Staging: comedi: remove C99 comments in hwdrv_apci1500.c
authorBill Pemberton <wfp5p@virginia.edu>
Fri, 27 Mar 2009 15:29:51 +0000 (11:29 -0400)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 19 Jun 2009 18:00:28 +0000 (11:00 -0700)
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/staging/comedi/drivers/addi-data/hwdrv_apci1500.c

index 3c97ed7..8f2cae9 100644 (file)
@@ -157,16 +157,16 @@ int i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
 
        if (data[0] == 1) {
                i_MaxChannel = 8;
-       }                       // if (data[0] == 1)
+       }                       /*  if (data[0] == 1) */
        else {
                if (data[0] == 2) {
                        i_MaxChannel = 6;
-               }               // if(data[0]==2)
+               }               /*  if(data[0]==2) */
                else {
                        printk("\nThe specified port event  does not exist\n");
                        return -EINVAL;
-               }               //else if(data[0]==2)
-       }                       //else  if (data[0] == 1)
+               }               /* else if(data[0]==2) */
+       }                       /* else  if (data[0] == 1) */
        switch (data[1]) {
        case 0:
                data[1] = APCI1500_AND;
@@ -180,7 +180,7 @@ int i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
        default:
                printk("\nThe specified interrupt logic does not exist\n");
                return -EINVAL;
-       }                       //switch(data[1]);
+       }                       /* switch(data[1]); */
 
        i_Logic = data[1];
        for (i_Count = i_MaxChannel, i = 0; i_Count > 0; i_Count--, i++) {
@@ -224,8 +224,8 @@ int i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
                default:
                        printk("\nThe option indicated in the event mask does not exist\n");
                        return -EINVAL;
-               }               // switch(i_EventMask)
-       }                       //for (i_Count = i_MaxChannel; i_Count >0;i_Count --)
+               }               /*  switch(i_EventMask) */
+       }                       /* for (i_Count = i_MaxChannel; i_Count >0;i_Count --) */
 
        if (data[0] == 1) {
                    /****************************/
@@ -247,7 +247,7 @@ int i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
                              /********************************************/
                                printk("\nTransition error on an OR PRIORITY logic\n");
                                return -EINVAL;
-                       }       // if (data[1]== APCI1500_OR_PRIORITY && i_PatternTransition != 0)
+                       }       /*  if (data[1]== APCI1500_OR_PRIORITY && i_PatternTransition != 0) */
 
                       /*************************************/
                        /* Tests if more than one transition */
@@ -261,7 +261,7 @@ int i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
                                                ((i_PatternTransition >>
                                                        i_Count) & 0x1);
 
-                               }       //for (i_Count = 0; i_Count < 8; i_Count++)
+                               }       /* for (i_Count = 0; i_Count < 8; i_Count++) */
 
                                if (i_PatternTransitionCount > 1) {
                                  /****************************************/
@@ -269,8 +269,8 @@ int i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
                                  /****************************************/
                                        printk("\n Transition error on an AND logic\n");
                                        return -EINVAL;
-                               }       // if (i_PatternTransitionCount > 1)
-                       }       // if (data[1]== APCI1500_AND)
+                               }       /*  if (i_PatternTransitionCount > 1) */
+                       }       /*  if (data[1]== APCI1500_AND) */
 
                            /*****************************************************************/
                        /* Selects the APCI1500_RW_MASTER_CONFIGURATION_CONTROL register */
@@ -359,12 +359,12 @@ int i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
                                devpriv->iobase +
                                APCI1500_Z8536_CONTROL_REGISTER);
 
-               }               // if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY)
+               }               /*  if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY) */
                else {
                        printk("\nThe choice for interrupt logic does not exist\n");
                        return -EINVAL;
-               }               // else }// if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY)
-       }                       //   if (data[0]== 1)
+               }               /*  else }// if(data[1]==APCI1500_AND||data[1]==APCI1500_OR||data[1]==APCI1500_OR_PRIORITY) */
+       }                       /*    if (data[0]== 1) */
 
                 /************************************/
        /* Test if event setting for port 2 */
@@ -487,12 +487,12 @@ int i_APCI1500_ConfigDigitalInputEvent(struct comedi_device * dev,
                        outb(0xF4,
                                devpriv->iobase +
                                APCI1500_Z8536_CONTROL_REGISTER);
-               }               //  if (data[1] == APCI1500_OR)
+               }               /*   if (data[1] == APCI1500_OR) */
                else {
                        printk("\nThe choice for interrupt logic does not exist\n");
                        return -EINVAL;
-               }               //elseif (data[1] == APCI1500_OR)
-       }                       //if(data[0]==2)
+               }               /* elseif (data[1] == APCI1500_OR) */
+       }                       /* if(data[0]==2) */
 
        return insn->n;
 }
@@ -589,12 +589,12 @@ int i_APCI1500_StartStopInputEvent(struct comedi_device * dev, struct comedi_sub
                                                devpriv->iobase +
                                                APCI1500_Z8536_CONTROL_REGISTER);
 
-                               }       // if(i_Event1Status==1)
+                               }       /*  if(i_Event1Status==1) */
                                else {
                                        printk("\nEvent 1 not initialised\n");
                                        return -EINVAL;
-                               }       //else if(i_Event1Status==1)
-                       }       //if (data[1]==1)
+                               }       /* else if(i_Event1Status==1) */
+                       }       /* if (data[1]==1) */
                        if (data[1] == 2) {
 
