echo Processing \"d10v\"...
fi
-d10v_files="ChangeLog config.sub configure.in"
-
-if ( echo $* | grep keep\-d10v > /dev/null ) ; then
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Keeping d10v stuff in $i
- fi
- fi
- done
-else
- for i in * ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Removing traces of \"d10v\" from $i...
- fi
- cp $i new
- sed '/start\-sanitize\-d10v/,/end-\sanitize\-d10v/d' < $i > new
- if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
- if [ -n "${verbose}" ] ; then
- echo Caching $i in .Recover...
- fi
- mv $i .Recover
- fi
- mv new $i
- fi
- done
-fi
-
if [ -n "${verbose}" ] ; then
echo Processing \"d30v\"...
fi
* config.sub (basic_machine): added mips16 configuration
-start-sanitize-d10v
Sat Nov 23 19:26:22 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* config.sub: Handle d10v-unknown.
-end-sanitize-d10v
start-sanitize-v850
Sat Nov 23 14:23:01 1996 Gavin Koch <gavin@cygnus.com>
* config.sub: Handle mn10200 and mn10300.
-start-sanitize-d10v
Tue Nov 19 16:35:14 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* configure.in (d10v-*): Do not build librx.
-end-sanitize-d10v
Mon Nov 18 13:28:41 1996 Jeffrey A Law (law@cygnus.com)
* configure.in (mn10300): Build everything except gdb & libgloss.
* configure.in: You can now configure GDB for the v850.
end-sanitize-v850
-start-sanitize-d10v
Tue Sep 24 19:05:12 1996 Stan Shebs <shebs@andros.cygnus.com>
* configure.in (noconfigdirs): Don't configure any C++ dirs
if targeting D10V.
-end-sanitize-d10v
Tue Sep 17 12:15:31 1996 Ian Lance Taylor <ian@cygnus.com>
* config.sub: Recognize mips64vr5000.
* config.guess (i[345]86): Ditto.
-start-sanitize-d10v
Mon Aug 26 18:34:42 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* configure.in (noconfigdirs): Removed gdb for D10V.
-end-sanitize-d10v
start-sanitize-v850
Thu Aug 22 17:13:52 1996 Jeffrey A Law (law@cygnus.com)
* mpw-config.in: Generate Mac include for elf/dwarf2.h.
-start-sanitize-d10v
Tue Jul 23 10:47:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* configure.in (d10v-*-*): Remove ld from $noconfigdirs.
-end-sanitize-d10v
Mon Jul 22 13:28:51 1996 Brendan Kehoe <brendan@lisa.cygnus.com>
* configure.in (native_only): Add prms.
* Makefile.in (GAS_SUPPORT_DIRS): Add make-all.com and setup.com.
(BINUTILS_SUPPORT_DIRS): Likewise.
-start-sanitize-d10v
Thu Jul 18 12:55:40 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* configure.in (d10v-*-*): Don't configure ld or gdb until the
* configure.in (d10v-*-*): New target.
-end-sanitize-d10v
Mon Jul 15 11:53:00 1996 Jeffrey A Law (law@cygnus.com)
* config.guess (HP 9000/811): Recognize this as a PA1.1
* configure.in (mips-sgi-irix6*): Use mh-irix6 instead of mh-irix5.
-start-sanitize-d10v
Mon Jul 1 13:31:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* config.sub (basic_machine): Recognize d10v as a valid processor.
-end-sanitize-d10v
Fri Jun 28 12:14:35 1996 Stan Shebs <shebs@andros.cygnus.com>
\f
Local Variables:
-mode: indented-text
+mode: change-log
left-margin: 8
-fill-column: 74
+fill-column: 76
version-control: never
End:
done
fi
-d10v_files="ChangeLog ChangeLog.2 Makefile.in archures.c reloc.c targets.c config.bfd configure.in configure bfd-in2.h elf.c libbfd.h"
-if ( echo $* | grep keep\-d10v > /dev/null ) ; then
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Keeping d10v stuff in $i
- fi
- fi
- done
-else
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Removing traces of \"d10v\" from $i...
- fi
- cp $i new
- sed '/start\-sanitize\-d10v/,/end-\sanitize\-d10v/d' < $i > new
- if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
- if [ -n "${verbose}" ] ; then
- echo Caching $i in .Recover...
- fi
- mv $i .Recover
- fi
- mv new $i
- fi
- done
-fi
-
d30v_files="ChangeLog ChangeLog.2 Makefile.in archures.c reloc.c targets.c config.bfd configure.in configure bfd-in2.h elf.c libbfd.h"
if ( echo $* | grep keep\-d30v > /dev/null ) ; then
for i in $d30v_files ; do
* elf32-mn10300.c: Rough cut at relocs for the mn10300.
-start-sanitize-d10v
Wed Nov 13 08:12:38 1996 Jeffrey A Law (law@cygnus.com)
* Makefile.in (elf32-d10v.o): Don't depend on elf/d10v.h
anymore.
-end-sanitize-d10v
Tue Nov 12 13:30:00 1996 Dawn Perchik <dawn@cygnus.com>
* filemode.c: Include sysdep.h.
complain_overflow_unsigned.
end-sanitize-m32r
-start-sanitize-d10v
Tue Oct 29 12:53:46 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* elf32-d10v.c (elf_d10v_howto_table): Don't complain on
overflows for R_D10V_16 and R_D10V_18.
-end-sanitize-d10v
Tue Oct 29 13:23:53 1996 Ian Lance Taylor <ian@cygnus.com>
* ieee.c (ieee_write_section_part): Use LMA rather than VMA.
(case R_V850_HI16_S): Likewise.
end-sanitize-v850
-start-sanitize-d10v
Fri Sep 6 17:04:39 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* elf32-d10v.c (elf_d10v_howto_table): Modify the size of R_D10V_16
and R_D10V_18 to be 1 (word).
-end-sanitize-d10v
Thu Sep 5 15:23:08 1996 Ian Lance Taylor <ian@cygnus.com>
* stabs.c (_bfd_link_section_stabs): If the output_section field
(elf_i386_info_to_howto_rel): Check that the reloc type is valid.
(elf_i386_relocate_section): Likewise.
-start-sanitize-d10v
Tue Aug 6 12:54:56 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* elf32-d10v.c (elf_d10v_howto_table): Added R_D10V_32.
-end-sanitize-d10v
Mon Aug 5 13:42:41 1996 Ian Lance Taylor <ian@cygnus.com>
* elf.c (_bfd_elf_make_section_from_shdr): For a loadable section,
memory position separately from the file position, and use it to
compute the alignment adjustment.
-start-sanitize-d10v
Tue Jul 23 10:43:31 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* elf32-d10v.c (elf_d10v_howto_table): Changed all relocs to "long"
and fixed mask on R_D10V_10_PCREL_L.
-end-sanitize-d10v
Mon Jul 22 15:30:30 1996 Ian Lance Taylor <ian@cygnus.com>
* elf64-mips.c: Include "aout/ar.h".
* coff-ppc.c: Redid debug scheme - numerous fprintf's gone.
Also removed most abort calls, in favor of using bfd reporting.
-start-sanitize-d10v
Wed Jul 17 14:51:52 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* Makefile.in (ALL_MACHINES): Add cpu-d10v.o.
* reloc.c (BFD_RELOC_D10V_10_PCREL_R, BFD_RELOC_D10V_10_PCREL_L,
BFD_RELOC_D10V_18, BFD_RELOC_D10V_18_PCREL): Define.
* targets.c (bfd_elf32_d10v_vec): New vector.
-end-sanitize-d10v
Wed Jul 17 10:58:55 1996 Kim Knuttila <krk@cygnus.com>
\f
Local Variables:
-mode: indented-text
+mode: change-log
left-margin: 8
fill-column: 74
version-control: never
bfd_arch_powerpc, /* PowerPC */
bfd_arch_rs6000, /* IBM RS/6000 */
bfd_arch_hppa, /* HP PA RISC */
- /* start-sanitize-d10v */
bfd_arch_d10v, /* Mitsubishi D10V */
- /* end-sanitize-d10v */
/* start-sanitize-d30v */
bfd_arch_d30v, /* Mitsubishi D30V */
/* end-sanitize-d30v */
BFD_RELOC_ARC_B26,
/* end-sanitize-arc */
-/* start-sanitize-d10v */
-
/* Mitsubishi D10V relocs.
This is a 10-bit reloc with the right 2 bits
assumed to be 0. */
/* This is an 18-bit reloc with the right 2 bits
assumed to be 0. */
BFD_RELOC_D10V_18_PCREL,
-/* end-sanitize-d10v */
/* start-sanitize-d30v */
case bfd_arch_sh:
i_ehdrp->e_machine = EM_SH;
break;
-/* start-sanitize-d10v */
case bfd_arch_d10v:
i_ehdrp->e_machine = EM_CYGNUS_D10V;
break;
-/* end-sanitize-d10v */
/* start-sanitize-d30v */
case bfd_arch_d30v:
i_ehdrp->e_machine = EM_CYGNUS_D30V;
"BFD_RELOC_ARC_B26",
/* end-sanitize-arc */
-/* start-sanitize-d10v */
"BFD_RELOC_D10V_10_PCREL_R",
"BFD_RELOC_D10V_10_PCREL_L",
"BFD_RELOC_D10V_18",
"BFD_RELOC_D10V_18_PCREL",
-/* end-sanitize-d10v */
/* start-sanitize-d30v */
"BFD_RELOC_D30V_6",
{* end-sanitize-arc *}
COMMENT
-{* start-sanitize-d10v *}
ENUM
BFD_RELOC_D10V_10_PCREL_R
ENUMDOC
This is an 18-bit reloc with the right 2 bits
assumed to be 0.
COMMENT
-{* end-sanitize-d10v *}
COMMENT
{* start-sanitize-d30v *}
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss"
;;
-# start-sanitize-d10v
d10v-*-*)
noconfigdirs="$noconfigdirs target-librx target-libg++ target-libstdc++ target-libio target-libgloss"
;;
-# end-sanitize-d10v
# start-sanitize-d30v
d30v-*-*)
noconfigdirs="$noconfigdirs sim tcl tk expect gcc gdb newlib ld target-librx target-libg++ target-libstdc++ target-libio target-libgloss"
fi
-d10v_files="ChangeLog configure.in configure Makefile.in"
-if ( echo $* | grep keep\-d10v > /dev/null ) ; then
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Keeping d10v stuff in $i
- fi
- fi
- done
-else
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Removing traces of \"d10v\" from $i...
