mfd: twl6040: reg_defaults support for regmap
authorPeter Ujfalusi <peter.ujfalusi@ti.com>
Fri, 29 Nov 2013 14:03:45 +0000 (16:03 +0200)
committerLee Jones <lee.jones@linaro.org>
Thu, 19 Dec 2013 17:01:11 +0000 (17:01 +0000)
Add reg_defaults to regmap and at the same time implement proper power
state handling with using regcache_cache_only(), regcache_sync() and
regcache_mark_dirty().

This will make sure that we do not need to do restore operations in child
drivers anymore.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
drivers/mfd/twl6040.c

index 0779d5a..51b6df1 100644 (file)
 #define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
 #define TWL6040_NUM_SUPPLIES   (2)
 
+static struct reg_default twl6040_defaults[] = {
+       { 0x01, 0x4B }, /* REG_ASICID   (ro) */
+       { 0x02, 0x00 }, /* REG_ASICREV  (ro) */
+       { 0x03, 0x00 }, /* REG_INTID    */
+       { 0x04, 0x00 }, /* REG_INTMR    */
+       { 0x05, 0x00 }, /* REG_NCPCTRL  */
+       { 0x06, 0x00 }, /* REG_LDOCTL   */
+       { 0x07, 0x60 }, /* REG_HPPLLCTL */
+       { 0x08, 0x00 }, /* REG_LPPLLCTL */
+       { 0x09, 0x4A }, /* REG_LPPLLDIV */
+       { 0x0A, 0x00 }, /* REG_AMICBCTL */
+       { 0x0B, 0x00 }, /* REG_DMICBCTL */
+       { 0x0C, 0x00 }, /* REG_MICLCTL  */
+       { 0x0D, 0x00 }, /* REG_MICRCTL  */
+       { 0x0E, 0x00 }, /* REG_MICGAIN  */
+       { 0x0F, 0x1B }, /* REG_LINEGAIN */
+       { 0x10, 0x00 }, /* REG_HSLCTL   */
+       { 0x11, 0x00 }, /* REG_HSRCTL   */
+       { 0x12, 0x00 }, /* REG_HSGAIN   */
+       { 0x13, 0x00 }, /* REG_EARCTL   */
+       { 0x14, 0x00 }, /* REG_HFLCTL   */
+       { 0x15, 0x00 }, /* REG_HFLGAIN  */
+       { 0x16, 0x00 }, /* REG_HFRCTL   */
+       { 0x17, 0x00 }, /* REG_HFRGAIN  */
+       { 0x18, 0x00 }, /* REG_VIBCTLL  */
+       { 0x19, 0x00 }, /* REG_VIBDATL  */
+       { 0x1A, 0x00 }, /* REG_VIBCTLR  */
+       { 0x1B, 0x00 }, /* REG_VIBDATR  */
+       { 0x1C, 0x00 }, /* REG_HKCTL1   */
+       { 0x1D, 0x00 }, /* REG_HKCTL2   */
+       { 0x1E, 0x00 }, /* REG_GPOCTL   */
+       { 0x1F, 0x00 }, /* REG_ALB      */
+       { 0x20, 0x00 }, /* REG_DLB      */
+       /* 0x28, REG_TRIM1 */
+       /* 0x29, REG_TRIM2 */
+       /* 0x2A, REG_TRIM3 */
+       /* 0x2B, REG_HSOTRIM */
+       /* 0x2C, REG_HFOTRIM */
+       { 0x2D, 0x08 }, /* REG_ACCCTL   */
+       { 0x2E, 0x00 }, /* REG_STATUS   (ro) */
+};
+
+struct reg_default twl6040_patch[] = {
+       /* Select I2C bus access to dual access registers */
+       { TWL6040_REG_ACCCTL, 0x09 },
+};
+
+
 static bool twl6040_has_vibra(struct device_node *node)
 {
 #ifdef CONFIG_OF
@@ -238,6 +286,9 @@ int twl6040_power(struct twl6040 *twl6040, int on)
                if (twl6040->power_count++)
                        goto out;
 
+               /* Allow writes to the chip */
+               regcache_cache_only(twl6040->regmap, false);
+
                if (gpio_is_valid(twl6040->audpwron)) {
                        /* use automatic power-up sequence */
                        ret = twl6040_power_up_automatic(twl6040);
@@ -253,6 +304,10 @@ int twl6040_power(struct twl6040 *twl6040, int on)
                                goto out;
                        }
                }
+
+               /* Sync with the HW */
+               regcache_sync(twl6040->regmap);
+
                /* Default PLL configuration after power up */
                twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
                twl6040->sysclk = 19200000;
@@ -279,6 +334,11 @@ int twl6040_power(struct twl6040 *twl6040, int on)
                        /* use manual power-down sequence */
                        twl6040_power_down_manual(twl6040);
                }
+
+               /* Set regmap to cache only and mark it as dirty */
+               regcache_cache_only(twl6040->regmap, true);
+               regcache_mark_dirty(twl6040->regmap);
+
                twl6040->sysclk = 0;
                twl6040->mclk = 0;
        }
@@ -490,9 +550,24 @@ static bool twl6040_readable_reg(struct device *dev, unsigned int reg)
 static bool twl6040_volatile_reg(struct device *dev, unsigned int reg)
 {
        switch (reg) {
-       case TWL6040_REG_VIBCTLL:
-       case TWL6040_REG_VIBCTLR:
-       case TWL6040_REG_INTMR:
+       case TWL6040_REG_ASICID:
+       case TWL6040_REG_ASICREV:
+       case TWL6040_REG_INTID:
+       case TWL6040_REG_LPPLLCTL:
+       case TWL6040_REG_HPPLLCTL:
+       case TWL6040_REG_STATUS:
+               return true;
+       default:
+               return false;
+       }
+}
+
+static bool twl6040_writeable_reg(struct device *dev, unsigned int reg)
+{
+       switch (reg) {
+       case TWL6040_REG_ASICID:
+       case TWL6040_REG_ASICREV:
+       case TWL6040_REG_STATUS:
                return false;
        default:
                return true;
@@ -502,10 +577,15 @@ static bool twl6040_volatile_reg(struct device *dev, unsigned int reg)
 static struct regmap_config twl6040_regmap_config = {
        .reg_bits = 8,
        .val_bits = 8,
+
+       .reg_defaults = twl6040_defaults,
+       .num_reg_defaults = ARRAY_SIZE(twl6040_defaults),
+
        .max_register = TWL6040_REG_STATUS, /* 0x2e */
 
        .readable_reg = twl6040_readable_reg,
        .volatile_reg = twl6040_volatile_reg,
+       .writeable_reg = twl6040_writeable_reg,
 
        .cache_type = REGCACHE_RBTREE,
 };
@@ -624,6 +704,8 @@ static int twl6040_probe(struct i2c_client *client,
 
        /* dual-access registers controlled by I2C only */
        twl6040_set_bits(twl6040, TWL6040_REG_ACCCTL, TWL6040_I2CSEL);
+       regmap_register_patch(twl6040->regmap, twl6040_patch,
+                             ARRAY_SIZE(twl6040_patch));
 
        /*
         * The main functionality of twl6040 to provide audio on OMAP4+ systems.
@@ -656,6 +738,10 @@ static int twl6040_probe(struct i2c_client *client,
        cell->name = "twl6040-gpo";
        children++;
 
+       /* The chip is powered down so mark regmap to cache only and dirty */
+       regcache_cache_only(twl6040->regmap, true);
+       regcache_mark_dirty(twl6040->regmap);
+
        ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
                              NULL, 0, NULL);
        if (ret)