                                if (i_Event2Status == 1) {
@@ -640,17 +640,17 @@ int i_APCI1500_StartStopInputEvent(struct comedi_device * dev, struct comedi_sub
                                                devpriv->iobase +
                                                APCI1500_Z8536_CONTROL_REGISTER);
                                        i_Event2InterruptStatus = 1;
-                               }       // if(i_Event2Status==1)
+                               }       /*  if(i_Event2Status==1) */
                                else {
                                        printk("\nEvent 2 not initialised\n");
                                        return -EINVAL;
-                               }       //else if(i_Event2Status==1)
-                       }       // if(data[1]==2)
-               }               // if (data[1] == 1 || data[0] == 2)
+                               }       /* else if(i_Event2Status==1) */
+                       }       /*  if(data[1]==2) */
+               }               /*  if (data[1] == 1 || data[0] == 2) */
                else {
                        printk("\nThe port parameter is in error\n");
                        return -EINVAL;
-               }               //else if (data[1] == 1 || data[0] == 2)
+               }               /* else if (data[1] == 1 || data[0] == 2) */
 
                break;
 
@@ -701,12 +701,12 @@ int i_APCI1500_StartStopInputEvent(struct comedi_device * dev, struct comedi_sub
                                                devpriv->iobase +
                                                APCI1500_Z8536_CONTROL_REGISTER);
                                        i_Event1InterruptStatus = 0;
-                               }       // if(i_Event1Status==1)
+                               }       /*  if(i_Event1Status==1) */
                                else {
                                        printk("\nEvent 1 not initialised\n");
                                        return -EINVAL;
-                               }       //else if(i_Event1Status==1)
-                       }       //if (data[1]==1)
+                               }       /* else if(i_Event1Status==1) */
+                       }       /* if (data[1]==1) */
                        if (data[1] == 2) {
                         /*****************************/
                                /* Test if event initialised */
@@ -744,23 +744,23 @@ int i_APCI1500_StartStopInputEvent(struct comedi_device * dev, struct comedi_sub
                                                devpriv->iobase +
                                                APCI1500_Z8536_CONTROL_REGISTER);
                                        i_Event2InterruptStatus = 0;
-                               }       // if(i_Event2Status==1)
+                               }       /*  if(i_Event2Status==1) */
                                else {
                                        printk("\nEvent 2 not initialised\n");
                                        return -EINVAL;
-                               }       //else if(i_Event2Status==1)
-                       }       //if(data[1]==2)
+                               }       /* else if(i_Event2Status==1) */
+                       }       /* if(data[1]==2) */
 
-               }               // if (data[1] == 1 || data[1] == 2)
+               }               /*  if (data[1] == 1 || data[1] == 2) */
                else {
                        printk("\nThe port parameter is in error\n");
                        return -EINVAL;
-               }               //else if (data[1] == 1 || data[1] == 2)
+               }               /* else if (data[1] == 1 || data[1] == 2) */
                break;
        default:
                printk("\nThe option of START/STOP logic does not exist\n");
                return -EINVAL;
-       }                       //switch(data[0])
+       }                       /* switch(data[0]) */
 
        return insn->n;
 }
@@ -973,11 +973,11 @@ int i_APCI1500_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
                                (unsigned int) inw(devpriv->i_IobaseAddon +
                                APCI1500_DIGITAL_IP);
                        *data = (ui_TmpValue >> ui_Channel) & 0x1;
-               }               //if(ui_Channel >= 0 && ui_Channel <=15)
+               }               /* if(ui_Channel >= 0 && ui_Channel <=15) */
                else {
                        printk("\nThe channel specification are in error\n");
-                       return -EINVAL; // "sorry channel spec wrong "
-               }               //else if(ui_Channel >= 0 && ui_Channel <=15)
+                       return -EINVAL; /*  "sorry channel spec wrong " */
+               }               /* else if(ui_Channel >= 0 && ui_Channel <=15) */
                break;
        case 1:
 
@@ -1001,14 +1001,14 @@ int i_APCI1500_ReadMoreDigitalInput(struct comedi_device * dev, struct comedi_su
 
                default:
                        printk("\nSpecified channel cannot be read \n");
-                       return -EINVAL; // "sorry channel spec wrong "
+                       return -EINVAL; /*  "sorry channel spec wrong " */
                        break;
-               }               //switch(ui_Channel)
+               }               /* switch(ui_Channel) */
                break;
        default:
                printk("\nThe specified functionality does not exist\n");
                return -EINVAL;
-       }                       //switch(data[0])
+       }                       /* switch(data[0]) */
        return insn->n;
 }
 
@@ -1073,18 +1073,18 @@ int i_APCI1500_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
        static unsigned int ui_Temp = 0;
        unsigned int ui_Temp1;
 
-       unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec);  // get the channel
+       unsigned int ui_NoOfChannel = CR_CHAN(insn->chanspec);  /*  get the channel */
 
        if (!devpriv->b_OutputMemoryStatus) {
                ui_Temp = 0;
 
-       }                       //if(!devpriv->b_OutputMemoryStatus )
+       }                       /* if(!devpriv->b_OutputMemoryStatus ) */
        if (data[3] == 0) {
                if (data[1] == 0) {
                        data[0] = (data[0] << ui_NoOfChannel) | ui_Temp;
                        outw(data[0],
                                devpriv->i_IobaseAddon + APCI1500_DIGITAL_OP);
-               }               //if(data[1]==0)
+               }               /* if(data[1]==0) */
                else {
                        if (data[1] == 1) {
                                switch (ui_NoOfChannel) {
@@ -1113,19 +1113,19 @@ int i_APCI1500_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
 
