board: freescale: emc2305: Pass chip_addr to set_fan_speed
authorWasim Khan <wasim.khan@nxp.com>
Thu, 27 Aug 2020 13:43:34 +0000 (19:13 +0530)
committerPriyanka Jain <priyanka.jain@nxp.com>
Thu, 24 Sep 2020 15:27:32 +0000 (20:57 +0530)
emc2305 is a common driver. It should not use platform specific
i2c address for slave device.
Pass chip_addr as agrument to emc2305_init() and set_fan_speed()
so that emc2305 driver can be used with different platforms.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
board/freescale/common/emc2305.c
board/freescale/common/emc2305.h
board/freescale/lx2160a/lx2160a.c

index b1ca051..050b679 100644 (file)
@@ -1,8 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
- * Copyright 2018 NXP.
+ * Copyright 2018-2020 NXP.
  *
- * SPDX-License-Identifier:     GPL-2.0+
  */
 
 #include <common.h>
@@ -14,7 +13,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-void set_fan_speed(u8 data)
+void set_fan_speed(u8 data, int chip_addr)
 {
        u8 index;
        u8 Fan[NUM_OF_FANS] = {I2C_EMC2305_FAN1,
@@ -25,14 +24,14 @@ void set_fan_speed(u8 data)
 
        for (index = 0; index < NUM_OF_FANS; index++) {
 #ifndef CONFIG_DM_I2C
-               if (i2c_write(I2C_EMC2305_ADDR, Fan[index], 1, &data, 1) != 0) {
+               if (i2c_write(chip_addr, Fan[index], 1, &data, 1) != 0) {
                        printf("Error: failed to change fan speed @%x\n",
                               Fan[index]);
                }
 #else
                struct udevice *dev;
 
-               if (i2c_get_chip_for_busnum(0, I2C_EMC2305_ADDR, 1, &dev))
+               if (i2c_get_chip_for_busnum(0, chip_addr, 1, &dev))
                        continue;
 
                if (dm_i2c_write(dev, Fan[index], &data, 1) != 0) {
@@ -43,18 +42,18 @@ void set_fan_speed(u8 data)
        }
 }
 
-void emc2305_init(void)
+void emc2305_init(int chip_addr)
 {
        u8 data;
 
        data = I2C_EMC2305_CMD;
 #ifndef CONFIG_DM_I2C
-       if (i2c_write(I2C_EMC2305_ADDR, I2C_EMC2305_CONF, 1, &data, 1) != 0)
+       if (i2c_write(chip_addr, I2C_EMC2305_CONF, 1, &data, 1) != 0)
                printf("Error: failed to configure EMC2305\n");
 #else
        struct udevice *dev;
 
-       if (!i2c_get_chip_for_busnum(0, I2C_EMC2305_ADDR, 1, &dev))
+       if (!i2c_get_chip_for_busnum(0, chip_addr, 1, &dev))
                if (dm_i2c_write(dev, I2C_EMC2305_CONF, &data, 1))
                        printf("Error: failed to configure EMC2305\n");
 #endif
index eddf537..24c5410 100644 (file)
@@ -1,8 +1,7 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2018 NXP
+ * Copyright 2018-2020 NXP
  *
- * SPDX-License-Identifier:     GPL-2.0+
  */
 
 #ifndef __EMC2305_H_
@@ -17,7 +16,7 @@
 
 #define NUM_OF_FANS                    5
 
-void emc2305_init(void);
-void set_fan_speed(u8 data);
+void emc2305_init(int chip_addr);
+void set_fan_speed(u8 data, int chip_addr);
 
 #endif  /* __EMC2305_H_ */
index ace2a19..0ff987e 100644 (file)
@@ -114,8 +114,8 @@ int board_early_init_f(void)
 
 #ifdef CONFIG_EMC2305
        select_i2c_ch_pca9547(I2C_MUX_CH_EMC2305);
-       emc2305_init();
-       set_fan_speed(I2C_EMC2305_PWM);
+       emc2305_init(I2C_EMC2305_ADDR);
+       set_fan_speed(I2C_EMC2305_PWM, I2C_EMC2305_ADDR);
        select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
 #endif