- fi
- cp $i new
- sed '/start\-sanitize\-d10v/,/end-\sanitize\-d10v/d' < $i > new
- if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
- if [ -n "${verbose}" ] ; then
- echo Caching $i in .Recover...
- fi
- mv $i .Recover
- fi
- mv new $i
- fi
- done
-fi
-
v850_files="ChangeLog configure.in configure Makefile.in write.c"
if ( echo $* | grep keep\-v850 > /dev/null ) ; then
for i in $v850_files ; do
(s_space): Set mri_pending_align if an odd number of bytes were
output.
-start-sanitize-d10v
Wed Jan 29 15:31:12 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.h (md_do_align): Add this hook to call
* config/tc-d10v.c (find_opcode): Correctly calculate
branch displacement when .aligns are present.
-end-sanitize-d10v
Wed Jan 29 09:42:11 1997 Jeffrey A Law (law@cygnus.com)
* config/tc-mn10200.c (md_relax_table): Define.
* mpw-make.sed: Use NewFolderRecursive for installation.
-start-sanitize-d10v
Wed Dec 18 16:00:42 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c (do_assemble): Correct previous bug fix.
* config/tc-d10v.c (md_assemble): Fix bug which caused
second instruction in a line to be case sensitize. PR11312
-end-sanitize-d10v
Wed Dec 18 10:08:46 1996 Jeffrey A Law (law@cygnus.com)
* config/tc-mn10200.c (mn10200_insert_operand): Don't
BFD_RELOC_24_PLT_PCREL relocation.
(md_apply_fix3): Support BFD_RELOC_24_PLT_PCREL.
-start-sanitize-d10v
Tue Dec 10 13:51:55 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c (write_2_short): Remove code that called
parallel_ok() when the programmer specified parallel instructions.
-end-sanitize-d10v
Tue Dec 10 12:23:19 1996 Jeffrey A Law (law@cygnus.com)
* config/tc-mn10300.c (md_assemble): Update to handle endianness
* config/tc-mn10300.c: Fix various gcc -Wall warnings.
Remove '$' prefixing for registers.
-start-sanitize-d10v
Fri Dec 6 00:55:48 1996 Martin <hunt@cygnus.com>
* config/tc-d10v.c (md_assemble): Check to see if prev_seg
* config/tc-d10v.h (d10v_cleanup): Change prototype.
-end-sanitize-d10v
Thu Dec 5 11:03:31 1996 Ian Lance Taylor <ian@cygnus.com>
* write.c (fixup_segment): Don't discard the symbol for a PC
relative fixup to an absolute symbol.
-start-sanitize-d10v
Wed Dec 4 15:42:41 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c (md_assemble, d10v_cleanup): Fix bug
with multiple sections.
-end-sanitize-d10v
Wed Dec 4 13:00:07 1996 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c (md_longopts): Rename mips-16 to mips16, and
(md_assemble): Create fixups as needed.
(md_apply_fix3): Gut. It shouldn't ever get called anymore.
-start-sanitize-d10v
Tue Nov 19 17:48:06 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-d10v.c (parallel_ok): When automatically converting
serial ops to parallel, do not consider a branch as the first
instruction.
-end-sanitize-d10v
Tue Nov 19 13:35:22 1996 Jeffrey A Law (law@cygnus.com)
* config/tc-mn10300.c (md_assemble): Handle MN10300_OPERAND_REG_LIST.
via PARAMS.
(check_operand): Likewise.
-start-sanitize-d10v
Mon Nov 18 15:22:28 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-d10v.c (parallel_ok): Branch and link instructions
* doc/c-d10v.texi: Add info on @word modifier.
-end-sanitize-d10v
Wed Nov 6 13:46:07 1996 Jeffrey A Law (law@cygnus.com)
* config/tc-mn10300.c (mn10300_insert_operand): MN10300_OPERAND_SPLIT
do any fixups.
end-sanitize-v850
-start-sanitize-d10v
Mon Oct 28 10:48:40 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.h (md_cleanup): New function. This is needed to
write out any buffered instructions when a ".end" is found.
-end-sanitize-d10v
Mon Oct 28 10:43:45 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* read.c (read_a_source_file): New hook md_cleanup().
differently for movea & sst/sld insns.
end-sanitize-v850
-start-sanitize-d10v
Tue Oct 22 17:09:32 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-d10v.c (parallel_ok): Don't allow illegal combinations
of instructions.
-end-sanitize-d10v
Tue Oct 22 11:28:39 1996 Ian Lance Taylor <ian@cygnus.com>
* obj.h (struct format_ops): Add frob_file_after_relocs field.
* read.c (float_cons): Call md_flush_pending_output if it is
defined.
-start-sanitize-d10v
Tue Sep 24 12:22:18 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c (md_operand): Created. Allows operands to
start with '#'.
* config/tc-d10v.h (md_operand): Undefined.
-end-sanitize-d10v
Mon Sep 23 12:13:18 1996 Ian Lance Taylor <ian@cygnus.com>
* config/tc-m68k.c (add_fix): Treat a width of '3' like 'B'.
instruction field. Add code to generate shorter sequences for
constants with a single contiguous seqeuence of ones.
-start-sanitize-d10v
Fri Sep 6 17:07:12 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c (d10v_dot_word): New function to support
(md_apply_fix3): Cleanup and changes to support correct sizes
for 16 and 18-bit relocs.
-end-sanitize-d10v
Fri Sep 6 16:00:29 1996 Doug Evans <dje@canuck.cygnus.com>
* configure.in (sparc-*-aout): Set `em'.
* config/tc-mips.c (load_register): Remove unnecessary code that
was causing the high 32bits of 64bit constants to be lost.
-start-sanitize-d10v
Tue Sep 3 13:52:56 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c: Added changes to support function
pointers and "@word" syntax.
-end-sanitize-d10v
start-sanitize-v850
Tue Sep 3 11:57:18 1996 Jeffrey A Law (law@cygnus.com)
* read.c (emit_expr): Fix conversion of byte count to BFD reloc
code.
-start-sanitize-d10v
Fri Aug 30 14:47:38 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c (find_opcode): Fix problem with calculating
branch sizes in across sections.
-end-sanitize-d10v
start-sanitize-v850
Fri Aug 30 00:44:13 1996 Jeffrey A Law (law@cygnus.com)
table marker.
end-sanitize-v850
-start-sanitize-d10v
Wed Aug 28 19:20:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c (find_opcode): Fix a bug which could generate
the wrong opcode for cases like st2w where there are many forms
of the same instruction.
-end-sanitize-d10v
Tue Aug 27 13:53:22 1996 Ian Lance Taylor <ian@cygnus.com>
* expr.c (operand): If md_parse_name is defined, call it before
* config/tc-hppa.c (tc_gen_reloc): Add new argument to
hppa_gen_reloc_type call.
-start-sanitize-d10v
Mon Aug 26 18:24:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c: Fixed ".word". Fixed problem with range checking
* config/tc-d10v.c (parallel_ok): Fix bug in parallel
checking code.
-end-sanitize-d10v
Mon Aug 26 14:38:22 1996 Ian Lance Taylor <ian@cygnus.com>
* ecoff.c (init_file): Initialize fMerge to 1.
(ecoff_directive_loc): Clear fMerge field of current file.
(ecoff_generate_asm_lineno): Likewise.
-start-sanitize-d10v
Fri Aug 23 11:40:47 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* doc/c-d10v.texi: Fix typo.
-end-sanitize-d10v
start-sanitize-v850
Fri Aug 23 10:41:32 1996 Jeffrey A Law (law@cygnus.com)
* ecoff.c (ecoff_directive_endef): Avoid a division by zero error
if an array dimension is not known.
-start-sanitize-d10v
Thu Aug 22 10:50:00 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c: Fix a reloc bug caused by my last change.
* doc/c-d10v.texi: Cleanup.
-end-sanitize-d10v
start-sanitize-v850
Tue Aug 20 15:15:16 1996 J.T. Conklin <jtc@hippo.cygnus.com>
* configure.in (v850-*-elf): New target.
end-sanitize-v850
-start-sanitize-d10v
Wed Aug 21 15:50:54 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* doc/c-d10v.texi: New file.
* config/tc-d10v.c: All references to defined symbols should
now use the optimal instruction. .float and .double now work.
-end-sanitize-d10v
Mon Aug 19 14:41:36 1996 Ian Lance Taylor <ian@cygnus.com>
* config/obj-coff.c (fixup_segment): Adjust PC relative reloc by
* mpw-config.in: Add wildcards for config matching, add mips-*-*
case, forward-include bfd/elf-bfd.h.
-start-sanitize-d10v
Thu Aug 15 13:24:30 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c: Add additional information to the opcode
table to help determinine which instructions can be done
in parallel.
-end-sanitize-d10v
Thu Aug 15 17:01:31 1996 James G. Smith <jsmith@cygnus.co.uk>
* config/tc-arm.c: Major changes to add Thumb support, with lots
* config/tc-mips.h (BYTE_ORDER): Don't define. No longer used.
-start-sanitize-d10v
Fri Aug 9 17:48:28 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c: Fix problem with relocs.
-end-sanitize-d10v
Fri Aug 9 14:16:14 1996 Ian Lance Taylor <ian@cygnus.com>
* config/tc-sh.c (sh_do_align): If not BFD_ASSEMBLER, always align
as_fatal. Change the error message slightly. Set howto to a
non-NULL value in order to keep going.
-start-sanitize-d10v
Tue Aug 6 12:58:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c: Added code to support 32-bit fixups for stabs.
-end-sanitize-d10v
Tue Aug 6 11:15:26 1996 Jeffrey A Law (law@cygnus.com)
* config/tc-h8300.c (get_specific): New operand "size" derived
* config/tc-hppa.c: Revert yesterday's changes.
-start-sanitize-d10v
Wed Jul 31 14:46:11 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c: Disable range checking on 16-bit values.
-end-sanitize-d10v
Wed Jul 31 16:27:19 1996 Ian Lance Taylor <ian@cygnus.com>
* config/tc-m68k.c (m68k_ip): Set ok_arch for every instruction,
not just the ones that don't match.
-start-sanitize-d10v
Wed Jul 31 11:45:15 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c: Fixed bugs in short relocs and range checking.