                                default:
                                        comedi_error(dev, " chan spec wrong");
-                                       return -EINVAL; // "sorry channel spec wrong "
+                                       return -EINVAL; /*  "sorry channel spec wrong " */
 
-                               }       //switch(ui_NoOfChannels)
+                               }       /* switch(ui_NoOfChannels) */
 
                                outw(data[0],
                                        devpriv->i_IobaseAddon +
                                        APCI1500_DIGITAL_OP);
-                       }       // if(data[1]==1)
+                       }       /*  if(data[1]==1) */
                        else {
                                printk("\nSpecified channel not supported\n");
-                       }       //else if(data[1]==1)
-               }               //elseif(data[1]==0)
-       }                       //if(data[3]==0)
+                       }       /* else if(data[1]==1) */
+               }               /* elseif(data[1]==0) */
+       }                       /* if(data[3]==0) */
        else {
                if (data[3] == 1) {
                        if (data[1] == 0) {
@@ -1140,7 +1140,7 @@ int i_APCI1500_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
                                outw(data[0],
                                        devpriv->i_IobaseAddon +
                                        APCI1500_DIGITAL_OP);
-                       }       //if(data[1]==0)
+                       }       /* if(data[1]==0) */
                        else {
                                if (data[1] == 1) {
                                        switch (ui_NoOfChannel) {
@@ -1190,24 +1190,24 @@ int i_APCI1500_WriteDigitalOutput(struct comedi_device * dev, struct comedi_subd
                                        default:
                                                comedi_error(dev,
                                                        " chan spec wrong");
-                                               return -EINVAL; // "sorry channel spec wrong "
+                                               return -EINVAL; /*  "sorry channel spec wrong " */
 
-                                       }       //switch(ui_NoOfChannels)
+                                       }       /* switch(ui_NoOfChannels) */
 
                                        outw(data[0],
                                                devpriv->i_IobaseAddon +
                                                APCI1500_DIGITAL_OP);
-                               }       // if(data[1]==1)
+                               }       /*  if(data[1]==1) */
                                else {
                                        printk("\nSpecified channel not supported\n");
-                               }       //else if(data[1]==1)
-                       }       //elseif(data[1]==0)
-               }               //if(data[3]==1);
+                               }       /* else if(data[1]==1) */
+                       }       /* elseif(data[1]==0) */
+               }               /* if(data[3]==1); */
                else {
                        printk("\nSpecified functionality does not exist\n");
                        return -EINVAL;
-               }               //if else data[3]==1)
-       }                       //if else data[3]==0)
+               }               /* if else data[3]==1) */
+       }                       /* if else data[3]==0) */
        ui_Temp = data[0];
        return (insn->n);;
 }
@@ -1268,20 +1268,20 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
 
        devpriv->tsk_Current = current;
 
-//Selection of the input clock
+/* Selection of the input clock */
        if (data[0] == 0 || data[0] == 1 || data[0] == 2) {
                outw(data[0], devpriv->i_IobaseAddon + APCI1500_CLK_SELECT);
-       }                       // if(data[0]==0||data[0]==1||data[0]==2)
+       }                       /*  if(data[0]==0||data[0]==1||data[0]==2) */
        else {
                if (data[0] != 3) {
                        printk("\nThe option for input clock selection does not exist\n");
                        return -EINVAL;
-               }               // if(data[0]!=3)
-       }                       //elseif(data[0]==0||data[0]==1||data[0]==2)
-       //Select the counter/timer
+               }               /*  if(data[0]!=3) */
+       }                       /* elseif(data[0]==0||data[0]==1||data[0]==2) */
+       /* Select the counter/timer */
        switch (data[1]) {
        case COUNTER1:
-               //selecting counter or timer
+               /* selecting counter or timer */
                switch (data[2]) {
                case 0:
                        data[2] = APCI1500_COUNTER;
@@ -1292,9 +1292,9 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
                default:
                        printk("\nThis choice is not a timer nor a counter\n");
                        return -EINVAL;
-               }               // switch(data[2])
+               }               /*  switch(data[2]) */
 
-               //Selecting  single or continuous mode
+               /* Selecting  single or continuous mode */
                switch (data[4]) {
                case 0:
                        data[4] = APCI1500_CONTINUOUS;
@@ -1305,7 +1305,7 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
                default:
                        printk("\nThis option for single/continuous mode does not exist\n");
                        return -EINVAL;
-               }               // switch(data[4])
+               }               /*  switch(data[4]) */
 
                i_TimerCounterMode = data[2] | data[4] | 7;
                         /*************************/
@@ -1428,21 +1428,21 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
                                outb(0x2,
                                        devpriv->iobase +
                                        APCI1500_Z8536_CONTROL_REGISTER);
-                       }       //if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE)
+                       }       /* if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
                        else {
                                printk("\nError in selection of interrupt enable or disable\n");
                                return -EINVAL;
-                       }       //elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE)
-               }               // if ((data[3]>= 0) && (data[3] <= 65535))
+                       }       /* elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
+               }               /*  if ((data[3]>= 0) && (data[3] <= 65535)) */
                else {
                        printk("\nError in selection of reload value\n");
                        return -EINVAL;
-               }               //else if ((data[3]>= 0) && (data[3] <= 65535))
+               }               /* else if ((data[3]>= 0) && (data[3] <= 65535)) */
                i_TimerCounterWatchdogInterrupt = data[7];
                i_TimerCounter1Init = 1;
                break;
 
