MIPS: OCTEON: octeon-usb: add all register offsets

Glue code uses a mix of offset and absolute address register
definition. Define all of them as offsets and use them
consistently.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

diff --git a/arch/mips/cavium-octeon/octeon-usb.c b/arch/mips/cavium-octeon/octeon-usb.c
index 28677c6..4d22eaa 100644 (file)
--- a/arch/mips/cavium-octeon/octeon-usb.c
+++ b/arch/mips/cavium-octeon/octeon-usb.c
@@ -17,6 +17,19 @@
 
 #include <asm/octeon/octeon.h>
 
+#define USBDRD_UCTL_CTL                                0x00
+#define USBDRD_UCTL_BIST_STATUS                        0x08
+#define USBDRD_UCTL_SPARE0                     0x10
+#define USBDRD_UCTL_INTSTAT                    0x30
+#define USBDRD_UCTL_PORT_CFG_HS(port)          (0x40 + (0x20 * port))
+#define USBDRD_UCTL_PORT_CFG_SS(port)          (0x48 + (0x20 * port))
+#define USBDRD_UCTL_PORT_CR_DBG_CFG(port)      (0x50 + (0x20 * port))
+#define USBDRD_UCTL_PORT_CR_DBG_STATUS(port)   (0x58 + (0x20 * port))
+#define USBDRD_UCTL_HOST_CFG                   0xe0
+#define USBDRD_UCTL_SHIM_CFG                   0xe8
+#define USBDRD_UCTL_ECC                                0xf0
+#define USBDRD_UCTL_SPARE1                     0xf8
+
 /* USB Control Register */
 union cvm_usbdrd_uctl_ctl {
        uint64_t u64;
@@ -227,7 +240,6 @@ static uint8_t clk_div[OCTEON_H_CLKDIV_SEL] = {1, 2, 4, 6, 8, 16, 24, 32};
 
 static int dwc3_octeon_config_power(struct device *dev, u64 base)
 {
-#define UCTL_HOST_CFG  0xe0
        union cvm_usbdrd_uctl_host_cfg uctl_host_cfg;
        union cvmx_gpio_bit_cfgx gpio_bit;
        uint32_t gpio_pwr[3];
@@ -268,16 +280,16 @@ static int dwc3_octeon_config_power(struct device *dev, u64 base)
                }
 
                /* Enable XHCI power control and set if active high or low. */
-               uctl_host_cfg.u64 = cvmx_read_csr(base + UCTL_HOST_CFG);
+               uctl_host_cfg.u64 = cvmx_read_csr(base + USBDRD_UCTL_HOST_CFG);
                uctl_host_cfg.s.ppc_en = 1;
                uctl_host_cfg.s.ppc_active_high_en = !power_active_low;
-               cvmx_write_csr(base + UCTL_HOST_CFG, uctl_host_cfg.u64);
+               cvmx_write_csr(base + USBDRD_UCTL_HOST_CFG, uctl_host_cfg.u64);
        } else {
                /* Disable XHCI power control and set if active high. */
-               uctl_host_cfg.u64 = cvmx_read_csr(base + UCTL_HOST_CFG);
+               uctl_host_cfg.u64 = cvmx_read_csr(base + USBDRD_UCTL_HOST_CFG);
                uctl_host_cfg.s.ppc_en = 0;
                uctl_host_cfg.s.ppc_active_high_en = 0;
-               cvmx_write_csr(base + UCTL_HOST_CFG, uctl_host_cfg.u64);
+               cvmx_write_csr(base + USBDRD_UCTL_HOST_CFG, uctl_host_cfg.u64);
                dev_info(dev, "power control disabled\n");
        }
        return 0;
@@ -464,10 +476,9 @@ static int dwc3_octeon_clocks_start(struct device *dev, u64 base)
 
 static void __init dwc3_octeon_set_endian_mode(u64 base)
 {
-#define UCTL_SHIM_CFG  0xe8
        union cvm_usbdrd_uctl_shim_cfg shim_cfg;
 
-       shim_cfg.u64 = cvmx_read_csr(base + UCTL_SHIM_CFG);
+       shim_cfg.u64 = cvmx_read_csr(base + USBDRD_UCTL_SHIM_CFG);
 #ifdef __BIG_ENDIAN
        shim_cfg.s.dma_endian_mode = 1;
        shim_cfg.s.csr_endian_mode = 1;
@@ -475,20 +486,16 @@ static void __init dwc3_octeon_set_endian_mode(u64 base)
        shim_cfg.s.dma_endian_mode = 0;
        shim_cfg.s.csr_endian_mode = 0;
 #endif
-       cvmx_write_csr(base + UCTL_SHIM_CFG, shim_cfg.u64);
+       cvmx_write_csr(base + USBDRD_UCTL_SHIM_CFG, shim_cfg.u64);
 }
 
-#define CVMX_USBDRDX_UCTL_CTL(index)                           \
-               (CVMX_ADD_IO_SEG(0x0001180068000000ull) +       \
-               ((index & 1) * 0x1000000ull))
 static void __init dwc3_octeon_phy_reset(u64 base)
 {
        union cvm_usbdrd_uctl_ctl uctl_ctl;
-       int index = (base >> 24) & 1;
 
-       uctl_ctl.u64 = cvmx_read_csr(CVMX_USBDRDX_UCTL_CTL(index));
+       uctl_ctl.u64 = cvmx_read_csr(base + USBDRD_UCTL_CTL);
        uctl_ctl.s.uphy_rst = 0;
-       cvmx_write_csr(CVMX_USBDRDX_UCTL_CTL(index), uctl_ctl.u64);
+       cvmx_write_csr(base + USBDRD_UCTL_CTL, uctl_ctl.u64);
 }
 
 static int __init dwc3_octeon_device_init(void)