board: stm32mp1: add support of nor1 device in dfu command

Add support of mtd backend for nor1 when this device is present on the
board, on STM32MP157C-EV1 for example, as the support of several MTD
spi-nor instance are now supported with commit b7f060565e31 ("mtd:
spi-nor: allow registering multiple MTDs when DM is enabled").

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

diff --git a/board/st/common/stm32mp_dfu.c b/board/st/common/stm32mp_dfu.c
index 00d1fb8..a3f0da5 100644 (file)
--- a/board/st/common/stm32mp_dfu.c
+++ b/board/st/common/stm32mp_dfu.c
@@ -132,6 +132,10 @@ void set_dfu_alt_info(char *interface, char *devstr)
                        mtd = get_mtd_device_nm("nor0");
                        if (!IS_ERR_OR_NULL(mtd))
                                board_get_alt_info_mtd(mtd, buf);
+
+                       mtd = get_mtd_device_nm("nor1");
+                       if (!IS_ERR_OR_NULL(mtd))
+                               board_get_alt_info_mtd(mtd, buf);
                }
 
                mtd = get_mtd_device_nm("nand0");

diff --git a/doc/board/st/stm32mp1.rst b/doc/board/st/stm32mp1.rst
index 42bb941..0c5d3a9 100644 (file)
--- a/doc/board/st/stm32mp1.rst
+++ b/doc/board/st/stm32mp1.rst
@@ -645,16 +645,18 @@ On EV1 board, booting from SD card, without OP-TEE_::
   dev: eMMC alt: 15 name: mmc1_rootfs layout: RAW_ADDR
   dev: eMMC alt: 16 name: mmc1_userfs layout: RAW_ADDR
   dev: MTD alt: 17 name: nor0 layout: RAW_ADDR
-  dev: MTD alt: 18 name: nand0 layout: RAW_ADDR
-  dev: VIRT alt: 19 name: OTP layout: RAW_ADDR
-  dev: VIRT alt: 20 name: PMIC layout: RAW_ADDR
+  dev: MTD alt: 18 name: nor1 layout: RAW_ADDR
+  dev: MTD alt: 19 name: nand0 layout: RAW_ADDR
+  dev: VIRT alt: 20 name: OTP layout: RAW_ADDR
+  dev: VIRT alt: 21 name: PMIC layout: RAW_ADDR
 
 All the supported device are exported for dfu-util tool::
 
   $> dfu-util -l
-  Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=20, name="PMIC", serial="002700333338511934383330"
-  Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=19, name="OTP", serial="002700333338511934383330"
-  Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=18, name="nand0", serial="002700333338511934383330"
+  Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=21, name="PMIC", serial="002700333338511934383330"
+  Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=20, name="OTP", serial="002700333338511934383330"
+  Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=19, name="nand0", serial="002700333338511934383330"
+  Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=18, name="nor1", serial="002700333338511934383330"
   Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=17, name="nor0", serial="002700333338511934383330"
   Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=16, name="mmc1_userfs", serial="002700333338511934383330"
   Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=15, name="mmc1_rootfs", serial="002700333338511934383330"
@@ -705,12 +707,12 @@ You can update the boot device:
 When the board is booting for nor0 or nand0,
 only the MTD partition on the boot devices are available, for example:
 
-- NOR (nor0 = alt 20) & NAND (nand0 = alt 26) ::
+- NOR (nor0 = alt 20, nor1 = alt 26) & NAND (nand0 = alt 27) :
 
   $> dfu-util -d 0483:5720 -a 21 -D tf-a-stm32mp157c-ev1.stm32
   $> dfu-util -d 0483:5720 -a 22 -D tf-a-stm32mp157c-ev1.stm32
   $> dfu-util -d 0483:5720 -a 23 -D fip-stm32mp157c-ev1.bin
-  $> dfu-util -d 0483:5720 -a 27 -D st-image-weston-openstlinux-weston-stm32mp1_nand_4_256_multivolume.ubi
+  $> dfu-util -d 0483:5720 -a 28 -D st-image-weston-openstlinux-weston-stm32mp1_nand_4_256_multivolume.ubi
 
 - NAND (nand0 = alt 21)::