arm: Tegra2: GPIO: Add basic GPIO definitions
authorTom Warren <twarren.nvidia@gmail.com>
Thu, 14 Apr 2011 12:09:40 +0000 (12:09 +0000)
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>
Wed, 27 Apr 2011 17:38:10 +0000 (19:38 +0200)
Signed-off-by: Tom Warren <twarren@nvidia.com>
arch/arm/include/asm/arch-tegra2/gpio.h [new file with mode: 0644]
arch/arm/include/asm/arch-tegra2/tegra2.h

diff --git a/arch/arm/include/asm/arch-tegra2/gpio.h b/arch/arm/include/asm/arch-tegra2/gpio.h
new file mode 100644 (file)
index 0000000..0fb8f0d
--- /dev/null
@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2011, Google Inc. All rights reserved.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA2_GPIO_H_
+#define _TEGRA2_GPIO_H_
+
+/*
+ * The Tegra 2x GPIO controller has 222 GPIOs arranged in 8 banks of 4 ports,
+ * each with 8 GPIOs.
+ */
+#define TEGRA_GPIO_PORTS 4   /* The number of ports per bank */
+#define TEGRA_GPIO_BANKS 8   /* The number of banks */
+
+/* GPIO Controller registers for a single bank */
+struct gpio_ctlr_bank {
+       uint gpio_config[TEGRA_GPIO_PORTS];
+       uint gpio_dir_out[TEGRA_GPIO_PORTS];
+       uint gpio_out[TEGRA_GPIO_PORTS];
+       uint gpio_in[TEGRA_GPIO_PORTS];
+       uint gpio_int_status[TEGRA_GPIO_PORTS];
+       uint gpio_int_enable[TEGRA_GPIO_PORTS];
+       uint gpio_int_level[TEGRA_GPIO_PORTS];
+       uint gpio_int_clear[TEGRA_GPIO_PORTS];
+};
+
+struct gpio_ctlr {
+       struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS];
+};
+
+#define GPIO_BANK(x)   ((x) >> 5)
+#define GPIO_PORT(x)   (((x) >> 3) & 0x3)
+#define GPIO_BIT(x)    ((x) & 0x7)
+
+/*
+ * GPIO_PI3 = Port I = 8, bit = 3.
+ * Seaboard: used for UART/SPI selection
+ * Harmony: not used
+ */
+#define GPIO_PI3       ((8 << 3) | 3)
+
+#endif /* TEGRA2_GPIO_H_ */
index 7b0f5cc..742a75a 100644 (file)
@@ -30,6 +30,7 @@
 #define NV_PA_TMRUS_BASE       0x60005010
 #define NV_PA_CLK_RST_BASE     0x60006000
 #define NV_PA_FLOW_BASE                0x60007000
+#define NV_PA_GPIO_BASE                0x6000D000
 #define NV_PA_EVP_BASE         0x6000F000
 #define NV_PA_APB_MISC_BASE    0x70000000
 #define NV_PA_APB_UARTA_BASE   (NV_PA_APB_MISC_BASE + 0x6000)