drm/panel: add support for rm69299 visionox panel
authorHarigovindan P <harigovi@codeaurora.org>
Wed, 29 Apr 2020 05:45:14 +0000 (11:15 +0530)
committerSam Ravnborg <sam@ravnborg.org>
Wed, 6 May 2020 18:54:47 +0000 (20:54 +0200)
Add support for Visionox rm69299 panel.

Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fix checkpatch warnings, added sentinel ]
Link: https://patchwork.freedesktop.org/patch/msgid/20200421045508.21137-2-harigovi@codeaurora.org
drivers/gpu/drm/panel/Kconfig
drivers/gpu/drm/panel/Makefile
drivers/gpu/drm/panel/panel-visionox-rm69299.c [new file with mode: 0644]

index d56258b..4b6131f 100644 (file)
@@ -444,6 +444,14 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
          Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
          Video Mode panel
 
+config DRM_PANEL_VISIONOX_RM69299
+       tristate "Visionox RM69299"
+       depends on OF
+       depends on DRM_MIPI_DSI
+       help
+         Say Y here if you want to enable support for Visionox
+         RM69299  DSI Video Mode panel.
+
 config DRM_PANEL_XINPENG_XPP055C272
        tristate "Xinpeng XPP055C272 panel driver"
        depends on OF
index 2335a1e..8eac3e6 100644 (file)
@@ -47,4 +47,5 @@ obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
 obj-$(CONFIG_DRM_PANEL_TPO_TPG110) += panel-tpo-tpg110.o
 obj-$(CONFIG_DRM_PANEL_TRULY_NT35597_WQXGA) += panel-truly-nt35597.o
+obj-$(CONFIG_DRM_PANEL_VISIONOX_RM69299) += panel-visionox-rm69299.o
 obj-$(CONFIG_DRM_PANEL_XINPENG_XPP055C272) += panel-xinpeng-xpp055c272.o
diff --git a/drivers/gpu/drm/panel/panel-visionox-rm69299.c b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
new file mode 100644 (file)
index 0000000..25fe8b0
--- /dev/null
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+
+struct visionox_rm69299 {
+       struct drm_panel panel;
+       struct regulator_bulk_data supplies[2];
+       struct gpio_desc *reset_gpio;
+       struct mipi_dsi_device *dsi;
+       bool prepared;
+       bool enabled;
+};
+
+static inline struct visionox_rm69299 *panel_to_ctx(struct drm_panel *panel)
+{
+       return container_of(panel, struct visionox_rm69299, panel);
+}
+
+static int visionox_rm69299_power_on(struct visionox_rm69299 *ctx)
+{
+       int ret;
+
+       ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+       if (ret < 0)
+               return ret;
+
+       /*
+        * Reset sequence of visionox panel requires the panel to be
+        * out of reset for 10ms, followed by being held in reset
+        * for 10ms and then out again
+        */
+       gpiod_set_value(ctx->reset_gpio, 1);
+       usleep_range(10000, 20000);
+       gpiod_set_value(ctx->reset_gpio, 0);
+       usleep_range(10000, 20000);
+       gpiod_set_value(ctx->reset_gpio, 1);
+       usleep_range(10000, 20000);
+
+       return 0;
+}
+
+static int visionox_rm69299_power_off(struct visionox_rm69299 *ctx)
+{
+       gpiod_set_value(ctx->reset_gpio, 0);
+
+       return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+}
+
+static int visionox_rm69299_unprepare(struct drm_panel *panel)
+{
+       struct visionox_rm69299 *ctx = panel_to_ctx(panel);
+       int ret;
+
+       ctx->dsi->mode_flags = 0;
+
+       ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_SET_DISPLAY_OFF, NULL, 0);
+       if (ret < 0)
+               DRM_DEV_ERROR(ctx->panel.dev,
+                             "set_display_off cmd failed ret = %d\n", ret);
+
+       /* 120ms delay required here as per DCS spec */
+       msleep(120);
+
+       ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_ENTER_SLEEP_MODE, NULL, 0);
