brcm: adds support for BCM43341 wifi

brcmfmac: Disable power management

Disable wireless power saving in the brcmfmac WLAN driver. This is a
temporary measure until the connectivity loss resulting from power
saving is resolved.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
brcmfmac: Use original country code as a fallback

Commit 73345fd212980d2e28a5c6d83801c903bd773680:

    brcmfmac: Configure country code using device specific settings

prevents region codes from working on devices that lack a region code
translation table. In the event of an absent table, preserve the old
behaviour of using the provided code as-is.

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
brcmfmac: Plug memory leak in brcmf_fill_bss_param

See: https://github.com/raspberrypi/linux/issues/1471

Signed-off-by: Phil Elwell <phil@raspberrypi.org>
brcmfmac: do not use internal roaming engine by default

Some evidence of curing disconnects with this disabled, so make it a default.
Can be overridden with module parameter roamoff=0
See: http://projectable.me/optimize-my-pi-wi-fi/

brcmfmac: Change stop_ap sequence

Patch from Broadcom/Cypress to resolve a customer error

Signed-off-by: Phil Elwell <phil@raspberrypi.org>

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 6f3faaf..72822c8 100644 (file)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -2697,6 +2697,8 @@ brcmf_cfg80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *ndev,
         * preference in cfg struct to apply this to
         * FW later while initializing the dongle
         */
+       pr_info("power management disabled\n");
+       enabled = false;
        cfg->pwr_save = enabled;
        if (!check_vif_up(ifp->vif)) {
 
@@ -6770,12 +6772,18 @@ static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2],
        struct brcmfmac_pd_cc *country_codes;
        struct brcmfmac_pd_cc_entry *cc;
        s32 found_index;
+       char ccode[BRCMF_COUNTRY_BUF_SZ];
+       int rev;
        int i;
 
+       memcpy(ccode, alpha2, sizeof(ccode));
+       rev = -1;
+
        country_codes = drvr->settings->country_codes;
        if (!country_codes) {
-               brcmf_dbg(TRACE, "No country codes configured for device\n");
-               return -EINVAL;
+               brcmf_dbg(TRACE, "No country codes configured for device"
+                                " - use requested value\n");
+               goto use_input_value;
        }
 
        if ((alpha2[0] == ccreq->country_abbrev[0]) &&
@@ -6799,10 +6807,14 @@ static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2],
                brcmf_dbg(TRACE, "No country code match found\n");
                return -EINVAL;
        }
-       memset(ccreq, 0, sizeof(*ccreq));
-       ccreq->rev = cpu_to_le32(country_codes->table[found_index].rev);
-       memcpy(ccreq->ccode, country_codes->table[found_index].cc,
+       rev = country_codes->table[found_index].rev;
+       memcpy(ccode, country_codes->table[found_index].cc,
               BRCMF_COUNTRY_BUF_SZ);
+
+use_input_value:
+       memset(ccreq, 0, sizeof(*ccreq));
+       ccreq->rev = cpu_to_le32(rev);
+       memcpy(ccreq->ccode, ccode, sizeof(ccode));
        ccreq->country_abbrev[0] = alpha2[0];
        ccreq->country_abbrev[1] = alpha2[1];
        ccreq->country_abbrev[2] = 0;

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
index 27893af..d238d85 100644 (file)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
@@ -70,7 +70,7 @@ static int brcmf_fcmode;
 module_param_named(fcmode, brcmf_fcmode, int, 0);
 MODULE_PARM_DESC(fcmode, "Mode of firmware signalled flow control");
 
-static int brcmf_roamoff;
+static int brcmf_roamoff = 1;
 module_param_named(roamoff, brcmf_roamoff, int, 0400);
 MODULE_PARM_DESC(roamoff, "Do not use internal roaming engine");
 

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index a907d7b..7efe5df 100644 (file)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -608,6 +608,7 @@ BRCMF_FW_DEF(4329, "brcmfmac4329-sdio");
 BRCMF_FW_DEF(4330, "brcmfmac4330-sdio");
 BRCMF_FW_DEF(4334, "brcmfmac4334-sdio");
 BRCMF_FW_DEF(43340, "brcmfmac43340-sdio");
+BRCMF_FW_DEF(43341, "brcmfmac43341-sdio");
 BRCMF_FW_DEF(4335, "brcmfmac4335-sdio");
 BRCMF_FW_DEF(43362, "brcmfmac43362-sdio");
 BRCMF_FW_DEF(4339, "brcmfmac4339-sdio");
@@ -628,7 +629,7 @@ static const struct brcmf_firmware_mapping brcmf_sdio_fwnames[] = {
        BRCMF_FW_ENTRY(BRCM_CC_4330_CHIP_ID, 0xFFFFFFFF, 4330),
        BRCMF_FW_ENTRY(BRCM_CC_4334_CHIP_ID, 0xFFFFFFFF, 4334),
        BRCMF_FW_ENTRY(BRCM_CC_43340_CHIP_ID, 0xFFFFFFFF, 43340),
-       BRCMF_FW_ENTRY(BRCM_CC_43341_CHIP_ID, 0xFFFFFFFF, 43340),
+       BRCMF_FW_ENTRY(BRCM_CC_43341_CHIP_ID, 0xFFFFFFFF, 43341),
        BRCMF_FW_ENTRY(BRCM_CC_4335_CHIP_ID, 0xFFFFFFFF, 4335),
        BRCMF_FW_ENTRY(BRCM_CC_43362_CHIP_ID, 0xFFFFFFFE, 43362),
        BRCMF_FW_ENTRY(BRCM_CC_4339_CHIP_ID, 0xFFFFFFFF, 4339),