.need_dc_calib = true,
.need_temp_offset_calib = true,
.led_mode = IWL_LED_RF_STATE,
- .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6005_2abg_cfg = {
.need_dc_calib = true,
.need_temp_offset_calib = true,
.led_mode = IWL_LED_RF_STATE,
- .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6005_2bg_cfg = {
.need_dc_calib = true,
.need_temp_offset_calib = true,
.led_mode = IWL_LED_RF_STATE,
- .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6030_2agn_cfg = {
.adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
- .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6030_2abg_cfg = {
.adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
- .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6030_2bgn_cfg = {
.adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
- .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6030_2bg_cfg = {
.adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
- .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl1030_bgn_cfg = {
.adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
- .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl1030_bg_cfg = {
.adv_pm = true,
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
- .use_new_eeprom_reading = true,
};
/*
.ht_params = &iwl6000_ht_params,
.need_dc_calib = true,
.led_mode = IWL_LED_RF_STATE,
- .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl6050_2abg_cfg = {
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.rx_with_siso_diversity = true,
- .use_new_eeprom_reading = true,
};
struct iwl_cfg iwl130_bg_cfg = {
/* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */
.scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A,
.rx_with_siso_diversity = true,
- .use_new_eeprom_reading = true,
};
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
#include "iwl-agn.h"
#include "iwl-io.h"
-/************************** EEPROM BANDS ****************************
- *
- * The iwl_eeprom_band definitions below provide the mapping from the
- * EEPROM contents to the specific channel number supported for each
- * band.
- *
- * For example, iwl_priv->eeprom.band_3_channels[4] from the band_3
- * definition below maps to physical channel 42 in the 5.2GHz spectrum.
- * The specific geography and calibration information for that channel
- * is contained in the eeprom map itself.
- *
- * During init, we copy the eeprom information and channel map
- * information into priv->channel_info_24/52 and priv->channel_map_24/52
- *
- * channel_map_24/52 provides the index in the channel_info array for a
- * given channel. We have to have two separate maps as there is channel
- * overlap with the 2.4GHz and 5.2GHz spectrum as seen in band_1 and
- * band_2
- *
- * A value of 0xff stored in the channel_map indicates that the channel
- * is not supported by the hardware at all.
- *
- * A value of 0xfe in the channel_map indicates that the channel is not
- * valid for Tx with the current hardware. This means that
- * while the system can tune and receive on a given channel, it may not
- * be able to associate or transmit any frames on that
- * channel. There is no corresponding channel information for that
- * entry.
- *
- *********************************************************************/
-
-/**
- * struct iwl_txpwr_section: eeprom section information
- * @offset: indirect address into eeprom image
- * @count: number of "struct iwl_eeprom_enhanced_txpwr" in this section
- * @band: band type for the section
- * @is_common - true: common section, false: channel section
- * @is_cck - true: cck section, false: not cck section
- * @is_ht_40 - true: all channel in the section are HT40 channel,
- * false: legacy or HT 20 MHz
- * ignore if it is common section
- * @iwl_eeprom_section_channel: channel array in the section,
- * ignore if common section
- */
