struct hal_com_data *pHalData = GET_HAL_DATA(padapter);
u8 rfPath, rate;
- for (rfPath = 0; rfPath < TX_PWR_BY_RATE_NUM_RF; ++rfPath)
+ for (rfPath = RF_PATH_A; rfPath < MAX_RF_PATH_NUM; ++rfPath)
for (rate = 0; rate < TX_PWR_BY_RATE_NUM_RATE; ++rate)
pHalData->TxPwrByRateOffset[rfPath][rate] = 0;
}
u8 TxPwrInPercentage;
u8 TxPwrCalibrateRate;
- /* TX power by rate table at most 4RF path. */
- /* The register is */
- /* VHT TX power by rate off setArray = */
- /* RF: at most 4*4 = ABCD = 0/1/2/3 */
- /* CCK = 0 OFDM = 1/2 HT-MCS 0-15 =3/4/56 VHT =7/8/9/10/11 */
+ /* TX power by rate table */
+ /* RF: at most 2 = AB = 0/1 */
+ /* CCK = 0 OFDM = 1 HT-MCS 0-7 = 2 */
u8 TxPwrByRateTable;
u8 TxPwrByRateBand;
- s8 TxPwrByRateOffset[TX_PWR_BY_RATE_NUM_RF][TX_PWR_BY_RATE_NUM_RATE];
+ s8 TxPwrByRateOffset[MAX_RF_PATH_NUM][TX_PWR_BY_RATE_NUM_RATE];
/* */
/* 2 Power Limit Table */
[MAX_RF_PATH_NUM];
/* Store the original power by rate value of the base of each rate section of rf path A & B */
- u8 TxPwrByRateBase2_4G[TX_PWR_BY_RATE_NUM_RF][MAX_BASE_NUM_IN_PHY_REG_PG_2_4G];
+ u8 TxPwrByRateBase2_4G[MAX_RF_PATH_NUM][MAX_BASE_NUM_IN_PHY_REG_PG_2_4G];
/* For power group */
u8 PwrGroupHT20[RF_PATH_MAX_92C_88E][CHANNEL_MAX_NUMBER];
*/
#define MAX_TX_COUNT 4
-/* For VHT series TX power by rate table. */
-/* VHT TX power by rate off setArray = */
-/* RF: at most 4*4 = ABCD = 0/1/2/3 */
-/* CCK = 0 OFDM = 1/2 HT-MCS 0-15 =3/4/56 VHT =7/8/9/10/11 */
-#define TX_PWR_BY_RATE_NUM_RF 4
+/* TX power by rate table. */
+/* RF: = AB = 0/1 */
+/* CCK = 0 OFDM = 1 HT-MCS 0-7 = 2 */
#define TX_PWR_BY_RATE_NUM_RATE 84
#define MAX_RF_PATH_NUM 2
#define MAX_CHNL_GROUP_24G 6