-       case COUNTER2:          //selecting counter or timer
+       case COUNTER2:          /* selecting counter or timer */
                switch (data[2]) {
                case 0:
                        data[2] = APCI1500_COUNTER;
@@ -1453,9 +1453,9 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
                default:
                        printk("\nThis choice is not a timer nor a counter\n");
                        return -EINVAL;
-               }               // switch(data[2])
+               }               /*  switch(data[2]) */
 
-               //Selecting  single or continuous mode
+               /* Selecting  single or continuous mode */
                switch (data[4]) {
                case 0:
                        data[4] = APCI1500_CONTINUOUS;
@@ -1466,9 +1466,9 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
                default:
                        printk("\nThis option for single/continuous mode does not exist\n");
                        return -EINVAL;
-               }               // switch(data[4])
+               }               /*  switch(data[4]) */
 
-               //Selecting  software or hardware trigger
+               /* Selecting  software or hardware trigger */
                switch (data[5]) {
                case 0:
                        data[5] = APCI1500_SOFTWARE_TRIGGER;
@@ -1479,9 +1479,9 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
                default:
                        printk("\nThis choice for software or hardware trigger does not exist\n");
                        return -EINVAL;
-               }               // switch(data[5])
+               }               /*  switch(data[5]) */
 
-               //Selecting  software or hardware gate
+               /* Selecting  software or hardware gate */
                switch (data[6]) {
                case 0:
                        data[6] = APCI1500_SOFTWARE_GATE;
@@ -1492,7 +1492,7 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
                default:
                        printk("\nThis choice for software or hardware gate does not exist\n");
                        return -EINVAL;
-               }               // switch(data[6])
+               }               /*  switch(data[6]) */
 
                i_TimerCounterMode = data[2] | data[4] | data[5] | data[6] | 7;
 
@@ -1616,21 +1616,21 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
                                outb(0x2,
                                        devpriv->iobase +
                                        APCI1500_Z8536_CONTROL_REGISTER);
-                       }       //if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE)
+                       }       /* if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
                        else {
                                printk("\nError in selection of interrupt enable or disable\n");
                                return -EINVAL;
-                       }       //elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE)
-               }               // if ((data[3]>= 0) && (data[3] <= 65535))
+                       }       /* elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
+               }               /*  if ((data[3]>= 0) && (data[3] <= 65535)) */
                else {
                        printk("\nError in selection of reload value\n");
                        return -EINVAL;
-               }               //else if ((data[3]>= 0) && (data[3] <= 65535))
+               }               /* else if ((data[3]>= 0) && (data[3] <= 65535)) */
                i_TimerCounterWatchdogInterrupt = data[7];
                i_TimerCounter2Init = 1;
                break;
 
-       case COUNTER3:          //selecting counter or watchdog
+       case COUNTER3:          /* selecting counter or watchdog */
                switch (data[2]) {
                case 0:
                        data[2] = APCI1500_COUNTER;
@@ -1641,9 +1641,9 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
                default:
                        printk("\nThis choice is not a watchdog nor a counter\n");
                        return -EINVAL;
-               }               // switch(data[2])
+               }               /*  switch(data[2]) */
 
-               //Selecting  single or continuous mode
+               /* Selecting  single or continuous mode */
                switch (data[4]) {
                case 0:
                        data[4] = APCI1500_CONTINUOUS;
@@ -1654,9 +1654,9 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
                default:
                        printk("\nThis option for single/continuous mode does not exist\n");
                        return -EINVAL;
-               }               // switch(data[4])
+               }               /*  switch(data[4]) */
 
-               //Selecting  software or hardware gate
+               /* Selecting  software or hardware gate */
                switch (data[6]) {
                case 0:
                        data[6] = APCI1500_SOFTWARE_GATE;
@@ -1667,7 +1667,7 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
                default:
                        printk("\nThis choice for software or hardware gate does not exist\n");
                        return -EINVAL;
-               }               // switch(data[6])
+               }               /*  switch(data[6]) */
 
                      /*****************************/
                /* Test if used for watchdog */
@@ -1680,10 +1680,10 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
                        /* - Pulses output           */
                             /*****************************/
                        i_TimerCounterMode = data[2] | data[4] | 0x54;
-               }               //if (data[2] == APCI1500_WATCHDOG)
+               }               /* if (data[2] == APCI1500_WATCHDOG) */
                else {
                        i_TimerCounterMode = data[2] | data[4] | data[6] | 7;
-               }               //elseif (data[2] == APCI1500_WATCHDOG)
+               }               /* elseif (data[2] == APCI1500_WATCHDOG) */
                                 /*************************/
                /* Test the reload value */
                             /*************************/
@@ -1809,25 +1809,25 @@ int i_APCI1500_ConfigCounterTimerWatchdog(struct comedi_device * dev,
                                                devpriv->iobase +
                                                APCI1500_Z8536_CONTROL_REGISTER);
 
-                               }       //elseif(data[2]==APCI1500_COUNTER)
+                               }       /* elseif(data[2]==APCI1500_COUNTER) */
 