+       if (ret < 0) {
+               DRM_DEV_ERROR(ctx->panel.dev,
+                             "enter_sleep cmd failed ret = %d\n", ret);
+       }
+
+       ret = visionox_rm69299_power_off(ctx);
+
+       ctx->prepared = false;
+       return ret;
+}
+
+static int visionox_rm69299_prepare(struct drm_panel *panel)
+{
+       struct visionox_rm69299 *ctx = panel_to_ctx(panel);
+       int ret;
+
+       if (ctx->prepared)
+               return 0;
+
+       ret = visionox_rm69299_power_on(ctx);
+       if (ret < 0)
+               return ret;
+
+       ctx->dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+       ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0xfe, 0x00 }, 2);
+       if (ret < 0) {
+               DRM_DEV_ERROR(ctx->panel.dev,
+                             "cmd set tx 0 failed, ret = %d\n", ret);
+               goto power_off;
+       }
+
+       ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0xc2, 0x08 }, 2);
+       if (ret < 0) {
+               DRM_DEV_ERROR(ctx->panel.dev,
+                             "cmd set tx 1 failed, ret = %d\n", ret);
+               goto power_off;
+       }
+
+       ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0x35, 0x00 }, 2);
+       if (ret < 0) {
+               DRM_DEV_ERROR(ctx->panel.dev,
+                             "cmd set tx 2 failed, ret = %d\n", ret);
+               goto power_off;
+       }
+
+       ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0x51, 0xff }, 2);
+       if (ret < 0) {
+               DRM_DEV_ERROR(ctx->panel.dev,
+                             "cmd set tx 3 failed, ret = %d\n", ret);
+               goto power_off;
+       }
+
+       ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0);
+       if (ret < 0) {
+               DRM_DEV_ERROR(ctx->panel.dev,
+                             "exit_sleep_mode cmd failed ret = %d\n", ret);
+               goto power_off;
+       }
+
+       /* Per DSI spec wait 120ms after sending exit sleep DCS command */
+       msleep(120);
+
+       ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0);
+       if (ret < 0) {
+               DRM_DEV_ERROR(ctx->panel.dev,
+                             "set_display_on cmd failed ret = %d\n", ret);
+               goto power_off;
+       }
+
+       /* Per DSI spec wait 120ms after sending set_display_on DCS command */
+       msleep(120);
+
+       ctx->prepared = true;
+
+       return 0;
+
+power_off:
+       return ret;
+}
+
+static const struct drm_display_mode visionox_rm69299_1080x2248_60hz = {
+       .name = "1080x2248",
+       .clock = 158695,
+       .hdisplay = 1080,
+       .hsync_start = 1080 + 26,
+       .hsync_end = 1080 + 26 + 2,
+       .htotal = 1080 + 26 + 2 + 36,
+       .vdisplay = 2248,
+       .vsync_start = 2248 + 56,
+       .vsync_end = 2248 + 56 + 4,
+       .vtotal = 2248 + 56 + 4 + 4,
+       .vrefresh = 60,
+       .flags = 0,
+};
+
+static int visionox_rm69299_get_modes(struct drm_panel *panel,
+                                     struct drm_connector *connector)
+{
+       struct visionox_rm69299 *ctx = panel_to_ctx(panel);
+       struct drm_display_mode *mode;
+
+       mode = drm_mode_create(connector->dev);
+       if (!mode) {
+               DRM_DEV_ERROR(ctx->panel.dev,
+                             "failed to create a new display mode\n");
+               return 0;
+       }
+
+       connector->display_info.width_mm = 74;
+       connector->display_info.height_mm = 131;
+       drm_mode_copy(mode, &visionox_rm69299_1080x2248_60hz);