-struct iwl_txpwr_section {
- u32 offset;
- u8 count;
- enum ieee80211_band band;
- bool is_common;
- bool is_cck;
- bool is_ht40;
- u8 iwl_eeprom_section_channel[EEPROM_MAX_TXPOWER_SECTION_ELEMENTS];
-};
-
-/**
- * section 1 - 3 are regulatory tx power apply to all channels based on
- * modulation: CCK, OFDM
- * Band: 2.4GHz, 5.2GHz
- * section 4 - 10 are regulatory tx power apply to specified channels
- * For example:
- * 1L - Channel 1 Legacy
- * 1HT - Channel 1 HT
- * (1,+1) - Channel 1 HT40 "_above_"
- *
- * Section 1: all CCK channels
- * Section 2: all 2.4 GHz OFDM (Legacy, HT and HT40) channels
- * Section 3: all 5.2 GHz OFDM (Legacy, HT and HT40) channels
- * Section 4: 2.4 GHz 20MHz channels: 1L, 1HT, 2L, 2HT, 10L, 10HT, 11L, 11HT
- * Section 5: 2.4 GHz 40MHz channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1)
- * Section 6: 5.2 GHz 20MHz channels: 36L, 64L, 100L, 36HT, 64HT, 100HT
- * Section 7: 5.2 GHz 40MHz channels: (36,+1) (60,+1) (100,+1)
- * Section 8: 2.4 GHz channel: 13L, 13HT
- * Section 9: 2.4 GHz channel: 140L, 140HT
- * Section 10: 2.4 GHz 40MHz channels: (132,+1) (44,+1)
- *
- */
-static const struct iwl_txpwr_section enhinfo[] = {
- { EEPROM_LB_CCK_20_COMMON, 1, IEEE80211_BAND_2GHZ, true, true, false },
- { EEPROM_LB_OFDM_COMMON, 3, IEEE80211_BAND_2GHZ, true, false, false },
- { EEPROM_HB_OFDM_COMMON, 3, IEEE80211_BAND_5GHZ, true, false, false },
- { EEPROM_LB_OFDM_20_BAND, 8, IEEE80211_BAND_2GHZ,
- false, false, false,
- {1, 1, 2, 2, 10, 10, 11, 11 } },
- { EEPROM_LB_OFDM_HT40_BAND, 5, IEEE80211_BAND_2GHZ,
- false, false, true,
- { 1, 2, 6, 7, 9 } },
- { EEPROM_HB_OFDM_20_BAND, 6, IEEE80211_BAND_5GHZ,
- false, false, false,
- { 36, 64, 100, 36, 64, 100 } },
- { EEPROM_HB_OFDM_HT40_BAND, 3, IEEE80211_BAND_5GHZ,
- false, false, true,
- { 36, 60, 100 } },
- { EEPROM_LB_OFDM_20_CHANNEL_13, 2, IEEE80211_BAND_2GHZ,
- false, false, false,
- { 13, 13 } },
- { EEPROM_HB_OFDM_20_CHANNEL_140, 2, IEEE80211_BAND_5GHZ,
- false, false, false,
- { 140, 140 } },
- { EEPROM_HB_OFDM_HT40_BAND_1, 2, IEEE80211_BAND_5GHZ,
- false, false, true,
- { 132, 44 } },
-};
-
/******************************************************************************
*
* EEPROM related functions
return (max_txpower_avg & 0x01) + (max_txpower_avg >> 1);
}
-/**
- * iwl_update_common_txpower: update channel tx power
- * update tx power per band based on EEPROM enhanced tx power info.
- */
-static s8 iwl_update_common_txpower(struct iwl_priv *priv,
- struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
- int section, int element, s8 *max_txpower_in_half_dbm)
-{
- struct iwl_channel_info *ch_info;
- int ch;
- bool is_ht40 = false;
- s8 max_txpower_avg; /* (dBm) */
-
- /* it is common section, contain all type (Legacy, HT and HT40)
- * based on the element in the section to determine
- * is it HT 40 or not
- */
- if (element == EEPROM_TXPOWER_COMMON_HT40_INDEX)
- is_ht40 = true;
- max_txpower_avg =
- iwl_get_max_txpower_avg(priv, enhanced_txpower,
- element, max_txpower_in_half_dbm);
-
- ch_info = priv->channel_info;
-
- for (ch = 0; ch < priv->channel_count; ch++) {
- /* find matching band and update tx power if needed */
- if ((ch_info->band == enhinfo[section].band) &&
- (ch_info->max_power_avg < max_txpower_avg) &&
- (!is_ht40)) {
- /* Update regulatory-based run-time data */
- ch_info->max_power_avg = ch_info->curr_txpow =
- max_txpower_avg;
- ch_info->scan_power = max_txpower_avg;
- }
- if ((ch_info->band == enhinfo[section].band) && is_ht40 &&
- (ch_info->ht40_max_power_avg < max_txpower_avg)) {
- /* Update regulatory-based run-time data */
- ch_info->ht40_max_power_avg = max_txpower_avg;
- }
- ch_info++;
- }
- return max_txpower_avg;
-}
-
-/**
- * iwl_update_channel_txpower: update channel tx power
- * update channel tx power based on EEPROM enhanced tx power info.
