MII functions calls.
authorTsiChungLiew <Tsi-Chung.Liew@freescale.com>
Fri, 6 Jul 2007 03:56:19 +0000 (22:56 -0500)
committerJohn Rigby <jrigby@freescale.com>
Tue, 10 Jul 2007 20:29:09 +0000 (14:29 -0600)
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
board/freescale/m5329evb/mii.c [new file with mode: 0644]

diff --git a/board/freescale/m5329evb/mii.c b/board/freescale/m5329evb/mii.c
new file mode 100644 (file)
index 0000000..691b144
--- /dev/null
@@ -0,0 +1,304 @@
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fec.h>
+#include <asm/immap.h>
+
+#include <config.h>
+#include <net.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#undef MII_DEBUG
+#undef ET_DEBUG
+
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+       volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+       if (setclear) {
+               gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
+               gpio->par_feci2c |=
+                   GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO;
+       } else {
+               gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
+               gpio->par_feci2c &=
+                   ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
+       }
+       return 0;
+}
+
+#if defined(CFG_DISCOVER_PHY) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#include <miiphy.h>
+
+/* Make MII read/write commands for the FEC. */
+#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
+
+#define mk_mii_write(ADDR, REG, VAL)   (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
+
+/* PHY identification */
+#define PHY_ID_LXT970          0x78100000      /* LXT970 */
+#define PHY_ID_LXT971          0x001378e0      /* LXT971 and 972 */
+#define PHY_ID_82555           0x02a80150      /* Intel 82555 */
+#define PHY_ID_QS6612          0x01814400      /* QS6612 */
+#define PHY_ID_AMD79C784       0x00225610      /* AMD 79C784 */
+#define PHY_ID_LSI80225                0x0016f870      /* LSI 80225 */
+#define PHY_ID_LSI80225B       0x0016f880      /* LSI 80225/B */
+#define PHY_ID_DP83848VV       0x20005C90      /* National 83848 */
+#define PHY_ID_DP83849         0x20005CA2      /* National 82849 */
+
+#define STR_ID_LXT970          "LXT970"
+#define STR_ID_LXT971          "LXT971"
+#define STR_ID_82555           "Intel82555"
+#define STR_ID_QS6612          "QS6612"
+#define STR_ID_AMD79C784       "AMD79C784"
+#define STR_ID_LSI80225                "LSI80225"
+#define STR_ID_LSI80225B       "LSI80225/B"
+#define STR_ID_DP83848VV       "N83848"
+#define STR_ID_DP83849         "N83849"
+
+/****************************************************************************
+ * mii_init -- Initialize the MII for MII command without ethernet
+ * This function is a subset of eth_init
+ ****************************************************************************
+ */
+void mii_reset(struct fec_info_s *info)
+{
+       volatile fec_t *fecp = (fec_t *) (info->miibase);
+       int i;
+
+       fecp->ecr = FEC_ECR_RESET;
+       for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
+               udelay(1);
+       }
+       if (i == FEC_RESET_DELAY) {
+               printf("FEC_RESET_DELAY timeout\n");
+       }
+}
+
+/* send command to phy using mii, wait for result */
+uint mii_send(uint mii_cmd)
+{
+       struct fec_info_s *info;
+       struct eth_device *dev;
+       volatile fec_t *ep;
+       uint mii_reply;
+       int j = 0;
+
+       /* retrieve from register structure */
+       dev = eth_get_dev();
+       info = dev->priv;
+
+       ep = (fec_t *) info->miibase;
+
+       ep->mmfr = mii_cmd;     /* command to phy */
+
+       /* wait for mii complete */
+       while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
+               udelay(1);
+               j++;
+       }
+       if (j >= MCFFEC_TOUT_LOOP) {
+               printf("MII not complete\n");
+               return -1;
+       }
+
+       mii_reply = ep->mmfr;   /* result from phy */
+       ep->eir = FEC_EIR_MII;  /* clear MII complete */
+#ifdef ET_DEBUG
+       printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
+              __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
+#endif
+
+       return (mii_reply & 0xffff);    /* data read from phy */
+}
+#endif                         /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CFG_CMD_MII) */
+
+#if defined(CFG_DISCOVER_PHY)
+int mii_discover_phy(struct eth_device *dev)
+{
+#define MAX_PHY_PASSES 11
+       struct fec_info_s *info = dev->priv;
+       int phyaddr, pass;
+       uint phyno, phytype;
+
+       if (info->phyname_init)
+               return info->phy_addr;
+
+       phyaddr = -1;           /* didn't find a PHY yet */
+       for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
+               if (pass > 1) {
+                       /* PHY may need more time to recover from reset.