-                       }       //if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE)
+                       }       /* if(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
                        else {
                                printk("\nError in selection of interrupt enable or disable\n");
                                return -EINVAL;
-                       }       //elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE)
-               }               // if ((data[3]>= 0) && (data[3] <= 65535))
+                       }       /* elseif(data[7]== APCI1500_ENABLE ||data[7]== APCI1500_DISABLE) */
+               }               /*  if ((data[3]>= 0) && (data[3] <= 65535)) */
                else {
                        printk("\nError in selection of reload value\n");
                        return -EINVAL;
-               }               //else if ((data[3]>= 0) && (data[3] <= 65535))
+               }               /* else if ((data[3]>= 0) && (data[3] <= 65535)) */
                i_TimerCounterWatchdogInterrupt = data[7];
                i_WatchdogCounter3Init = 1;
                break;
 
        default:
                printk("\nThe specified counter\timer option does not exist\n");
-       }                       //switch(data[1])
+       }                       /* switch(data[1]) */
        i_CounterLogic = data[2];
        return insn->n;
 }
@@ -1871,11 +1871,11 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
                case START:
                        if (i_TimerCounter1Init == 1) {
                                if (i_TimerCounterWatchdogInterrupt == 1) {
-                                       i_CommandAndStatusValue = 0xC4; //Enable the interrupt
-                               }       // if(i_TimerCounterWatchdogInterrupt==1)
+                                       i_CommandAndStatusValue = 0xC4; /* Enable the interrupt */
+                               }       /*  if(i_TimerCounterWatchdogInterrupt==1) */
                                else {
-                                       i_CommandAndStatusValue = 0xE4; //disable the interrupt
-                               }       //elseif(i_TimerCounterWatchdogInterrupt==1)
+                                       i_CommandAndStatusValue = 0xE4; /* disable the interrupt */
+                               }       /* elseif(i_TimerCounterWatchdogInterrupt==1) */
                                              /**************************/
                                /* Starts timer/counter 1 */
                                              /**************************/
@@ -1889,7 +1889,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
                                outb(i_CommandAndStatusValue,
                                        devpriv->iobase +
                                        APCI1500_Z8536_CONTROL_REGISTER);
-                       }       //if( i_TimerCounter1Init==1)
+                       }       /* if( i_TimerCounter1Init==1) */
                        else {
                                printk("\nCounter/Timer1 not configured\n");
                                return -EINVAL;
@@ -1922,14 +1922,14 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
                                                 /************************/
 
                                        i_CommandAndStatusValue = 0x6;
-                               }       //if( i_TimerCounter1Enabled==1)
+                               }       /* if( i_TimerCounter1Enabled==1) */
                                else {
                                                   /***************/
                                        /* Set Trigger */
                                                   /***************/
 
                                        i_CommandAndStatusValue = 0x2;
-                               }       //elseif(i_TimerCounter1Enabled==1)
+                               }       /* elseif(i_TimerCounter1Enabled==1) */
 
                                                /********************************************/
                                /* Selects the commands and status register */
@@ -1940,7 +1940,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
                                outb(i_CommandAndStatusValue,
                                        devpriv->iobase +
                                        APCI1500_Z8536_CONTROL_REGISTER);
-                       }       //if( i_TimerCounter1Init==1)
+                       }       /* if( i_TimerCounter1Init==1) */
                        else {
                                printk("\nCounter/Timer1 not configured\n");
                                return -EINVAL;
@@ -1950,7 +1950,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
                default:
                        printk("\nThe specified option for start/stop/trigger does not exist\n");
                        return -EINVAL;
-               }               //switch(data[1])
+               }               /* switch(data[1]) */
                break;
 
        case COUNTER2:
@@ -1958,11 +1958,11 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
                case START:
                        if (i_TimerCounter2Init == 1) {
                                if (i_TimerCounterWatchdogInterrupt == 1) {
-                                       i_CommandAndStatusValue = 0xC4; //Enable the interrupt
-                               }       // if(i_TimerCounterWatchdogInterrupt==1)
+                                       i_CommandAndStatusValue = 0xC4; /* Enable the interrupt */
+                               }       /*  if(i_TimerCounterWatchdogInterrupt==1) */
                                else {
-                                       i_CommandAndStatusValue = 0xE4; //disable the interrupt
-                               }       //elseif(i_TimerCounterWatchdogInterrupt==1)
+                                       i_CommandAndStatusValue = 0xE4; /* disable the interrupt */
+                               }       /* elseif(i_TimerCounterWatchdogInterrupt==1) */
                                              /**************************/
                                /* Starts timer/counter 2 */
                                              /**************************/
@@ -1976,7 +1976,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
                                outb(i_CommandAndStatusValue,
                                        devpriv->iobase +
                                        APCI1500_Z8536_CONTROL_REGISTER);
-                       }       //if( i_TimerCounter2Init==1)
+                       }       /* if( i_TimerCounter2Init==1) */
                        else {
                                printk("\nCounter/Timer2 not configured\n");
                                return -EINVAL;
@@ -2008,14 +2008,14 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
                                                 /************************/
 
                                        i_CommandAndStatusValue = 0x6;
-                               }       //if( i_TimerCounter2Enabled==1)
+                               }       /* if( i_TimerCounter2Enabled==1) */
                                else {
                                                   /***************/
                                        /* Set Trigger */
                                                   /***************/
 
                                        i_CommandAndStatusValue = 0x2;
-                               }       //elseif(i_TimerCounter2Enabled==1)
+                               }       /* elseif(i_TimerCounter2Enabled==1) */
 
