hw: Don't use hw_error() for machine initialization errors

Printing CPU registers is not helpful during machine initialization.
Moreover, these are straightforward configuration or "can get
resources" errors, so dumping core isn't appropriate either.  Replace
hw_error() by error_report(); exit(1).  Matches how we report these
errors in other machine initializations.

Cc: Richard Henderson <rth@twiddle.net>
Cc: qemu-arm@nongnu.org
Cc: qemu-ppc@nongnu.org
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1450370121-5768-2-git-send-email-armbru@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>

diff --git a/hw/alpha/dp264.c b/hw/alpha/dp264.c
index 27bdaa1..38b85ba 100644 (file)
--- a/hw/alpha/dp264.c
+++ b/hw/alpha/dp264.c
@@ -11,6 +11,7 @@
 #include "hw/loader.h"
 #include "hw/boards.h"
 #include "alpha_sys.h"
+#include "qemu/error-report.h"
 #include "sysemu/sysemu.h"
 #include "hw/timer/mc146818rtc.h"
 #include "hw/ide.h"
@@ -104,14 +105,14 @@ static void clipper_init(MachineState *machine)
     palcode_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS,
                                 bios_name ? bios_name : "palcode-clipper");
     if (palcode_filename == NULL) {
-        hw_error("no palcode provided\n");
+        error_report("no palcode provided");
         exit(1);
     }
     size = load_elf(palcode_filename, cpu_alpha_superpage_to_phys,
                     NULL, &palcode_entry, &palcode_low, &palcode_high,
                     0, EM_ALPHA, 0);
     if (size < 0) {
-        hw_error("could not load palcode '%s'\n", palcode_filename);
+        error_report("could not load palcode '%s'", palcode_filename);
         exit(1);
     }
     g_free(palcode_filename);
@@ -131,7 +132,7 @@ static void clipper_init(MachineState *machine)
                         NULL, &kernel_entry, &kernel_low, &kernel_high,
                         0, EM_ALPHA, 0);
         if (size < 0) {
-            hw_error("could not load kernel '%s'\n", kernel_filename);
+            error_report("could not load kernel '%s'", kernel_filename);
             exit(1);
         }
 
@@ -148,8 +149,8 @@ static void clipper_init(MachineState *machine)
 
             initrd_size = get_image_size(initrd_filename);
             if (initrd_size < 0) {
-                hw_error("could not load initial ram disk '%s'\n",
-                         initrd_filename);
+                error_report("could not load initial ram disk '%s'",
+                             initrd_filename);
                 exit(1);
             }
 

diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c
index a0a5a06..cb9926e 100644 (file)
--- a/hw/arm/highbank.c
+++ b/hw/arm/highbank.c
@@ -315,11 +315,13 @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id)
         sysboot_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
         if (sysboot_filename != NULL) {
             if (load_image_targphys(sysboot_filename, 0xfff88000, 0x8000) < 0) {
-                hw_error("Unable to load %s\n", bios_name);
+                error_report("Unable to load %s", bios_name);
+                exit(1);
             }
             g_free(sysboot_filename);
         } else {
-           hw_error("Unable to find %s\n", bios_name);
+            error_report("Unable to find %s", bios_name);
+            exit(1);
         }
     }
 

diff --git a/hw/char/exynos4210_uart.c b/hw/char/exynos4210_uart.c
index 215f962..2736b37 100644 (file)
--- a/hw/char/exynos4210_uart.c
+++ b/hw/char/exynos4210_uart.c
@@ -20,6 +20,7 @@
  */
 
 #include "hw/sysbus.h"
+#include "qemu/error-report.h"
 #include "sysemu/sysemu.h"
 #include "sysemu/char.h"
 
@@ -595,15 +596,17 @@ DeviceState *exynos4210_uart_create(hwaddr addr,
 
     if (!chr) {
         if (channel >= MAX_SERIAL_PORTS) {
-            hw_error("Only %d serial ports are supported by QEMU.\n",
-                     MAX_SERIAL_PORTS);
+            error_report("Only %d serial ports are supported by QEMU",
+                         MAX_SERIAL_PORTS);
+            exit(1);
         }
         chr = serial_hds[channel];
         if (!chr) {
             snprintf(label, ARRAY_SIZE(label), "%s%d", chr_name, channel);
             chr = qemu_chr_new(label, "null", NULL);
             if (!(chr)) {
-                hw_error("Can't assign serial port to UART%d.\n", channel);
+                error_report("Can't assign serial port to UART%d", channel);
+                exit(1);
             }
         }
     }

diff --git a/hw/m68k/an5206.c b/hw/m68k/an5206.c
index c1dea17..8d9ccaa 100644 (file)
--- a/hw/m68k/an5206.c
+++ b/hw/m68k/an5206.c
@@ -12,6 +12,7 @@
 #include "hw/loader.h"
 #include "elf.h"
 #include "exec/address-spaces.h"
+#include "qemu/error-report.h"
 #include "sysemu/qtest.h"
 