+                        * The LXT970 needs 50ms typical, no maximum is
+                        * specified, so wait 10ms before try again.
+                        * With 11 passes this gives it 100ms to wake up.
+                        */
+                       udelay(10000);  /* wait 10ms */
+               }
+
+               for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
+
+                       phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
+#ifdef ET_DEBUG
+                       printf("PHY type 0x%x pass %d type\n", phytype, pass);
+#endif
+                       if (phytype != 0xffff) {
+                               phyaddr = phyno;
+                               phytype <<= 16;
+                               phytype |=
+                                   mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+
+                               switch (phytype & 0xffffffff) {
+                               case PHY_ID_DP83848VV:
+                                       strcpy(info->phy_name,
+                                              STR_ID_DP83848VV);
+                                       info->phyname_init = 1;
+                                       break;
+                               default:
+                                       strcpy(info->phy_name, "unknown");
+                                       info->phyname_init = 1;
+                                       break;
+                               }
+
+#ifdef ET_DEBUG
+                               printf("PHY @ 0x%x pass %d type ", phyno, pass);
+                               switch (phytype & 0xffffffff) {
+                               case PHY_ID_DP83848VV:
+                                       printf(STR_ID_DP83848VV);
+                                       break;
+                               default:
+                                       printf("0x%08x\n", phytype);
+                                       break;
+                               }
+#endif
+                       }
+               }
+       }
+       if (phyaddr < 0)
+               printf("No PHY device found.\n");
+
+       return phyaddr;
+}
+#endif                         /* CFG_DISCOVER_PHY */
+
+void mii_init(void)
+{
+       volatile fec_t *fecp;
+       struct fec_info_s *info;
+       struct eth_device *dev;
+       int miispd = 0, i = 0;
+       u16 autoneg = 0;
+
+       /* retrieve from register structure */
+       dev = eth_get_dev();
+       info = dev->priv;
+
+       fecp = (fec_t *) info->miibase;
+
+       fecpin_setclear(dev, 1);
+
+       mii_reset(info);
+
+       /* We use strictly polling mode only */
+       fecp->eimr = 0;
+
+       /* Clear any pending interrupt */
+       fecp->eir = 0xffffffff;
+
+       /* Set MII speed */
+       miispd = (gd->bus_clk / 1000000) / 5;
+       fecp->mscr = miispd << 1;
+
+       info->phy_addr = mii_discover_phy(dev);
+
+#define AUTONEGLINK            (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
+       while (i < MCFFEC_TOUT_LOOP) {
+               autoneg = 0;
+               miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
+               i++;
+
+               if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
+                       break;
+
+               udelay(500);
+       }
+       if (i >= MCFFEC_TOUT_LOOP) {
+               printf("Auto Negotiation not complete\n");
+       }
+
+       /* adapt to the half/full speed settings */
+       info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
+       info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
+}
+
+/*****************************************************************************
+ * Read and write a MII PHY register, routines used by MII Utilities
+ *
+ * FIXME: These routines are expected to return 0 on success, but mii_send
+ *       does _not_ return an error code. Maybe 0xFFFF means error, i.e.
+ *       no PHY connected...
+ *       For now always return 0.
+ * FIXME: These routines only work after calling eth_init() at least once!
+ *       Otherwise they hang in mii_send() !!! Sorry!
+ *****************************************************************************/
+
+int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
+                      unsigned short *value)
+{
+       short rdreg;            /* register working value */
+
+#ifdef MII_DEBUG
+       printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
+#endif
+       rdreg = mii_send(mk_mii_read(addr, reg));
+
+       *value = rdreg;
+
+#ifdef MII_DEBUG
+       printf("0x%04x\n", *value);
+#endif
+
+       return 0;
+}
+
+int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
+                       unsigned short value)
+{
+       short rdreg;            /* register working value */
+
+#ifdef MII_DEBUG
+       printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
+#endif
+
+       rdreg = mii_send(mk_mii_write(addr, reg, value));
+
+#ifdef MII_DEBUG
+       printf("0x%04x\n", value);
+#endif
+
+       return 0;
+}
+
+#endif                         /* CFG_CMD_NET, FEC_ENET & NET_MULTI */