                                                /********************************************/
                                /* Selects the commands and status register */
@@ -2026,7 +2026,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
                                outb(i_CommandAndStatusValue,
                                        devpriv->iobase +
                                        APCI1500_Z8536_CONTROL_REGISTER);
-                       }       //if( i_TimerCounter2Init==1)
+                       }       /* if( i_TimerCounter2Init==1) */
                        else {
                                printk("\nCounter/Timer2 not configured\n");
                                return -EINVAL;
@@ -2035,7 +2035,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
                default:
                        printk("\nThe specified option for start/stop/trigger does not exist\n");
                        return -EINVAL;
-               }               //switch(data[1])
+               }               /* switch(data[1]) */
                break;
        case COUNTER3:
                switch (data[1]) {
@@ -2043,11 +2043,11 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
                        if (i_WatchdogCounter3Init == 1) {
 
                                if (i_TimerCounterWatchdogInterrupt == 1) {
-                                       i_CommandAndStatusValue = 0xC4; //Enable the interrupt
-                               }       // if(i_TimerCounterWatchdogInterrupt==1)
+                                       i_CommandAndStatusValue = 0xC4; /* Enable the interrupt */
+                               }       /*  if(i_TimerCounterWatchdogInterrupt==1) */
                                else {
-                                       i_CommandAndStatusValue = 0xE4; //disable the interrupt
-                               }       //elseif(i_TimerCounterWatchdogInterrupt==1)
+                                       i_CommandAndStatusValue = 0xE4; /* disable the interrupt */
+                               }       /* elseif(i_TimerCounterWatchdogInterrupt==1) */
                                              /**************************/
                                /* Starts Watchdog/counter 3 */
                                              /**************************/
@@ -2062,7 +2062,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
                                        devpriv->iobase +
                                        APCI1500_Z8536_CONTROL_REGISTER);
 
-                       }       // if( i_WatchdogCounter3init==1)
+                       }       /*  if( i_WatchdogCounter3init==1) */
                        else {
                                printk("\nWatchdog/Counter3 not configured\n");
                                return -EINVAL;
@@ -2089,7 +2089,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
 
                case TRIGGER:
                        switch (data[2]) {
-                       case 0: //triggering counter 3
+                       case 0: /* triggering counter 3 */
                                if (i_WatchdogCounter3Init == 1) {
                                        if (i_WatchdogCounter3Enabled == 1) {
                                                               /************************/
@@ -2097,14 +2097,14 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
                                                               /************************/
 
                                                i_CommandAndStatusValue = 0x6;
-                                       }       //if( i_WatchdogCounter3Enabled==1)
+                                       }       /* if( i_WatchdogCounter3Enabled==1) */
                                        else {
                                                           /***************/
                                                /* Set Trigger */
                                                           /***************/
 
                                                i_CommandAndStatusValue = 0x2;
-                                       }       //elseif(i_WatchdogCounter3Enabled==1)
+                                       }       /* elseif(i_WatchdogCounter3Enabled==1) */
 
                                                /********************************************/
                                        /* Selects the commands and status register */
@@ -2115,14 +2115,14 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
                                        outb(i_CommandAndStatusValue,
                                                devpriv->iobase +
                                                APCI1500_Z8536_CONTROL_REGISTER);
-                               }       //if( i_WatchdogCounter3Init==1)
+                               }       /* if( i_WatchdogCounter3Init==1) */
                                else {
                                        printk("\nCounter3 not configured\n");
                                        return -EINVAL;
                                }
                                break;
                        case 1:
-                               //triggering Watchdog 3
+                               /* triggering Watchdog 3 */
                                if (i_WatchdogCounter3Init == 1) {
 
                                                /********************************************/
@@ -2134,7 +2134,7 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
                                        outb(0x6,
                                                devpriv->iobase +
                                                APCI1500_Z8536_CONTROL_REGISTER);
-                               }       //if( i_WatchdogCounter3Init==1)
+                               }       /* if( i_WatchdogCounter3Init==1) */
                                else {
                                        printk("\nWatchdog 3 not configured\n");
                                        return -EINVAL;
@@ -2143,17 +2143,17 @@ int i_APCI1500_StartStopTriggerTimerCounterWatchdog(struct comedi_device * dev,
                        default:
                                printk("\nWrong choice of watchdog/counter3\n");
                                return -EINVAL;
-                       }       //switch(data[2])
+                       }       /* switch(data[2]) */
                        break;
                default:
                        printk("\nThe specified option for start/stop/trigger does not exist\n");
                        return -EINVAL;
-               }               //switch(data[1])
+               }               /* switch(data[1]) */
                break;
        default:
                printk("\nThe specified choice for counter/watchdog/timer does not exist\n");
                return -EINVAL;
-       }                       //switch(data[0])
+       }                       /* switch(data[0]) */
        return insn->n;
 }
 
@@ -2188,7 +2188,7 @@ int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device * dev,
        int i_CommandAndStatusValue;
        switch (data[0]) {
        case COUNTER1:
-               //Read counter/timer1
+               /* Read counter/timer1 */
                if (i_TimerCounter1Init == 1) {
                        if (i_TimerCounter1Enabled == 1) {
                  /************************/
@@ -2196,14 +2196,14 @@ int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device * dev,
                  /************************/
 
                                i_CommandAndStatusValue = 0xC;
-                       }       //if( i_TimerCounter1Init==1)
+                       }       /* if( i_TimerCounter1Init==1) */
                        else {
                    /***************/
                                /* Set RCC */
                    /***************/
 