-end-sanitize-d10v
Wed Jul 31 15:41:42 1996 James G. Smith <jsmith@cygnus.co.uk>
* config/tc-arm.c: Changed INSN_SIZE to variable insn_size, as
* config/tc-sparc.c (md_pseudo_table): Add 2byte, 4byte, and 8byte
pseudo-ops.
-start-sanitize-d10v
Fri Jul 26 11:43:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c: Added lots of error checking. Added hacks
to support accumulator shifts.
-end-sanitize-d10v
Fri Jul 26 11:56:08 1996 Ian Lance Taylor <ian@cygnus.com>
* symbols.c (S_SET_EXTERNAL): Let .weak override.
(S_CLEAR_EXTERNAL): Likewise.
(S_SET_WEAK): Remove error; just let .weak override.
-start-sanitize-d10v
Thu Jul 25 15:22:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c (md_assemble): Now handles multiline
(d10v_insert_operand): Now works correctly for either container.
* config/tc-d10v.h (d10v_cleanup): Declare.
-end-sanitize-d10v
Mon Jul 22 14:01:33 1996 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c (tc_gen_reloc): BFD_RELOC_PCREL_HI16_S and
* config/tc-m68k.c (m68k_ip): Use the correct length when
allocating space for the unsupported architecture error message.
-start-sanitize-d10v
Thu Jul 18 12:57:10 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* configure.in (d10v-*-*): Allow d10v-*-*, don't require d10v-*-elf*.
* config/tc-d10v.h: New file.
* configure (d10v-*-elf): New target.
* configure.in (d10v-*-elf): New target.
-end-sanitize-d10v
Fri Jul 12 20:54:19 1996 Michael Meissner <meissner@tiktok.cygnus.com>
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.10
+# Generated automatically using autoconf version 2.12
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
# Initialize some other variables.
subdirs=
MFLAGS= MAKEFLAGS=
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
ac_prev=
for ac_option
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.10"
+ echo "configure generated by autoconf version 2.12"
exit 0 ;;
-with-* | --with-*)
done
# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+# Only set these to C if already set. These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -rf conftest* confdefs.h
ac_cpp='$CPP $CPPFLAGS'
ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
# Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:611: checking host system type" >&5
host_alias=$host
case "$host_alias" in
esac
host=`$ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:632: checking target system type" >&5
target_alias=$target
case "$target_alias" in
esac
target=`$ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:650: checking build system type" >&5
build_alias=$build
case "$build_alias" in
esac
build=`$ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$build" 1>&6
test "$host_alias" != "$target_alias" &&
arm-*-riscix*) fmt=aout ;;
arm-*-pe) fmt=coff targ=armcoff em=pe ;;
-# start-sanitize-d10v
d10v-*-*) fmt=elf bfd_gas=yes ;;
-# end-sanitize-d10v
# start-sanitize-d30v
d30v-*-*) fmt=elf bfd_gas=yes ;;
# end-sanitize-d30v
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1396: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1425: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
+echo "configure:1473: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+cat > conftest.$ac_ext <<EOF
+#line 1483 "configure"
+#include "confdefs.h"
+main(){return(0);}
+EOF
+if { (eval echo configure:1487: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ ac_cv_prog_cc_works=yes
+ # If we can't run a trivial program, we are probably using a cross compiler.
+ if (./conftest; exit) 2>/dev/null; then
+ ac_cv_prog_cc_cross=no
+ else
+ ac_cv_prog_cc_cross=yes
+ fi
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ ac_cv_prog_cc_works=no
+fi
+rm -fr conftest*
+
+echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
+if test $ac_cv_prog_cc_works = no; then
+ { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
+fi
+echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
+echo "configure:1507: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
+cross_compiling=$ac_cv_prog_cc_cross
+
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:1512: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1472: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1521: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
fi
echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
if test $ac_cv_prog_gcc = yes; then
GCC=yes
- if test "${CFLAGS+set}" != set; then
- echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-if eval "test \"`echo '$''{'ac_cv_prog_gcc_g'+set}'`\" = set"; then
+ ac_test_CFLAGS="${CFLAGS+set}"
+ ac_save_CFLAGS="$CFLAGS"
+ CFLAGS=
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1536: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo 'void f(){}' > conftest.c
if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
- ac_cv_prog_gcc_g=yes
+ ac_cv_prog_cc_g=yes
else
- ac_cv_prog_gcc_g=no
+ ac_cv_prog_cc_g=no
fi
rm -f conftest*
fi
-echo "$ac_t""$ac_cv_prog_gcc_g" 1>&6
- if test $ac_cv_prog_gcc_g = yes; then
- CFLAGS="-g -O"
- else
- CFLAGS="-O"
- fi
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+ if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+ elif test $ac_cv_prog_cc_g = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-O2"
fi
else
GCC=
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:1574: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
# Account for people who put trailing slashes in PATH elements.
case "$ac_dir/" in
;;
esac
done
- IFS="$ac_save_ifs"
+ IFS="$ac_save_IFS"
fi
if test "${ac_cv_path_install+set}" = set; then
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:1625: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1584 "configure"
+#line 1640 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1590: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1646: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1599 "configure"
+#line 1657 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1605: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1663: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
else
echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
CPP=/lib/cpp
fi
for ac_hdr in string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h errno.h sys/types.h
do
-ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:1689: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1633 "configure"
+#line 1694 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1638: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1699: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
eval "ac_cv_header_$ac_safe=yes"
else
echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_header_$ac_safe=no"
fi
fi
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
- ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
cat >> confdefs.h <<EOF
#define $ac_tr_hdr 1
EOF
# Put this here so that autoconf's "cross-compiling" message doesn't confuse
# people who are not cross-compiling but are compiling cross-assemblers.
echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6
+echo "configure:1729: checking whether compiling a cross-assembler" >&5
if test "${host}" = "${target}"; then
cross_gas=no
else
fi
echo "$ac_t""$cross_gas" 1>&6
-# If we cannot run a trivial program, we must be cross compiling.
-echo $ac_n "checking whether cross-compiling""... $ac_c" 1>&6
-if eval "test \"`echo '$''{'ac_cv_c_cross'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test "$cross_compiling" = yes; then
- ac_cv_c_cross=yes
-else
-cat > conftest.$ac_ext <<EOF
-#line 1686 "configure"
-#include "confdefs.h"
-main(){return(0);}
-EOF
-{ (eval echo configure:1690: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
-if test -s conftest && (./conftest; exit) 2>/dev/null; then
- ac_cv_c_cross=no
-else
- ac_cv_c_cross=yes
-fi
-fi
-rm -fr conftest*
-fi
-
-echo "$ac_t""$ac_cv_c_cross" 1>&6
-cross_compiling=$ac_cv_c_cross
-
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
+echo "configure:1744: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1710 "configure"
+#line 1749 "configure"
#include "confdefs.h"
#include <alloca.h>
-int main() { return 0; }
-int t() {
+int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:1718: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:1756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
ac_cv_header_alloca_h=no
fi
rm -f conftest*
-
fi
echo "$ac_t""$ac_cv_header_alloca_h" 1>&6
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-if eval "test \"`echo '$''{'ac_cv_func_alloca'+set}'`\" = set"; then
+echo "configure:1777: checking for alloca" >&5
+if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1742 "configure"
+#line 1782 "configure"
#include "confdefs.h"
#ifdef __GNUC__
# endif
#endif
-int main() { return 0; }
-int t() {
+int main() {
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:1766: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:1805: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
- ac_cv_func_alloca=yes
+ ac_cv_func_alloca_works=yes
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
- ac_cv_func_alloca=no
+ ac_cv_func_alloca_works=no
fi
rm -f conftest*
-
fi
-echo "$ac_t""$ac_cv_func_alloca" 1>&6
-if test $ac_cv_func_alloca = yes; then
+echo "$ac_t""$ac_cv_func_alloca_works" 1>&6
+if test $ac_cv_func_alloca_works = yes; then
cat >> confdefs.h <<\EOF
#define HAVE_ALLOCA 1
EOF
fi
-if test $ac_cv_func_alloca = no; then
+if test $ac_cv_func_alloca_works = no; then
# The SVR3 libPW and SVR4 libucb both contain incompatible functions
# that cause trouble. Some versions do not even contain alloca or
# contain a buggy version. If you still want to use their alloca,
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
+echo "configure:1837: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1801 "configure"
+#line 1842 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:1867: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1830 "configure"
+#line 1872 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
builtin and then its argument prototype would still apply. */
char $ac_func();
-int main() { return 0; }
-int t() {
+int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
; return 0; }
EOF
-if { (eval echo configure:1854: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:1895: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
-
fi
+
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
cat >> confdefs.h <<EOF
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
+echo "configure:1922: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
ac_cv_c_stack_direction=0
else
-cat > conftest.$ac_ext <<EOF
-#line 1886 "configure"
+ cat > conftest.$ac_ext <<EOF
+#line 1930 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-{ (eval echo configure:1905: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }
-if test -s conftest && (./conftest; exit) 2>/dev/null; then
+if { (eval echo configure:1949: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+then
ac_cv_c_stack_direction=1
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
ac_cv_c_stack_direction=-1
fi
-fi
rm -fr conftest*
fi
+fi
+
echo "$ac_t""$ac_cv_c_stack_direction" 1>&6
cat >> confdefs.h <<EOF
#define STACK_DIRECTION $ac_cv_c_stack_direction
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
+echo "configure:1971: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 1929 "configure"
+#line 1978 "configure"
#include "confdefs.h"
-int main() { return 0; }
-int t() {
+int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:1937: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1985: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
fi
rm -f conftest*
-
done
fi
for ac_func in unlink remove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2015: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1969 "configure"
+#line 2020 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
builtin and then its argument prototype would still apply. */
char $ac_func();
-int main() { return 0; }
-int t() {
+int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
; return 0; }
EOF
-if { (eval echo configure:1993: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:2043: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
-
fi
+
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
for ac_func in sbrk
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2072: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2024 "configure"
+#line 2077 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
builtin and then its argument prototype would still apply. */
char $ac_func();
-int main() { return 0; }
-int t() {
+int main() {
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
; return 0; }
EOF
-if { (eval echo configure:2048: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:2100: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
eval "ac_cv_func_$ac_func=no"