- */
-static s8 iwl_update_channel_txpower(struct iwl_priv *priv,
- struct iwl_eeprom_enhanced_txpwr *enhanced_txpower,
- int section, int element, s8 *max_txpower_in_half_dbm)
-{
- struct iwl_channel_info *ch_info;
- int ch;
- u8 channel;
- s8 max_txpower_avg; /* (dBm) */
-
- channel = enhinfo[section].iwl_eeprom_section_channel[element];
- max_txpower_avg =
- iwl_get_max_txpower_avg(priv, enhanced_txpower,
- element, max_txpower_in_half_dbm);
-
- ch_info = priv->channel_info;
- for (ch = 0; ch < priv->channel_count; ch++) {
- /* find matching channel and update tx power if needed */
- if (ch_info->channel == channel) {
- if ((ch_info->max_power_avg < max_txpower_avg) &&
- (!enhinfo[section].is_ht40)) {
- /* Update regulatory-based run-time data */
- ch_info->max_power_avg = max_txpower_avg;
- ch_info->curr_txpow = max_txpower_avg;
- ch_info->scan_power = max_txpower_avg;
- }
- if ((enhinfo[section].is_ht40) &&
- (ch_info->ht40_max_power_avg < max_txpower_avg)) {
- /* Update regulatory-based run-time data */
- ch_info->ht40_max_power_avg = max_txpower_avg;
- }
- break;
- }
- ch_info++;
- }
- return max_txpower_avg;
-}
-
-/**
- * iwlcore_eeprom_enhanced_txpower: process enhanced tx power info
- */
-static void iwlcore_eeprom_enhanced_txpower_old(struct iwl_priv *priv)
-{
- int eeprom_section_count = 0;
- int section, element;
- struct iwl_eeprom_enhanced_txpwr *enhanced_txpower;
- u32 offset;
- s8 max_txpower_avg; /* (dBm) */
- s8 max_txpower_in_half_dbm; /* (half-dBm) */
-
- /* Loop through all the sections
- * adjust bands and channel's max tx power
- * Set the tx_power_user_lmt to the highest power
- * supported by any channels and chains
- */
- for (section = 0; section < ARRAY_SIZE(enhinfo); section++) {
- eeprom_section_count = enhinfo[section].count;
- offset = enhinfo[section].offset;
- enhanced_txpower = (struct iwl_eeprom_enhanced_txpwr *)
- iwl_eeprom_query_addr(priv, offset);
-
- /*
- * check for valid entry -
- * different version of EEPROM might contain different set
- * of enhanced tx power table
- * always check for valid entry before process
- * the information
- */
- if (!(enhanced_txpower->flags || enhanced_txpower->channel) ||
- enhanced_txpower->delta_20_in_40)
- continue;
-
- for (element = 0; element < eeprom_section_count; element++) {
- if (enhinfo[section].is_common)
- max_txpower_avg =
- iwl_update_common_txpower(priv,
- enhanced_txpower, section,
- element,
- &max_txpower_in_half_dbm);
- else
- max_txpower_avg =
- iwl_update_channel_txpower(priv,
- enhanced_txpower, section,
- element,
- &max_txpower_in_half_dbm);
-
- /* Update the tx_power_user_lmt to the highest power
- * supported by any channel */
- if (max_txpower_avg > priv->tx_power_user_lmt)
- priv->tx_power_user_lmt = max_txpower_avg;
-
- /*
- * Update the tx_power_lmt_in_half_dbm to
- * the highest power supported by any channel
- */
- if (max_txpower_in_half_dbm >
- priv->tx_power_lmt_in_half_dbm)
- priv->tx_power_lmt_in_half_dbm =
- max_txpower_in_half_dbm;
- }
- }
-}
-
static void
iwlcore_eeprom_enh_txp_read_element(struct iwl_priv *priv,
struct iwl_eeprom_enhanced_txpwr *txp,
#define EEPROM_TXP_ENTRY_LEN sizeof(struct iwl_eeprom_enhanced_txpwr)
#define EEPROM_TXP_SZ_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT_SIZE)