                                i_CommandAndStatusValue = 0x8;
-                       }       //elseif(i_TimerCounter1Init==1)
+                       }       /* elseif(i_TimerCounter1Init==1) */
 
                /********************************************/
                        /* Selects the commands and status register */
@@ -2232,14 +2232,14 @@ int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device * dev,
                        data[0] =
                                data[0] | inb(devpriv->iobase +
                                APCI1500_Z8536_CONTROL_REGISTER);
-               }               //if( i_TimerCounter1Init==1)
+               }               /* if( i_TimerCounter1Init==1) */
                else {
                        printk("\nTimer/Counter1 not configured\n");
                        return -EINVAL;
-               }               //elseif( i_TimerCounter1Init==1)
+               }               /* elseif( i_TimerCounter1Init==1) */
                break;
        case COUNTER2:
-               //Read counter/timer2
+               /* Read counter/timer2 */
                if (i_TimerCounter2Init == 1) {
                        if (i_TimerCounter2Enabled == 1) {
                  /************************/
@@ -2247,14 +2247,14 @@ int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device * dev,
                  /************************/
 
                                i_CommandAndStatusValue = 0xC;
-                       }       //if( i_TimerCounter2Init==1)
+                       }       /* if( i_TimerCounter2Init==1) */
                        else {
                    /***************/
                                /* Set RCC */
                    /***************/
 
                                i_CommandAndStatusValue = 0x8;
-                       }       //elseif(i_TimerCounter2Init==1)
+                       }       /* elseif(i_TimerCounter2Init==1) */
 
                /********************************************/
                        /* Selects the commands and status register */
@@ -2283,14 +2283,14 @@ int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device * dev,
                        data[0] =
                                data[0] | inb(devpriv->iobase +
                                APCI1500_Z8536_CONTROL_REGISTER);
-               }               //if( i_TimerCounter2Init==1)
+               }               /* if( i_TimerCounter2Init==1) */
                else {
                        printk("\nTimer/Counter2 not configured\n");
                        return -EINVAL;
-               }               //elseif( i_TimerCounter2Init==1)
+               }               /* elseif( i_TimerCounter2Init==1) */
                break;
        case COUNTER3:
-               //Read counter/watchdog2
+               /* Read counter/watchdog2 */
                if (i_WatchdogCounter3Init == 1) {
                        if (i_WatchdogCounter3Enabled == 1) {
                  /************************/
@@ -2298,14 +2298,14 @@ int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device * dev,
                  /************************/
 
                                i_CommandAndStatusValue = 0xC;
-                       }       //if( i_TimerCounter2Init==1)
+                       }       /* if( i_TimerCounter2Init==1) */
                        else {
                    /***************/
                                /* Set RCC */
                    /***************/
 
                                i_CommandAndStatusValue = 0x8;
-                       }       //elseif(i_WatchdogCounter3Init==1)
+                       }       /* elseif(i_WatchdogCounter3Init==1) */
 
                /********************************************/
                        /* Selects the commands and status register */
@@ -2334,16 +2334,16 @@ int i_APCI1500_ReadCounterTimerWatchdog(struct comedi_device * dev,
                        data[0] =
                                data[0] | inb(devpriv->iobase +
                                APCI1500_Z8536_CONTROL_REGISTER);
-               }               //if( i_WatchdogCounter3Init==1)
+               }               /* if( i_WatchdogCounter3Init==1) */
                else {
                        printk("\nWatchdogCounter3 not configured\n");
                        return -EINVAL;
-               }               //elseif( i_WatchdogCounter3Init==1)
+               }               /* elseif( i_WatchdogCounter3Init==1) */
                break;
        default:
                printk("\nThe choice of timer/counter/watchdog does not exist\n");
                return -EINVAL;
-       }                       //switch(data[0])
+       }                       /* switch(data[0]) */
 
        return insn->n;
 }
@@ -2411,16 +2411,16 @@ int i_APCI1500_ConfigureInterrupt(struct comedi_device * dev, struct comedi_subd
        outl(0x0, devpriv->i_IobaseAmcc + 0x38);
        if (data[0] == 1) {
                i_Constant = 0xC0;
-       }                       //if(data[0]==1)
+       }                       /* if(data[0]==1) */
        else {
                if (data[0] == 0) {
                        i_Constant = 0x00;
-               }               //if{data[0]==0)
+               }               /* if{data[0]==0) */
                else {
                        printk("\nThe parameter passed to driver is in error for enabling the voltage interrupt\n");
                        return -EINVAL;
-               }               //else if(data[0]==0)
-       }                       //elseif(data[0]==1)
+               }               /* else if(data[0]==0) */
+       }                       /* elseif(data[0]==1) */
 
         /*****************************************************/
        /* Selects the mode specification register of port B */
@@ -2599,11 +2599,11 @@ static void v_APCI1500_Interrupt(int irq, void *d)
       /*************************************************/
                /* Selects the master interrupt control register */
       /*************************************************/
-               //outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL,devpriv->iobase+APCI1500_Z8536_CONTROL_REGISTER);
+               /* outb(APCI1500_RW_MASTER_INTERRUPT_CONTROL,devpriv->iobase+APCI1500_Z8536_CONTROL_REGISTER); */
        /**********************************************/
                /* Disables  the main interrupt on the board */
        /**********************************************/
-               //outb(0x00,devpriv->iobase+APCI1500_Z8536_CONTROL_REGISTER);
+               /* outb(0x00,devpriv->iobase+APCI1500_Z8536_CONTROL_REGISTER); */
 
