{
struct ata_port *ap = qc->ap;
struct ata_host_set *host_set = ap->host_set;
- struct ata_device *dev = qc->dev;
u8 host_stat = 0, drv_stat;
unsigned long flags;
DPRINTK("ENTER\n");
- /* FIXME: doesn't this conflict with timeout handling? */
- if (qc->dev->class == ATA_DEV_ATAPI && qc->scsicmd) {
- struct scsi_cmnd *cmd = qc->scsicmd;
-
- if (!(cmd->eh_eflags & SCSI_EH_CANCEL_CMD)) {
-
- /* finish completing original command */
- spin_lock_irqsave(&host_set->lock, flags);
- __ata_qc_complete(qc);
- spin_unlock_irqrestore(&host_set->lock, flags);
-
- atapi_request_sense(ap, dev, cmd);
-
- cmd->result = (CHECK_CONDITION << 1) | (DID_OK << 16);
- scsi_finish_command(cmd);
-
- goto out;
- }
- }
-
spin_lock_irqsave(&host_set->lock, flags);
/* hack alert! We cannot use the supplied completion
spin_unlock_irqrestore(&host_set->lock, flags);
-out:
DPRINTK("EXIT\n");
}
done(cmd);
}
-void atapi_request_sense(struct ata_port *ap, struct ata_device *dev,
- struct scsi_cmnd *cmd)
+static int atapi_sense_complete(struct ata_queued_cmd *qc,unsigned int err_mask)
{
- DECLARE_COMPLETION(wait);
- struct ata_queued_cmd *qc;
- unsigned long flags;
- int rc;
+ if (err_mask && ((err_mask & AC_ERR_DEV) == 0))
+ /* FIXME: not quite right; we don't want the
+ * translation of taskfile registers into
+ * a sense descriptors, since that's only
+ * correct for ATA, not ATAPI
+ */
+ ata_gen_ata_desc_sense(qc);
- DPRINTK("ATAPI request sense\n");
+ qc->scsidone(qc->scsicmd);
+ return 0;
+}
- qc = ata_qc_new_init(ap, dev);
- BUG_ON(qc == NULL);
+/* is it pointless to prefer PIO for "safety reasons"? */
+static inline int ata_pio_use_silly(struct ata_port *ap)
+{
+ return (ap->flags & ATA_FLAG_PIO_DMA);
+}
+
+static void atapi_request_sense(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+ struct scsi_cmnd *cmd = qc->scsicmd;
+
+ DPRINTK("ATAPI request sense\n");
/* FIXME: is this needed? */
memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer));
+ ap->ops->tf_read(ap, &qc->tf);
+
+ /* fill these in, for the case where they are -not- overwritten */
+ cmd->sense_buffer[0] = 0x70;
+ cmd->sense_buffer[2] = qc->tf.feature >> 4;
+
+ ata_qc_reinit(qc);
+
ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer));
qc->dma_dir = DMA_FROM_DEVICE;
qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
qc->tf.command = ATA_CMD_PACKET;
- qc->tf.protocol = ATA_PROT_ATAPI;
- qc->tf.lbam = (8 * 1024) & 0xff;
- qc->tf.lbah = (8 * 1024) >> 8;
+ if (ata_pio_use_silly(ap)) {
+ qc->tf.protocol = ATA_PROT_ATAPI_DMA;
+ qc->tf.feature |= ATAPI_PKT_DMA;
+ } else {
+ qc->tf.protocol = ATA_PROT_ATAPI;
+ qc->tf.lbam = (8 * 1024) & 0xff;
+ qc->tf.lbah = (8 * 1024) >> 8;
+ }
qc->nbytes = SCSI_SENSE_BUFFERSIZE;
- qc->waiting = &wait;
- qc->complete_fn = ata_qc_complete_noop;
+ qc->complete_fn = atapi_sense_complete;
- spin_lock_irqsave(&ap->host_set->lock, flags);
- rc = ata_qc_issue(qc);
- spin_unlock_irqrestore(&ap->host_set->lock, flags);
-
- if (rc)
- ata_port_disable(ap);
- else
- wait_for_completion(&wait);
+ if (ata_qc_issue(qc))
+ ata_qc_complete(qc, AC_ERR_OTHER);
DPRINTK("EXIT\n");
}
VPRINTK("ENTER, err_mask 0x%X\n", err_mask);
if (unlikely(err_mask & AC_ERR_DEV)) {
- DPRINTK("request check condition\n");
-
- /* FIXME: command completion with check condition
- * but no sense causes the error handler to run,
- * which then issues REQUEST SENSE, fills in the sense
- * buffer, and completes the command (for the second
- * time). We need to issue REQUEST SENSE some other
- * way, to avoid completing the command twice.
- */
cmd->result = SAM_STAT_CHECK_CONDITION;
-
- qc->scsidone(cmd);
-
+ atapi_request_sense(qc);
return 1;
}