 #define KERNEL_LOAD_ADDR 0x10000
@@ -39,7 +40,8 @@ static void an5206_init(MachineState *machine)
     }
     cpu = cpu_m68k_init(cpu_model);
     if (!cpu) {
-        hw_error("Unable to find m68k CPU definition\n");
+        error_report("Unable to find m68k CPU definition");
+        exit(1);
     }
     env = &cpu->env;
 

diff --git a/hw/ppc/mac_newworld.c b/hw/ppc/mac_newworld.c
index 1b9a573..ca3d6a8 100644 (file)
--- a/hw/ppc/mac_newworld.c
+++ b/hw/ppc/mac_newworld.c
@@ -62,6 +62,7 @@
 #include "hw/ide.h"
 #include "hw/loader.h"
 #include "elf.h"
+#include "qemu/error-report.h"
 #include "sysemu/kvm.h"
 #include "kvm_ppc.h"
 #include "hw/usb.h"
@@ -226,7 +227,7 @@ static void ppc_core99_init(MachineState *machine)
         bios_size = -1;
     }
     if (bios_size < 0 || bios_size > BIOS_SIZE) {
-        hw_error("qemu: could not load PowerPC bios '%s'\n", bios_name);
+        error_report("could not load PowerPC bios '%s'", bios_name);
         exit(1);
     }
 
@@ -252,7 +253,7 @@ static void ppc_core99_init(MachineState *machine)
                                               kernel_base,
                                               ram_size - kernel_base);
         if (kernel_size < 0) {
-            hw_error("qemu: could not load kernel '%s'\n", kernel_filename);
+            error_report("could not load kernel '%s'", kernel_filename);
             exit(1);
         }
         /* load initrd */
@@ -261,8 +262,8 @@ static void ppc_core99_init(MachineState *machine)
             initrd_size = load_image_targphys(initrd_filename, initrd_base,
                                               ram_size - initrd_base);
             if (initrd_size < 0) {
-                hw_error("qemu: could not load initial ram disk '%s'\n",
-                         initrd_filename);
+                error_report("could not load initial ram disk '%s'",
+                             initrd_filename);
                 exit(1);
             }
             cmdline_base = round_page(initrd_base + initrd_size);
@@ -344,7 +345,7 @@ static void ppc_core99_init(MachineState *machine)
             break;
 #endif /* defined(TARGET_PPC64) */
         default:
-            hw_error("Bus model not supported on mac99 machine\n");
+            error_report("Bus model not supported on mac99 machine");
             exit(1);
         }
     }

diff --git a/hw/ppc/mac_oldworld.c b/hw/ppc/mac_oldworld.c
index 21eaf0e..c3f9fe3 100644 (file)
--- a/hw/ppc/mac_oldworld.c
+++ b/hw/ppc/mac_oldworld.c
@@ -38,6 +38,7 @@
 #include "hw/ide.h"
 #include "hw/loader.h"
 #include "elf.h"
+#include "qemu/error-report.h"
 #include "sysemu/kvm.h"
 #include "kvm_ppc.h"
 #include "sysemu/block-backend.h"
@@ -153,7 +154,7 @@ static void ppc_heathrow_init(MachineState *machine)
         bios_size = -1;
     }
     if (bios_size < 0 || bios_size > BIOS_SIZE) {
-        hw_error("qemu: could not load PowerPC bios '%s'\n", bios_name);
+        error_report("could not load PowerPC bios '%s'", bios_name);
         exit(1);
     }
 