fi
rm -f conftest*
-
fi
+
if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
echo "$ac_t""yes" 1>&6
ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
# enough, but on some of those systems, the assert macro relies on requoting
# working properly!
echo $ac_n "checking for working assert macro""... $ac_c" 1>&6
+echo "configure:2129: checking for working assert macro" >&5
if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2079 "configure"
+#line 2134 "configure"
#include "confdefs.h"
#include <assert.h>
#include <stdio.h>
-int main() { return 0; }
-int t() {
+int main() {
/* check for requoting problems */
static int a, b, c, d;
; return 0; }
EOF
-if { (eval echo configure:2096: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:2150: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_assert_ok=yes
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
gas_cv_assert_ok=no
fi
rm -f conftest*
-
fi
echo "$ac_t""$gas_cv_assert_ok" 1>&6
test $gas_cv_assert_ok = yes || cat >> confdefs.h <<\EOF
"
echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6
+echo "configure:2191: checking whether declaration is required for strstr" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2140 "configure"
+#line 2196 "configure"
#include "confdefs.h"
$gas_test_headers
-int main() { return 0; }
-int t() {
+int main() {
typedef char *(*f)();
f x;
; return 0; }
EOF
-if { (eval echo configure:2152: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:2207: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_strstr=no
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
gas_cv_decl_needed_strstr=yes
fi
rm -f conftest*
-
fi
echo "$ac_t""$gas_cv_decl_needed_strstr" 1>&6
test $gas_cv_decl_needed_strstr = no || {
echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6
+echo "configure:2228: checking whether declaration is required for malloc" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2176 "configure"
+#line 2233 "configure"
#include "confdefs.h"
$gas_test_headers
-int main() { return 0; }
-int t() {
+int main() {
typedef char *(*f)();
f x;
; return 0; }
EOF
-if { (eval echo configure:2188: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:2244: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_malloc=no
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
gas_cv_decl_needed_malloc=yes
fi
rm -f conftest*
-
fi
echo "$ac_t""$gas_cv_decl_needed_malloc" 1>&6
test $gas_cv_decl_needed_malloc = no || {
echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6
+echo "configure:2265: checking whether declaration is required for free" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2212 "configure"
+#line 2270 "configure"
#include "confdefs.h"
$gas_test_headers
-int main() { return 0; }
-int t() {
+int main() {
typedef void (*f)();
f x;
; return 0; }
EOF
-if { (eval echo configure:2224: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:2281: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_free=no
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
gas_cv_decl_needed_free=yes
fi
rm -f conftest*
-
fi
echo "$ac_t""$gas_cv_decl_needed_free" 1>&6
test $gas_cv_decl_needed_free = no || {
echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6
+echo "configure:2302: checking whether declaration is required for sbrk" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2248 "configure"
+#line 2307 "configure"
#include "confdefs.h"
$gas_test_headers
-int main() { return 0; }
-int t() {
+int main() {
typedef char *(*f)();
f x;
; return 0; }
EOF
-if { (eval echo configure:2260: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:2318: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_sbrk=no
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
gas_cv_decl_needed_sbrk=yes
fi
rm -f conftest*
-
fi
echo "$ac_t""$gas_cv_decl_needed_sbrk" 1>&6
test $gas_cv_decl_needed_sbrk = no || {
# for it?
echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6
+echo "configure:2342: checking whether declaration is required for errno" >&5
if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2287 "configure"
+#line 2347 "configure"
#include "confdefs.h"
#ifdef HAVE_ERRNO_H
#include <errno.h>
#endif
-int main() { return 0; }
-int t() {
+int main() {
typedef int f;
f x;
; return 0; }
EOF
-if { (eval echo configure:2303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+if { (eval echo configure:2362: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
gas_cv_decl_needed_errno=no
else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
rm -rf conftest*
gas_cv_decl_needed_errno=yes
fi
rm -f conftest*
-
fi
echo "$ac_t""$gas_cv_decl_needed_errno" 1>&6
test $gas_cv_decl_needed_errno = no || {
# --recheck option to rerun configure.
#
EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
- >> confcache
+ case `(ac_space=' '; set) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
if cmp -s $cache_file confcache; then
:
else
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.10"
+ echo "$CONFIG_STATUS generated by autoconf version 2.12"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
CEOF
EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+ else
+ sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+ fi
+ if test ! -s conftest.s$ac_file; then
+ ac_more_lines=false
+ rm -f conftest.s$ac_file
+ else
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f conftest.s$ac_file"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+ fi
+ ac_file=`expr $ac_file + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_cmds`
+ fi
+done
+if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
+fi
+EOF
+
cat >> $CONFIG_STATUS <<EOF
CONFIG_FILES=\${CONFIG_FILES-"Makefile doc/Makefile .gdbinit:gdbinit.in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile]", defaulting infile="outfile.in".
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
- # Adjust relative srcdir, etc. for subdirectories.
+ # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
# Remove last slash and all that follows it. Not all systems have dirname.
ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
[/$]*) INSTALL="$ac_given_INSTALL" ;;
*) INSTALL="$ac_dots$ac_given_INSTALL" ;;
esac
+
echo creating "$ac_file"
rm -f "$ac_file"
configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
# $configure_input" ;;
*) ac_comsub= ;;
esac
+
+ ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
sed -e "$ac_comsub
s%@configure_input@%$configure_input%g
s%@srcdir@%$srcdir%g
s%@top_srcdir@%$top_srcdir%g
s%@INSTALL@%$INSTALL%g
-" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
fi; done
-rm -f conftest.subs
+rm -f conftest.s*
# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
# NAME is the cpp macro being defined and VALUE is the value it is being given.
ac_eC=' '
ac_eD='%g'
-CONFIG_HEADERS=${CONFIG_HEADERS-"conf"}
+if test "${CONFIG_HEADERS+set}" != set; then
+EOF
+cat >> $CONFIG_STATUS <<EOF
+ CONFIG_HEADERS="conf"
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+fi
for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
- # Support "outfile[:infile]", defaulting infile="outfile.in".
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
case "$ac_file" in
- *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
*) ac_file_in="${ac_file}.in" ;;
esac
echo creating $ac_file
rm -f conftest.frag conftest.in conftest.out
- cp $ac_given_srcdir/$ac_file_in conftest.in
+ ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+ cat $ac_file_inputs > conftest.in
EOF
# Break up conftest.vals because some shells have a limit on
# the size of here documents, and old seds have small limits too.
-# Maximum number of lines to put in a single here document.
-ac_max_here_lines=12
rm -f conftest.tail
while :
{ echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; }
fi
done
+EOF
+cat >> $CONFIG_STATUS <<EOF
+EOF
+cat >> $CONFIG_STATUS <<\EOF
exit 0
EOF
arm-*-riscix*) fmt=aout ;;
arm-*-pe) fmt=coff targ=armcoff em=pe ;;
-# start-sanitize-d10v
d10v-*-*) fmt=elf bfd_gas=yes ;;
-# end-sanitize-d10v
# start-sanitize-d30v
d30v-*-*) fmt=elf bfd_gas=yes ;;
# end-sanitize-d30v
echo Processing \"arc\"...
fi
-d10v_files="all.texi as.texinfo"
-if ( echo $* | grep keep\-d10v > /dev/null ) ; then
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Keeping d10v stuff in $i
- fi
- fi
- done
-else
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Removing traces of \"d10v\" from $i...
- fi
- cp $i new
- sed '/start\-sanitize\-d10v/,/end-\sanitize\-d10v/d' < $i > new
- if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
- if [ -n "${verbose}" ] ; then
- echo Caching $i in .Recover...
- fi
- mv $i .Recover
- fi
- mv new $i
- fi
- done
-fi
-
for i in * ; do
if test ! -d $i && (grep sanitize $i > /dev/null) ; then
echo '***' Some mentions of Sanitize are still left in $i! 1>&2
[ -mbig-endian | -mlittle-endian ]
@end ifset
@c end-sanitize-arc
-@c start-sanitize-d10v
@ifset D10V
[ -O ]
@end ifset
-@c end-sanitize-d10v
@ifset H8
@c Hitachi family chips have no machine-dependent assembler options
@end ifset
@ifset SPARC
@c The order here is important. See c-sparc.texi.
- [ -Av6 | -Av7 | -Av8 | -Asparclite | -Av9 | -Av9a ]
+ [ -Av6 | -Av7 | -Av8 | -Asparclet | -Asparclite | -Av9 | -Av9a ]
[ -xarch=v8plus | -xarch=v8plusa ] [ -bump ]
@end ifset
@ifset Z8000
@end table
@end ifset
-@c start-sanitize-d10v
@ifset D10V
The following options are available when @value{AS} is configured for
a D10V processor.
Optimize output by parallelizing instructions.
@end table
@end ifset
-@c end-sanitize-d10v
@ifset I960
The following options are available when @value{AS} is configured for the
for the SPARC architecture:
@table @code
-@item -Av6 | -Av7 | -Av8 | -Asparclite | -Av9 | -Av9a
+@item -Av6 | -Av7 | -Av8 | -Asparclet | -Asparclite | -Av9 | -Av9a
Explicitly select a variant of the SPARC architecture.
@item -xarch=v8plus | -xarch=v8plusa
@end ifset
@node Align
-@section @code{.align @var{abs-expr} , @var{abs-expr}}
+@section @code{.align @var{abs-expr}, @var{abs-expr}, @var{abs-expr}}
@cindex padding the location counter
@cindex @code{align} directive
-Pad the location counter (in the current subsection) to a particular
-storage boundary. The first expression (which must be absolute) is the
-alignment required, as described below.
-The second expression (also absolute) gives the value to be stored in
-the padding bytes. It (and the comma) may be omitted. If it is
-omitted, the padding bytes are zero.
-For the alpha, if the section is marked as containing code and the
-padding expression is omitted, then the space is filled with no-ops.
+Pad the location counter (in the current subsection) to a particular storage
+boundary. The first expression (which must be absolute) is the alignment
+required, as described below.
+
+The second expression (also absolute) gives the fill value to be stored in the
+padding bytes. It (and the comma) may be omitted. If it is omitted, the
+padding bytes are normally zero. However, on some systems, if the section is
+marked as containing code and the fill value is omitted, the space is filled
+with no-op instructions.
+
+The third expression is also absolute, and is also optional. If it is present,
+it is the maximum number of bytes that should be skipped by this alignment
+directive. If doing the alignment would require skipping more bytes than the
+specified maximum, then the alignment is not done at all. You can omit the
+fill value (the second argument) entirely by simply using two commas after the
+required alignment; this can be useful if you want the alignment to be filled
+with no-op instructions when appropriate.
The way the required alignment is specified varies from system to system.
