Since commit
0166dc11be91 ("of: make CONFIG_OF user selectable"), it
is possible to test-build any driver which depends on OF on any
architecture by explicitly selecting OF. Therefore depending on
COMPILE_TEST as an alternative is no longer needed.
It is actually better to always build such drivers with OF enabled,
so that the test builds are closer to how each driver will actually be
built on its intended target. Building them without OF may not test
much as the compiler will optimize out potentially large parts of the
code. In the worst case, this could even pop false positive warnings.
Dropping COMPILE_TEST here improves the quality of our testing and
avoids wasting time on non-existent issues.
As a minor optimization, this also lets us drop several occurrences of
of_match_ptr(), __maybe_unused and some ifdef guarding, as we now know
what all of this will resolve to, we might as well save cpp some work.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Icenowy Zheng <icenowy@aosc.io>
Link: https://lore.kernel.org/r/20221124144708.64371b98@endymion.delvare
Signed-off-by: Mark Brown <broonie@kernel.org>
config REGULATOR_FAN53880
tristate "Fairchild FAN53880 Regulator"
- depends on I2C && (OF || COMPILE_TEST)
+ depends on I2C && OF
select REGMAP_I2C
help
This driver supports Fairchild (ON Semiconductor) FAN53880
config REGULATOR_MP886X
tristate "MPS MP8869 regulator driver"
- depends on I2C && (OF || COMPILE_TEST)
+ depends on I2C && OF
select REGMAP_I2C
help
This driver supports the MP8869 voltage regulator.
config REGULATOR_SY8106A
tristate "Silergy SY8106A regulator"
- depends on I2C && (OF || COMPILE_TEST)
+ depends on I2C && OF
select REGMAP_I2C
help
This driver supports SY8106A single output regulator.
config REGULATOR_SY8824X
tristate "Silergy SY8824C/SY8824E regulator"
- depends on I2C && (OF || COMPILE_TEST)
+ depends on I2C && OF
select REGMAP_I2C
help
This driver supports SY8824C single output regulator.
config REGULATOR_SY8827N
tristate "Silergy SY8827N regulator"
- depends on I2C && (OF || COMPILE_TEST)
+ depends on I2C && OF
select REGMAP_I2C
help
This driver supports SY8827N single output regulator.
#define FAN53880_LDO(_num, _supply, _default) \
[FAN53880_LDO ## _num] = { \
.name = "LDO"#_num, \
- .of_match = of_match_ptr("LDO"#_num), \
- .regulators_node = of_match_ptr("regulators"), \
+ .of_match = "LDO"#_num, \
+ .regulators_node = "regulators", \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.linear_ranges = (struct linear_range[]) { \
FAN53880_LDO(4, "VIN4", 1800000),
[FAN53880_BUCK] = {
.name = "BUCK",
- .of_match = of_match_ptr("BUCK"),
- .regulators_node = of_match_ptr("regulators"),
+ .of_match = "BUCK",
+ .regulators_node = "regulators",
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.linear_ranges = (struct linear_range[]) {
},
[FAN53880_BOOST] = {
.name = "BOOST",
- .of_match = of_match_ptr("BOOST"),
- .regulators_node = of_match_ptr("regulators"),
+ .of_match = "BOOST",
+ .regulators_node = "regulators",
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.linear_ranges = (struct linear_range[]) {
return 0;
}
-#ifdef CONFIG_OF
static const struct of_device_id fan53880_dt_ids[] = {
{ .compatible = "onnn,fan53880", },
{}
};
MODULE_DEVICE_TABLE(of, fan53880_dt_ids);
-#endif
static const struct i2c_device_id fan53880_i2c_id[] = {
{ "fan53880", },
static struct i2c_driver fan53880_regulator_driver = {
.driver = {
.name = "fan53880",
- .of_match_table = of_match_ptr(fan53880_dt_ids),
+ .of_match_table = fan53880_dt_ids,
},
.probe_new = fan53880_i2c_probe,
.id_table = fan53880_i2c_id,
static struct i2c_driver mp886x_regulator_driver = {
.driver = {
.name = "mp886x-regulator",
- .of_match_table = of_match_ptr(mp886x_dt_ids),
+ .of_match_table = mp886x_dt_ids,
},
.probe_new = mp886x_i2c_probe,
.id_table = mp886x_id,
return 0;
}
-static const struct of_device_id __maybe_unused sy8106a_i2c_of_match[] = {
+static const struct of_device_id sy8106a_i2c_of_match[] = {
{ .compatible = "silergy,sy8106a" },
{ },
};
static struct i2c_driver sy8106a_regulator_driver = {
.driver = {
.name = "sy8106a",
- .of_match_table = of_match_ptr(sy8106a_i2c_of_match),
+ .of_match_table = sy8106a_i2c_of_match,
},
.probe_new = sy8106a_i2c_probe,
.id_table = sy8106a_i2c_id,
static struct i2c_driver sy8824_regulator_driver = {
.driver = {
.name = "sy8824-regulator",
- .of_match_table = of_match_ptr(sy8824_dt_ids),
+ .of_match_table = sy8824_dt_ids,
},
.probe_new = sy8824_i2c_probe,
.id_table = sy8824_id,
return ret;
}
-#ifdef CONFIG_OF
static const struct of_device_id sy8827n_dt_ids[] = {
{
.compatible = "silergy,sy8827n",
{ }
};
MODULE_DEVICE_TABLE(of, sy8827n_dt_ids);
-#endif
static const struct i2c_device_id sy8827n_id[] = {
{ "sy8827n", },
static struct i2c_driver sy8827n_regulator_driver = {
.driver = {
.name = "sy8827n-regulator",
- .of_match_table = of_match_ptr(sy8827n_dt_ids),
+ .of_match_table = sy8827n_dt_ids,
},
.probe_new = sy8827n_i2c_probe,
.id_table = sy8827n_id,