As schematics at [1] and [2] show C- and plus-revisions have interrupt and
headphone detection lines of ES8316 codec connected.
Add them to the respective device trees.
[1] https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi_4c_v12_sch_20200620.pdf
[2] https://dl.radxa.com/rockpi4/docs/hw/rockpi4/rockpi4b_plus_v16_sch_20200628.pdf
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20211027143726.165809-2-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
};
- sound {
+ sound: sound {
compatible = "audio-graph-card";
label = "Analog";
dais = <&i2s0_p0>;
};
};
+ es8316 {
+ hp_detect: hp-detect {
+ rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ hp_int: hp-int {
+ rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
pcie {
pcie_pwr_en: pcie-pwr-en {
rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
model = "Radxa ROCK Pi 4A+";
compatible = "radxa,rockpi4a-plus", "radxa,rockpi4", "rockchip,rk3399";
};
+
+&es8316 {
+ pinctrl-0 = <&hp_detect &hp_int>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sound {
+ hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+};
};
};
+&es8316 {
+ pinctrl-0 = <&hp_detect &hp_int>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&sdio0 {
status = "okay";
};
};
+&sound {
+ hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+};
+
&uart0 {
status = "okay";
};
};
+&es8316 {
+ pinctrl-0 = <&hp_detect &hp_int>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PA1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
&sdio0 {
status = "okay";
};
};
+&sound {
+ hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
+};
+
&uart0 {
status = "okay";