ARCv2: perf: Ensure perf intr gets enabled on all cores

This was the second perf intr issue

perf sampling on multicore requires intr to be enabled on all cores.
ARC perf probe code used helper arc_request_percpu_irq() which calls
 - request_percpu_irq() on core0
 - enable_percpu_irq() on all all cores (including core0)

genirq requires that request be made ahead of enable call.
However if perf probe happened on non core0 (observed on a 3.18 kernel),
enable would get called ahead of request, failing obviously and
rendering perf intr disabled on all such cores

[   11.120000] 1 ARC perf       : 8 counters (48 bits), 113 conditions, [overflow IRQ support]
[   11.130000] 1 -----> enable_percpu_irq() IRQ 20 failed
[   11.140000] 3 -----> enable_percpu_irq() IRQ 20 failed
[   11.140000] 2 -----> enable_percpu_irq() IRQ 20 failed
[   11.140000] 0 =====> request_percpu_irq() IRQ 20
[   11.140000] 0 -----> enable_percpu_irq() IRQ 20

Fix this fragility, by calling request_percpu_irq() on whatever core
calls probe (there is no requirement on which core calls this anyways)
and then calling enable on each cores.

Interestingly this started as invesigation of STAR 9000838902:
"sporadically IRQs enabled on perf prob"

which was about occassional boot spew as request_percpu_irq got called
non-locally (from an IPI), and re-enabled interrupts in following path
proc_mkdir ->  spin_unlock_irq()

which the irq work code didn't like.

| ARC perf     : 8 counters (48 bits), 113 conditions, [overflow IRQ support]
|
| BUG: failure at ../kernel/irq_work.c:135/irq_work_run_list()!
| CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.10-01127-g285efb8e66d1 #2
|
| Stack Trace:
|  arc_unwind_core.constprop.1+0x94/0x104
|  dump_stack+0x62/0x98
|  irq_work_run_list+0xb0/0xb4
|  irq_work_run+0x22/0x3c
|  do_IPI+0x74/0x9c
|  handle_irq_event_percpu+0x34/0x164
|  handle_percpu_irq+0x58/0x78
|  generic_handle_irq+0x1e/0x2c
|  arch_do_IRQ+0x3c/0x60
|  ret_from_exception+0x0/0x8

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-snps-arc@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: <stable@vger.kernel.org> #4.2+
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

diff --git a/arch/arc/kernel/perf_event.c b/arch/arc/kernel/perf_event.c
index 0c08bb1..8b134cf 100644 (file)
--- a/arch/arc/kernel/perf_event.c
+++ b/arch/arc/kernel/perf_event.c
@@ -428,12 +428,11 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev)
 
 #endif /* CONFIG_ISA_ARCV2 */
 
-void arc_cpu_pmu_irq_init(void)
+static void arc_cpu_pmu_irq_init(void *data)
 {
-       struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
+       int irq = *(int *)data;
 
-       arc_request_percpu_irq(arc_pmu->irq, smp_processor_id(), arc_pmu_intr,
-                              "ARC perf counters", pmu_cpu);
+       enable_percpu_irq(irq, IRQ_TYPE_NONE);
 
        /* Clear all pending interrupt flags */
        write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff);
@@ -515,7 +514,6 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 
        if (has_interrupts) {
                int irq = platform_get_irq(pdev, 0);
-               unsigned long flags;
 
                if (irq < 0) {
                        pr_err("Cannot get IRQ number for the platform\n");
@@ -524,24 +522,12 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 
                arc_pmu->irq = irq;
 
-               /*
-                * arc_cpu_pmu_irq_init() needs to be called on all cores for
-                * their respective local PMU.
-                * However we use opencoded on_each_cpu() to ensure it is called
-                * on core0 first, so that arc_request_percpu_irq() sets up
-                * AUTOEN etc. Otherwise enable_percpu_irq() fails to enable
-                * perf IRQ on non master cores.
-                * see arc_request_percpu_irq()
-                */
-               preempt_disable();
-               local_irq_save(flags);
-               arc_cpu_pmu_irq_init();
-               local_irq_restore(flags);
-               smp_call_function((smp_call_func_t)arc_cpu_pmu_irq_init, 0, 1);
-               preempt_enable();
-
-               /* Clean all pending interrupt flags */
-               write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff);
+               /* intc map function ensures irq_set_percpu_devid() called */
+               request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters",
+                                  this_cpu_ptr(&arc_pmu_cpu));
+
+               on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1);
+
        } else
                arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;