ARM: dts: fix RealView EB SMSC ethernet version

The ethernet version in the earlier RealView EB variants is
LAN91C111 and not LAN9118 according to ARM DUI 0303E
"RealView Emulation Baseboard User Guide" page 3-57.

Make sure that this is used for the base variant of the board.

As the DT bindings for LAN91C111 does not specify any power
supplies, these need to be deleted from the DTS file.

Fixes: 2440d29d2ae2 ("ARM: dts: realview: support all the RealView EB board variants")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
index 1c6a040..e2e9599 100644 (file)
--- a/arch/arm/boot/dts/arm-realview-eb.dtsi
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -51,14 +51,6 @@
                regulator-boot-on;
         };
 
-       veth: fixedregulator@0 {
-               compatible = "regulator-fixed";
-               regulator-name = "veth";
-               regulator-min-microvolt = <3300000>;
-               regulator-max-microvolt = <3300000>;
-               regulator-boot-on;
-       };
-
        xtal24mhz: xtal24mhz@24M {
                #clock-cells = <0>;
                compatible = "fixed-clock";
@@ -134,16 +126,15 @@
                bank-width = <4>;
        };
 
-       /* SMSC 9118 ethernet with PHY and EEPROM */
+       /* SMSC LAN91C111 ethernet with PHY and EEPROM */
        ethernet: ethernet@4e000000 {
-               compatible = "smsc,lan9118", "smsc,lan9115";
+               compatible = "smsc,lan91c111";
                reg = <0x4e000000 0x10000>;
-               phy-mode = "mii";
-               reg-io-width = <4>;
-               smsc,irq-active-high;
-               smsc,irq-push-pull;
-               vdd33a-supply = <&veth>;
-               vddvario-supply = <&veth>;
+               /*
+                * This means the adapter can be accessed with 8, 16 or
+                * 32 bit reads/writes.
+                */
+               reg-io-width = <7>;
        };
 
        usb: usb@4f000000 {