@@ -178,8 +179,7 @@ static void ppc_heathrow_init(MachineState *machine)
                                               kernel_base,
                                               ram_size - kernel_base);
         if (kernel_size < 0) {
-            hw_error("qemu: could not load kernel '%s'\n",
-                      kernel_filename);
+            error_report("could not load kernel '%s'", kernel_filename);
             exit(1);
         }
         /* load initrd */
@@ -188,8 +188,8 @@ static void ppc_heathrow_init(MachineState *machine)
             initrd_size = load_image_targphys(initrd_filename, initrd_base,
                                               ram_size - initrd_base);
             if (initrd_size < 0) {
-                hw_error("qemu: could not load initial ram disk '%s'\n",
-                         initrd_filename);
+                error_report("could not load initial ram disk '%s'",
+                             initrd_filename);
                 exit(1);
             }
             cmdline_base = round_page(initrd_base + initrd_size);
@@ -246,7 +246,8 @@ static void ppc_heathrow_init(MachineState *machine)
                 ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
             break;
         default:
-            hw_error("Bus model not supported on OldWorld Mac machine\n");
+            error_report("Bus model not supported on OldWorld Mac machine");
+            exit(1);
         }
     }
 
@@ -259,7 +260,8 @@ static void ppc_heathrow_init(MachineState *machine)
 
     /* init basic PC hardware */
     if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) {
-        hw_error("Only 6xx bus is supported on heathrow machine\n");
+        error_report("Only 6xx bus is supported on heathrow machine");
+        exit(1);
     }
     pic = heathrow_pic_init(&pic_mem, 1, heathrow_irqs);
     pci_bus = pci_grackle_init(0xfec00000, pic,

diff --git a/hw/ppc/prep.c b/hw/ppc/prep.c
index 5ad28f7..0e102fc 100644 (file)
--- a/hw/ppc/prep.c
+++ b/hw/ppc/prep.c
@@ -33,6 +33,7 @@
 #include "hw/pci/pci_host.h"
 #include "hw/ppc/ppc.h"
 #include "hw/boards.h"
+#include "qemu/error-report.h"
 #include "qemu/log.h"
 #include "hw/ide.h"
 #include "hw/loader.h"
@@ -532,7 +533,7 @@ static void ppc_prep_init(MachineState *machine)
         kernel_size = load_image_targphys(kernel_filename, kernel_base,
                                           ram_size - kernel_base);
         if (kernel_size < 0) {
-            hw_error("qemu: could not load kernel '%s'\n", kernel_filename);
+            error_report("could not load kernel '%s'", kernel_filename);
             exit(1);
         }
         /* load initrd */
@@ -541,8 +542,9 @@ static void ppc_prep_init(MachineState *machine)
             initrd_size = load_image_targphys(initrd_filename, initrd_base,
                                               ram_size - initrd_base);
             if (initrd_size < 0) {
-                hw_error("qemu: could not load initial ram disk '%s'\n",
-                          initrd_filename);
+                error_report("could not load initial ram disk '%s'",
+                             initrd_filename);
+                exit(1);
             }
         } else {
             initrd_base = 0;
@@ -569,7 +571,8 @@ static void ppc_prep_init(MachineState *machine)
     }
 
     if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) {
-        hw_error("Only 6xx bus is supported on PREP machine\n");
+        error_report("Only 6xx bus is supported on PREP machine");
+        exit(1);
     }
 
     dev = qdev_create(NULL, "raven-pcihost");

diff --git a/hw/unicore32/puv3.c b/hw/unicore32/puv3.c
index 91117b2..1968202 100644 (file)
--- a/hw/unicore32/puv3.c
+++ b/hw/unicore32/puv3.c
@@ -17,6 +17,7 @@
 #include "hw/boards.h"
 #include "hw/loader.h"
 #include "hw/i386/pc.h"
+#include "qemu/error-report.h"
 #include "sysemu/qtest.h"
 
 #undef DEBUG_PUV3
@@ -95,7 +96,8 @@ static void puv3_load_kernel(const char *kernel_filename)
     size = load_image_targphys(kernel_filename, KERNEL_LOAD_ADDR,
             KERNEL_MAX_SIZE);
     if (size < 0) {
-        hw_error("Load kernel error: '%s'\n", kernel_filename);
+        error_report("Load kernel error: '%s'", kernel_filename);
+        exit(1);
     }
 
     /* cheat curses that we have a graphic console, only under ocd console */
@@ -112,7 +114,8 @@ static void puv3_init(MachineState *machine)
     UniCore32CPU *cpu;
 
     if (initrd_filename) {
-        hw_error("Please use kernel built-in initramdisk.\n");
+        error_report("Please use kernel built-in initramdisk");
+        exit(1);
     }
 
     if (!cpu_model) {
@@ -121,7 +124,8 @@ static void puv3_init(MachineState *machine)
 
     cpu = uc32_cpu_init(cpu_model);
     if (!cpu) {
-        hw_error("Unable to find CPU definition\n");
+        error_report("Unable to find CPU definition");
+        exit(1);
     }
     env = &cpu->env;