-static void iwlcore_eeprom_enhanced_txpower_new(struct iwl_priv *priv)
+void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
{
struct iwl_eeprom_enhanced_txpwr *txp_array, *txp;
int idx, entries;
iwlcore_eeprom_enh_txp_read_element(priv, txp, max_txp_avg);
}
}
-
-void iwlcore_eeprom_enhanced_txpower(struct iwl_priv *priv)
-{
- if (priv->cfg->use_new_eeprom_reading)
- iwlcore_eeprom_enhanced_txpower_new(priv);
- else
- iwlcore_eeprom_enhanced_txpower_old(priv);
-}
#define EEPROM_6000_REG_BAND_24_HT40_CHANNELS ((0x80)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */
-/* 6000 and up regulatory tx power - indirect access */
-/* max. elements per section */
-#define EEPROM_MAX_TXPOWER_SECTION_ELEMENTS (8)
-#define EEPROM_TXPOWER_COMMON_HT40_INDEX (2)
-
-/**
- * Partition the enhanced tx power portion of eeprom image into
- * 10 sections based on band, modulation, frequency and channel
- *
- * Section 1: all CCK channels
- * Section 2: all 2.4 GHz OFDM (Legacy, HT and HT40 ) channels
- * Section 3: all 5.2 GHz OFDM (Legacy, HT and HT40) channels
- * Section 4: 2.4 GHz 20MHz channels: 1, 2, 10, 11. Both Legacy and HT
- * Section 5: 2.4 GHz 40MHz channels: 1, 2, 6, 7, 9, (_above_)
- * Section 6: 5.2 GHz 20MHz channels: 36, 64, 100, both Legacy and HT
- * Section 7: 5.2 GHz 40MHz channels: 36, 60, 100 (_above_)
- * Section 8: 2.4 GHz channel 13, Both Legacy and HT
- * Section 9: 2.4 GHz channel 140, Both Legacy and HT
- * Section 10: 2.4 GHz 40MHz channels: 132, 44 (_above_)
- */
-/* 2.4 GHz band: CCK */
-#define EEPROM_LB_CCK_20_COMMON ((0xA8)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 8 bytes */
-/* 2.4 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
-#define EEPROM_LB_OFDM_COMMON ((0xB0)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
-/* 5.2 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
-#define EEPROM_HB_OFDM_COMMON ((0xC8)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
-/* 2.4GHz band channels:
- * 1Legacy, 1HT, 2Legacy, 2HT, 10Legacy, 10HT, 11Legacy, 11HT */
-#define EEPROM_LB_OFDM_20_BAND ((0xE0)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 64 bytes */
-/* 2.4 GHz band HT40 channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1) */
-#define EEPROM_LB_OFDM_HT40_BAND ((0x120)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 40 bytes */
-/* 5.2GHz band channels: 36Legacy, 36HT, 64Legacy, 64HT, 100Legacy, 100HT */
-#define EEPROM_HB_OFDM_20_BAND ((0x148)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 48 bytes */
-/* 5.2 GHz band HT40 channels: (36,+1) (60,+1) (100,+1) */
-#define EEPROM_HB_OFDM_HT40_BAND ((0x178)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
-/* 2.4 GHz band, channnel 13: Legacy, HT */
-#define EEPROM_LB_OFDM_20_CHANNEL_13 ((0x190)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */
-/* 5.2 GHz band, channnel 140: Legacy, HT */
-#define EEPROM_HB_OFDM_20_CHANNEL_140 ((0x1A0)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */
-/* 5.2 GHz band, HT40 channnels (132,+1) (44,+1) */
-#define EEPROM_HB_OFDM_HT40_BAND_1 ((0x1B0)\
- | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */
-
-
/* 5050 Specific */
#define EEPROM_5050_TX_POWER_VERSION (4)
#define EEPROM_5050_EEPROM_VERSION (0x21E)
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / commitdiff