For the a29k, hppa, m68k, m88k, w65, sparc, and Hitachi SH, and i386 using ELF
a zero byte. The ``z'' in @samp{.asciz} stands for ``zero''.
@node Balign
-@section @code{.balign[wl] @var{abs-expr} , @var{abs-expr}}
+@section @code{.balign[wl] @var{abs-expr}, @var{abs-expr}, @var{abs-expr}}
@cindex padding the location counter given number of bytes
@cindex @code{balign} directive
the location counter until it is a multiple of 8. If the location counter
is already a multiple of 8, no change is needed.
-The second expression (also absolute) gives the value to be stored in
-the padding bytes. It (and the comma) may be omitted. If it is
-omitted, the padding bytes are zero.
+The second expression (also absolute) gives the fill value to be stored in the
+padding bytes. It (and the comma) may be omitted. If it is omitted, the
+padding bytes are normally zero. However, on some systems, if the section is
+marked as containing code and the fill value is omitted, the space is filled
+with no-op instructions.
+
+The third expression is also absolute, and is also optional. If it is present,
+it is the maximum number of bytes that should be skipped by this alignment
+directive. If doing the alignment would require skipping more bytes than the
+specified maximum, then the alignment is not done at all. You can omit the
+fill value (the second argument) entirely by simply using two commas after the
+required alignment; this can be useful if you want the alignment to be filled
+with no-op instructions when appropriate.
@cindex @code{balignw} directive
@cindex @code{balignl} directive
@var{fill} defaults to zero.
@node P2align
-@section @code{.p2align[wl] @var{abs-expr} , @var{abs-expr}}
+@section @code{.p2align[wl] @var{abs-expr}, @var{abs-expr}, @var{abs-expr}}
@cindex padding the location counter given a power of two
@cindex @code{p2align} directive
counter until it a multiple of 8. If the location counter is already a
multiple of 8, no change is needed.
-The second expression (also absolute) gives the value to be stored in
-the padding bytes. It (and the comma) may be omitted. If it is
-omitted, the padding bytes are zero.
+The second expression (also absolute) gives the fill value to be stored in the
+padding bytes. It (and the comma) may be omitted. If it is omitted, the
+padding bytes are normally zero. However, on some systems, if the section is
+marked as containing code and the fill value is omitted, the space is filled
+with no-op instructions.
+
+The third expression is also absolute, and is also optional. If it is present,
+it is the maximum number of bytes that should be skipped by this alignment
+directive. If doing the alignment would require skipping more bytes than the
+specified maximum, then the alignment is not done at all. You can omit the
+fill value (the second argument) entirely by simply using two commas after the
+required alignment; this can be useful if you want the alignment to be filled
+with no-op instructions when appropriate.
@cindex @code{p2alignw} directive
@cindex @code{p2alignl} directive
Set the value of @var{symbol} to @var{expression}. This
changes @var{symbol}'s value and type to conform to
@var{expression}. If @var{symbol} was flagged as external, it remains
-flagged. (@xref{Symbol Attributes}.)
+flagged (@pxref{Symbol Attributes}).
You may @code{.set} a symbol many times in the same assembly.
* ARC-Dependent:: ARC Dependent Features
@end ifset
@c end-sanitize-arc
-@c start-sanitize-d10v
@ifset D10V
* D10V-Dependent:: D10V Dependent Features
@end ifset
-@c end-sanitize-d10v
@ifset H8/300
* H8/300-Dependent:: Hitachi H8/300 Dependent Features
@end ifset
@end ifclear
@end ifset
-@c start-sanitize-d10v
@ifset D10V
@include c-d10v.texi
@end ifset
-@c end-sanitize-d10v
@ifset H8/300
@include c-h8300.texi
done
fi
-if ( echo $* | grep keep\-d10v > /dev/null ) ; then
- for i in * ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Keeping d10v stuff in $i
- fi
- fi
- done
-else
- for i in * ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Removing traces of \"d10v\" from $i...
- fi
- cp $i new
- sed '/start\-sanitize\-d10v/,/end-\sanitize\-d10v/d' < $i > new
- if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
- if [ -n "${verbose}" ] ; then
- echo Caching $i in .Recover...
- fi
- mv $i .Recover
- fi
- mv new $i
- fi
- done
-fi
-
if ( echo $* | grep keep\-gm > /dev/null ) ; then
for i in * ; do
if test ! -d $i && (grep sanitize-gm $i > /dev/null) ; then
to reflect the fact that we are now using an AT_ENTRY_POINT
call dummy.
-start-sanitize-d10v
Sun Dec 22 15:52:25 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-tdep.c (d10v_skip_prologue): PR11287. Fix problem where
some breakpoints weren't being set.
-end-sanitize-d10v
Sat Dec 21 12:57:59 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* config/mips/tm-mips.h (PC_IN_CALL_DUMMY): Removed, the default
(xfer_link_map_member): Work around problem with alignments
in struct obj when compiling GDB under N32 ABI.
-start-sanitize-d10v
Thu Dec 5 23:30:44 1996 Stan Shebs <shebs@andros.cygnus.com>
* d10v-tdep.c: Add support for examination and interpretation
of instruction trace buffer.
(trace, untrace, info trace, tdisassemble): New commands.
-end-sanitize-d10v
Thu Dec 5 14:06:23 1996 Doug Evans <dje@canuck.cygnus.com>
* config/sparc/tm-sparclet.h (TARGET_BYTE_ORDER): Undef.
From: Paul Eggert <eggert@twinsun.com>
* remote-bug.c (wait_strings): Avoid creating a trigraph.
-start-sanitize-d10v
Fri Nov 22 15:55:22 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* valops.c (value_at, value_fetch_lazy): Put in D10V call
* values.c (value_from_longest): Removed previous d10v changes.
* config/d10v/tm-d10v.h (TARGET_PTR_BIT): Change to 4 bytes.
-end-sanitize-d10v
Fri Nov 22 10:06:19 1996 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
* config/i386/nm-i386v4.h (LOSING_POLL): Define, needed for
virtual buf instead of the raw buf. Needed for REGISTER_CONVERT
to work with non-floating point regs.
-start-sanitize-d10v
* d10v-tdep.c (d10v_skip_prologue): If we have line debugging
information, then the end of the prologue should the first
assembly instruction of the first source line.
(REGISTER_CONVERT_TO_RAW): Define.
(D10V_MAKE_DADDR): Define.
(D10V_MAKE_IADDR): Define.
-end-sanitize-d10v
+
Wed Nov 20 16:15:15 1996 Geoffrey Noer <noer@cygnus.com>
* config/i386/cygwin32.mh: add MMALLOC_CFLAGS = -I$(MMALLOC_SRC)
instead of doing addr>>32 to eliminate a warning produced by GCC
on 32-bit systems.
-start-sanitize-d10v
* config/d10v/tm-d10v.h (ULONGEST): Define.
-end-sanitize-d10v
Tue Nov 12 12:25:27 1996 Jim Wilson <wilson@cygnus.com>
* c-typeprint.c (cp_type_print_method_args): Pass -1 for show in
* remote-sim.c (simulator_command): Set up callbacks before
entering the simulator.
-start-sanitize-d10v
Thu Nov 7 15:19:08 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-tdep.c: Fix some problems with inferior function calls.
* config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Change dummy to be
a pointer to the dummy's stack instead of just a flag.
-end-sanitize-d10v
start-sanitize-m32r
Tue Nov 5 10:21:02 1996 Michael Snyder <msnyder@cleaver.cygnus.com>
for shared libraries from the minimal symbol table of the main
executable first.
-start-sanitize-d10v
Fri Nov 1 13:59:28 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-tdep.c, config/d10v/tm-d10v.h: Major fixes to support
inferior function calls and proper stack backtracing on D10V-EVA
board.
-end-sanitize-d10v
Fri Nov 1 10:50:51 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* config/powerpc/linux.mh (NATDEPFILES): Fix up things so that it
* TODO: Add item suggesting an "info bfd" command.
-start-sanitize-d10v
Tue Oct 29 12:48:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-tdep.c: Snapshot that supports D10V-EVA board.
* config/d10v/tm-d10v.h (REGISTER_NAMES): Add imap0,imap1,dmap.
(TARGET_READ_FP,TARGET_WRITE_FP): Define.
-end-sanitize-d10v
Mon Oct 28 17:34:24 1996 Stu Grossman (grossman@critters.cygnus.com)
* mswin/genmakes mswin/recordit: New scripts to generate make
* (v850_frame_chain): Use new calling convention for scan_prologue.
end-sanitize-v850
-start-sanitize-d10v
Tue Oct 22 10:25:29 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-tdep.c, config/d10v/tm-d10v.h: Changes to allow stack
backtraces and inferior function calls.
-end-sanitize-d10v
Tue Oct 22 10:32:46 1996 Stan Shebs <shebs@andros.cygnus.com>
* mpw-make.sed: Update init.c editing to work with Oct 8 change.
15 seconds to 30 seconds.
end-sanitize-gdbtk
-start-sanitize-d10v
Fri Sep 27 13:32:53 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* config/d10v/tm-d10v.h (TARGET_{INT,PTR}_BIT): Define.
(TARGET_{,LONG_}DOUBLE_BIT): Ditto.
-end-sanitize-d10v
Thu Sep 26 23:10:26 1996 Mark Alexander <marka@cygnus.com>
* configure.in, config/i386/tm-linux.h: Fix configure
* config/m68k/monitor.mt (TDEPFILES): Add it.
* NEWS: Mention it.
-start-sanitize-d10v
Mon Sep 23 16:13:50 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/d10v/tm-d10v.h (SAVED_PC_AFTER_CALL): Fixed.
Now single-steps correctly.
* d10v-tdep.c (d10v_pop_frame): Fixed.
-end-sanitize-d10v
Fri Sep 20 16:10:58 1996 Stan Shebs <shebs@andros.cygnus.com>
* config/sh/tm-sh.h (REGISTER_NAMES): Move fp registers to
Rearrange to match REGISTER_NAMES.
* sh3-rom.c (sh3_regnames, sh3e_regnames): Ditto.
-start-sanitize-d10v
Thu Sep 19 16:19:01 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-tdep.c: Stack chain should work now.
* d10v-tdep.c, config/d10v/tm-d10v.h: Snapshot.
-end-sanitize-d10v
Tue Sep 17 12:20:50 1996 Ian Lance Taylor <ian@cygnus.com>
* configure.in: Add cases for MIPS 5000 like MIPS 4300.
to before the first.