+       mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+       drm_mode_probed_add(connector, mode);
+
+       return 1;
+}
+
+static const struct drm_panel_funcs visionox_rm69299_drm_funcs = {
+       .unprepare = visionox_rm69299_unprepare,
+       .prepare = visionox_rm69299_prepare,
+       .get_modes = visionox_rm69299_get_modes,
+};
+
+static int visionox_rm69299_probe(struct mipi_dsi_device *dsi)
+{
+       struct device *dev = &dsi->dev;
+       struct visionox_rm69299 *ctx;
+       int ret;
+
+       ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+       if (!ctx)
+               return -ENOMEM;
+
+       mipi_dsi_set_drvdata(dsi, ctx);
+
+       ctx->panel.dev = dev;
+       ctx->dsi = dsi;
+
+       ctx->supplies[0].supply = "vdda";
+       ctx->supplies[1].supply = "vdd3p3";
+
+       ret = devm_regulator_bulk_get(ctx->panel.dev, ARRAY_SIZE(ctx->supplies),
+                                     ctx->supplies);
+       if (ret < 0)
+               return ret;
+
+       ctx->reset_gpio = devm_gpiod_get(ctx->panel.dev,
+                                        "reset", GPIOD_OUT_LOW);
+       if (IS_ERR(ctx->reset_gpio)) {
+               DRM_DEV_ERROR(dev, "cannot get reset gpio %ld\n",
+                             PTR_ERR(ctx->reset_gpio));
+               return PTR_ERR(ctx->reset_gpio);
+       }
+
+       drm_panel_init(&ctx->panel, dev, &visionox_rm69299_drm_funcs,
+                      DRM_MODE_CONNECTOR_DSI);
+       ctx->panel.dev = dev;
+       ctx->panel.funcs = &visionox_rm69299_drm_funcs;
+       drm_panel_add(&ctx->panel);
+
+       dsi->lanes = 4;
+       dsi->format = MIPI_DSI_FMT_RGB888;
+       dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_LPM |
+                         MIPI_DSI_CLOCK_NON_CONTINUOUS;
+       ret = mipi_dsi_attach(dsi);
+       if (ret < 0) {
+               DRM_DEV_ERROR(dev, "dsi attach failed ret = %d\n", ret);
+               goto err_dsi_attach;
+       }
+
+       ret = regulator_set_load(ctx->supplies[0].consumer, 32000);
+       if (ret) {
+               DRM_DEV_ERROR(dev,
+                             "regulator set load failed for vdda supply ret = %d\n",
+                             ret);
+               goto err_set_load;
+       }
+
+       ret = regulator_set_load(ctx->supplies[1].consumer, 13200);
+       if (ret) {
+               DRM_DEV_ERROR(dev,
+                             "regulator set load failed for vdd3p3 supply ret = %d\n",
+                             ret);
+               goto err_set_load;
+       }
+
+       return 0;
+
+err_set_load:
+       mipi_dsi_detach(dsi);
+err_dsi_attach:
+       drm_panel_remove(&ctx->panel);
+       return ret;
+}
+
+static int visionox_rm69299_remove(struct mipi_dsi_device *dsi)
+{
+       struct visionox_rm69299 *ctx = mipi_dsi_get_drvdata(dsi);
+
+       mipi_dsi_detach(ctx->dsi);
+       mipi_dsi_device_unregister(ctx->dsi);
+
+       drm_panel_remove(&ctx->panel);
+       return 0;
+}
+
+static const struct of_device_id visionox_rm69299_of_match[] = {
+       { .compatible = "visionox,rm69299-1080p-display", },
+       { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, visionox_rm69299_of_match);
+
+static struct mipi_dsi_driver visionox_rm69299_driver = {
+       .driver = {
+               .name = "panel-visionox-rm69299",
+               .of_match_table = visionox_rm69299_of_match,
+       },
+       .probe = visionox_rm69299_probe,
+       .remove = visionox_rm69299_remove,
+};
+module_mipi_dsi_driver(visionox_rm69299_driver);
+
+MODULE_DESCRIPTION("Visionox RM69299 DSI Panel Driver");