    /*****************************************************/
                /* Selects the command and status register of port A */
@@ -2647,11 +2647,11 @@ static void v_APCI1500_Interrupt(int irq, void *d)
 
                                i_InputChannel = 1 + (i_RegValue >> 1);
 
-                       }       // if(i_Logic==APCI1500_OR_PRIORITY)
+                       }       /*  if(i_Logic==APCI1500_OR_PRIORITY) */
                        else {
                                i_InputChannel = 0;
-                       }       //elseif(i_Logic==APCI1500_OR_PRIORITY)
-               }               // if ((i_RegValue & 0x60) == 0x60)
+                       }       /* elseif(i_Logic==APCI1500_OR_PRIORITY) */
+               }               /*  if ((i_RegValue & 0x60) == 0x60) */
 
           /*****************************************************/
                /* Selects the command and status register of port B */
@@ -2688,7 +2688,7 @@ static void v_APCI1500_Interrupt(int irq, void *d)
              /**************************************/
 
                        if (i_RegValue) {
-                               //Disable the interrupt
+                               /* Disable the interrupt */
                     /*****************************************************/
                                /* Selects the command and status register of port B */
                     /*****************************************************/
@@ -2697,17 +2697,17 @@ static void v_APCI1500_Interrupt(int irq, void *d)
                                if (i_RegValue & 0x80) {
                                        i_InterruptMask =
                                                i_InterruptMask | 0x40;
-                               }       //if (i_RegValue & 0x80)
+                               }       /* if (i_RegValue & 0x80) */
 
                                if (i_RegValue & 0x40) {
                                        i_InterruptMask =
                                                i_InterruptMask | 0x80;
-                               }       //if (i_RegValue & 0x40)
-                       }       // if (i_RegValue)
+                               }       /* if (i_RegValue & 0x40) */
+                       }       /*  if (i_RegValue) */
                        else {
                                i_InterruptMask = i_InterruptMask | 2;
-                       }       // if (i_RegValue)
-               }               //if ((i_RegValue & 0x60) == 0x60)
+                       }       /*  if (i_RegValue) */
+               }               /* if ((i_RegValue & 0x60) == 0x60) */
 
                /*****************************************************/
                /* Selects the command and status register of timer 1 */
@@ -2731,7 +2731,7 @@ static void v_APCI1500_Interrupt(int irq, void *d)
                                devpriv->iobase +
                                APCI1500_Z8536_CONTROL_REGISTER);
                        i_InterruptMask = i_InterruptMask | 4;
-               }               // if ((i_RegValue & 0x60) == 0x60)
+               }               /*  if ((i_RegValue & 0x60) == 0x60) */
                /*****************************************************/
                /* Selects the command and status register of timer 2 */
                /*****************************************************/
@@ -2754,7 +2754,7 @@ static void v_APCI1500_Interrupt(int irq, void *d)
                                devpriv->iobase +
                                APCI1500_Z8536_CONTROL_REGISTER);
                        i_InterruptMask = i_InterruptMask | 8;
-               }               // if ((i_RegValue & 0x60) == 0x60)
+               }               /*  if ((i_RegValue & 0x60) == 0x60) */
 
                /*****************************************************/
                /* Selects the command and status register of timer 3 */
@@ -2779,13 +2779,13 @@ static void v_APCI1500_Interrupt(int irq, void *d)
                                APCI1500_Z8536_CONTROL_REGISTER);
                        if (i_CounterLogic == APCI1500_COUNTER) {
                                i_InterruptMask = i_InterruptMask | 0x10;
-                       }       //if(i_CounterLogic==APCI1500_COUNTER)
+                       }       /* if(i_CounterLogic==APCI1500_COUNTER) */
                        else {
                                i_InterruptMask = i_InterruptMask | 0x20;
                        }
-               }               // if ((i_RegValue & 0x60) == 0x60)
+               }               /*  if ((i_RegValue & 0x60) == 0x60) */
 
-               send_sig(SIGIO, devpriv->tsk_Current, 0);       // send signal to the sample
+               send_sig(SIGIO, devpriv->tsk_Current, 0);       /*  send signal to the sample */
               /***********************/
                /* Enable all Interrupts */
               /***********************/
@@ -2799,11 +2799,11 @@ static void v_APCI1500_Interrupt(int irq, void *d)
                /* Authorizes the main interrupt on the board */
               /**********************************************/
                outb(0xD0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
-       }                       //  if ((ui_InterruptStatus & 0x800000) == 0x800000)
+       }                       /*   if ((ui_InterruptStatus & 0x800000) == 0x800000) */
        else {
                printk("\nInterrupt from unknown source\n");
 
-       }                       //else if ((ui_InterruptStatus & 0x800000) == 0x800000)
+       }                       /* else if ((ui_InterruptStatus & 0x800000) == 0x800000) */
        return;
 }
 
@@ -2982,7 +2982,7 @@ int i_APCI1500_Reset(struct comedi_device * dev)
                devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
        /* Deletes all interrupts */
        outb(0, devpriv->iobase + APCI1500_Z8536_CONTROL_REGISTER);
-       //reset all the digital outputs
+       /* reset all the digital outputs */
        outw(0x0, devpriv->i_IobaseAddon + APCI1500_DIGITAL_OP);
 /*******************************/
 /* Disable the board interrupt */