* configure: regenerated
-start-sanitize-d10v
Mon Aug 26 18:36:54 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/d10v/d10v.mt: New file.
* configure.in: New target D10V.
* d10v-tdep.c: New file.
-end-sanitize-d10v
Sun Aug 25 00:09:47 1996 Fred Fish <fnf@rtl.cygnus.com>
* rs6000-tdep.c: Fix typo in comment.
For older changes see ChangeLog-95
\f
Local Variables:
-mode: indented-text
+mode: change-log
left-margin: 8
fill-column: 74
version-control: never
c1-*-*) gdb_target=convex ;;
c2-*-*) gdb_target=convex ;;
-# start-sanitize-d10v
d10v-*-*) gdb_target=d10v ;;
-# end-sanitize-d10v
h8300-*-*) gdb_target=h8300 ;;
h8500-*-*) gdb_target=h8500 ;;
static int typecmp PARAMS ((int staticp, struct type *t1[], value_ptr t2[]));
+#ifdef CALL_DUMMY
static CORE_ADDR find_function_addr PARAMS ((value_ptr, struct type **));
+static value_ptr value_arg_coerce PARAMS ((value_ptr, struct type *));
+#endif
+
#ifndef PUSH_ARGUMENTS
static CORE_ADDR value_push PARAMS ((CORE_ADDR, value_ptr));
static value_ptr cast_into_complex PARAMS ((struct type *, value_ptr));
-static value_ptr value_arg_coerce PARAMS ((value_ptr, struct type *));
-
#define VALUE_SUBSTRING_START(VAL) VALUE_FRAME(VAL)
/* Flag for whether we want to abandon failed expression evals by default. */
low_bound = 0, high_bound = 0;
new_length = val_length / element_length;
if (val_length % element_length != 0)
- warning("array element type size does not divide object size in cast");
+ warning("array element type size does not divide object size in cast");
/* FIXME-type-allocation: need a way to free this type when we are
done with it. */
range_type = create_range_type ((struct type *) NULL,
}
else if (VALUE_LVAL (arg2) == lval_memory)
{
- return value_at_lazy (type, VALUE_ADDRESS (arg2) + VALUE_OFFSET (arg2));
+ return value_at_lazy (type, VALUE_ADDRESS (arg2) + VALUE_OFFSET (arg2),
+ VALUE_BFD_SECTION (arg2));
}
else if (code1 == TYPE_CODE_VOID)
{
the contents are actually required. */
value_ptr
-value_at (type, addr)
+value_at (type, addr, sect)
struct type *type;
CORE_ADDR addr;
+ asection *sect;
{
register value_ptr val;
val = allocate_value (type);
-/* start-sanitize-d10v */
#ifdef GDB_TARGET_IS_D10V
if (TYPE_TARGET_TYPE(type) && TYPE_CODE(TYPE_TARGET_TYPE(type)) == TYPE_CODE_FUNC)
{
}
else
#endif
-/* end-sanitize-d10v */
- read_memory (addr, VALUE_CONTENTS_RAW (val), TYPE_LENGTH (type));
+ read_memory_section (addr, VALUE_CONTENTS_RAW (val), TYPE_LENGTH (type), sect);
VALUE_LVAL (val) = lval_memory;
VALUE_ADDRESS (val) = addr;
+ VALUE_BFD_SECTION (val) = sect;
return val;
}
/* Return a lazy value with type TYPE located at ADDR (cf. value_at). */
value_ptr
-value_at_lazy (type, addr)
+value_at_lazy (type, addr, sect)
struct type *type;
CORE_ADDR addr;
+ asection *sect;
{
register value_ptr val;
VALUE_LVAL (val) = lval_memory;
VALUE_ADDRESS (val) = addr;
VALUE_LAZY (val) = 1;
+ VALUE_BFD_SECTION (val) = sect;
return val;
}
CORE_ADDR addr = VALUE_ADDRESS (val) + VALUE_OFFSET (val);
int length = TYPE_LENGTH (VALUE_TYPE (val));
-/* start-sanitize-d10v */
#ifdef GDB_TARGET_IS_D10V
struct type *type = VALUE_TYPE(val);
if (TYPE_TARGET_TYPE(type) && TYPE_CODE(TYPE_TARGET_TYPE(type)) == TYPE_CODE_FUNC)
}
else
#endif
-/* end-sanitize-d10v */
if (length)
- read_memory (addr, VALUE_CONTENTS_RAW (val), length);
+ read_memory_section (addr, VALUE_CONTENTS_RAW (val), length,
+ VALUE_BFD_SECTION (val));
VALUE_LAZY (val) = 0;
return 0;
}
struct block *b;
{
value_ptr val;
- struct frame_info *frame;
+ struct frame_info *frame = NULL;
if (!b)
frame = NULL; /* Use selected frame. */
value_coerce_function (arg1)
value_ptr arg1;
{
+ value_ptr retval;
if (VALUE_LVAL (arg1) != lval_memory)
error ("Attempt to take address of value not located in memory.");
- return value_from_longest (lookup_pointer_type (VALUE_TYPE (arg1)),
- (LONGEST) (VALUE_ADDRESS (arg1) + VALUE_OFFSET (arg1)));
+ retval = value_from_longest (lookup_pointer_type (VALUE_TYPE (arg1)),
+ (LONGEST) (VALUE_ADDRESS (arg1) + VALUE_OFFSET (arg1)));
+ VALUE_BFD_SECTION (retval) = VALUE_BFD_SECTION (arg1);
+ return retval;
}
/* Return a pointer value for the object for which ARG1 is the contents. */
value_addr (arg1)
value_ptr arg1;
{
+ value_ptr retval;
+
struct type *type = check_typedef (VALUE_TYPE (arg1));
if (TYPE_CODE (type) == TYPE_CODE_REF)
{
if (VALUE_LVAL (arg1) != lval_memory)
error ("Attempt to take address of value not located in memory.");
- return value_from_longest (lookup_pointer_type (VALUE_TYPE (arg1)),
- (LONGEST) (VALUE_ADDRESS (arg1) + VALUE_OFFSET (arg1)));
+ retval = value_from_longest (lookup_pointer_type (VALUE_TYPE (arg1)),
+ (LONGEST) (VALUE_ADDRESS (arg1) + VALUE_OFFSET (arg1)));
+ VALUE_BFD_SECTION (retval) = VALUE_BFD_SECTION (arg1);
+ return retval;
}
/* Given a value of a pointer type, apply the C unary * operator to it. */
BUILTIN_TYPE_LONGEST would seem to be a mistake. */
if (TYPE_CODE (type1) == TYPE_CODE_INT)
return value_at (builtin_type_int,
- (CORE_ADDR) value_as_long (arg1));
+ (CORE_ADDR) value_as_long (arg1),
+ VALUE_BFD_SECTION (arg1));
else if (TYPE_CODE (type1) == TYPE_CODE_PTR)
- return value_at_lazy (TYPE_TARGET_TYPE (type1), value_as_pointer (arg1));
+ return value_at_lazy (TYPE_TARGET_TYPE (type1), value_as_pointer (arg1),
+ VALUE_BFD_SECTION (arg1));
error ("Attempt to take contents of a non-pointer value.");
return 0; /* For lint -- never reached */
}
#endif /* !PUSH_ARGUMENTS */
+#ifdef CALL_DUMMY
/* Perform the standard coercions that are specified
for arguments to be passed to C functions.
return funaddr;
}
-#if defined (CALL_DUMMY)
/* All this stuff with a dummy frame may seem unnecessarily complicated
(why not just save registers in GDB?). The purpose of pushing a dummy
frame which looks just like a real frame is so that if you call a
VALUE_CONTENTS (elemvec[idx]),
typelength);
}
+ VALUE_BFD_SECTION (val) = VALUE_BFD_SECTION (elemvec[0]);
return val;
}
/* Create the array type and set up an array value to be evaluated lazily. */
- val = value_at_lazy (arraytype, addr);
+ val = value_at_lazy (arraytype, addr, VALUE_BFD_SECTION (elemvec[0]));
return (val);
}
addr = allocate_space_in_inferior (len);
write_memory (addr, ptr, len);
- val = value_at_lazy (stringtype, addr);
+ val = value_at_lazy (stringtype, addr, NULL);
return (val);
}
error ("Internal error: could not find physical static variable named %s",
phys_name);
v = value_at (TYPE_FIELD_TYPE (type, i),
- SYMBOL_VALUE_ADDRESS (sym));
+ SYMBOL_VALUE_ADDRESS (sym), SYMBOL_BFD_SECTION (sym));
}
else
v = value_primitive_field (arg1, offset, i, type);
error ("Internal error: could not find physical static variable named %s",
phys_name);
return value_at (SYMBOL_TYPE (sym),
- SYMBOL_VALUE_ADDRESS (sym));
+ SYMBOL_VALUE_ADDRESS (sym),
+ SYMBOL_BFD_SECTION (sym));
}
if (TYPE_FIELD_PACKED (t, i))
error ("pointers to bitfield members not allowed");
fi
-d10v_files="ChangeLog dis-asm.h"
-if ( echo $* | grep keep\-d10v > /dev/null ) ; then
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Keeping d10v stuff in $i
- fi
- fi
- done
-else
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Removing traces of \"d10v\" from $i...
- fi
- cp $i new
- sed '/start\-sanitize\-d10v/,/end-\sanitize\-d10v/d' < $i > new
- if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
- if [ -n "${verbose}" ] ; then
- echo Caching $i in .Recover...
- fi
- mv $i .Recover
- fi
- mv new $i
- fi
- done
-fi
-
m32r_files="ChangeLog dis-asm.h"
if ( echo $* | grep keep\-m32r > /dev/null ) ; then
for i in $m32r_files ; do
+Thu Feb 6 14:20:01 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
+
+ * dis-asm.h: (disassemble_info): Add new fields
+ bytes_per_chunk and display_endian to control the
+ display of raw instructions.
+
+start-sanitize-tic80
+Fri Dec 27 22:17:37 1996 Fred Fish <fnf@cygnus.com>
+
+ * dis-asm.h (print_insn_tic80): Declare.
+
+end-sanitize-tic80
+Sun Dec 8 17:11:12 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * callback.h (host_callback): New member `error'.
+
+Wed Nov 20 00:40:23 1996 Doug Evans <dje@canuck.cygnus.com>
+
+ * callback.h: New file, moved here from gdb.
