13148.787466] vfs_get_tree+0x25/0xd0
[13148.789270] do_new_mount+0x18c/0x2d9
[13148.791046] __x64_sys_mount+0x10e/0x142
[13148.792911] do_syscall_64+0x3b/0x89
[13148.794667] entry_SYSCALL_64_after_hwframe+0x170/0x0
[13148.797051] RIP: 0033:0x7f2309f6e26e
[13148.798784] RSP: 002b:
00007ffdcee7d408 EFLAGS:
00000246 ORIG_RAX:
00000000000000a5
[13148.801974] RAX:
ffffffffffffffda RBX:
00007ffdcee7d4a0 RCX:
00007f2309f6e26e
[13148.804815] RDX:
0000559aa762a8ae RSI:
0000559aa939d340 RDI:
0000559aa93a22b0
[13148.807719] RBP:
00007ffdcee7d5b0 R08:
0000559aa93a2290 R09:
00007f230a0b4820
[13148.810659] R10:
0000000000000000 R11:
0000000000000246 R12:
00007ffdcee7d420
[13148.813609] R13:
0000000000000000 R14:
0000559aa939f000 R15:
0000000000000000
[13148.816564] </TASK>
To fix it, we can just fix __ocfs2_find_empty_slot. But original commit
introduced the feature to mount ocfs2 locally even it is cluster based,
that is a very dangerous, it can easily cause serious data corruption,
there is no way to stop other nodes mounting the fs and corrupting it.
Setup ha or other cluster-aware stack is just the cost that we have to
take for avoiding corruption, otherwise we have to do it in kernel.
Link: https://lkml.kernel.org/r/20220603222801.42488-1-junxiao.bi@oracle.com
Fixes:
912f655d78c5("ocfs2: mount shared volume without ha stack")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <heming.zhao@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
OCFS2_MOUNT_JOURNAL_ASYNC_COMMIT = 1 << 15, /* Journal Async Commit */
OCFS2_MOUNT_ERRORS_CONT = 1 << 16, /* Return EIO to the calling process on error */
OCFS2_MOUNT_ERRORS_ROFS = 1 << 17, /* Change filesystem to read-only on error */
- OCFS2_MOUNT_NOCLUSTER = 1 << 18, /* No cluster aware filesystem mount */
};
#define OCFS2_OSB_SOFT_RO 0x0001
static inline int ocfs2_mount_local(struct ocfs2_super *osb)
{
- return ((osb->s_feature_incompat & OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT)
- || (osb->s_mount_opt & OCFS2_MOUNT_NOCLUSTER));
+ return (osb->s_feature_incompat & OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT);
}
static inline int ocfs2_uses_extended_slot_map(struct ocfs2_super *osb)
int i, ret = -ENOSPC;
if ((preferred >= 0) && (preferred < si->si_num_slots)) {
- if (!si->si_slots[preferred].sl_valid ||
- !si->si_slots[preferred].sl_node_num) {
+ if (!si->si_slots[preferred].sl_valid) {
ret = preferred;
goto out;
}
}
for(i = 0; i < si->si_num_slots; i++) {
- if (!si->si_slots[i].sl_valid ||
- !si->si_slots[i].sl_node_num) {
+ if (!si->si_slots[i].sl_valid) {
ret = i;
break;
}
spin_lock(&osb->osb_lock);
ocfs2_update_slot_info(si);
- if (ocfs2_mount_local(osb))
- /* use slot 0 directly in local mode */
- slot = 0;
- else {
- /* search for ourselves first and take the slot if it already
- * exists. Perhaps we need to mark this in a variable for our
- * own journal recovery? Possibly not, though we certainly
- * need to warn to the user */
- slot = __ocfs2_node_num_to_slot(si, osb->node_num);
+ /* search for ourselves first and take the slot if it already
+ * exists. Perhaps we need to mark this in a variable for our
+ * own journal recovery? Possibly not, though we certainly
+ * need to warn to the user */
+ slot = __ocfs2_node_num_to_slot(si, osb->node_num);
+ if (slot < 0) {
+ /* if no slot yet, then just take 1st available
+ * one. */
+ slot = __ocfs2_find_empty_slot(si, osb->preferred_slot);
if (slot < 0) {
- /* if no slot yet, then just take 1st available
- * one. */
- slot = __ocfs2_find_empty_slot(si, osb->preferred_slot);
- if (slot < 0) {
- spin_unlock(&osb->osb_lock);
- mlog(ML_ERROR, "no free slots available!\n");
- status = -EINVAL;
- goto bail;
- }
- } else
- printk(KERN_INFO "ocfs2: Slot %d on device (%s) was "
- "already allocated to this node!\n",
- slot, osb->dev_str);
- }
+ spin_unlock(&osb->osb_lock);
+ mlog(ML_ERROR, "no free slots available!\n");
+ status = -EINVAL;
+ goto bail;
+ }
+ } else
+ printk(KERN_INFO "ocfs2: Slot %d on device (%s) was already "
+ "allocated to this node!\n", slot, osb->dev_str);
ocfs2_set_slot(si, slot, osb->node_num);
osb->slot_num = slot;
Opt_dir_resv_level,
Opt_journal_async_commit,
Opt_err_cont,
- Opt_nocluster,
Opt_err,
};
{Opt_dir_resv_level, "dir_resv_level=%u"},
{Opt_journal_async_commit, "journal_async_commit"},
{Opt_err_cont, "errors=continue"},
- {Opt_nocluster, "nocluster"},
{Opt_err, NULL}
};
goto out;
}
- tmp = OCFS2_MOUNT_NOCLUSTER;
- if ((osb->s_mount_opt & tmp) != (parsed_options.mount_opt & tmp)) {
- ret = -EINVAL;
- mlog(ML_ERROR, "Cannot change nocluster option on remount\n");
- goto out;
- }
-
tmp = OCFS2_MOUNT_HB_LOCAL | OCFS2_MOUNT_HB_GLOBAL |
OCFS2_MOUNT_HB_NONE;
if ((osb->s_mount_opt & tmp) != (parsed_options.mount_opt & tmp)) {
}
if (ocfs2_userspace_stack(osb) &&
- !(osb->s_mount_opt & OCFS2_MOUNT_NOCLUSTER) &&
strncmp(osb->osb_cluster_stack, mopt->cluster_stack,
OCFS2_STACK_LABEL_LEN)) {
mlog(ML_ERROR,
osb->s_mount_opt & OCFS2_MOUNT_DATA_WRITEBACK ? "writeback" :
"ordered");
- if ((osb->s_mount_opt & OCFS2_MOUNT_NOCLUSTER) &&
- !(osb->s_feature_incompat & OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT))
- printk(KERN_NOTICE "ocfs2: The shared device (%s) is mounted "
- "without cluster aware mode.\n", osb->dev_str);
-
atomic_set(&osb->vol_state, VOLUME_MOUNTED);
wake_up(&osb->osb_mount_event);
case Opt_journal_async_commit:
mopt->mount_opt |= OCFS2_MOUNT_JOURNAL_ASYNC_COMMIT;
break;
- case Opt_nocluster:
- mopt->mount_opt |= OCFS2_MOUNT_NOCLUSTER;
- break;
default:
mlog(ML_ERROR,
"Unrecognized mount option \"%s\" "
if (opts & OCFS2_MOUNT_JOURNAL_ASYNC_COMMIT)
seq_printf(s, ",journal_async_commit");
- if (opts & OCFS2_MOUNT_NOCLUSTER)
- seq_printf(s, ",nocluster");
-
return 0;
}