Mon Nov 18 16:34:00 1996 Dawn Perchik <dawn@critters.cygnus.com>
* dis-asm.h (print_insn_alpha): Don't declare.
(print_insn_alpha_osf, print_insn_alpha_vms): Declare.
-start-sanitize-d10v
Wed Jul 17 14:45:12 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* dis-asm.h: (print_insn_d10v): Declare.
-end-sanitize-d10v
Mon Jul 15 16:55:38 1996 Stu Grossman (grossman@critters.cygnus.com)
* dis-asm.h: Get rid of decls for print_insn_i8086,
\f
Local Variables:
-mode: indented-text
+mode: change-log
left-margin: 8
fill-column: 74
version-control: never
done
fi
-d10v_files="ChangeLog common.h"
-if ( echo $* | grep keep\-d10v > /dev/null ) ; then
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Keeping d10v stuff in $i
- fi
- fi
- done
-else
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Removing traces of \"d10v\" from $i...
- fi
- cp $i new
- sed '/start\-sanitize\-d10v/,/end-\sanitize\-d10v/d' < $i > new
- if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
- if [ -n "${verbose}" ] ; then
- echo Caching $i in .Recover...
- fi
- mv $i .Recover
- fi
- mv new $i
- fi
- done
-fi
-
d30v_files="ChangeLog common.h"
if ( echo $* | grep keep\-d30v > /dev/null ) ; then
for i in $d30v_files ; do
* mips.h (STO_MIPS16): Define.
-start-sanitize-d10v
Tue Nov 12 15:45:42 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v.h: Remove empty file.
-end-sanitize-d10v
Tue Oct 8 11:31:24 1996 Ian Lance Taylor <ian@cygnus.com>
* mips.h (EF_MIPS_ABI2): Define.
* dwarf2.h: New file.
-start-sanitize-d10v
Jul 18 13:20:39 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* common.h (EM_CYGNUS_D10V): Define.
* d10v.h: New file.
-end-sanitize-d10v
Fri Jun 21 12:33:24 1996 Richard Henderson <rth@tamu.edu>
* alpha.h: New file.
/* Alpha backend magic number. Written in the absence of an ABI. */
#define EM_ALPHA 0x9026
-/* start-sanitize-d10v */
/* D10V backend magic number. Written in the absence of an ABI. */
#define EM_CYGNUS_D10V 0x7650
-/* end-sanitize-d10v */
/* start-sanitize-d30v */
/* D30V backend magic number. Written in the absence of an ABI. */
fi
-d10v_files="ChangeLog"
-if ( echo $* | grep keep\-d10v > /dev/null ) ; then
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Keeping d10v stuff in $i
- fi
- fi
- done
-else
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Removing traces of \"d10v\" from $i...
- fi
- cp $i new
- sed '/start\-sanitize\-d10v/,/end-\sanitize\-d10v/d' < $i > new
- if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
- if [ -n "${verbose}" ] ; then
- echo Caching $i in .Recover...
- fi
- mv $i .Recover
- fi
- mv new $i
- fi
- done
-fi
-
d30v_files="ChangeLog"
if ( echo $* | grep keep\-d30v > /dev/null ) ; then
for i in $d30v_files ; do
* hppa.h (pitlb, pitlbe, iitlba, iitlbp, fic, fice): Accept
a 3 bit space id instead of a 2 bit space id.
-start-sanitize-d10v
Thu Aug 15 13:11:46 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v.h: Add some additional defines to support the
assembler in determining which operations can be done in parallel.
-end-sanitize-d10v
Tue Aug 6 11:13:22 1996 Jeffrey A Law (law@cygnus.com)
* h8300.h (SN): Define.
(nop, bpt, rte, rts, sleep, clrmac): These have no size associated
with them.
-start-sanitize-d10v
Fri Jul 26 11:47:10 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v.h (OPERAND_SHIFT): New operand flag.
* d10v.h (pd_reg): Define. Putting the definition here allows
the assembler and disassembler to share the same struct.
-end-sanitize-d10v
Mon Jul 22 12:15:25 1996 Ian Lance Taylor <ian@cygnus.com>
* i960.h (i960_opcodes): "halt" takes an argument. From Stephen
Williams <steve@icarus.com>.
-start-sanitize-d10v
Wed Jul 17 14:46:38 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v.h: New file.
-end-sanitize-d10v
Thu Jul 11 12:09:15 1996 Jeffrey A Law (law@cygnus.com)
* h8300.h (band, bclr): Force high bit of immediate nibble to zero.
done
fi
-d10v_files="ChangeLog configure.in configure.tgt Makefile.in"
-
-if ( echo $* | grep keep\-d10v > /dev/null ) ; then
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Keeping d10v stuff in $i
- fi
- fi
- done
-else
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Removing traces of \"d10v\" from $i...
- fi
- cp $i new
- sed '/start\-sanitize\-d10v/,/end-\sanitize\-d10v/d' < $i > new
- if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
- if [ -n "${verbose}" ] ; then
- echo Caching $i in .Recover...
- fi
- mv $i .Recover
- fi
- mv new $i
- fi
- done
-fi
-
m32r_files="ChangeLog configure.tgt Makefile.in"
if ( echo $* | grep keep\-m32r > /dev/null ) ; then
+Fri Feb 14 18:28:31 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * ld.texinfo (Option Commands): Document the INCLUDE command.
+
+Thu Feb 13 20:31:37 1997 Philippe De Muyter <phdm@info.ucl.ac.be>
+
+ * configure.in: Call BFD_NEED_DECLARATION on getenv.
+ * acconfig.h (NEED_DECLARATION_GETENV): New macro.
+ * sysdep.h (getenv): Declare if NEED_DECLARATION_GETENV.
+ * ldemul.c (ld_emul_default_target): Do not cast getenv return
+ value.
+ * ldmain.c (get_emulation): Likewise.
+ * configure, config.in: Rebuild.
+
Tue Feb 11 15:34:26 1997 Ian Lance Taylor <ian@cygnus.com>
* scripttempl/elfmips.sc: When relocating, put .mips16.fn.* and
* scripttempl/elf{,mips,ppc}.sc: Add the remaining DWARF sections.
-start-sanitize-d10v
* scripttempl/elfd10v.sc: Likewise.
-end-sanitize-d10v
start-sanitize-v850
* scripttempl/v850.sc: Likewise.
end-sanitize-v850
* configure.tgt: Handle mn10300.
* emulparms/mn10300.sh: New file.
-start-sanitize-d10v
Tue Nov 5 10:57:50 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* emulparams/d10velf.sh (READONLY_START_ADDR): Changed to 0x2000004.
(EMBEDDED): Define.
-end-sanitize-d10v
Fri Nov 1 10:01:27 1996 Ian Lance Taylor <ian@cygnus.com>
* ld.texinfo: Add section on reporting bugs.
romzbss too.
end-sanitize-v850
-start-sanitize-d10v
Tue Oct 29 12:33:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* emulparams/d10velf.sh: Changes needed for D10V-EVA board.
* scripttempl/elfd10v.sc: Fix calculation of .text. Change
.stack to start at 0x2007ffe.
-end-sanitize-d10v
Mon Oct 28 15:37:00 1996 Doug Evans <dje@canuck.cygnus.com>
* configure.tgt (sparclet*-*-aout*): Delete, use sparc*-*-aout*.
the external memory region (0x100000 - 0x200000).
end-sanitize-v850
-start-sanitize-d10v
Mon Oct 21 17:16:59 1996 Michael Meissner <meissner@wogglebug.tiac.net>
* scripttempl/elfd10v.sc: Clone from elf.sc, move .text to
* Makefile.in (ed10velf.c): Depend on elfd10v.sc, not elf.sc.
-end-sanitize-d10v
start-sanitize-m32r
Fri Oct 18 22:12:49 1996 Doug Evans <dje@canuck.cygnus.com>
* emulparms/v850.sh: Fix OTHER_RELOCATING_SECTIONS.
end-sanitize-v850
-start-sanitize-d10v
Sun Sep 15 10:38:16 1996 Mark Alexander <marka@cygnus.com>
* emulparms/d10v.sh: Set OTHER_RELOCATING_SECTIONS to put
stack at top of simulator memory.
-end-sanitize-d10v
Fri Sep 13 15:49:45 1996 Ian Lance Taylor <ian@cygnus.com>
* ldlex.l (SYMBOLCHARN): Add $, _, and ~.
* genscripts.sh: Undo 8/16 change.
-start-sanitize-d10v
* emulparams/d10velf.sh (MACHINE): Explicitly set to nothing.
-end-sanitize-d10v
Fri Aug 16 19:18:08 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* genscripts.sh: Explicitly reset any shell variables set or used
names as normal environment variables by the person running
configure.
-start-sanitize-d10v
* Makefile.in (ed10velf.c): Use tdir_d10v, not tdir_arcelf.
-end-sanitize-d10v
Fri Aug 16 14:15:41 1996 James G. Smith <jsmith@cygnus.co.uk>
* scripttempl/armcoff.sc (__bss_start__, __bss_end__,
* emultempl/sunos.em (gld${EMULATION_NAME}_after_open): Move
definition of lib_path inside condition where it is used.
-start-sanitize-d10v
Wed Jul 31 13:17:10 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* emulparams/d10velf.sh: Now works with elf.sc.
* emulparams/d10velf.sh (SCRIPT_NAME): Change to vanilla.
-end-sanitize-d10v
Tue Jul 30 14:46:42 1996 Ian Lance Taylor <ian@cygnus.com>
* ldlang.c (lang_size_sections): Add the section VMA to the result
* ldlang.c (lang_place_orphans): Correct condition: place a common
section if not relocateable or if common definitions are forced.
-start-sanitize-d10v
Wed Jul 24 12:16:38 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* emulparams/d10velf.sh (SCRIPT_NAME): Change to elf.
* configure.tgt (d10v-*-elf*): New target.
* emulparams/d10velf.sh: New file.
-end-sanitize-d10v
Thu Jul 18 16:25:39 1996 Ian Lance Taylor <ian@cygnus.com>
* configure.tgt (sparc*-*-sysv4*): New target. From Andrew Gierth
\f
Local Variables:
-mode: indented-text
+mode: change-log
left-margin: 8
fill-column: 74
version-control: never
ecoff_sparc.c: $(srcdir)/emulparams/coff_sparc.sh \
$(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/sparccoff.sc ${GEN_DEPENDS}
${GENSCRIPTS} coff_sparc "$(tdir_coff_sparc)"
-# start-sanitize-d10v
ed10velf.c: $(srcdir)/emulparams/d10velf.sh \
$(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/elfd10v.sc ${GEN_DEPENDS}
${GENSCRIPTS} d10velf "$(tdir_d10v)"
-# end-sanitize-d10v
edelta68.c: $(srcdir)/emulparams/delta68.sh \
$(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/delta68.sc ${GEN_DEPENDS}
${GENSCRIPTS} delta68 "$(tdir_delta68)"
esun4.c: $(srcdir)/emulparams/sun4.sh \
$(srcdir)/emultempl/sunos.em $(srcdir)/scripttempl/aout.sc ${GEN_DEPENDS}
${GENSCRIPTS} sun4 "$(tdir_sun4)"
+# start-sanitize-tic80
+etic80coff.c: $(srcdir)/emulparams/tic80coff.sh \
+ $(srcdir)/emultempl/generic.em $(srcdir)/scripttempl/tic80coff.sc ${GEN_DEPENDS}
+ ${GENSCRIPTS} tic80coff "$(tdir_tic80coff)"
+# end-sanitize-tic80
evanilla.c: $(srcdir)/emulparams/vanilla.sh \
$(srcdir)/emultempl/vanilla.em $(srcdir)/scripttempl/vanilla.sc ${GEN_DEPENDS}
${GENSCRIPTS} vanilla "$(tdir_vanilla)"
# start-sanitize-arc
arc-*-elf*) targ_emul=arcelf ;;
# end-sanitize-arc
-# start-sanitize-d10v
d10v-*-*) targ_emul=d10velf ;;
-# end-sanitize-d10v
sparc64-*-aout*) targ_emul=sparcaout ;;
sparc64-*-elf*) targ_emul=elf64_sparc ;;
sparc-sun-sunos4*) targ_emul=sun4 ;;
mips*vr4100-*-elf*) targ_emul=elf32b4300 ;;
mips*vr5000el-*-elf*) targ_emul=elf32l4300 ;;
mips*vr5000-*-elf*) targ_emul=elf32b4300 ;;
+# start-sanitize-r5900
+mips*vr5900el-*-elf*) targ_emul=elf32l4300 ;;
+mips*vr5900-*-elf*) targ_emul=elf32b4300 ;;
+# end-sanitize-r5900
mips*el-*-elf*) targ_emul=elf32elmip ;;
mips*-*-elf*) targ_emul=elf32ebmip ;;
mips*-*-rtems*) targ_emul=elf32ebmip ;;
done
fi
-d10v_files="ChangeLog Makefile.in configure.in configure disassemble.c"
-if ( echo $* | grep keep\-d10v > /dev/null ) ; then
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Keeping d10v stuff in $i
- fi
- fi
- done
-else
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Removing traces of \"d10v\" from $i...
- fi
- cp $i new
- sed '/start\-sanitize\-d10v/,/end-\sanitize\-d10v/d' < $i > new
- if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
- if [ -n "${verbose}" ] ; then
- echo Caching $i in .Recover...
- fi
- mv $i .Recover
- fi
- mv new $i
- fi
- done
-fi
-
d30v_files="ChangeLog Makefile.in configure.in configure disassemble.c"
if ( echo $* | grep keep\-d30v > /dev/null ) ; then
for i in $d30v_files ; do
Remove private tables and use tic80_value_to_symbol function.
end-sanitize-tic80
-start-sanitize-d10v
Thu Jan 30 11:30:45 1997 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-dis.c (print_operand): Change address printing
to correctly handle PC wrapping. Fixes PR11490.
-end-sanitize-d10v
Wed Jan 29 09:39:17 1997 Jeffrey A Law (law@cygnus.com)
* mn10200-opc.c (mn10200_operands): Make 8 and 16 bit pc-relative
* tic80-opc.c: Add file.
end-sanitize-tic80
-start-sanitize-d10v
Fri Dec 20 14:30:19 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-opc.c (pre_defined_registers): Add cr[0-15], dpc, dpsw, link.
-end-sanitize-d10v
Mon Dec 16 13:00:15 1996 Jeffrey A Law (law@cygnus.com)
* mn10200-opc.c (mn10200_operands): Add SIMM16N.
list.
(mn10300_opcodes): Use REGS for register list in "movm" instructions.
-start-sanitize-d10v
Mon Nov 18 15:20:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* d10v-opc.c (d10v_opcodes): Add3 sets the carry.
-end-sanitize-d10v
Fri Nov 15 13:43:19 1996 Jeffrey A Law (law@cygnus.com)
* mn10300-opc.c (mn10300_opcodes): Demand parens around
the extended part of an instruction.
(mn10300_operands): Use new opcodes as appropriate.
-start-sanitize-d10v
Tue Nov 5 10:30:51 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-opc.c (d10v_opcodes): Declare the trap instruction
sequential so the assembler never parallelizes it with
other instructions.
-end-sanitize-d10v
Mon Nov 4 12:50:40 1996 Jeffrey A Law (law@cygnus.com)
* mn10300-opc.c (mn10300_operands): Add DN01 and AN01 for
end of the opcode table.
end-sanitize-v850
-start-sanitize-d10v
Mon Aug 26 13:35:53 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-opc.c (pre_defined_registers): Added register pairs,
"r0-r1", "r2-r3", etc.
-end-sanitize-d10v
start-sanitize-v850
Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com)
* sparc-dis.c (print_insn_sparc): Handle little endian sparcs.
-start-sanitize-d10v
Thu Aug 15 13:14:43 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-opc.c: Add additional information to the opcode
table to help determinine which instructions can be done
in parallel.
-end-sanitize-d10v
Thu Aug 15 13:11:13 1996 Stan Shebs <shebs@andros.cygnus.com>
* mpw-make.sed: Update editing of include pathnames to be
* alpha-opc.c (EV4EXTHWINDEX): Field width should be 8 not 5.
-start-sanitize-d10v
Mon Aug 12 14:30:37 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-opc.c (d10v_opcodes): Minor fixes to addi and bl.l.
* d10v-opc.c (d10v_opcodes): Correct 'mv' unit entry to EITHER.
-end-sanitize-d10v
Thu Aug 8 12:43:52 1996 Klaus Kaempf <kkaempf@progis.de>
* makefile.vms: Update for alpha-opc changes.
* i386-dis.c (print_insn_i386): Actually return the correct value.
(ONE, OP_ONE): #ifdef out; not used.
-start-sanitize-d10v
Fri Aug 2 17:47:03 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-opc.c (d10v_opcodes): Added 2 accumulator sub instructions.
Changed subi operand type to treat 0 as 16.
-end-sanitize-d10v
Wed Jul 31 16:21:41 1996 Ian Lance Taylor <ian@cygnus.com>
* m68k-opc.c: Add cpushl for the mcf5200. From Ken Rose
* arm-dis.c: (print_insn_arm): Provide decoding of the new
formats %h and %s.
-start-sanitize-d10v
Fri Jul 26 11:45:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-opc.c (d10v_operands): Added UNUM4S; a 4-bit accumulator shift.
(d10v_opcodes): Modified accumulator shift instructions to use UNUM4S.
-end-sanitize-d10v
Fri Jul 26 14:01:43 1996 Ian Lance Taylor <ian@cygnus.com>
* alpha-dis.c (print_insn_alpha_osf): Remove.
names based on info->flavour.
* disassemble.c: Always return print_insn_alpha for the alpha.
-start-sanitize-d10v
Thu Jul 25 15:24:17 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-dis.c (dis_long): Handle unknown opcodes.
* d10v-dis.c: Change all functions to use info->print_address_func.
-end-sanitize-d10v
Mon Jul 22 15:38:53 1996 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
* m68k-opc.c (m68k_opcodes): Make opcode masks for the ColdFire
move ccr/sr insns more strict so that the disassembler only
selects them when the addressing mode is data register.
-start-sanitize-d10v
Mon Jul 22 11:25:24 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* d10v-opc.c (pre_defined_registers): Declare.
* d10v-dis.c (print_operand): Now uses pre_defined_registers
to pick a better name for the registers.
-end-sanitize-d10v
Mon Jul 22 13:47:23 1996 Ian Lance Taylor <ian@cygnus.com>
* sparc-opc.c: Fix opcode values for fpack16, and fpackfix. Fix
* configure: Rebuild.
* Makefile.in (install): Use @INSTALL_SHLIB@.
-start-sanitize-d10v
- Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
+Wed Jul 17 14:39:05 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* configure: (bfd_d10v_arch) Add new case.
* configure.in: (bfd_d10v_arch) Add new case.
* d10v-opc.c: New file.
* disassemble.c (disassembler) Add entry for d10v.
-end-sanitize-d10v
Wed Jul 17 10:12:05 1996 J.T. Conklin <jtc@rtl.cygnus.com>
* m68k-opc.c (m68k_opcodes): Fix bugs in coldfire insns relating
#define ARCH_arc
/* end-sanitize-arc */
#define ARCH_arm
-/* start-sanitize-d10v */
#define ARCH_d10v
-/* end-sanitize-d10v */
/* start-sanitize-d30v */
#define ARCH_d30v
/* end-sanitize-d30v */
Do-last:
-d10v_files="configure configure.in ChangeLog"
-if ( echo $* | grep keep\-d10v > /dev/null ) ; then
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Keeping d10v stuff in $i
- fi
- fi
- done
-else
- for i in $d10v_files ; do
- if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
- if [ -n "${verbose}" ] ; then
- echo Removing traces of \"d10v\" from $i...
- fi
- cp $i new
- sed '/start\-sanitize\-d10v/,/end-\sanitize\-d10v/d' < $i > new
- if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
- if [ -n "${verbose}" ] ; then
- echo Caching $i in .Recover...
- fi
- mv $i .Recover
- fi
- mv new $i
- fi
- done
-fi
-
m32r_files="configure configure.in ChangeLog"
if ( echo $* | grep keep\-m32r > /dev/null ) ; then
for i in $m32r_files ; do
case "${target}" in
arm*-*-*) sim_target=arm ;;
-# start-sanitize-d10v
d10v-*-*) sim_target=d10v ;;
-# end-sanitize-d10v
h8300*-*-*) sim_target=h8300 ;;
h8500-*-*) sim_target=h8500 ;;
mips*-*-*)
projects / external / binutils.git / commitdiff